{"title":"A-FLO Equipment","description":"\u003cp\u003eA-FLO Equipment is an Australian fuel and fluid handling brand that makes the gear between bulk storage and the machine: tanks, pumps, meters, reels and dispensing equipment for diesel, oil, grease and AdBlue. It is known for Polycube ute and site tanks, LUBESMART oil storage, grease and oil pump kits, flow meters, waste oil drainers and spill containment, and it runs Bluequip as its dedicated AdBlue line.\u003c\/p\u003e\u003cp\u003eMechanics fitting out a service bay, farmers refuelling from a ute tank and fleet yards running bulk fluids all use it. The fluid, the volume and the power available on site decide the setup. Get one of those wrong, such as a diesel pump on AdBlue, and you pay for it on every fill. The category guide below shows where each part of the range sits.\u003c\/p\u003e","products":[{"product_id":"af-fs-al60","title":"FuelShot FS-AL60 3\/4\" Standard Automatic Shut-Off Diesel Nozzle 60 lpm","description":"\u003cp\u003eA diesel nozzle that keeps flowing after the tank is full turns a routine refuel into a spill, a cleanup and a fuel loss you wear. That is the job the FuelShot FS-AL60 is built for, a 3\/4in automatic shut-off nozzle that cuts the flow at full and suits small to mid-sized transfer setups.\u003c\/p\u003e\n\u003cp\u003eThe nozzle flows up to 60 lpm, which suits small and mid-sized transfer pumps rather than high-volume truck fills. The automatic shut-off is the feature that matters day to day: it senses when the tank reaches capacity and stops the flow, so an operator filling machinery on site is not standing over the nozzle waiting to catch the cut-off by hand. That is what keeps diesel out of the dirt and off the deck.\u003c\/p\u003e\n\u003cp\u003eThe body is aluminium with NBR seals, a combination chosen to resist wear from diesel and biodiesel blends rather than generic seals that harden and weep once fuel gets to them. Over a season of daily fills that is the difference between a nozzle that keeps sealing and one that starts dribbling at the spout.\u003c\/p\u003e\n\u003cp\u003eConnection is a 3\/4in BSP inlet with a 19mm spout. Australian transfer plumbing is typically BSP, so it threads onto common pump outlets without an adapter, and the 19mm spout fits the fill necks on most small and mid plant, light trucks and equipment tanks. An integrated swivel connector lets the nozzle turn in the hand as you position it, which takes the twist out of the hose and the strain off your wrist across a shift of fills.\u003c\/p\u003e\n\u003cp\u003eFluid rated for diesel and biodiesel blends. It is a fuel-transfer nozzle and is not intended for petrol, oils or DEF\/AdBlue. It fits workshops, farms, construction sites and transport fleets running their own diesel from tanks or transfer pumps.\u003c\/p\u003e\n\u003cp\u003eHandling stays simple over a long day of fills. The nozzle is light in the hand, and with the automatic shut-off doing the watching, an operator can hold the machine or the hose with the other hand rather than gripping the trigger through the whole fill. On a farm or a site where one person fuels several machines back to back, that is less standing time and less diesel on the ground across the shift.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you connect it to a transfer pump or hose ending in a 3\/4in BSP fitting. If you fill trucks or larger machinery and 60 lpm is slower than you want, the 1in FS-AL120 in the same range flows up to 120 lpm; size the nozzle to the tanks you fill most.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482124050511,"sku":"AF-FS-AL60","price":143.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fuelshot-af-fs-al60-3-4-standard-automatic-shut-off-diesel-nozzle.webp?v=1794952199"},{"product_id":"af-fs-al120","title":"FuelShot FS-AL120 1\" Hi-Flow Automatic Shut-Off Diesel Nozzle 120 lpm","description":"\u003cp\u003eFilling a truck or a large machine off a slow nozzle is time the operation is not moving. At 120 lpm, the FuelShot FS-AL120 fills large tanks fast and shuts off at full, a 1in high-flow diesel nozzle built for high-capacity transfer.\u003c\/p\u003e\n\u003cp\u003eAt 120 lpm this nozzle is sized for high-capacity transfer pumps and bulk storage, which is what lets you fill large vehicle and machinery tanks in a fraction of the time a 60 lpm nozzle takes. On a yard turning over trucks through the day, that throughput is the difference between fuelling being a quick stop and fuelling being the queue everything else waits behind.\u003c\/p\u003e\n\u003cp\u003eThe automatic shut-off stops the flow the moment the tank is full, so high flow does not turn into a high-speed overfill down the side of the tank. At this rate that matters more, not less: a nozzle moving 2 litres a second needs a shut-off you can trust to catch the fill without hovering over it.\u003c\/p\u003e\n\u003cp\u003eThe body is aluminium with diesel-resistant seals, specified to stand up to the wear and the fuel in transport yards, construction sites and agricultural operations. It is tough enough for hard use and light enough to handle comfortably through repeated fills, which is what you want when the same nozzle is picked up dozens of times a day.\u003c\/p\u003e\n\u003cp\u003eConnection is a 1in BSP inlet with a 25mm spout, matched to high-capacity transfer pumps and storage systems. Australian plumbing is typically BSP, so it connects to common bulk transfer hardware without an adapter, and the larger 25mm spout suits the bigger fill necks on trucks and heavy machinery.\u003c\/p\u003e\n\u003cp\u003eThe trade-off with high flow is that the tank fills fast, so the shut-off and a matched hose do more of the work of keeping the fill clean. Run it on a pump and hose rated for the flow rather than a light setup, and the nozzle delivers its speed without cavitating or spitting at the spout.\u003c\/p\u003e\n\u003cp\u003eFluid rated for diesel. It is a fuel-transfer nozzle and is not intended for petrol, oils or DEF\/AdBlue. To put it to work you need a high-capacity transfer pump or storage system terminating in a 1in BSP fitting and a hose rated to match. If your fills are smaller plant and light vehicles, the 3\/4in FS-AL60 at 60 lpm is the better-matched nozzle, so size the nozzle to the tanks you fill most.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482135781455,"sku":"AF-FS-AL120","price":314.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fuelshot-af-fs-al120-1-hi-flow-automatic-shut-off-diesel-nozzle.webp?v=1794952199"},{"product_id":"af-fp-984330","title":"AF-FP-984330 Digital Metered Oil Control Gun, Flexible Outlet, IP65, Ergonomic, 30 lpm","description":"\u003cp\u003eWhere oil is charged to jobs by volume, the meter is not a convenience, it is the basis for how you bill. That is what the AF-FP-984330 is built to protect, a digital metered oil control gun that delivers accurate, repeatable fills so top-ups stay clean and the paperwork stays honest.\u003c\/p\u003e\n\u003cp\u003eThe gun pairs an aluminium body with an integrated electronic meter, delivering up to 30 lpm at 70 bar (7,000 kPa \/ 1,015 psi) and holding ±0.5% accuracy on the back-lit display. The point of that accuracy is consistency across the whole flow range, not just at a single calibration point, which is what a workshop charging by volume needs across both slow top-ups and fast sump refills. Over a month of fills, that is the difference between stock that reconciles and stock that quietly walks.\u003c\/p\u003e\n\u003cp\u003eA double totaliser tracks a batch total and a lifetime total, and the two do different jobs. The batch figure is what you read off for the fill in front of you. The lifetime figure is what supports stock reconciliation and usage tracking when it is time to account for what has gone out. Setup stays quick with a ready-to-use meter, easy calibration, an electronic reset, and an adjustable UMA camshaft for repeatable control.\u003c\/p\u003e\n\u003cp\u003eThe build is specified for real service bays. IP65 sealing and a rubber over-mould handle dust and drips, the flexible outlet reaches into tight engine bays without spilling down the side of the fill point, and a 360 degree swivel takes the twist out of the hose to cut wrist fatigue over a shift. The grip is shaped for one-handed work, so an operator can steady the machine with one hand and dose with the other. Inside, A-FLO uses aluminium for the meter and nozzle bodies for strength without bulk, NBR, nickel-plated steel and brass in the valve for chemical resistance, and technopolymer gears for metering accuracy and low wear. It runs on 2 x AAA batteries, included, with low consumption, so there is no power supply to route out to the gun.\u003c\/p\u003e\n\u003cp\u003eIt handles oils up to 2000 cSt, which covers everything from light engine oils through to heavier gear oils, making it a fit for passenger, heavy vehicle, agricultural and mining service bays. It is an oil dispensing gun and is not intended for grease or water-based fluids.\u003c\/p\u003e\n\u003cp\u003eThe gun connects to an oil hose reel or hose to complete a dispensing point, so it pairs naturally with a fixed oil reel on the supply side. Batteries are included and it calibrates in minutes, so it is ready to fit and verify on the day it arrives.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482206134351,"sku":"AF-FP-984330","price":527.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fp-984330-digital-metered-oil-control-gun.webp?v=1785301264"},{"product_id":"af-a-102111b","title":"AF-A-102111B Digital Metered Oil Gun, Flexible Outlet, 30 lpm","description":"\u003cp\u003eOne gun that meters a careful 1 lpm trickle and a 30 lpm sump fill at the same accuracy is rare. The AF-A-102111B holds ±0.5% right across its range, so the slow doses and the fast fills read equally true and the fill matches the invoice.\u003c\/p\u003e\n\u003cp\u003eThe gun dispenses at a variable rate up to 30 lpm, so the same tool handles a careful top-up and a steady driveline fill without swapping equipment. It holds ±0.5% accuracy across that range, and the point of accuracy across the range rather than at one calibration point is that both the slow doses and the fast fills read true, which is what a workshop billing by the litre needs.\u003c\/p\u003e\n\u003cp\u003eThe display runs a resettable totaliser and a lifetime totaliser, and the two do separate jobs. The resettable figure is the batch in front of you. The lifetime figure is what backs stock reconciliation when it is time to square what has left the drum against what was billed. It is powered by a single 3 V CR123A or an AAA setup, so there is no supply to route to the gun and no downtime waiting on power.\u003c\/p\u003e\n\u003cp\u003eManufactured in Germany, the gun is built to hold accuracy in field conditions rather than only on the bench. IP65 sealing keeps dust and splash out of the meter, it operates from -10 to +50°C for cold sheds and hot yards, and it handles fluids from 8 to 5000 mPas, which covers light engine oils through to heavier lubricants and antifreeze. A flexible outlet and a 1\/2in BSP (female) swivel connector line the nozzle up to the fill point and take the twist out of the hose, cutting spillage and wrist fatigue over a shift.\u003c\/p\u003e\n\u003cp\u003eIt is an oil and fluid dispensing gun rated to 70 bar (7,000 kPa \/ 1,015 psi) working pressure, suited to workshops, vehicle service fleets, agricultural facilities and mining operations. It is not intended for grease or water-based fluids.\u003c\/p\u003e\n\u003cp\u003eIt is the higher-flow, wider-viscosity option in the metered-gun range, so where a lighter gun struggles on cold or heavy oil, this one holds its rate. If your dispensing is light engine oil only and volume tracking is all you need, a simpler metered gun covers it, but for mixed oils across a busy service floor the range and the sealing earn their place.\u003c\/p\u003e\n\u003cp\u003eThe gun connects to an oil hose reel or hose on the supply side through its 1\/2in BSP swivel, so it completes a metered dispensing point on a reel-fed line. Batteries are included, so it is ready to fit and verify on arrival.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482217013327,"sku":"AF-A-102111B","price":658.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/a-flo-af-a-102111b-digital-metered-oil-gun.webp?v=1793486589"},{"product_id":"af-ae-kp7247pz","title":"AF-AE-KP7247PZ 58:1 Ratio 20kg Grease Pump Kit with Regulator","description":"\u003cp\u003eBulk grease from a 20 kg pail cannot be moved by hand at any rate that keeps a service schedule on track. A pneumatic 58:1 grease pump kit changes that, the AF-AE-KP7247PZ taking the pumping off the technicians and keeping routine lubrication fast and consistent.\u003c\/p\u003e\n\u003cp\u003eThe pump runs a 58:1 ratio, which means the air pressure at the inlet is multiplied fifty-eight times at the grease outlet. That is what lets it push stiff grease through the hose and into tight pins, bushes and bearings without stalling, and it is why a 58:1 pump handles high-viscosity grease and cold mornings better than a lower-ratio unit. Output runs up to 1500 g\/min, so a technician working across multiple points and multiple machines is not standing around waiting on delivery between fittings. On off-highway gear where a greasing round is measured against machine availability, that throughput is the difference between finishing the round and carrying it over to the next shift.\u003c\/p\u003e\n\u003cp\u003eThe regulator is the practical difference between this kit and a bare pump. It gives you control over the air supply and, in turn, how predictably grease is dispensed, which keeps mess down as you move between high-load lubrication points. The follower plate does the quieter work: it sits on the grease surface and stops air pockets forming as the pail empties, which is the usual cause of a pump losing prime partway through a drum and the reason a round grinds to a halt mid-machine.\u003c\/p\u003e\n\u003cp\u003eReach and handling are built in rather than bolted on. The grease gun runs a Z swivel that keeps the hose from kinking as the operator works around an axle or a boom, which is where most of the fatigue and dropped fittings come from, and the hose is long enough to get to awkward service points without repositioning the drum every few minutes.\u003c\/p\u003e\n\u003cp\u003eThis is a setup for farms, fleet workshops, earthmoving yards, industrial sites and mining maintenance, wherever grease is used daily across a range of equipment and hand pumping is no longer realistic. It is rated for greases and is not a transfer pump for oils or water-based fluids.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you supply a compressed air line and the 20 kg pail of grease, which is not included. The kit carries a 2 year warranty. If you run grease from 180 kg drums rather than 20 kg pails, the 180 kg version in this range is the pump to specify instead, so match the pump to your drum size before ordering.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482450714703,"sku":"AF-AE-KP7247PZ","price":1567.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ae-kp7247pz-58-1-ratio-20kg-grease-pump-kit.webp?v=1785301346"},{"product_id":"af-ae-kp7294scz","title":"AF-AE-KP7294SCZ 58:1 Ratio 180kg Grease Pump Kit with Regulator","description":"\u003cp\u003eServicing plant, trucks and implements often enough that a hand gun feels like a second job is the point at which drum size starts deciding your day. Set up for 180 kg drums, the AF-AE-KP7294SCZ is a pneumatic 58:1 grease pump kit that cuts the changeovers and keeps the greasing moving.\u003c\/p\u003e\n\u003cp\u003eThe pump runs a 58:1 ratio, multiplying inlet air pressure fifty-eight times at the outlet, which is what pushes heavier grease into pins, bushes, U-joints, bearings and linkages that low-pressure guns cannot feed. Output runs up to 1500 g\/min, so a technician working a full machine or a run of them is not waiting on delivery between fittings.\u003c\/p\u003e\n\u003cp\u003eThe reason to run this over the 20 kg version is the drum. Working from a 180 kg drum means far fewer changeovers across a busy week, which matters most for fleet sheds and service crews where stopping to swap a pail is stopping the whole round. Fewer changeovers also mean fewer chances to introduce dirt at the drum, which is where a lot of grease contamination starts.\u003c\/p\u003e\n\u003cp\u003eWhat the regulator adds over a bare pump is control you can set and leave: dial in the delivery once and every tech gets the same feel at the gun instead of wrestling the air supply. The follower plate handles priming, riding the grease surface so air pockets cannot form as the drum drops, which is what stalls an unplated pump halfway down.\u003c\/p\u003e\n\u003cp\u003eThis suits busy workshops, farms, fleet sheds and mobile service crews greasing a range of gear daily. It is rated for greases and is not a transfer pump for oils or water-based fluids.\u003c\/p\u003e\n\u003cp\u003eAir supply is the one thing to confirm before a high-duty round. Being pneumatic, the pump needs a compressed air line that can sustain flow while it works, so check your compressor keeps up before relying on it for continuous, multi-machine greasing rather than the odd fitting.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you supply a compressed air line and the 180 kg grease drum, which is not included, and the kit carries a 2 year warranty. If your greasing is lower-volume or you move the drum between sites, the 20 kg version of this kit is the easier one to shift and store, size the drum to how and where you grease.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482464968783,"sku":"AF-AE-KP7294SCZ","price":1969.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ae-kp7294scz-58-1-ratio-180kg-grease-pump-kit.webp?v=1785301348"},{"product_id":"af-ap-3132pk","title":"Kläger Plastik Hobby 1L Solvent Resistant Industrial Pressure Sprayer","description":"\u003cp\u003eMost pump sprayers give up the first time a solvent-based fluid gets into them: the seals swell and the trigger stops sealing. The Kläger Plastik Hobby 1L holds up to exactly those fluids, a solvent-resistant industrial sprayer for the chemicals that finish a standard bottle early.\u003c\/p\u003e\n\u003cp\u003eWhat lets it handle those fluids is the material spec. The wetted parts are PA, FKM and V2A, a combination compatible with most solvent-based liquids including hydrocarbons, mineral oils and petroleum products and their derivatives. In practice that is the difference between a sprayer you can use for degreasers, release agents and maintenance chemicals and one that hardens and leaks after a few fills.\u003c\/p\u003e\n\u003cp\u003eIt carries a 0.9 L working fill and runs to a maximum 3 bar (300 kPa \/ 44 psi). At 3 bar (300 kPa \/ 44 psi) it delivers around 300 ml\/min, a steady, repeatable output for the kind of repetitive application work where consistency matters more than raw volume. A 60 degree fine spray angle gives broad even coverage, and a focused jet reaches up to 4 m, so you can hit an awkward guard or housing without soaking the whole bench to get there.\u003c\/p\u003e\n\u003cp\u003eThe detail work is what makes it usable day to day. An integrated scale marked in litres, pints and gallons and a set of mixing-ratio markings let you dilute and repeat a mix accurately, which matters when several techs share the same chemicals and the ratio has to come out the same each time. AntiGlide haptic elements and a recessed grip keep control with gloves on, and transparent visibility stripes let you read the fill level at a glance on a coloured bottle.\u003c\/p\u003e\n\u003cp\u003eIt is approved for operating temperatures from -5 to +30°C, covering typical shed and site conditions, and suits construction, automotive workshops, maintenance, cleaning and hygiene, food-related work where appropriate, and house and garden jobs that need a more chemical-tolerant sprayer. Confirm your fluid against the PA, FKM and V2A compatibility before filling, as this is a solvent-resistant sprayer rather than a universal one.\u003c\/p\u003e\n\u003cp\u003eBeyond the reach of the focused jet, the everyday value is control. A fine, even 60 degree pattern lays product down without the overspray that wastes chemical and coats everything nearby, which on a shared bench or near other equipment is what keeps a quick spray job from turning into a wider clean-up.\u003c\/p\u003e\n\u003cp\u003eIf you need more capacity between refills, the Kläger Profi 1.5 L is the larger sprayer in the same range with the same solvent-resistant build, step up to it if you empty this one too often between refills.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482525327439,"sku":"AF-AP-3132PK","price":75.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-3132pk-hobby-1l-solvent-resistant-pressure-sprayer.webp?v=1785301358"},{"product_id":"af-ap-3135pk","title":"Kläger Plastik Profi 1.5L Solvent Resistant Industrial Pressure Sprayer","description":"\u003cp\u003eSharing solvent chemicals across a workshop only works if every tech can mix them the same way and the sprayer survives the fluids. Half a litre bigger than the Hobby, the Kläger Plastik Profi 1.5L is a solvent-resistant sprayer for shared, repeatable workshop use.\u003c\/p\u003e\n\u003cp\u003eThe wetted parts are PA, FKM and V2A, compatible with most solvent-based liquids including hydrocarbons, mineral oils and petroleum products and their derivatives. That material spec is why it holds up to cleaners, degreasers, release agents and process fluids that swell and split the seals in standard sprayers within a few fills.\u003c\/p\u003e\n\u003cp\u003eIt holds a 1.5 L fill, half a litre more than the Hobby, so there are fewer trips back to the drum on bigger jobs. Maximum pressure is 3 bar (300 kPa \/ 44 psi), delivering a consistent pattern without a battery or a motor to fail. Set a fine 60 degree angle for broad even coverage or switch to a focused jet reaching up to 4 m for machinery guards, trays, benches, wheels, panels and housings, and an optional 360 degree spray function lets you apply at awkward angles and inverted points that a fixed sprayer cannot reach.\u003c\/p\u003e\n\u003cp\u003eAn integrated fill scale in litres, pints and gallons and a mixing-ratio guide keep dilution accurate and repeatable across a shared bottle, and AntiGlide haptic elements with a recessed grip give control with gloves on and less hand fatigue over a long spraying run. Visibility stripes make fluid-level checks quick, particularly with coloured liquids.\u003c\/p\u003e\n\u003cp\u003eIt is approved from -5 to +30°C and suits construction, automotive workshops, maintenance, cleaning and hygiene, food environments and home and garden use. Confirm your fluid against the PA, FKM and V2A compatibility before filling, as this is built for solvent tolerance rather than as a universal sprayer.\u003c\/p\u003e\n\u003cp\u003eThe optional 360 degree function is worth calling out for overhead and inverted work. Applying a release agent to the underside of a guard or into an upturned housing is where a standard sprayer starves and stops, and the 360 draw keeps it feeding whichever way the bottle is turned.\u003c\/p\u003e\n\u003cp\u003eIf a 1.5 L fill is more than you need for quick jobs, the Kläger Hobby 1 L is the compact option in the same range with the same solvent-resistant internals, drop to it if a 1.5 L fill is more than your quick jobs need.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482534961231,"sku":"AF-AP-3135PK","price":85.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-3135pk-1-5l-solvent-resistant-pressure-sprayer.webp?v=1785301363"},{"product_id":"af-ae-kp7247pz-d","title":"AF-AE-KP7247PZ-D 58:1 Ratio 20kg Grease Pump Kit with Regulator, inc. Drum Dolly","description":"\u003cp\u003eA grease kit that lives in one corner of the workshop is only half the tool when the machine you are servicing is at the other end of the yard. The A-FLO AF-AE-KP7247PZ-D pairs the pneumatic 58:1 20 kg grease kit with a drum dolly, so the grease goes to the gear.\u003c\/p\u003e\n\u003cp\u003eThe pump runs a 58:1 ratio, multiplying inlet air pressure fifty-eight times at the outlet to push stiff grease into pins, bushes and bearings without stalling, and it delivers up to 1500 g\/min so a tech is not waiting on delivery between fittings. That is the same greasing performance as the standard kit, matched to 20 kg drums and pails.\u003c\/p\u003e\n\u003cp\u003eThe difference in this version is the drum dolly. It is a steel-built trolley on load-rated castors sized for 20 L and 20 kg drums, so the whole grease setup rolls to the machine rather than the machine coming to it or the hose being stretched across the floor. Beyond convenience that is a manual-handling gain: moving a 20 kg drum on castors takes the lift and the awkward carry out of the job, which is what keeps a busy round from becoming a back strain.\u003c\/p\u003e\n\u003cp\u003eThe regulator lets you dial in consistent delivery and hold it between techs and jobs, and the follower plate sits on the grease surface to stop air pockets forming as the pail empties, which is the usual cause of a pump losing prime partway down a drum.\u003c\/p\u003e\n\u003cp\u003eThis suits farms, fleet workshops, earthmoving yards, industrial sites and mining maintenance where greasing is daily and the gear is spread out. It is rated for greases and is not a transfer pump for oils or water-based fluids.\u003c\/p\u003e\n\u003cp\u003eAir supply is the check before a high-duty round. Being pneumatic, the pump needs a compressed air line that sustains flow under load, so confirm your compressor keeps up before relying on it for continuous, multi-machine greasing.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you supply a compressed air line and the 20 kg grease drum, which is not included, and the kit carries a 2 year warranty. If you grease from one fixed point and do not need to move the drum, the standard 20 kg kit without the dolly covers it, and if you run 180 kg drums the 180 kg kit is the one to specify, so match the setup to how far the grease has to travel.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482786127951,"sku":"AF-AE-KP7247PZ-D","price":1754.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/a-flo-af-ae-kp7247pz-d-58-1-ratio-20kg-grease-pump-kit.webp?v=1793486631"},{"product_id":"af-ap-1337b","title":"AF-AP-1337B 20L Gear Oil Hand Pump with Adaptor Set","description":"\u003cp\u003eTopping up a diff or gearbox with thick oil and a bargain pump is slow, drippy work, and the hose kinks the moment you bend it. A 20 L gear oil hand pump with an adaptor set solves that, the AF-AP-1337B moving heavier oils under control and with less waste.\u003c\/p\u003e\n\u003cp\u003eIt is a single-handled hand pump that needs no power or air, sized to sit on a 20 L drum and move engine, gear, diff and hydraulic oils. The reason it suits thicker oils where a lighter pump struggles is the anti-kink hose: the supplied 1.2 m line holds its bore instead of collapsing, so flow stays consistent rather than surging and stopping as the hose pinches.\u003c\/p\u003e\n\u003cp\u003eThe pump head is polyethylene with a built-in nozzle holder and an overflow drain-back, so oil left in the spout runs back rather than onto the floor when you finish. A steel suction tube gives the pump its durability where the wear happens, and a 4in (102 mm) telescopic extension adjusts reach and pickup for different drum heights and tight bays, so you are not fighting the tube to reach the bottom of a container.\u003c\/p\u003e\n\u003cp\u003eConnection is straightforward. The pump fits a plastic pull-out Rieke spout or 2in external threads, and the included adaptor set suits common drum and container openings, so you can move it between containers without fabricating a fitting each time.\u003c\/p\u003e\n\u003cp\u003eIt is suited to engine, gear, diff and hydraulic oils, the fluids most farms, workshops and mobile service setups move week to week. It is a manual oil-transfer pump and is not intended for fuels or water-based fluids.\u003c\/p\u003e\n\u003cp\u003eFor farms and mobile setups the value is one pump that moves whatever heavy oil the job needs, from a diff to a hydraulic reservoir, without a powered rig. Kept clean and dedicated to oils, it stays a reliable transfer tool through years of routine servicing rather than a bench ornament that seizes after a season.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you fit it to a 20 L drum using the spout, thread or adaptor that matches your container, and stand the pump so the suction tube reaches the base. For heavier oils in cold conditions, keep the run as direct as practical from drum to fill point so the anti-kink hose can do its job.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482818928719,"sku":"AF-AP-1337B","price":77.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1337b-20l-gear-oil-hand-pump-with-adaptor.webp?v=1785301356"},{"product_id":"af-ap-1336b","title":"AF-AP-1336B 20L Oil Pump with Hose (Retail Box)","description":"\u003cp\u003eOil changes in a shed or a service truck are rarely hard, just slow and messy. The AF-AP-1336B takes the mess out of it, a hand-operated 20 L oil pump with a hose that makes transfer controlled and repeatable without power or air.\u003c\/p\u003e\n\u003cp\u003eThe pump is designed around a smooth, predictable stroke, so you are not fighting the handle to top up a diff, fill a gearbox or service a hydraulic reservoir. It is quick for a manual pump too, moving roughly 1 litre every 14 strokes, which keeps the job short enough that you are back at the machine rather than stood over a drum.\u003c\/p\u003e\n\u003cp\u003eWhere it earns its place is spill control. The supplied 1.5 m anti-kink hose reaches awkward fill points without collapsing and choking the flow, and an anti-drip nozzle cuts the after-flow that usually ends up on the floor or your boots when you lift away. A drain-back nozzle holder gives the nozzle a home when you finish, so the spout drips back into the system and the bay stays cleaner.\u003c\/p\u003e\n\u003cp\u003eA telescopic extension adjusts to real drum and container heights, improving pickup so you can draw a container down without tipping it to chase the last of the oil. A steel suction tube handles the wear that comes with regular use.\u003c\/p\u003e\n\u003cp\u003eIt is suited to engine, gear, diff and hydraulic oils, the common fluids moved every week on farms and in workshops. It is a manual oil-transfer pump and is not intended for fuels or water-based fluids.\u003c\/p\u003e\n\u003cp\u003eThe stroke count is worth knowing for planning a job. At roughly 1 litre every 14 strokes, a few litres into a gearbox is a short, predictable effort rather than an open-ended one, which is what makes it practical to keep on the service truck for top-ups between bigger jobs. It is a hand pump, with nothing to plug in and nothing to charge, which is what suits it to field work and sheds without power on tap.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you stand it in a 20 L drum with the suction tube reaching the base and route the hose to your fill point. If you want an adaptor set for moving between different container openings, the AF-AP-1337B in the same range ships with one for anyone who swaps between different container openings often.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482826465359,"sku":"AF-AP-1336B","price":66.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1336b-20l-oil-pump-with-hose-retail-box.webp?v=1785301356"},{"product_id":"af-ap-1161","title":"AF-AP-1161 450g Air Operated Grease Gun, Rigid Outlet, 4-Jaw Grease Coupler","description":"\u003cp\u003eGreasing pins, bushes, bearings and universal joints across a full machine on a hand gun is slow, tiring work, and the stubborn fittings still win. The AF-AP-1161 takes that load off you, a 450 g air-operated grease gun delivering continuous flow to 262 bar (26,200 kPa \/ 3,800 psi) so the joint takes the grease, not your arm.\u003c\/p\u003e\n\u003cp\u003eRunning on shop air, the gun delivers continuous grease flow instead of the stroke-by-stroke output of a hand gun, which is what keeps lubrication moving through a long service run without the fatigue. The 262 bar (26,200 kPa \/ 3,800 psi) capability is the part that clears stubborn, dirt-packed fittings that low-pressure guns stall on, so intervals stay on track on high-load, high-dirt gear like earthmoving equipment, implements, trailers and trucks.\u003c\/p\u003e\n\u003cp\u003eA 360 degree swivelling body is the usability feature that saves the most time. It lets the gun turn to the fitting rather than making you turn your wrist and the hose, which matters when zerks are tucked behind guards, near chassis rails or under implements. Less repositioning means more fittings done and less strain over a full grease round.\u003c\/p\u003e\n\u003cp\u003eIt comes with a rigid outlet and a 4-jaw coupler, which bites and holds on the grease nipple for a secure connection that resists slipping off under pressure. That is what keeps the grease going into the joint rather than out around the coupler and onto the floor.\u003c\/p\u003e\n\u003cp\u003eThis is a grease gun for fleets, farms and busy workshops keeping serious maintenance schedules. It dispenses grease and is not intended for oils or fluids.\u003c\/p\u003e\n\u003cp\u003eAir consumption is worth a thought before it goes on a small compressor. A continuous-flow air gun draws air while the trigger is held, so a compressor that keeps up is what lets you grease a full round without pausing for pressure to recover. On a workshop with a decent air supply that is a non-issue, and the continuous flow is exactly what makes long rounds quicker.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you connect it to a compressed air supply, and it is ready to run with the rigid outlet and 4-jaw coupler fitted. If you need to reach fittings that a rigid outlet cannot line up on, a grease gun with a flexible outlet is the better tool for those points, so match the outlet to where your fittings sit.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482835312719,"sku":"AF-AP-1161","price":218.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1161-450g-air-operated-grease-gun.webp?v=1785301353"},{"product_id":"af-uf-p450","title":"AF-UF-P450 450g Heavy Duty Variable Pistol Grip Grease Gun, 300mm Flexible Outlet, 4-Jaw Coupler","description":"\u003cp\u003eA grease point that is tight one minute and free-flowing the next needs a gun that changes with it. A variable-stroke pistol grip gun keeps up with it, the AF-UF-P450 switching between high pressure and high volume and reaching through a 300 mm flexible outlet at 450 g.\u003c\/p\u003e\n\u003cp\u003eThe variable stroke is the feature that sets it apart. It lets you pump for higher pressure when a fitting is tight or a line resists, then switch to higher volume to move quickly through routine points, so you are not stuck with one output fighting every zerk the same way. The gun develops up to 552 bar (55,200 kPa \/ 8,000 psi), which is enough to clear stubborn, high-resistance points that stall a lighter gun.\u003c\/p\u003e\n\u003cp\u003eThe head is aluminium die-cast, built to take the drops, knocks and daily service runs of workshop life without going sloppy or leaking at the head. It is a one-hand pistol grip, which gives better control in awkward positions and cuts fatigue when you are working through a full machine service on your own.\u003c\/p\u003e\n\u003cp\u003eFor access and sealing it ships with a 300 mm flexible outlet and a professional 4-jaw coupler. The flexible hose reaches fittings tucked behind guards or in tight chassis pockets that a rigid outlet cannot line up on, and the 4-jaw coupler bites and seals on the nipple to reduce slip-offs, mess and wasted grease.\u003c\/p\u003e\n\u003cp\u003eThis is a heavy-use grease gun for farm, fleet, earthmoving and industrial maintenance, sized for loaders, excavators, tractors, trucks, implements and the pins, bushes, bearings and U-joints on them. It dispenses grease and is not intended for oils or fluids.\u003c\/p\u003e\n\u003cp\u003eBecause it works by hand rather than off air, it goes anywhere the machine is, from a paddock to the top of a dozer, with no hose or compressor to drag along. That portability, paired with the variable stroke, is what makes it a sensible single grease gun for an operator who services their own gear across scattered sites.\u003c\/p\u003e\n\u003cp\u003eIt is hand-operated, so no air or power is needed, and it is ready to use with the flexible outlet and coupler fitted. If your work is high-volume routine greasing where you want continuous flow rather than a hand stroke, the air-operated AF-AP-1161 is the alternative for greasing high volumes off shop air rather than by hand.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482841210959,"sku":"AF-UF-P450","price":121.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-uf-p450-450g-heavy-duty-variable-pistol-grip.webp?v=1785301375"},{"product_id":"af-uf-l450","title":"AF-UF-L450 450g Heavy Duty Lever Action Grease Gun, Rigid Outlet, 4-Jaw Coupler","description":"\u003cp\u003eCold, neglected or high-resistance grease points are where a weak gun flexes, leaks and wastes your time. Rated to 690 bar (69,000 kPa \/ 10,000 psi), the AF-UF-L450 is a 450 g lever-action grease gun built to push through the points that stall lighter guns.\u003c\/p\u003e\n\u003cp\u003eThe lever action trades the speed of a pistol grip for leverage, giving strong, controlled output and the pressure to clear tight fittings. At up to 690 bar (69,000 kPa \/ 10,000 psi) this is the highest-pressure gun of the three hand guns in this range, which is what you reach for when a point is packed, cold or simply has not been touched in too long.\u003c\/p\u003e\n\u003cp\u003eAn air bleeder valve is the practical inclusion that saves the most frustration. It lets you purge trapped air to prime the gun quickly, which is where a lot of time goes when you swap a cartridge in the field or work in cooler conditions and the gun air-locks. The head and filler are aluminium die-cast, built for day-in, day-out use in gritty conditions without going sloppy.\u003c\/p\u003e\n\u003cp\u003eIt comes with a rigid outlet and a professional 4-jaw coupler that bites and holds on the nipple for a secure connection, keeping grease going into the joint rather than out around the coupler. That secure seal is what keeps servicing clean and cuts blow-offs under high pressure.\u003c\/p\u003e\n\u003cp\u003eThis suits operators maintaining assets properly across ag and construction equipment, trucks, trailers, 4WDs and plant, greasing pins, bushes, U-joints, linkages, bearings and general chassis points. It dispenses grease and is not intended for oils or fluids.\u003c\/p\u003e\n\u003cp\u003eBecause it is lever-operated and needs no air, it goes wherever the fitting is, and the leverage is what lets one person put real pressure into a neglected point without a powered gun. The trade-off against a pistol grip is speed on easy points, so if most of your greasing is routine and free-flowing, a variable-stroke pistol gun covers those faster.\u003c\/p\u003e\n\u003cp\u003eIt is hand-operated, so no air or power is needed, and it is ready to run with the rigid outlet and coupler fitted. If you need to reach fittings a rigid outlet cannot line up on, the AF-UF-P450 pairs a flexible outlet with a variable stroke, so pick the gun by whether your points need maximum pressure or better access.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482844946511,"sku":"AF-UF-L450","price":173.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-uf-l450-450g-heavy-duty-lever-action-grease-gun.webp?v=1785301374"},{"product_id":"af-ap-8100","title":"AF-AP-8100 1L Multi-Purpose Bottle Pump","description":"\u003cp\u003eTopping up a gearbox, diff housing or small reservoir from a pour bottle usually means spilled oil and a slippery floor. The AF-AP-8100 fixes that, a 1 L multi-purpose bottle pump that lays oil down in a controlled line where access is tight and accuracy matters.\u003c\/p\u003e\n\u003cp\u003eThe pump holds 1 L and feeds through a 500 mm PVC hose and spout, so you guide oil precisely into an awkward filler neck instead of pouring, splashing and guessing. For workshops and mobile service rigs that is measured in minutes saved and mess avoided, particularly on the service points a jug simply cannot reach cleanly.\u003c\/p\u003e\n\u003cp\u003eIts real advantage is that it is self-contained. Between uses the system stays sealed, which helps keep dirt out of the oil, and that matters most on driveline oils, hydraulic oils and machine lubricants where particle ingress shortens component life. A sealed top-up means more confidence that the oil going in is clean, and less rework chasing contamination you introduced at the fill.\u003c\/p\u003e\n\u003cp\u003eIt suits farmers, workshop supervisors, mechanics, fleet owners and operators doing repeatable top-ups across mixed equipment, and it is at home in agricultural, earthmoving, industrial, mining, transport and workshop or service-garage settings. Compact to store and easy to handle, it also cuts spill risk and clean-up time around vehicles and machinery.\u003c\/p\u003e\n\u003cp\u003eIt is a manual oil top-up pump for small volumes and is backed by a 2 year warranty. It is best kept filled with a single oil type to preserve the contamination control the sealed design gives you.\u003c\/p\u003e\n\u003cp\u003eBecause it is a self-contained unit rather than a pump that draws from an open container, it doubles as clean storage for the small volume it holds. Park it on the shelf full, and the next top-up is ready without decanting from a larger drum and risking dirt on the way in.\u003c\/p\u003e\u003cp\u003eIt is a manual tool with nothing to power or charge, so it stays ready in a service truck or a workshop drawer, and it is inexpensive enough to keep more than one, each dedicated to a different oil so the fluids never cross.\u003c\/p\u003e\n\u003cp\u003eFor moving larger volumes out of a 20 L drum rather than topping up small reservoirs, a 20 L hand pump such as the AF-AP-1336B is the better-matched tool for that volume.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482848780367,"sku":"AF-AP-8100","price":30.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-8100-1l-multi-purpose-bottle-pump.webp?v=1785301367"},{"product_id":"af-uf-ff25-1","title":"AF-UF-FF25-1 Fuel Filter Assembly, 1\" BSP Ports, 10um Filter Element, Translucent Bowl \u0026 Drain, up to 95 lpm","description":"\u003cp\u003eOn bulk diesel, the contamination you cannot see is what sends injectors and pumps back for repair. The AF-UF-FF25-1 catches it first, a 1in fuel filter assembly with a 10 micron element that cleans diesel before it reaches the nozzle or the machine.\u003c\/p\u003e\n\u003cp\u003eIt is built for real transfer setups and suits gravity feed, hand pumps, air-operated or electric pump systems, which makes it a fit for farm fuel tanks, bulk transfer systems and workshop dispensing points. The 10 micron element traps the particulate that does the damage, and the assembly flows up to 95 lpm so it filters without choking a mid to high-flow transfer line.\u003c\/p\u003e\n\u003cp\u003eThe head is aluminium with 1in BSP inlet and outlet. Australian transfer plumbing is typically BSP, so it plumbs into common transfer hardware without an adapter and with minimal restriction through the head. A translucent polypropylene bowl lets you see what the filter is catching, so you spot sediment and water early rather than after it reaches the pump, and the bowl is replaceable and drains through a simple turn-and-release cock, so servicing is a bowl and element change rather than a whole-unit swap.\u003c\/p\u003e\n\u003cp\u003eIt is rated to a maximum working pressure of 10 bar (1,000 kPa \/ 145 psi), which covers demanding transfer conditions rather than only gentle gravity feed. An optional water-block element and seal kit is available for operators who want an added layer of water management on top of particulate filtration.\u003c\/p\u003e\n\u003cp\u003eIt is a diesel fuel filter assembly and carries a 2 year warranty. It filters fuel in a transfer line and is not a substitute for an engine's own fuel filter.\u003c\/p\u003e\n\u003cp\u003eServicing is deliberately simple and cheap. Because the bowl and element are replaceable, a filter change is a few minutes and the cost of an element, not a new assembly, which is what keeps operators actually changing them on schedule rather than running them past their useful life. The translucent bowl makes that call obvious, since you can see when it is time.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you plumb it into the transfer line between the tank and the dispensing point using its 1in BSP ports, with the flow direction matched to the head. Fit it upstream of the nozzle so fuel is filtered at the point of dispense, and keep the replacement element and seal kit on hand so a service does not stop the line for long.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482854121551,"sku":"AF-UF-FF25-1","price":131.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/a-flo-af-uf-ff25-1-fuel-filter-assembly.webp?v=1793486631"},{"product_id":"af-ap-1321","title":"AF-AP-1321 Heavy Duty 205L Rotary Barrel Drum Pump, Solid Aluminium","description":"\u003cp\u003eDispensing oil or fuel out of a 205 L drum with a slow, sloppy pump wastes product and time, and on many sites there is no power to run anything better. The AF-AP-1321 is the simple answer, a manual rotary barrel pump in solid aluminium that moves fluid from a standard drum without power or air.\u003c\/p\u003e\n\u003cp\u003eThe rotary action gives controlled, consistent flow instead of the surging you get from a bargain pump, and at roughly 3 revolutions per litre you can move fluid at a practical pace while keeping it tidy and predictable. Solid aluminium construction is what lets it take daily handling in sheds, workshops, service trucks and on farms rather than being treated as a throwaway.\u003c\/p\u003e\n\u003cp\u003eIt handles a useful spread of common workshop fluids including diesel, petrol and motor oils, which makes it a single dependable drum pump for a mixed fleet rather than a different pump for each fluid. Because it moves petrol as well as diesel and oil, keep it dedicated and labelled to the fluid you run to avoid cross-contamination between fuels and oils.\u003c\/p\u003e\n\u003cp\u003eIt fits a standard 205 L drum through a 2in bung adapter and reaches the base with a 3-piece steel suction pipe that breaks down for storage and transport. The three-piece pipe is the practical detail that lets one pump suit different drum depths and still pack away, rather than being a fixed length that only suits one drum.\u003c\/p\u003e\n\u003cp\u003eTo seal the joins and stop weeping at the threads, the assembly is best fitted with Teflon tape on the joins, a small step that keeps the floor clean and the flow consistent. It is a manual transfer pump for drums and is not a metered dispenser, so pair it with a meter or nozzle if you need to measure what you draw.\u003c\/p\u003e\n\u003cp\u003eFor sites without power or air, a hand rotary pump is often the only practical way to get fluid out of a drum, and the rotary action is what makes that manual effort steady rather than the stop-start of a lever pump. Turned at a comfortable pace it delivers a usable flow without wearing you out, which is what a no-power drum pump has to do to earn a place in the shed.\u003c\/p\u003e\n\u003cp\u003eIt suits operators who want one no-power drum pump for diesel, petrol and oils across mixed equipment. For a faster or metered setup on a fixed drum, an air or electric pump with a metered gun is the step up where you need measured, higher-volume dispensing instead of portability.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482860576847,"sku":"AF-AP-1321","price":127.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1321-heavy-duty-205l-rotary-barrel-drum-pump.webp?v=1785301355"},{"product_id":"af-ap-2220","title":"AF-AP-2220 205L Rotary Barrel Drum Pump, Cast Iron","description":"\u003cp\u003eDecanting oil or diesel from a 205 L drum with a slow pour loses product and time and leaves a wet floor behind it. A manual rotary barrel pump in solid cast iron takes that out of the job, the AF-AP-2220 moving fluid from a standard drum with no power, battery or air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note: rated for most motor oils and diesel only. Not suitable for petrol, leaded or unleaded, or for gear oil.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rotary action gives a controlled, repeatable output rather than the surge of a cheap pump, and at roughly 1 litre every 3 handle rotations you can meter a top-up without overfilling. Cast iron is the heavier, more wear-tolerant option in the rotary range, built to take daily handling in a workshop, farm shed or service rig.\u003c\/p\u003e\n\u003cp\u003eFluid compatibility is worth reading closely before you buy. It handles most motor oils and diesel, but it is not recommended for petrol or gear oil because of its construction and intended use. If your drum holds petrol or heavy gear oil, a differently specified pump is the right call, and the aluminium AF-AP-1321 covers diesel, petrol and motor oils where you need that wider range.\u003c\/p\u003e\n\u003cp\u003eIt fits a standard 205 L drum through a 2in bung adaptor and reaches the base with a 3-piece steel suction pipe that breaks down for storage and transport. The three-piece pipe suits different drum depths and packs away, rather than being a fixed length locked to one drum.\u003c\/p\u003e\n\u003cp\u003eTo seal the threads and stop the slow weep that turns into a slick floor, fit Teflon tape on the joins. It is a manual transfer pump and is not a metered dispenser, so add a nozzle or meter where you need to measure what you draw.\u003c\/p\u003e\n\u003cp\u003eFor a farm or a remote site with no compressor and no power at the drum, a hand rotary pump is often the only practical way to empty a 205 L drum without tipping it, and cast iron is the body you are not replacing next season. Turned at a steady pace it delivers a usable, predictable flow while staying easy on the arm.\u003c\/p\u003e\n\u003cp\u003eThis suits operators who mostly move engine oil and diesel from drums and want a durable, low-cost pump with nothing to power. For faster bulk transfer of fuels including petrol, the hi-flow AF-AP-1320 steps up to 100 lpm on a wider fluid list.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482871390287,"sku":"AF-AP-2220","price":108.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-2220-205l-rotary-barrel-drum-pump.webp?v=1785301357"},{"product_id":"alfo-af-ap-1320-manual-drum-pump","title":"AF-AP-1320 Premium 60L \u0026 205L Hi-Flow Rotary Drum Pump, 100 lpm","description":"\u003cp\u003eA hand drum pump that tops out at a trickle is fine for the odd litre and useless when you are filling several machines off one drum. At up to 100 lpm, the AF-AP-1320 is the hi-flow rotary pump for drum-to-tank transfers that need to move quickly without power or site electrics.\u003c\/p\u003e\n\u003cp\u003eA premium rotary mechanism paired with a solid aluminium body delivers that flow while keeping the pump light enough to handle on a farm or a workshop bench. Where a standard rotary pump meters a slow litre, this one clears bulk volume, which is the difference when you are refuelling a run of machines or topping a bulk tank and slow transfer is the bottleneck.\u003c\/p\u003e\n\u003cp\u003eCompatibility is broad for common fuels and light oils. It is listed for diesel, unleaded and leaded petrol, and kerosene, and for oils up to SAE30, which covers most farm and light-industrial transfer tasks. For heavier gear oils above SAE30 it is out of range, so keep it to fuels and lighter oils.\u003c\/p\u003e\n\u003cp\u003eIt arrives ready to run. A steel suction pipe with a foot strainer keeps debris out of the line at the drum, a 2in bung adapter mates it to standard drum bungs, and a 2.4 m delivery hose with a metal nozzle and holster gives you controlled dispensing and a home for the nozzle that cuts drips between jobs.\u003c\/p\u003e\n\u003cp\u003eThe foot strainer is the quiet detail that protects the machine you are filling, screening grit at the pickup before it reaches the tank rather than after. On mixed fuels and oils across a fleet, that is cheap insurance against carrying drum sediment into equipment.\u003c\/p\u003e\n\u003cp\u003eBecause it is hand-cranked rather than powered, there is nothing to plug in, charge or service beyond the seals, which keeps a high-flow pump usable on a paddock or a remote tank where a powered unit would sit idle for want of a supply. The metal nozzle and holster round it out as a tidy, self-contained transfer kit.\u003c\/p\u003e\n\u003cp\u003eIt fits both 60 L and 205 L drums, so one pump covers the common drum sizes on site. For engine oil and diesel only, the lower-cost cast iron AF-AP-2220 or aluminium AF-AP-1321 handle those without the higher flow, so step up to the 1320 when transfer speed and the wider fuel list are what you need.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482876829775,"sku":"AF-AP-1320","price":505.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1320-60l-205l-hi-flow-rotary-drum-pump.webp?v=1785301354"},{"product_id":"af-ls-1003","title":"AF-LS-1003 Transparent Oil Jug, UV Resistant, Anti-Static with Measurement Scale, 3L","description":"\u003cp\u003eThe LUBESMART AF-LS-1003 is a 3 litre transparent oil jug for measured top-ups on small to mid-sized equipment. It is supplied bare, so you choose the lid style and colour to suit the oil it will carry.\u003c\/p\u003e\n\u003cp\u003eLUBESMART runs on one rule: one jug, one oil, one colour. Give each lubricant on site its own lid colour and the container tells the operator what is in it from across the bay, which is the simplest way to keep the wrong oil out of the wrong machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated scale.\u003c\/strong\u003e Markings start at 0.5 L and rise in 0.25 L steps to 3 L, so each top-up is measured rather than guessed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear HDPE body.\u003c\/strong\u003e You can read the oil level at a glance, and UV and anti-static additives help the jug cope with sun and dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 mm wide mouth.\u003c\/strong\u003e Quick to fill and easy to wash out when the jug changes duty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed design.\u003c\/strong\u003e With a lid fitted the jug is sealed against dirt and moisture, and the on\/off breather switch controls airflow while you pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes any LUBESMART lid.\u003c\/strong\u003e Utility, stretch spout, mini spout and stumpy spout lids all fit, so one jug covers every pouring job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact.\u003c\/strong\u003e 160 mm wide and 269 mm tall, with a service temperature of 80°C. Small enough to live in a service kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482901995599,"sku":"AF-LS-1003","price":48.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1003-transparent-3l-oil-jug.webp?v=1785301368"},{"product_id":"af-ls-1005","title":"AF-LS-1005 Transparent Oil Jug, UV Resistant, Anti-Static with Measurement Scale, 5L","description":"\u003cp\u003eThe AF-LS-1005 is the 5 litre LUBESMART jug, the middle size in the range for workshop and service-truck top-ups. It comes bare, ready for whichever LUBESMART lid suits the oil and the fill point.\u003c\/p\u003e\n\u003cp\u003eLUBESMART runs on one rule: one jug, one oil, one colour. Give each lubricant on site its own lid colour and the container tells the operator what is in it from across the bay, which is the simplest way to keep the wrong oil out of the wrong machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated scale.\u003c\/strong\u003e Markings start at 0.5 L and rise in 0.25 L steps to 5 L, so each top-up is measured rather than guessed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear HDPE body.\u003c\/strong\u003e You can read the oil level at a glance, and UV and anti-static additives help the jug cope with sun and dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 mm wide mouth.\u003c\/strong\u003e Quick to fill and easy to wash out when the jug changes duty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed design.\u003c\/strong\u003e With a lid fitted the jug is sealed against dirt and moisture, and the on\/off breather switch controls airflow while you pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes any LUBESMART lid.\u003c\/strong\u003e Fit a utility, stretch spout, mini spout or stumpy spout lid, or a utility lid and Standard Pump for no-tip dispensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize.\u003c\/strong\u003e 196 mm wide and 271 mm tall, with a service temperature of 80°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482908745807,"sku":"AF-LS-1005","price":53.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1005-transparent-5l-oil-jug.webp?v=1785301369"},{"product_id":"af-ls-1010","title":"AF-LS-1010 Transparent Oil Jug, UV Resistant, Anti-Static with Measurement Scale, 10L","description":"\u003cp\u003eThe AF-LS-1010 is the largest LUBESMART jug, holding 10 litres for equipment that takes more oil at each service. You still pour to a printed scale, so a big fill is as controlled as a small one.\u003c\/p\u003e\n\u003cp\u003eSupplied bare, it takes any LUBESMART lid. LUBESMART runs on one rule: one jug, one oil, one colour. Give each lubricant on site its own lid colour and the container tells the operator what is in it from across the bay, which is the simplest way to keep the wrong oil out of the wrong machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated scale.\u003c\/strong\u003e Markings start at 0.5 L and rise in 0.25 L steps to 10 L, so each top-up is measured rather than guessed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear HDPE body.\u003c\/strong\u003e You can read the oil level at a glance, and UV and anti-static additives help the jug cope with sun and dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 mm wide mouth.\u003c\/strong\u003e Quick to fill and easy to wash out when the jug changes duty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed design.\u003c\/strong\u003e With a lid fitted the jug is sealed against dirt and moisture, and the on\/off breather switch controls airflow while you pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump option.\u003c\/strong\u003e Pair it with a LUBESMART Utility Lid and Standard Pump to dispense from the jug without lifting or tipping it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize.\u003c\/strong\u003e 252 mm wide and 348 mm tall, with a service temperature of 80°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482909990991,"sku":"AF-LS-1010","price":83.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1010-transparent-10l-oil-jug.webp?v=1785301371"},{"product_id":"af-uf-gfp-20","title":"AF-UF-GFP-20 Hand Operated Bucket Grease Pump 20kg","description":"\u003cp\u003eRefilling grease guns from a cartridge or a scoop is where half the grease ends up on the bench and the other half traps air. The AF-UF-GFP-20 is a hand-operated bucket pump that loads bulk and combination grease guns straight from a 20 kg bucket, cleanly and under control.\u003c\/p\u003e\n\u003cp\u003eThe pump's real work is done by the universal follower plate. It rides on the grease surface as you pump, keeping the feed consistent and stopping the air pockets that cause false fills, the ones where a gun feels full but delivers air at the fitting. That means a gun that is actually charged when you take it to the machine, not one that spits and stalls at the first zerk.\u003c\/p\u003e\n\u003cp\u003eBeing hand-operated, it needs no power or air, which makes it the tool for mobile service setups, farm sheds and remote machinery work where a compressor is not on hand. You stay in control of the fill, so there is less over-pressurising, less mess, and a steadier routine when you are charging guns for plant, ag gear, trucks and trailers.\u003c\/p\u003e\n\u003cp\u003eIt is a manual grease-filling solution rather than a dispensing pump, so it loads guns rather than greasing fittings directly. It handles bucket grease and is not a transfer pump for oils or fluids.\u003c\/p\u003e\n\u003cp\u003eThe robust build is the point on a tool handled roughly and often, dropped onto buckets and shifted between utes and sheds. A pump that holds up to that is one you fill guns with for years rather than replacing after a season of hard use.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you drop it onto a standard 20 kg grease bucket and pump to load your guns. Where you want to grease fittings directly off the bucket instead of loading guns, a pneumatic bucket pump kit is the setup to look at, so match the tool to whether you are filling guns or dispensing.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482945740879,"sku":"AF-UF-GFP-20","price":198.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-uf-gfp-20-hand-operated-bucket-grease-pump-20kg.webp?v=1785301373"},{"product_id":"af-am-8610","title":"AF-AM-8610 Plastic Enclosed Air\/Water Hose Reel, 15m x 3\/8\" Hose","description":"\u003cp\u003eAn air or water line left snaking across a workshop floor is a trip hazard and a hose that gets stood on, driven over and worn out early. The AF-AM-8610 is an enclosed air and water reel that keeps 15 m of line protected, retracted and ready to pull off in seconds.\u003c\/p\u003e\n\u003cp\u003eThe enclosed casing is the difference from an open reel. It is lightweight but built to take knocks, shielding both the hose and the rewind mechanism from the dust and impacts of daily workshop and service-truck life, so the moving parts are not exposed to everything that gets thrown at them.\u003c\/p\u003e\n\u003cp\u003eRewind is handled by an impact-resistant spring built for a long service life, so you get clean retraction rather than a tired reel that leaves the hose half out and underfoot. The hose itself is specified for flexibility, which cuts kinking and drag as you work around vehicles, plant and implements through the day.\u003c\/p\u003e\n\u003cp\u003eIt carries 15 m of 3\/8in hose (9.5 mm internal diameter), a line size that suits most compressed-air tools, blow guns, washdown and general utility work where you want reach without clutter. It runs air or water, so one reel covers both the airline and the washdown point in a bay.\u003c\/p\u003e\n\u003cp\u003eBecause it runs both air and water, one reel can cover the airline for tools and the washdown point for cleaning in the same bay, which cuts the number of lines strung across a workshop. Fewer reels and fewer loose hoses is a tidier, safer floor.\u003c\/p\u003e\n\u003cp\u003eA mounting bracket and inlet hose are included, so it goes onto a wall, gantry, canopy or trailer without sourcing extra fittings. Confirm the mounting position gives the hose a clear pull to your main work area before fixing it, so the 15 m works with you rather than around an obstacle.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482972643407,"sku":"AF-AM-8610","price":548.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-am-8610-plastic-enclosed-air-water-hose-reel.webp?v=1785301395"},{"product_id":"af-am-8612","title":"AF-AM-8612 Plastic Enclosed Air\/Water Hose Reel, 15m x 1\/2\" Hose","description":"\u003cp\u003eAir tools and washdown both want flow, and a narrow reel line throttles it. The AF-AM-8612 is the 1\/2in version of A-FLO's enclosed air and water reel, carrying 15 m of larger-bore hose so water and air move at the rate the job actually needs.\u003c\/p\u003e\n\u003cp\u003eThe 1\/2in hose, at 12.7 mm internal diameter, is the reason to pick this over the 3\/8in model. The wider bore supports stronger flow for wash-down, air tools and general service work, so where the smaller reel suits a blow gun and light air use, this one keeps up with higher-demand water and air jobs.\u003c\/p\u003e\n\u003cp\u003eThe enclosed casing is what protects that hose. Lightweight but built to take knocks, it shields both the line and the spring from dust, grime and the daily impacts of a workshop or service truck, so the moving parts are not exposed to everything the bay throws at them.\u003c\/p\u003e\n\u003cp\u003eRewind runs on an impact-resistant, high-performance spring built for a long service life, giving clean retraction rather than a tired reel that leaves hose underfoot. The hose itself is specified for flexibility, so it works with you around vehicles, plant and implements rather than kinking and dragging.\u003c\/p\u003e\n\u003cp\u003eA mounting bracket and inlet hose are included, so it goes onto a wall, workshop fit-out or mobile setup without sourcing extra fittings. It suits workshops, service vehicles, agriculture, earthmoving, mining and transport wherever a durable enclosed air or water reel keeps the floor clear.\u003c\/p\u003e\n\u003cp\u003eConfirm the mount gives the hose a clean pull to your main work area before fixing it, so the 15 m reach works with you. Where you only need light air for a blow gun, the 3\/8in AF-AM-8610 is the lighter-flow option in the same range.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482978574415,"sku":"AF-AM-8612","price":548.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-am-8612-plastic-enclosed-air-water-hose-reel.webp?v=1785301396"},{"product_id":"af-ls-1003sc","title":"AF-LS-1003SC 3L Oil Jug with 12mm Stretch Spout Lid","description":"\u003cp\u003eThis LUBESMART kit combines the 3 litre measuring jug with a 12 mm Stretch Spout lid. The extended spout gets oil into recessed fill points without tipping the jug at an awkward angle.\u003c\/p\u003e\n\u003cp\u003eLUBESMART runs on one rule: one jug, one oil, one colour. Give each lubricant on site its own lid colour and the container tells the operator what is in it from across the bay, which is the simplest way to keep the wrong oil out of the wrong machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 3 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can see the level and measure the pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 mm (1\/2\") outlet on an extended spout.\u003c\/strong\u003e Reaches fill points behind guards and brackets and gives a controlled pour of lower-viscosity oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto shut-off breather valve.\u003c\/strong\u003e Helps prevent accidental spills and keeps contaminants out while you dispense.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure fit.\u003c\/strong\u003e An advanced sealing thread locks the lid onto the jug, and the large handle makes it easy to carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Give each oil its own colour to stop cross-contamination and operator mix-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide mouth.\u003c\/strong\u003e The 120 mm opening makes the jug quick to fill and easy to clean, and every LUBESMART lid fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67605618720847,"sku":"AF-LS-1003SC-BK","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67605618753615,"sku":"AF-LS-1003SC-GR","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67605618688079,"sku":"AF-LS-1003SC-GY","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67605618524239,"sku":"AF-LS-1003SC-PK","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67605618557007,"sku":"AF-LS-1003SC-LB","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67605618589775,"sku":"AF-LS-1003SC-OR","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67605618622543,"sku":"AF-LS-1003SC-RD","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67605618655311,"sku":"AF-LS-1003SC-WH","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67605618491471,"sku":"AF-LS-1003SC-YL","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67611599306831,"sku":"AF-LS-1003SC-DB","price":116.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1003sc-yl-3l-oil-jug-yellow-stretch-spout-lid.webp?v=1785301415"},{"product_id":"af-es-30","title":"Enviropeat Organic Spill Absorbent 30L","description":"\u003cp\u003eA spill spreads fastest in the minutes before anyone reaches it, and clay absorbents are slow, dusty and a disposal problem of their own. Enviropeat is a natural organic absorbent that wicks oil, fuel and chemical spills up quickly, on land or water, so a spill is contained rather than chased across the floor.\u003c\/p\u003e\n\u003cp\u003eThe wicking action is what separates an organic absorbent from mineral clay. It draws hydrocarbons and other liquids into the material fast, which stops the spill spreading and means you use less product to cover it, cutting both what you store and what you pay to dispose of. A single 30 L bag absorbs approximately 25 L.\u003c\/p\u003e\n\u003cp\u003eMade from natural organic material, it is non-toxic in its unused state, non-abrasive and free of crystalline silica, so it does not add the dust hazard some mineral absorbents bring to a workshop. That matters for operator safety and for the environmental and workplace standards a professional site works to; it meets EPA guidelines and can be disposed of responsibly to local regulations.\u003c\/p\u003e\n\u003cp\u003eIt handles engine oil, diesel, hydraulic oil, coolants and other industrial liquids, and its loose granular structure doubles as a sweeping compound for lifting oily residue off concrete or asphalt once the main spill is up. It can also help solidify liquid waste so hazardous liquids can be moved safely in drums, which suits spill-response and maintenance crews.\u003c\/p\u003e\n\u003cp\u003eThe method is simple: spread it over the spill, let it wick in, sweep it through and bag the saturated material for disposal. No mixing, no water and no special gear, which is what lets any operator deal with a spill on the spot instead of waiting on a clean-up crew.\u003c\/p\u003e\n\u003cp\u003eAt roughly 6 kg a bag it is easy to keep on hand in service bays, on transport and ag sites and in emergency spill kits. A spill absorbent only works if it is within reach when the spill happens, so keep it where spills are likely rather than in a distant store.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483140448335,"sku":"AF-ES-30","price":43.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/a-flo-af-es-30-spill-kit-enviropeat-organic.webp?v=1793486664"},{"product_id":"af-zs-22","title":"Z-Sorb Industrial Oil Absorbent 22L","description":"\u003cp\u003eNot every spill is oil, and the ones that include acids, alkalis or solvents need an absorbent that can take them safely. Z-Sorb is a natural organic industrial absorbent that locks away oils, petroleum products, chemicals, acids and alkalis, containing a spill fast on concrete, asphalt or a workshop floor.\u003c\/p\u003e\n\u003cp\u003eRapid wicking is the core of it, drawing liquid in and holding it so the spill stops spreading and the slip hazard comes down. Beyond liquids, it helps suppress VOCs and can capture vapours and fumes during a spill response, which matters when the spill is a chemical rather than a plain oil.\u003c\/p\u003e\n\u003cp\u003eIt is made from all-natural organic material with no free crystalline silica, non-toxic in its unused state and compliant with EPA guidelines, so it is safer to handle and helps a site meet its environmental and workplace obligations. It leaves minimal residue, works indoors or out, and stays put and usable even in windy conditions, where lighter absorbents blow away before they can work.\u003c\/p\u003e\n\u003cp\u003eIt also doubles as a sweeping compound for lifting residual oil films, chemical traces and grime off concrete and asphalt after the main spill is up. The method is straightforward: spread it over the spill from around 150 mm above, let it soak in, sweep it through with a stiff broom, and dispose of the saturated material to site or local regulations.\u003c\/p\u003e\n\u003cp\u003eSupplied in a 22 L bag at about 15 kg, it gives strong coverage while staying economical, which suits busy workshops, transport depots, farms and service operations that need a dependable absorbent on hand. For a lighter organic absorbent aimed mainly at oil and fuel, the Enviropeat 30 L is the companion in the range.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483162501199,"sku":"AF-ZS-22","price":38.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/a-flo-af-zs-22-z-sorb-industrial-oil-absorbent-22l.webp?v=1793486664"},{"product_id":"af-fc-eco100","title":"AF-FC-ECO100 Polycube ECO 100L Diesel Ute Tank with Standard 12V Pump Kit","description":"\u003cp\u003eDriving back to the depot to refuel is time the job is not getting done, and on a paddock or a remote site there may be no depot to reach. The A-FLO Polycube ECO100 is a 100 L diesel ute tank with a 12V pump kit, built to carry your own fuel and dispense it in the field.\u003c\/p\u003e\n\u003cp\u003eThe tank is thick-walled, rotationally moulded polyethylene, durable but light enough for a practical ute or service-vehicle install, and its compact cube shape sits stably in a tray without taking the whole bed. At 100 L it is the smallest of the range, the balance of portability and usable fuel for a mobile workshop, a contractor or a field tech who needs a day of diesel, not a week. Its usable safe fill is about 90 L.\u003c\/p\u003e\n\u003cp\u003eThe standard 12V pump kit delivers 40 lpm and runs off the vehicle battery through a 4 m cable with battery clips, so no site power is needed. Fuel goes out through a 4 m by 3\/4in delivery hose with a swivel fitting and an automatic shut-off nozzle, which gives control at the fill and stops the overfills that waste diesel and foul the ground.\u003c\/p\u003e\n\u003cp\u003eA built-in splash-proof breather stops pressure building as you dispense, keeping the flow consistent, and a pad-lockable lid protects the fuel and pump from tampering or theft when the vehicle is left unattended. On a ute that parks at job sites, that lock is the difference between fuel that is there in the morning and fuel that is not.\u003c\/p\u003e\n\u003cp\u003eIt runs off 12V, so it is a mobile tank for a vehicle rather than a fixed-site unit, and it dispenses diesel only. For higher-demand refuelling it can be upgraded to a premium 12V pump with a continuous duty cycle.\u003c\/p\u003e\n\u003cp\u003eIn the field it fuels tractors, light machinery, generators and work vehicles for a day's run.\u003c\/p\u003e\n\u003cp\u003eWhere a day's diesel is not enough, the 200 L, 500 L and 1000 L ECO tanks scale the same system up, so size the tank to how much fuel you burn between refills and how much tray you can give it.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483174330447,"sku":"AF-FC-ECO100","price":1125.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-eco100-polycube-eco-100l-diesel-ute-tank.webp?v=1785301425"},{"product_id":"af-fc-eco200","title":"AF-FC-ECO200 Polycube ECO 200L Diesel Ute Tank with Standard 12V Pump Kit","description":"\u003cp\u003eTwo hundred litres of diesel on the ute is roughly a week of running for a lot of operations, the point where a mobile tank stops being a top-up and becomes your fuel supply. The A-FLO Polycube ECO200 carries that on a 12V pump kit, sized to keep machinery fuelled in the field between depot runs.\u003c\/p\u003e\n\u003cp\u003eThe tank measures 1050 by 747 by 570 mm and weighs 36 kg empty, a thick-walled polyethylene cube shaped to sit stably in a ute tray or service body while leaving room to work. It is the size up from the 100 L for operators who want more range without a tank that dominates the tray. Of the 200 L capacity, safe fill is about 190 L.\u003c\/p\u003e\n\u003cp\u003eThe 12V pump kit delivers 40 lpm off the vehicle battery through a 4 m cable with battery clips, dispensing through a 4 m by 3\/4in hose and an automatic shut-off nozzle that controls the fill and prevents overfills. A splash-proof breather keeps pressure and flow steady, and a pad-lockable lid secures the fuel and pump when the ute is parked up.\u003c\/p\u003e\n\u003cp\u003eIt carries a 12-month warranty on the standard pump kit, and the pump can be upgraded to a premium 12V unit with a 35 lpm continuous duty cycle for higher-demand refuelling where the standard pump would be working hard. Being 12V, it is a mobile, vehicle-powered tank rather than a fixed-site unit, and it holds diesel only.\u003c\/p\u003e\n\u003cp\u003eIt refuels tractors, excavators, generators and fleet vehicles between depot trips.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you mount it in the tray and clip the pump to the battery. Where 200 L is short for your run, the 500 L and 1000 L ECO tanks scale up, and where you want less bulk, the 100 L is the compact option.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483192942671,"sku":"AF-FC-ECO200","price":1241.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-eco200-polycube-eco-200l-diesel-ute-tank.webp?v=1785301427"},{"product_id":"af-fc-eco500","title":"AF-FC-ECO500 Polycube ECO 500L Diesel Ute Tank with Standard 12V Pump Kit","description":"\u003cp\u003eAt 500 L, a ute tank stops being a convenience and becomes the fuel point a small operation runs from. The A-FLO Polycube ECO500 holds that on the same 12V pump system, sized for utes, service trucks, farms and construction sites that burn real diesel across a week.\u003c\/p\u003e\n\u003cp\u003eThe tank is 1720 by 760 by 760 mm and 58 kg empty, thick-walled polyethylene in the Polycube form, long enough to want a full-size tray or service body but still a mobile unit rather than a fixed installation. It is the step where capacity starts to change what the tank can supply, covering a run of machines between depot trips. Safe fill is about 450 L of the 500 L capacity.\u003c\/p\u003e\n\u003cp\u003eIts 12V pump delivers 40 lpm from the vehicle battery through a 4 m clip cable, with a 4 m by 3\/4in hose and an automatic shut-off nozzle on a swivel fitting for controlled, spill-free fills. A splash-proof breather holds the flow steady and a pad-lockable lid protects fuel and pump on an unattended vehicle.\u003c\/p\u003e\n\u003cp\u003eIt carries a 12-month warranty on the standard pump kit and takes the optional premium 12V pump with a 35 lpm continuous duty cycle for higher-demand use. As a 12V unit it is mobile and vehicle-powered, for diesel only, not a mains-fed fixed tank.\u003c\/p\u003e\n\u003cp\u003eAt this size it supplies a run of machines across a week, from excavators and loaders to tractors and trucks.\u003c\/p\u003e\n\u003cp\u003eCheck your tray length and load rating suit a 1720 mm, 58 kg empty tank plus 500 L of fuel before you commit, since full it is a serious load. Where you need more again, the 1000 L ECO tank is the next step, and where 500 L is more than the vehicle should carry, the 200 L is the lighter option.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483210080335,"sku":"AF-FC-ECO500","price":1755.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-eco500-polycube-eco-500l-diesel-ute-tank.webp?v=1785301439"},{"product_id":"af-fc-dd600hr","title":"AF-FC-DD600HR Polytank 600L Square Diesel Tank with 12V Pump Kit \u0026 10m Hose Reel","description":"\u003cp\u003eThe difference between a tank and an on-site fuel station is a hose reel and a gauge you can read at a glance. The A-FLO DD600HR adds both, a 600 L square diesel Polytank with a 12V pump kit, a 10 m hose reel and an integrated level gauge for a proper refuelling point.\u003c\/p\u003e\n\u003cp\u003eIts 12V pump delivers 56 lpm, faster than the ECO ute range, so filling larger machinery means less standing around. The 10 m hose reel is the practical upgrade over a loose delivery hose, reaching across a yard to the machine and retracting out of the way after rather than being coiled and tripped over. An automatic shut-off nozzle controls the fill.\u003c\/p\u003e\n\u003cp\u003eThe integrated fuel level gauge lets you see what is left without dipping the tank, so a refuel is planned rather than a surprise, and a breather system prevents pressure build-up during dispensing. A lockable lid secures the fuel and equipment on an unattended site.\u003c\/p\u003e\n\u003cp\u003eThe tank is thick-walled polyethylene in a square form, 1150 by 950 by 1070 mm and 120 kg empty, with a safe fill of about 550 L of its 600 L capacity, a stable, semi-permanent unit that suits a farm, workshop or yard fuel point more than a daily-moving ute. It runs on 12V through a 4 m battery cable, dispenses diesel only, and carries a 1 year warranty on the equipment, excluding wear and tear.\u003c\/p\u003e\n\u003cp\u003eAs a yard fuel point it refuels tractors, excavators, loaders and trucks straight off the hose reel.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you site it on firm, level ground within battery-cable reach of a 12V supply and leave the hose reel a clear pull to where you fuel. Where you need more capacity in the same square format, the 800 L DD800HR is the step up.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483214209103,"sku":"AF-FC-DD600HR","price":4451.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-dd600hr-polytank-600l-square-diesel-tank.webp?v=1785301437"},{"product_id":"af-fc-dd800hr","title":"AF-FC-DD800HR Polytank 800L Square Diesel Tank with 12V Pump Kit \u0026 10m Hose Reel","description":"\u003cp\u003eWhere a 600 L on-site tank empties faster than the refill cycle suits, the extra 200 L closes the gap. The A-FLO DD800HR is the 800 L square diesel Polytank, the same 12V pump, 10 m hose reel and level-gauge setup with more fuel between fills.\u003c\/p\u003e\n\u003cp\u003eThe 12V pump delivers 56 lpm through the 10 m hose reel and an automatic shut-off nozzle, so it fills larger machinery quickly and the reel keeps the hose managed and off the ground between jobs. It is built as an on-site refuelling point rather than a mobile tank, for yards, farms and workshops.\u003c\/p\u003e\n\u003cp\u003eAn integrated fuel level gauge shows what is left at a glance so refuels are planned, and a breather system keeps pressure and flow steady during dispensing. A lockable lid protects the fuel and pump when the site is unattended.\u003c\/p\u003e\n\u003cp\u003eThe tank is thick-walled polyethylene, 1150 by 950 by 1260 mm and 128 kg empty, with a safe fill of about 750 L of its 800 L capacity, the same footprint as the 600 L but taller for the added volume, so it fits the same ground space while holding more. It runs on 12V through a 4 m battery cable, dispenses diesel only, and carries a 1 year warranty on the equipment, excluding wear and tear.\u003c\/p\u003e\n\u003cp\u003eIt serves a busy yard's excavators, loaders, tractors and fleet vehicles from one fixed point.\u003c\/p\u003e\n\u003cp\u003eSite it on firm, level ground within reach of a 12V supply, with the hose reel facing your fuelling area. Where 800 L is still short and the tank can be mains-powered and stationary, the self-bunded 2500 L DD2500 is the larger, compliance-grade option.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483221844047,"sku":"AF-FC-DD800HR","price":4506.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-dd800hr-polytank-800l-square-diesel-tank.webp?v=1785301438"},{"product_id":"af-fc-dd2500-240v","title":"AF-FC-DD2500 Polycube 2500L Self-Bunded Diesel Tank with 240V Pump \u0026 10m Hose Reel","description":"\u003cp\u003eBulk diesel stored on site brings a compliance question a ute tank never does: what happens if it leaks. The A-FLO DD2500 answers it with integrated secondary containment, a 2500 L self-bunded diesel tank built for stationary on-site storage where a spill has to be contained by design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires 240V mains power. This is a fixed-site tank with an electric 240V pump, not a 12V mobile or ute-mounted unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSelf-bunded means the tank sits inside a second wall that forms a built-in bund, so if the inner tank ever fails, the fuel is caught in the containment rather than reaching the ground. That is what lets a site hold 2500 L of diesel and meet secondary-containment expectations without building a separate bund around it. Safe fill is about 2450 L.\u003c\/p\u003e\n\u003cp\u003eThe tank is UV-stabilised polyethylene, 2330 by 1680 by 1300 mm and 400 kg empty, built to stand outdoors without a steel tank's corrosion, and it runs a 240V electric transfer pump delivering 56 lpm for mains-powered dispensing at a fixed point. A 10 m spring-retractable hose reel with a 3\/4in hose and an automatic diesel nozzle reaches across the fuelling area and rewinds clean, so the setup works as a permanent refuelling station.\u003c\/p\u003e\n\u003cp\u003eIt suits farms, workshops, transport depots and construction sites that store fuel in volume and refuel from one location. Because it is 240V and self-bunded, it is designed to stay put rather than move between sites.\u003c\/p\u003e\n\u003cp\u003eAs a static bulk store it refuels site plant, excavators, dozers, generators and truck fleets from one bunded tank.\u003c\/p\u003e\n\u003cp\u003eTo commission it you need a 240V supply at the tank's location on firm, level ground, positioned so the 10 m reel covers where you fuel. For mobile refuelling off a vehicle battery instead, the 12V ECO ute tanks and DD Polytank range are the units to look at.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483253596239,"sku":"AF-FC-DD2500 240V","price":9807.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-dd2500-240v-polycube-2500l-self-bunded-diesel-tank.webp?v=1785301436"},{"product_id":"af-fg-205","title":"AF-FG-205 205L Drum Level Gauge","description":"\u003cp\u003eTilting a 205 L drum to guess what is left is how a job stalls halfway through for want of oil nobody checked. The AF-FG-205 drum level gauge reads the contents at a glance without opening the drum, so a refill is planned rather than discovered mid-service.\u003c\/p\u003e\n\u003cp\u003eIt is a float-style visual level indicator that screws directly into the 2 in BSP drum bung, which makes it compatible with most standard 205 L oil and lubricant drums. Once fitted, the float rides on the fluid surface and gives a consistent reading as the drum empties, so you see the level the same way every time rather than dipping or estimating.\u003c\/p\u003e\n\u003cp\u003eKeeping the drum closed is more than convenience. Every time a drum is opened to check it, dust and moisture get a chance to enter, and on modern engines and hydraulic systems clean oil is what protects the components, so a gauge that reads without opening helps keep the oil clean as well as the inventory visible.\u003c\/p\u003e\n\u003cp\u003eIt is built from durable, oil-resistant materials for daily workshop use, standing up to oil exposure and temperature swings on engine oil, hydraulic oil, gear oil and other lubricants. For a workshop, farm or fleet running several drums at once, it turns fluid stock from guesswork into something you can plan maintenance and reordering around.\u003c\/p\u003e\n\u003cp\u003eTo fit it you simply thread it into the 2 in BSP bung of a standard 205 L drum. It reads oils and lubricants and is a level gauge rather than a dispenser, so pair it with a drum or barrel pump to draw fluid from the same drum.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483270471759,"sku":"AF-FG-205","price":105.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fg-205-205l-drum-level-gauge.webp?v=1785301440"},{"product_id":"af-ap-1142-450","title":"AF-AP-1142-450 450g Standard Lever Action Grease Gun","description":"\u003cp\u003eDry, high-resistance grease points are where a weak gun flexes and gives up, and a stubborn zerk turns a five-minute job into a fight. The AF-AP-1142-450 is a 450 g lever-action grease gun with the pressure and simplicity to push through them.\u003c\/p\u003e\n\u003cp\u003eIt develops up to 310 bar (31,000 kPa \/ 4,500 psi) (4,500 psi), with a 690 bar (69,000 kPa \/ 10,000 psi) (10,000 psi) burst rating for margin, which is what forces grease into dry bearings, pins and bushes that low-pressure guns cannot feed. The lever action gives the leverage for that pressure by hand, with no batteries to charge and no air line to run, which suits shed, yard and field maintenance where a powered gun is not practical.\u003c\/p\u003e\n\u003cp\u003eIt is fitted as standard with an air valve and a bulk filler, so loading grease is quicker and cleaner whether you fill from a bulk pump or a cartridge, which keeps servicing moving in a busy bay. It comes with a rigid outlet tube and a 4-jaw coupler that bites and holds on the grease nipple for a secure connection that resists blowing off under pressure.\u003c\/p\u003e\n\u003cp\u003eThis suits routine maintenance across agricultural equipment, trucks, trailers, earthmoving gear, service vehicles and general workshop machinery. It dispenses grease and is not intended for oils or fluids.\u003c\/p\u003e\n\u003cp\u003eIt is hand-operated and ready to use with the rigid outlet and coupler fitted. Where the grease points sit behind guards or in tight chassis pockets that a rigid tube cannot line up on, the pistol-grip AF-AP-1152-450 pairs the same pressure with a 300 mm flexible outlet, and it is the better tool where fittings need reach rather than a straight, rigid connection.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483277680719,"sku":"AF-AP-1142-450","price":70.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1142-450-450g-standard-lever-action-grease.webp?v=1785301429"},{"product_id":"af-ap-1152-450","title":"AF-AP-1152-450 450g Standard Pistol Grip Grease Gun","description":"\u003cp\u003eGreasing around guards, suspension and confined engine bays is where a rigid gun cannot line up and a spilled fitting wastes grease. The AF-AP-1152-450 is a 450 g pistol-grip grease gun built for one-handed control and reach in exactly those spots.\u003c\/p\u003e\n\u003cp\u003eThe pistol grip gives better one-handed control in tight service areas than a lever gun, and it ships with a 300 mm flexible outlet and a 4-jaw coupler so you can reach awkward grease points on machinery, trailers and implements without fighting the fitting. The flexible outlet is what gets grease to points a rigid tube cannot align with.\u003c\/p\u003e\n\u003cp\u003eIt develops up to 310 bar (31,000 kPa \/ 4,500 psi) (4,500 psi) with a 690 bar (69,000 kPa \/ 10,000 psi) (10,000 psi) burst rating, enough pressure for routine greasing across a wide range of equipment while holding up in demanding service. An air bleeder valve and bulk filler are fitted as standard, which speeds priming and refilling and clears the air locks that otherwise stall a gun after a cartridge change.\u003c\/p\u003e\n\u003cp\u003eIt suits workshop, agricultural, industrial, truck, bus and earthmoving work where dependable manual lubrication matters. It dispenses grease and is not intended for oils or fluids.\u003c\/p\u003e\n\u003cp\u003eIt is hand-operated and ready to run with the flexible outlet and coupler fitted. Where your fittings are open and a straight, rigid connection is quicker, the lever-action AF-AP-1142-450 gives the same pressure with a rigid outlet, so match the outlet to where your grease points sit.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483285446735,"sku":"AF-AP-1152-450","price":95.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1152-450-450g-standard-pistol-grip-grease.webp?v=1785301430"},{"product_id":"af-fc-100lfa","title":"AF-FC-100LFA Polycube 100L Diesel Tank with Premium 12V Pump Kit","description":"\u003cp\u003eA slow pump turns a quick refuel into standing time, and a small tank that still fills machinery fast is the useful combination on a working ute. The AF-FC-100LFA is a 100 L Polycube diesel tank matched to a premium 12V pump that moves 50 lpm.\u003c\/p\u003e\n\u003cp\u003eThe premium pump is the difference from the standard ECO tanks: it delivers 50 lpm against the standard kit's 40, so refuelling is quicker, and it runs a 30-minute duty cycle for regular transfer work. It comes ready to work with a 4 m by 3\/4in diesel delivery hose, an automatic nozzle and a battery cable with clips that connects straight to the vehicle battery, so no site power is needed.\u003c\/p\u003e\n\u003cp\u003eThe tank is Polycube polyethylene with increased wall thickness for strength and service life, sized at 800 by 680 by 465 mm and 30 kg empty so it sits in a slim, manageable footprint on the back of a ute without taking the tray. A built-in splash-proof breather keeps flow steady and a lockable lid protects the fuel and pump when the vehicle is left unattended.\u003c\/p\u003e\n\u003cp\u003eIt is a mobile, 12V diesel tank for utes and trucks and dispenses diesel only, not AdBlue. Optional mounting frame and forklift slipper accessories are available for easier transport and handling.\u003c\/p\u003e\n\u003cp\u003eIt refuels tractors, light machinery, generators and work vehicles out in the field.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you mount it in the tray and clip the pump to the battery. Where you need more fuel between fills, the 200 L low-profile and 400 L versions run the same premium 50 lpm kit, so size the tank to your range and tray space.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483286134863,"sku":"AF-FC-100LFA","price":1934.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-100lfa-polycube-100l-diesel-tank-exterior.webp?v=1785301421"},{"product_id":"af-fc-200lfa","title":"AF-FC-200LFA Polycube 200L Low Profile Diesel Tank with Premium 12V Pump Kit","description":"\u003cp\u003eTray space is the constraint on a working ute, and a low-profile tank that still holds a genuine 200 L is how you keep both the fuel and the load room. The AF-FC-200LFA is a low-profile Polycube diesel tank on a premium 12V 50 lpm pump.\u003c\/p\u003e\n\u003cp\u003eThe low-height design is the point: at 1150 by 820 by 565 mm and 39 kg empty, it holds 200 L while keeping the tray accessible and visibility clear, which suits farms, workshops, civil sites and mobile maintenance where space is tight. It is the middle size, enough to cut fuel runs without dominating the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe premium 12V pump delivers 50 lpm on a 30-minute duty cycle, faster than the standard 40 lpm ECO kit, and comes complete with a 4 m by 3\/4in diesel hose, an automatic nozzle and a battery cable with clips for a ready-to-deploy setup off the vehicle battery. A splash-proof breather keeps the flow steady and a lockable lid secures the fuel and pump.\u003c\/p\u003e\n\u003cp\u003eBuilt from Polycube polyethylene with increased wall thickness for strength over rough tracks and yards, it is a mobile 12V diesel tank and dispenses diesel only, not AdBlue.\u003c\/p\u003e\n\u003cp\u003eIt suits refuelling machinery, service vehicles and onsite equipment across farms, civil sites and workshops.\u003c\/p\u003e\n\u003cp\u003eTo fit it you mount it in the tray and clip to the battery. Where 200 L is short, the 400 L version runs the same premium kit, and where you want the smallest footprint, the 100 L is the compact option.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483300520015,"sku":"AF-FC-200LFA","price":2141.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-200lfa-polycube-200l-low-profile-diesel-tank.webp?v=1785301433"},{"product_id":"af-fc-400lfa","title":"AF-FC-400LFA Polycube 400L Diesel Tank with Premium 12V Pump Kit","description":"\u003cp\u003eMore onboard diesel means fewer trips back for fuel, and the 400 L Polycube is the size where a ute tank starts supplying a day's plant rather than a machine or two. The AF-FC-400LFA carries that on a premium 12V pump that moves 50 lpm.\u003c\/p\u003e\n\u003cp\u003eThe tank is Polycube polyethylene with increased wall thickness for strength, impact resistance and service life in Australian conditions, sized at 1150 by 820 by 780 mm and 45 kg empty, more storage than the smaller ute tanks while staying compact enough for many mobile setups. A splash-proof breather and lockable lid protect fuel quality and security in transport.\u003c\/p\u003e\n\u003cp\u003eThe premium 12V pump delivers 50 lpm on a 30-minute duty cycle, and the kit ships complete with a 4 m by 3\/4in diesel hose, an automatic nozzle and a battery cable with clips, so it works off the vehicle battery straight out of the box rather than needing extra components added later.\u003c\/p\u003e\n\u003cp\u003eIt is a mobile 12V diesel tank for utes and trucks and dispenses diesel only, not AdBlue. Optional mounting frame and forklift slipper accessories are available for handling and installation.\u003c\/p\u003e\n\u003cp\u003eIt fuels machinery, service vehicles and plant across farm, workshop and fleet yards.\u003c\/p\u003e\n\u003cp\u003eConfirm your tray and vehicle can carry 400 L of diesel before ordering, since full it is a serious load. Where you need less bulk, the 200 L low-profile and 100 L versions run the same premium 50 lpm kit, so match the tank to your range and tray.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483310022735,"sku":"AF-FC-400LFA","price":3064.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-400lfa-polycube-400l-diesel-tank-exterior.webp?v=1785301423"},{"product_id":"af-fc-eco1000","title":"AF-FC-ECO1000 Polycube ECO 1000L Diesel Ute Tank with Standard 12V Pump Kit","description":"\u003cp\u003eA thousand litres is the largest of the ECO range and the point where a mobile tank supplies a whole site's plant rather than a vehicle or two. The A-FLO Polycube ECO1000 carries it on the 12V pump kit, for operations that would otherwise be making constant depot runs.\u003c\/p\u003e\n\u003cp\u003eThe tank is 1680 by 1130 by 860 mm and 100 kg empty, thick-walled, thickened polyethylene built to hold that volume, and full it is a heavy, wide load that needs a suitable tray or service body and a vehicle rated to carry it. This is the size to specify when fuel range is the constraint and you have the vehicle to match. Safe fill is about 950 L of the 1000 L capacity.\u003c\/p\u003e\n\u003cp\u003eThe standard 12V pump delivers 40 lpm from the vehicle battery through a 4 m clip cable, dispensing via a 4 m by 3\/4in hose and an automatic shut-off nozzle for controlled fills without overflow. A splash-proof breather keeps flow consistent as the tank empties, and a pad-lockable lid secures fuel and pump when the vehicle is left.\u003c\/p\u003e\n\u003cp\u003eIt carries a 12-month warranty on the standard pump kit and can be upgraded to the premium 12V pump with a 35 lpm continuous duty cycle, worth considering at this capacity where the pump does more work per shift. As a 12V unit it stays mobile and vehicle-powered, for diesel only.\u003c\/p\u003e\n\u003cp\u003eOne tank keeps a whole site's plant fuelled, from excavators and dozers to tractors and generators.\u003c\/p\u003e\n\u003cp\u003eConfirm your vehicle and tray can carry 1000 L of diesel, roughly a tonne of fuel plus the tank, before ordering. If the tank will live in one place and run off mains power, the self-bunded DD2500 with a 240V pump is the fixed-site alternative, and for a smaller mobile load the 500 L ECO steps down.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":46491735392335,"sku":"AF-FC-ECO1000","price":3250.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fc-eco1000-polycube-1000l-ute-diesel-tank.webp?v=1793487216"},{"product_id":"3l-oil-jug-with-6mm-mini-spout-lid","title":"AF-LS-1003MI 3L Oil Jug with 6mm Mini Spout Lid","description":"\u003cp\u003eThis LUBESMART kit pairs the 3 litre measuring jug with a 6 mm Mini Spout lid, for precise top-ups where the fill hole is small and the margin for spills is smaller.\u003c\/p\u003e\n\u003cp\u003eLUBESMART runs on one rule: one jug, one oil, one colour. Give each lubricant on site its own lid colour and the container tells the operator what is in it from across the bay, which is the simplest way to keep the wrong oil out of the wrong machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 3 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can see the level and measure the pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm (1\/4\") outlet.\u003c\/strong\u003e A narrow spout for precise, low-flow pouring in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for small fill points.\u003c\/strong\u003e Suits constant level oilers, machine tools and other small openings where a wide pour would spill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Give each oil its own colour to stop cross-contamination and operator mix-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide mouth.\u003c\/strong\u003e The 120 mm opening makes the jug quick to fill and easy to clean, and every LUBESMART lid fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67611515191375,"sku":"AF-LS-1003MI-BK","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67611515224143,"sku":"AF-LS-1003MI-GR","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67611515256911,"sku":"AF-LS-1003MI-GY","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67611515289679,"sku":"AF-LS-1003MI-LB","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67611515322447,"sku":"AF-LS-1003MI-OR","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67611515355215,"sku":"AF-LS-1003MI-PK","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67611515387983,"sku":"AF-LS-1003MI-RD","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67611515420751,"sku":"AF-LS-1003MI-WH","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67611515453519,"sku":"AF-LS-1003MI-YL","price":116.6,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67611515486287,"sku":"AF-LS-1003MI-DB","price":116.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1003mi-rd-3l-oil-jug-red-mini-spout-lid.webp?v=1790987016"},{"product_id":"3l-oil-jug-with-stumpy-spout-lid","title":"AF-LS-1003SP 3L Oil Jug with Stumpy Spout Lid","description":"\u003cp\u003eThis LUBESMART kit puts a Stumpy Spout lid on the 3 litre measuring jug, a compact set-up for direct pours on small to mid-sized equipment.\u003c\/p\u003e\n\u003cp\u003eLUBESMART runs on one rule: one jug, one oil, one colour. Give each lubricant on site its own lid colour and the container tells the operator what is in it from across the bay, which is the simplest way to keep the wrong oil out of the wrong machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 3 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can see the level and measure the pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort, direct spout.\u003c\/strong\u003e The stumpy spout pours straight into the fill point, for jobs where you do not need the reach of a stretch spout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps the oil clean.\u003c\/strong\u003e The jug and lid stay closed between jobs, so dirt and moisture are kept out of the oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Give each oil its own colour to stop cross-contamination and operator mix-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide mouth.\u003c\/strong\u003e The 120 mm opening makes the jug quick to fill and easy to clean, and every LUBESMART lid fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67611636105295,"sku":"AF-LS-1003SP-BK","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67611636138063,"sku":"AF-LS-1003SP-GR","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67611636170831,"sku":"AF-LS-1003SP-GY","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67611636203599,"sku":"AF-LS-1003SP-LB","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67611636236367,"sku":"AF-LS-1003SP-OR","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67611636269135,"sku":"AF-LS-1003SP-PK","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67611636301903,"sku":"AF-LS-1003SP-RD","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67611636334671,"sku":"AF-LS-1003SP-WH","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67611636367439,"sku":"AF-LS-1003SP-YL","price":119.9,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67611636400207,"sku":"AF-LS-1003SP-DB","price":119.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1003sp-pk-3l-oil-jug-pink-stumpy-spout-lid.webp?v=1790990176"},{"product_id":"5l-oil-jug-with-mini-spout-lid","title":"AF-LS-1005MI 5L Oil Jug with 6mm Mini Spout Lid","description":"\u003cp\u003eThis kit matches the 5 litre LUBESMART jug with a 6 mm Mini Spout lid. You get enough oil on hand to work through several machines, delivered through a narrow spout that puts it exactly where it needs to go.\u003c\/p\u003e\n\u003cp\u003eEvery LUBESMART lid fits every LUBESMART jug, so you can standardise containers across the workshop and change spouts as jobs change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 5 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can see the level and measure the pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm (1\/4\") outlet.\u003c\/strong\u003e A narrow spout for precise, low-flow pouring in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for small fill points.\u003c\/strong\u003e Suits constant level oilers, machine tools and other small openings where a wide pour would spill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Give each oil its own colour to stop cross-contamination and operator mix-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide mouth.\u003c\/strong\u003e The 120 mm opening makes the jug quick to fill and easy to clean, and every LUBESMART lid fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67611758493775,"sku":"AF-LS-1005MI-BK","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67611758526543,"sku":"AF-LS-1005MI-GR","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67611758559311,"sku":"AF-LS-1005MI-GY","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67611758592079,"sku":"AF-LS-1005MI-LB","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67611758624847,"sku":"AF-LS-1005MI-OR","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67611758657615,"sku":"AF-LS-1005MI-PK","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67611758690383,"sku":"AF-LS-1005MI-RD","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67611758723151,"sku":"AF-LS-1005MI-WH","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67611758755919,"sku":"AF-LS-1005MI-YL","price":123.2,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67611758788687,"sku":"AF-LS-1005MI-DB","price":123.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1005mi-gy-5l-jug-with-grey-mini-spout-lid.webp?v=1791006074"},{"product_id":"5l-jug-with-stretch-spout-lid","title":"AF-LS_1005SC 5L Jug with 12mm Stretch Spout Lid","description":"\u003cp\u003eThe 5 litre LUBESMART jug with a 12 mm Stretch Spout lid is built for fill points that sit behind guards, hoses and brackets. The extended spout does the reaching, so the oil goes in, not over the engine.\u003c\/p\u003e\n\u003cp\u003eEvery LUBESMART lid fits every LUBESMART jug, so you can standardise containers across the workshop and change spouts as jobs change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 5 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can see the level and measure the pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 mm (1\/2\") outlet on an extended spout.\u003c\/strong\u003e Reaches fill points behind guards and brackets and gives a controlled pour of lower-viscosity oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto shut-off breather valve.\u003c\/strong\u003e Helps prevent accidental spills and keeps contaminants out while you dispense.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure fit.\u003c\/strong\u003e An advanced sealing thread locks the lid onto the jug, and the large handle makes it easy to carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Give each oil its own colour to stop cross-contamination and operator mix-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide mouth.\u003c\/strong\u003e The 120 mm opening makes the jug quick to fill and easy to clean, and every LUBESMART lid fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67619000975439,"sku":"AF-LS-1005SC-BK","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67619001008207,"sku":"AF-LS-1005SC-GR","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67619001040975,"sku":"AF-LS-1005SC-GY","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67619001073743,"sku":"AF-LS-1005SC-LB","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67619001106511,"sku":"AF-LS-1005SC-OR","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67619001139279,"sku":"AF-LS-1005SC-PK","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67619001172047,"sku":"AF-LS-1005SC-RD","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67619001204815,"sku":"AF-LS-1005SC-WH","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67619001237583,"sku":"AF-LS-1005SC-YL","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67619001270351,"sku":"AF-LS-1005SC-DB","price":98.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1005sc-db-5l-jug-with-dark-blue-stretch-spout-lid.webp?v=1791082247"},{"product_id":"5l-jug-with-stumpy-spout-lid","title":"AF-LS_1005SP 5L Jug with Stumpy Spout Lid","description":"\u003cp\u003eThe 5 litre LUBESMART jug with a Stumpy Spout lid is a straightforward pouring kit with a short, direct spout.\u003c\/p\u003e\n\u003cp\u003eEvery LUBESMART lid fits every LUBESMART jug, so you can standardise containers across the workshop and change spouts as jobs change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 5 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can see the level and measure the pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort, direct spout.\u003c\/strong\u003e The stumpy spout pours straight into the fill point, for jobs where you do not need the reach of a stretch spout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps the oil clean.\u003c\/strong\u003e The jug and lid stay closed between jobs, so dirt and moisture are kept out of the oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Give each oil its own colour to stop cross-contamination and operator mix-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide mouth.\u003c\/strong\u003e The 120 mm opening makes the jug quick to fill and easy to clean, and every LUBESMART lid fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67619006545999,"sku":"AF-LS-1005SP-BK","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67619006578767,"sku":"AF-LS-1005SP-GR","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67619006611535,"sku":"AF-LS-1005SP-GY","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67619006644303,"sku":"AF-LS-1005SP-LB","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67619006677071,"sku":"AF-LS-1005SP-OR","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67619006709839,"sku":"AF-LS-1005SP-PK","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67619006742607,"sku":"AF-LS-1005SP-RD","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67619006775375,"sku":"AF-LS-1005SP-WH","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67619006808143,"sku":"AF-LS-1005SP-YL","price":126.5,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67619006840911,"sku":"AF-LS-1005SP-DB","price":126.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1005sp-or-5l-oil-jug-orange-stumpy-spout-lid.webp?v=1791082715"},{"product_id":"5l-jug-with-utility-lid","title":"AF-LS-1005UT 5L Jug with Utility Lid","description":"\u003cp\u003eThis kit pairs the 5 litre LUBESMART jug with a Utility Lid. It is the general-purpose set-up in the range, and the starting point if you want to add the LUBESMART Standard Pump later.\u003c\/p\u003e\n\u003cp\u003eEvery LUBESMART lid fits every LUBESMART jug, so you can standardise containers across the workshop and change spouts as jobs change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 5 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can see the level and measure the pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump-ready.\u003c\/strong\u003e The Utility Lid is the lid the LUBESMART Standard Pump is designed to pair with, so the jug can be upgraded to a hand pump later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean storage.\u003c\/strong\u003e Closes the jug between jobs to keep dirt and moisture out of the oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Give each oil its own colour to stop cross-contamination and operator mix-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide mouth.\u003c\/strong\u003e The 120 mm opening makes the jug quick to fill and easy to clean, and every LUBESMART lid fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67619021357135,"sku":"AF-LS-1005UT-BK","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67619021389903,"sku":"AF-LS-1005UT-GR","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67619021422671,"sku":"AF-LS-1005UT-GY","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67619021455439,"sku":"AF-LS-1005UT-LB","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67619021488207,"sku":"AF-LS-1005UT-OR","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67619021520975,"sku":"AF-LS-1005UT-PK","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67619021553743,"sku":"AF-LS-1005UT-RD","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67619021586511,"sku":"AF-LS-1005UT-WH","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67619021619279,"sku":"AF-LS-1005UT-YL","price":105.6,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67619021652047,"sku":"AF-LS-1005UT-DB","price":105.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1005ut-bk-5l-jug-with-black-utility-lid.webp?v=1791083466"},{"product_id":"5l-jug-with-utility-lid-and-pump","title":"AF-LS-1005P 5L Jug with Utility Lid \u0026 Pump","description":"\u003cp\u003eThis kit puts the LUBESMART Standard Pump on a 5 litre jug with a Utility Lid. It is made for top-up points that are slow or awkward to fill by pouring, such as gearboxes and transmissions.\u003c\/p\u003e\n\u003cp\u003eThe jug, lid and pump work together as one sealed, colour-coded unit, so each oil stays in its own container from storage to fill point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDown-stroke discharge pump.\u003c\/strong\u003e Delivers about 1 litre every 12 strokes and handles oils up to ISO 460 viscosity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 m (5 ft) removable hose.\u003c\/strong\u003e Ends in a hook-style aluminium anti-drip nozzle that fits fill holes of 1\/2\" and larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 5 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can check how much oil has gone in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. One colour per oil helps stop cross-contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents. A Pump Reducer Nozzle can be added to the outlet for fill holes smaller than 1\/2\".\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67619040231503,"sku":"AF-LS-1005P-BK","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67619040264271,"sku":"AF-LS-1005P-GR","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67619040297039,"sku":"AF-LS-1005P-GY","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67619040329807,"sku":"AF-LS-1005P-LB","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67619040362575,"sku":"AF-LS-1005P-OR","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67619040395343,"sku":"AF-LS-1005P-PK","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67619040428111,"sku":"AF-LS-1005P-RD","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67619040460879,"sku":"AF-LS-1005P-WH","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67619040493647,"sku":"AF-LS-1005P-YL","price":214.5,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67619040526415,"sku":"AF-LS-1005P-DB","price":214.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1005p-gr-5l-jug-with-green-utility-lid-and-pump.webp?v=1791084745"},{"product_id":"oil-jug-utility-lid","title":"AF-LS-100 Utility Lid","description":"\u003cp\u003eThe AF-LS-100 is the LUBESMART Utility Lid, the general-purpose lid for LUBESMART jugs and the one the LUBESMART Standard Pump is designed to pair with.\u003c\/p\u003e\n\u003cp\u003eBuy spare lids to change spout styles on jugs you already own, or to replace a worn or lost lid without replacing the jug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump-ready.\u003c\/strong\u003e The Utility Lid is the lid the LUBESMART Standard Pump is designed to pair with, so the jug can be upgraded to a hand pump later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean storage.\u003c\/strong\u003e Closes the jug between jobs to keep dirt and moisture out of the oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits every LUBESMART jug.\u003c\/strong\u003e Screws onto the 3, 5 and 10 litre jugs, so you can swap spouts as the job changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Match the lid colour to one oil and keep it on that oil.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67619142074447,"sku":"AF-LS-100BK","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67619142107215,"sku":"AF-LS-100GR","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67619142139983,"sku":"AF-LS-100GY","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67619142172751,"sku":"AF-LS-100LB","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67619142205519,"sku":"AF-LS-100OR","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67619142238287,"sku":"AF-LS-100PK","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67619142271055,"sku":"AF-LS-100RD","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67619142303823,"sku":"AF-LS-100WH","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67619142336591,"sku":"AF-LS-100YL","price":57.2,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67619142369359,"sku":"AF-LS-100DB","price":57.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-100lb-light-blue-utility-lid.webp?v=1791090903"},{"product_id":"stretch-spout-lid","title":"AF-LS-200 12mm Stretch Spout Lid","description":"\u003cp\u003eThe AF-LS-200 Stretch Spout lid has a 12 mm (1\/2\") outlet on an extended spout for precise pouring in hard-to-reach areas. It is the lid for fill points tucked behind guards, hoses and brackets.\u003c\/p\u003e\n\u003cp\u003eBuy spare lids to change spout styles on jugs you already own, or to replace a worn or lost lid without replacing the jug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 mm (1\/2\") outlet on an extended spout.\u003c\/strong\u003e Reaches fill points behind guards and brackets and gives a controlled pour of lower-viscosity oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto shut-off breather valve.\u003c\/strong\u003e Helps prevent accidental spills and keeps contaminants out while you dispense.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure fit.\u003c\/strong\u003e An advanced sealing thread locks the lid onto the jug, and the large handle makes it easy to carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits every LUBESMART jug.\u003c\/strong\u003e Screws onto the 3, 5 and 10 litre jugs, so you can swap spouts as the job changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Match the lid colour to one oil and keep it on that oil.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67623220314191,"sku":"AF-LS-200BK","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67623220346959,"sku":"AF-LS-200GR","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67623220379727,"sku":"AF-LS-200GY","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67623220412495,"sku":"AF-LS-200LB","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67623220445263,"sku":"AF-LS-200OR","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67623220478031,"sku":"AF-LS-200PK","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67623220510799,"sku":"AF-LS-200RD","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67623220543567,"sku":"AF-LS-200WH","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67623220576335,"sku":"AF-LS-200YL","price":79.2,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67623220609103,"sku":"AF-LS-200DB","price":79.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-200gy-grey-stretch-spout-lid.webp?v=1791256594"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/vendor-aflo-logo.webp?v=1793657125","url":"https:\/\/geelongfiltersales.com.au\/collections\/a-flo-equipment.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}