{"title":"45° Rubber Elbows","description":"\u003cp\u003e45 degree rubber elbows make the gentler turns in air intake ducting on trucks, tractors, gensets and earthmoving gear, where a run only needs to change direction partway or step sideways around an obstruction. Used in pairs, they create an offset that a single 90 degree bend can't. Like other intake hose, they're moulded from heat- and ozone-resistant rubber that flexes with engine movement while keeping filtered air sealed in. Measure the outside diameter of the tube each end slides over, then clamp both ends properly. A split, soft or loose elbow on the clean side lets unfiltered dust straight into the engine, and because a leak lowers restriction rather than raising it, the indicator won't warn you.\u003c\/p\u003e","products":[{"product_id":"p114313","title":"P114313 Rubber Elbow, 45 degree, 254 mm \/ 10.00 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P114313 makes a 45 degree turn in 254 mm (10.00 in) inside-diameter pipe on a 216 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. At this size the rubber is ribbed or compounded for extra strength. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 9 OEM and aftermarket brands, including Liebherr 5611264, Ingersoll Rand 57690091 and Mack 2191P114313. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954937987151,"sku":"P114313","price":337.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p114313-45-degree-rubber-elbow.jpg?v=1793486394"},{"product_id":"p105542","title":"P105542 Rubber Elbow, 45 degree, 57 mm \/ 2.25 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P105542 makes a 45 degree turn in 57 mm (2.25 in) inside-diameter pipe on a 57 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 19 OEM and aftermarket brands, including Caterpillar 0692201, Atlas Copco HOS00472 and Ingersoll Rand 59512772. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954938085455,"sku":"P105542","price":53.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p105542-45-degree-rubber-elbow.jpg?v=1793486391"},{"product_id":"p114316","title":"P114316 Rubber Elbow, 45 degree, 114 mm \/ 4.50 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P114316 makes a 45 degree turn in 114 mm (4.50 in) inside-diameter pipe on an 89 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 24 OEM and aftermarket brands, including MAN Truck \u0026amp; Bus SE 56082070506, Deutz 71183499 and AGCO 71183499. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954938118223,"sku":"P114316","price":67.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p114316-rubber-elbow-45-degree.jpg?v=1794951591"},{"product_id":"p105543","title":"P105543 Rubber Elbow, 45 degree, 64 mm \/ 2.50 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P105543 makes a 45 degree turn in 64 mm (2.50 in) inside-diameter pipe on a 64 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 29 OEM and aftermarket brands, including Caterpillar 5W6110, Case IH NP105543 and Komatsu 3EB01F1120. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954938183759,"sku":"P105543","price":53.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p105543-45-degree-rubber-elbow.jpg?v=1793486386"},{"product_id":"p105541","title":"P105541 Rubber Elbow, 45 degree, 51 mm \/ 2.00 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P105541 makes a 45 degree turn in 51 mm (2.00 in) inside-diameter pipe on a 51 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 31 OEM and aftermarket brands, including Volvo M25370705, Scania LO2899 and Terex 2115535. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954938675279,"sku":"P105541","price":46.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p105541-45-degree-rubber-elbow.jpg?v=1793486384"},{"product_id":"p109331","title":"P109331 Rubber Elbow, 45 degree, 89 mm \/ 3.50 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P109331 makes a 45 degree turn in 89 mm (3.50 in) inside-diameter pipe on an 89 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 32 OEM and aftermarket brands, including Case IH NP109331, Liebherr 550796714 and Ingersoll Rand 10684116. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954939560015,"sku":"P109331","price":59.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p109331-45-degree-rubber-elbow.jpg?v=1793486380"},{"product_id":"p112606","title":"P112606 Rubber Elbow, 45 degree, 203 mm \/ 8.00 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P112606 makes a 45 degree turn in 203 mm (8.00 in) inside-diameter pipe on a 165 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. At this size the rubber is ribbed or compounded for extra strength. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 34 OEM and aftermarket brands, including Caterpillar 3019255, Volvo 11192142 and Komatsu 36817940. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954939592783,"sku":"P112606","price":201.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p112606-45-degree-rubber-elbow.jpg?v=1793486307"},{"product_id":"p105546","title":"P105546 Rubber Elbow, 45 degree, 140 mm \/ 5.50 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P105546 makes a 45 degree turn in 140 mm (5.50 in) inside-diameter pipe on a 121 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. At this size the rubber is ribbed or compounded for extra strength. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 41 OEM and aftermarket brands, including Caterpillar 775674, Case IH L024691 and Komatsu 27040840. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954939691087,"sku":"P105546","price":70.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p105546-45-degree-rubber-elbow.jpg?v=1793486305"},{"product_id":"p105548","title":"P105548 Rubber Elbow, 45 degree, 178 mm \/ 7.00 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P105548 makes a 45 degree turn in 178 mm (7.00 in) inside-diameter pipe on a 141 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. At this size the rubber is ribbed or compounded for extra strength. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 51 OEM and aftermarket brands, including Caterpillar 1077529, Case IH S097880 and Volvo 15127718. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954940051535,"sku":"P105548","price":112.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p105548-45-degree-rubber-elbow.jpg?v=1793486302"},{"product_id":"p105544","title":"P105544 Rubber Elbow, 45 degree, 76 mm \/ 3.00 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P105544 makes a 45 degree turn in 76 mm (3.00 in) inside-diameter pipe on a 95 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 80 OEM and aftermarket brands, including Case IH D50919, Komatsu 308858 and Cummins CDD000114. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954940149839,"sku":"P105544","price":45.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p105544-45-degree-rubber-elbow.jpg?v=1793486299"},{"product_id":"p105545","title":"P105545 Rubber Elbow, 45 degree, 102 mm \/ 4.00 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P105545 makes a 45 degree turn in 102 mm (4.00 in) inside-diameter pipe on a 108 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 83 OEM and aftermarket brands, including Caterpillar 10031819, John Deere 810927300 and Case IH S091499. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954943131727,"sku":"P105545","price":57.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p105545-45-degree-rubber-elbow.jpg?v=1793486296"},{"product_id":"p109021","title":"P109021 Rubber Elbow, 45 degree, 127 mm \/ 5.00 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P109021 makes a 45 degree turn in 127 mm (5.00 in) inside-diameter pipe on a 114 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. At this size the rubber is ribbed or compounded for extra strength. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 75 OEM and aftermarket brands, including Case IH NP109021, Volvo 11302566 and Komatsu 308938. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954943164495,"sku":"P109021","price":63.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p109021-45-degree-rubber-elbow.jpg?v=1793486295"},{"product_id":"p105547","title":"P105547 Rubber Elbow, 45 degree, 152 mm \/ 6.00 in diameter","description":"\u003cp\u003eNot every bend in an intake run needs a full right angle. Where the pipe only has to change direction partway, or step sideways around an obstruction using two elbows, the Donaldson P105547 makes a 45 degree turn in 152 mm (6.00 in) inside-diameter pipe on a 127 mm radius. Being rubber, it flexes with engine movement instead of cracking and opening an unfiltered path into the engine.\u003c\/p\u003e\n\u003cp\u003eIt is EPDM rubber built to ASTM standards and rated -40 to 100°C. It resists tears, punctures and vacuum collapse on the clean side of the intake, absorbs vibration and helps cut intake noise. At this size the rubber is ribbed or compounded for extra strength. Push at least 38 mm (1.5 in) of metal pipe into each end so it seals and stays put. It is for the clean side only, so do not fit it after the turbo. Measure the outside of your pipe before ordering.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 76 OEM and aftermarket brands, including Caterpillar 200043016, Volvo 3119168 and Scania 1342168. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954945196111,"sku":"P105547","price":77.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p105547-45-degree-rubber-elbow.jpg?v=1793486290"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/p109021.700.700.jpg?v=1793652969","url":"https:\/\/geelongfiltersales.com.au\/collections\/45-degree-rubber-elbows.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}