{"title":"Air Operated Grease Pumps","description":"\u003cp\u003eAir operated grease pumps are bare pumps built to sit in a grease pail or drum and deliver grease at high pressure to a gun, reel or lube line. Sold without hose or gun, they suit workshops, lube bays and service trucks building or upgrading their own setup. Container size and pump ratio are the two things to get right: the pump tube has to suit the pail or drum, and the ratio has to be high enough to push your grease through the hose length you're running. With too little pressure, fittings get half a shot and bearings run dry. Each pump also needs the follower plate and cover made for it. Start with your container and work from there.\u003c\/p\u003e","products":[{"product_id":"965124","title":"965124 Fire-Ball 425 Series 10:1 Stubby Grease Pump, 180 kg Drum","description":"\u003cp\u003eThe 965124 is the Fire-Ball 425 10:1 grease pump in stubby length, a low-pressure, medium-volume pump for transferring grease rather than dispensing it at the fitting. Graco rates it for non-corrosive and non-abrasive lubricants only. The \u003ca href=\"\/products\/205395\"\u003e205395\u003c\/a\u003e 50:1 on the same air motor reaches 517 bar for direct dispensing, while the 10:1 moves 164.7 g per cycle against 30 g. See the \u003ca href=\"\/collections\/ao-grease-pumps\"\u003eair-operated grease pump range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIn-line piston rods extend seal life, non-metallic poppet valves seal on dirty air, and nitrided, plated, stainless and chrome parts resist corrosion. Graco positions the Fire-Ball 425 for long pipe runs and several simultaneous dispenses, at 9,072 kg of grease a year or more.\u003c\/p\u003e\u003cp\u003eIt's supplied as the stubby pump only, for 180 kg drums. The manual's typical installation uses the \u003ca href=\"\/products\/200326\"\u003e200326\u003c\/a\u003e drum cover, 223701 follow plate and 241663 elevator.\u003c\/p\u003e\u003cp\u003eGraco requires a bleed-type master air valve to relieve air trapped in the pump, and a ground wire and clamp (\u003ca href=\"\/products\/222011\"\u003e222011\u003c\/a\u003e). An air regulator, air filter and air line oiler close to the inlet are recommended. The 1\" NPT female outlet needs an adapter on a BSP line. Parts shown without a link are available on request.\u003c\/p\u003e","brand":"Graco","offers":[{"title":"Default Title","offer_id":68172971278415,"sku":"965124","price":12012.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/graco-965124-fire-ball-425-series-10-1-stubby-grease-pump.jpg?v=1794951740"},{"product_id":"24g608","title":"24G608 LD Series 50:1 Grease Pump, 180 kg Drum, BSPT","description":"\u003cp\u003eThe 24G608 is the LD 50:1 grease pump in 180 kg drum length with BSPT ports, for grease up to NLGI #2. Graco rates LD pumps for non-corrosive, non-abrasive lubricants. It suits up to 3,175 kg a year; on the same drum, the \u003ca href=\"\/products\/239888\"\u003e239888\u003c\/a\u003e Fire-Ball 300 covers up to 4,535 kg with NPT ports. See the \u003ca href=\"\/collections\/ao-grease-pumps\"\u003eair-operated grease pump range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eA 76 mm air motor drives the lower, and the modular air valve re-orients with four bolts. Patented cup-and-plate seals remove the fastest-wearing O-rings, and pilot valves self-clean. Graco lists the LD 50:1 for dealerships, fast lube centres, service shops and lube trucks.\u003c\/p\u003e\u003cp\u003eIt's supplied as the pump only; a follower plate is required to draw from the drum. Graco's BSPT packages use the \u003ca href=\"\/products\/24f903\"\u003e24F903\u003c\/a\u003e follower plate, \u003ca href=\"\/products\/24f906\"\u003e24F906\u003c\/a\u003e cover, \u003ca href=\"\/products\/24h863\"\u003e24H863\u003c\/a\u003e hose kit and \u003ca href=\"\/products\/129583\"\u003e129583\u003c\/a\u003e LD Pro-Shot valve, and the mobile version adds the \u003ca href=\"\/products\/24f915\"\u003e24F915\u003c\/a\u003e cart. The \u003ca href=\"\/products\/xdh55f\"\u003eXDH55F grease reel\u003c\/a\u003e needs Graco's 218550 hose inlet kit, rated to 276 bar, so keep the air at 5.5 bar or less. The reel inlet needs an adapter from the BSPT outlet.\u003c\/p\u003e\u003cp\u003eGraco requires a bleed-type master air valve (125272 for BSP models), a regulator with relief valve (24H419 for BSP models) and a ground wire and clamp (\u003ca href=\"\/products\/222011\"\u003e222011\u003c\/a\u003e). It mounts on the drum cover with wing screws. Parts shown without a link are available on request.\u003c\/p\u003e","brand":"Graco","offers":[{"title":"Default Title","offer_id":68172971966543,"sku":"24G608","price":909.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/graco-24g608-ld-series-50-1-grease-pump-front.jpg?v=1794951740"},{"product_id":"239877","title":"239877 Fire-Ball 300 Series 50:1 Grease Pump, 16 kg or 32 kg Pail","description":"\u003cp\u003eThe 239877 is the Fire-Ball 300 50:1 grease pump in pail length, for 16 kg or 32 kg pails of grease up to NLGI #2. It is limited to non-corrosive, non-abrasive greases and lubricants. If you buy grease in 180 kg drums, the \u003ca href=\"\/products\/239888\"\u003e239888\u003c\/a\u003e is the same pump in drum length. Higher-volume Fire-Ball 425 pumps are in the \u003ca href=\"\/collections\/ao-grease-pumps\"\u003eair-operated grease pump range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIts differential air motor and double-acting lower give smooth flow and accurate dispensing, with output on both strokes. Non-metallic poppet valves hold a positive seal on dirty air, and Graco builds portable, cart and stationary pail packages around it.\u003c\/p\u003e\u003cp\u003eIt's supplied as the pump only, not as a kit. Graco's portable package for 11–16 kg pails adds the \u003ca href=\"\/products\/24f901\"\u003e24F901\u003c\/a\u003e follower plate, 222059 cover and a 3.7 m hose with a Pro-Shot valve (\u003ca href=\"\/products\/242056\"\u003e242056\u003c\/a\u003e); the 109075 regulator is ordered separately. The \u003ca href=\"\/products\/xdh55f\"\u003eXDH55F grease reel\u003c\/a\u003e needs Graco's 218550 hose inlet kit, rated to 276 bar, so with it the pump's air must stay at 5.5 bar or less.\u003c\/p\u003e\u003cp\u003eGraco requires a bleed-type master air valve close to the pump air inlet, a fluid drain valve, and a ground wire with its clamp (\u003ca href=\"\/products\/222011\"\u003e222011\u003c\/a\u003e). A runaway valve, air regulator, filter and lubricator are recommended. Secure the pump to the pail cover. Parts shown without a link are available on request.\u003c\/p\u003e","brand":"Graco","offers":[{"title":"Default Title","offer_id":68172994347087,"sku":"239877","price":2563.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/graco-239877-fire-ball-300-series-50-1-grease-pump.jpg?v=1794951740"},{"product_id":"239888","title":"239888 Fire-Ball 300 Series 50:1 Grease Pump, 180 kg Drum","description":"\u003cp\u003eThe 239888 is the Fire-Ball 300 50:1 grease pump in 180 kg drum length, for grease up to NLGI #2. Graco rates it for non-corrosive, non-abrasive greases and lubricants only. The \u003ca href=\"\/products\/239877\"\u003e239877\u003c\/a\u003e is the same pump for 16 kg or 32 kg pails. For long pipe runs or several dispense points, the \u003ca href=\"\/products\/205395\"\u003e205395\u003c\/a\u003e Fire-Ball 425 fits the same drum. See the \u003ca href=\"\/collections\/ao-grease-pumps\"\u003eair-operated grease pump range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eA differential air motor drives a double-acting lower that delivers on both strokes, for steady flow and accurate dispensing. Non-metallic poppet valves seal on dirty air. It's used in service shops, fleet facilities, lube trucks and mining.\u003c\/p\u003e\u003cp\u003eIt's supplied as the pump only. Graco's 180 kg stationary package adds the \u003ca href=\"\/products\/24f903\"\u003e24F903\u003c\/a\u003e follower plate, \u003ca href=\"\/products\/200326\"\u003e200326\u003c\/a\u003e drum cover and \u003ca href=\"\/products\/222072\"\u003e222072\u003c\/a\u003e hose kit, plus a separately ordered 109075 regulator. The \u003ca href=\"\/products\/xdh55f\"\u003eXDH55F 15 m grease reel\u003c\/a\u003e needs Graco's 218550 hose inlet kit, rated to 276 bar and well below this pump's maximum, so keep its air at 5.5 bar or less.\u003c\/p\u003e\u003cp\u003eGraco requires a bleed-type master air valve near the air inlet, a fluid drain valve to relieve pressure in the pump and hose, and a ground wire and clamp (\u003ca href=\"\/products\/222011\"\u003e222011\u003c\/a\u003e). A runaway valve, regulator with gauge, air filter and lubricator are recommended. Secure the pump to the drum cover so it cannot move. Parts shown without a link are available on request.\u003c\/p\u003e","brand":"Graco","offers":[{"title":"Default Title","offer_id":68172998443087,"sku":"239888","price":2885.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/graco-239888-fire-ball-300-series-50-1-grease-pump-front.jpg?v=1794951740"},{"product_id":"205395","title":"205395 Fire-Ball 425 Series 50:1 Grease Pump, 180 kg Drum","description":"\u003cp\u003eThe 205395 is the Fire-Ball 425 50:1 grease pump in 180 kg drum length, for grease up to NLGI #2, and it is for non-corrosive, non-abrasive greases and lubricants only. The \u003ca href=\"\/products\/205394\"\u003e205394\u003c\/a\u003e is the same pump for 55 kg drums. On this drum, the \u003ca href=\"\/products\/239888\"\u003e239888\u003c\/a\u003e Fire-Ball 300 suits up to 4,535 kg a year, against 9,072 kg or more for the 425. Both are in the \u003ca href=\"\/collections\/ao-grease-pumps\"\u003eair-operated grease pump range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe larger 108 mm air motor lets one pump feed long pipe runs and several dispense points at once. In-line piston rods extend seal life, and non-metallic poppet valves seal positively on dirty air. It's used in fleet facilities, in-plant, lube trucks and mining.\u003c\/p\u003e\u003cp\u003eIt's supplied as the pump only. Graco's stationary 180 kg package adds the \u003ca href=\"\/products\/200326\"\u003e200326\u003c\/a\u003e drum cover, 223846 follower plate and 222076 dispense kit. The \u003ca href=\"\/products\/xdh55f\"\u003eXDH55F grease reel\u003c\/a\u003e needs Graco's 218550 hose inlet kit, rated to 276 bar, so hold the pump's air at 5.5 bar or less with it.\u003c\/p\u003e\u003cp\u003eGraco requires a bleed-type master air valve, placed upstream of the air regulator, and a ground wire and clamp (\u003ca href=\"\/products\/222011\"\u003e222011\u003c\/a\u003e). A regulator, air filter and air line oiler are recommended. Fit the pump to the drum cover with the intake within 25 mm of the bottom. Parts shown without a link are available on request.\u003c\/p\u003e","brand":"Graco","offers":[{"title":"Default Title","offer_id":68173010894927,"sku":"205395","price":6641.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/graco-205395-fire-ball-425-series-50-1-grease-pump-front.jpg?v=1794951819"},{"product_id":"205394","title":"205394 Fire-Ball 425 Series 50:1 Grease Pump, 55 kg Drum","description":"\u003cp\u003eThe 205394 is the Fire-Ball 425 50:1 grease pump in 55 kg drum length, for grease up to NLGI #2. Graco rates it for non-corrosive and non-abrasive greases and lubricants only. The \u003ca href=\"\/products\/205395\"\u003e205395\u003c\/a\u003e is the same pump for 180 kg drums, so choose by drum size. Lower-volume pumps are in the \u003ca href=\"\/collections\/ao-grease-pumps\"\u003eair-operated grease pump range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIts 108 mm air motor supplies the power for long pipe runs and several dispense points working at once. The in-line design aligns the piston rods to extend seal life, non-metallic poppet valves keep sealing on dirty air, and key parts resist corrosion. Typical sites are fleet workshops, lube trucks and mining.\u003c\/p\u003e\u003cp\u003eIt's supplied as the pump only. Graco's 55 kg stationary package adds the 204574 drum cover, 223344 follower plate and 222076 dispense kit. The \u003ca href=\"\/products\/xdh55f\"\u003eXDH55F 15 m grease reel\u003c\/a\u003e needs Graco's 218550 hose inlet kit, rated to 276 bar, so regulate the pump's air to 5.5 bar or less when they are paired.\u003c\/p\u003e\u003cp\u003eGraco requires a bleed-type master air valve within reach of the pump, upstream of the regulator, and a ground wire and clamp (\u003ca href=\"\/products\/222011\"\u003e222011\u003c\/a\u003e). An air regulator, filter and air line oiler are recommended. Mount the pump on the drum cover with the intake no more than 25 mm from the drum floor. Parts shown without a link are available on request.\u003c\/p\u003e","brand":"Graco","offers":[{"title":"Default Title","offer_id":68173011025999,"sku":"205394","price":6641.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/graco-205394-fire-ball-425-series-50-1-grease-pump-front.jpg?v=1794951819"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/24G578.webp?v=1781693252","url":"https:\/\/geelongfiltersales.com.au\/collections\/ao-grease-pumps.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}