{"title":"Automatic \u0026 CVT Transmission Fluid","description":"\u003cp\u003eAutomatic transmission fluid and CVT fluid for cars, 4WDs, SUVs and light commercials. Modern automatics are built around a specific fluid, with friction characteristics matched to the clutch packs and torque converter lock-up, so carmakers publish their own specs, such as Dexron, Mercon or an OEM-specific approval code. CVTs need their own fluid again, designed for the steel belt or chain running on the pulleys.\u003c\/p\u003e\u003cp\u003eRead the spec from the handbook or dipstick rather than guessing from the vehicle's age or country of origin, and treat CVTs as a separate job. The wrong friction profile shows up as shudder, flare, slip or harsh shifts, and in a CVT it can end in a belt and pulley replacement. The guide below explains multi-vehicle fluids and fluid changes.\u003c\/p\u003e","products":[{"product_id":"1129-04","title":"1129.04 MaxLife Multi-Vehicle, Synthetic Automatic Transmission Fluid 4L","description":"\u003cp\u003eValvoline MaxLife Multi-Vehicle ATF is a synthetic automatic transmission fluid built to cover a wide range of OEM specifications in one fluid, with seal conditioners aimed at higher-mileage transmissions to help control leaks and hold shift quality. It carries an extensive list of manufacturer approvals across Asian, European and American automatics. The 4L pack suits a single transmission service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne ATF for a wide range of automatics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe value of a multi-vehicle ATF is breadth: one fluid that can service Asian, European and American automatics which would otherwise each need their own. This synthetic fluid covers a wide range of OEM specifications and adds seal conditioners aimed at higher-mileage transmissions, to help control leaks and hold shift quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt with higher-mileage transmissions in mind\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs a transmission ages, its seals harden and can start to leak, and shift quality drifts. The seal conditioners in MaxLife are designed to keep those seals pliable to help control leaks and hold shift quality, which is exactly what a higher-mileage automatic needs. The synthetic base gives stable friction and thermal durability across the mix of transmissions it covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtensive approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a long list of manufacturer approvals across Toyota, Honda, Nissan, Ford, GM, Mercedes-Benz, ZF and many more, which is what lets it serve a mixed workshop from one fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops and owners servicing higher-mileage automatics across mixed brands. Confirm the fluid your transmission specifies is on the approvals list before use, since some transmissions require a dedicated fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing a multi-vehicle ATF correctly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA multi-vehicle fluid covers a wide range of automatics, but always confirm your transmission's specification is on the approvals list before use, since some transmissions, particularly certain CVTs and dual-clutch units, require a dedicated fluid and must not be filled with a general ATF. Follow the maker's service interval, and change the fluid sooner where the transmission works hard, tows or runs hot, since heat is what ages ATF. The seal conditioners help control leaks and hold shift quality in higher-mileage units, but a slipping or overheating transmission may need mechanical attention as well as fresh fluid. Top up and refill with the correct fluid at the level specified for the transmission.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478507675727,"sku":"1129.04","price":47.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1129-04-maxlife-multi-vehicle-synthetic-transmission-oil-4l.webp?v=1785300660"},{"product_id":"1129-20","title":"1129.20 MaxLife Multi-Vehicle, Synthetic Automatic Transmission Fluid 20L","description":"\u003cp\u003eValvoline MaxLife Multi-Vehicle ATF is a synthetic automatic transmission fluid covering a wide range of OEM specifications in one fluid, with seal conditioners for higher-mileage transmissions to help control leaks and maintain shift quality. Its broad approvals span Asian, European and American automatics. The 20L pack is the practical workshop choice for servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne ATF for a wide range of automatics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe value of a multi-vehicle ATF is breadth: one fluid that can service Asian, European and American automatics which would otherwise each need their own. This synthetic fluid covers a wide range of OEM specifications and adds seal conditioners aimed at higher-mileage transmissions, to help control leaks and hold shift quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt with higher-mileage transmissions in mind\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs a transmission ages, its seals harden and can start to leak, and shift quality drifts. The seal conditioners in MaxLife are designed to keep those seals pliable to help control leaks and hold shift quality, which is exactly what a higher-mileage automatic needs. The synthetic base gives stable friction and thermal durability across the mix of transmissions it covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtensive approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a long list of manufacturer approvals across Toyota, Honda, Nissan, Ford, GM, Mercedes-Benz, ZF and many more, which is what lets it serve a mixed workshop from one fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops and owners servicing higher-mileage automatics across mixed brands. Confirm the fluid your transmission specifies is on the approvals list before use, since some transmissions require a dedicated fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing a multi-vehicle ATF correctly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA multi-vehicle fluid covers a wide range of automatics, but always confirm your transmission's specification is on the approvals list before use, since some transmissions, particularly certain CVTs and dual-clutch units, require a dedicated fluid and must not be filled with a general ATF. Follow the maker's service interval, and change the fluid sooner where the transmission works hard, tows or runs hot, since heat is what ages ATF. The seal conditioners help control leaks and hold shift quality in higher-mileage units, but a slipping or overheating transmission may need mechanical attention as well as fresh fluid. Top up and refill with the correct fluid at the level specified for the transmission.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478514262095,"sku":"1129.20","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1129-20-maxlife-multi-vehicle-synthetic-transmission-oil-20l.webp?v=1785300661"},{"product_id":"1215-04","title":"1215.04 Dexron III, Mineral Automatic Transmission Fluid 4L","description":"\u003cp\u003eValvoline Dexron III ATF is a mineral automatic transmission fluid for older automatics, power steering systems and hydraulic applications that call for a Dexron III or Mercon fluid. It delivers the friction and viscosity those units were designed around, for smooth shifts and reliable service. The 4L pack suits a single transmission or power steering service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right fluid for older automatics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder automatics were designed around a particular friction and viscosity, and giving them exactly that is what keeps shifts smooth and the transmission reliable. This mineral ATF delivers the friction and viscosity a Dexron III or Mercon system was built around, and the same properties suit many power steering and hydraulic uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched friction and viscosity\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn automatic transmission relies on the fluid to transmit power through the torque converter and to engage clutches with the right feel, both of which depend on the fluid's friction characteristics. Dexron III ATF provides the friction and viscosity older automatics were built around, so shifts stay smooth and the transmission works as intended. The same properties suit many power steering and hydraulic uses that specify this fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad older-vehicle coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Dexron IIIH, Ford Mercon and Allison C4, covering a wide range of older automatics and power steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older automatic transmissions and power steering systems specifying Dexron III or Mercon. Where a vehicle requires a newer fluid such as Dexron VI, use that instead, and confirm the specification before service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing the correct ATF\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDexron III is the right fluid for older automatics and many power steering systems that specify it, but modern transmissions that call for Dexron VI or a dedicated fluid should use those instead, so confirm the specification before filling. Follow the maker's service interval, and change sooner where the transmission tows or runs hot, since heat ages the fluid and degrades shift quality. Check and set the level correctly, usually with the transmission warm and running per the maker's method, since both overfilling and underfilling cause problems. In the older automatics and power steering systems it suits, the matched friction and viscosity are what keep operation smooth and the components protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478605389903,"sku":"1215.04","price":39.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1215-04-dexron-iii-transmission-oil-4l.webp?v=1785300669"},{"product_id":"1215-20","title":"1215.20 Dexron III, Mineral Automatic Transmission Fluid 20L","description":"\u003cp\u003eValvoline Dexron III ATF is a mineral automatic transmission fluid for older automatics, power steering and hydraulic uses calling for a Dexron III or Mercon fluid, giving the friction and viscosity those units were built around. The 20L pack is the practical workshop choice for servicing multiple vehicles and topping up power steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right fluid for older automatics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder automatics were designed around a particular friction and viscosity, and giving them exactly that is what keeps shifts smooth and the transmission reliable. This mineral ATF delivers the friction and viscosity a Dexron III or Mercon system was built around, and the same properties suit many power steering and hydraulic uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched friction and viscosity\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn automatic transmission relies on the fluid to transmit power through the torque converter and to engage clutches with the right feel, both of which depend on the fluid's friction characteristics. Dexron III ATF provides the friction and viscosity older automatics were built around, so shifts stay smooth and the transmission works as intended. The same properties suit many power steering and hydraulic uses that specify this fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad older-vehicle coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Dexron IIIH, Ford Mercon and Allison C4, covering a wide range of older automatics and power steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older automatic transmissions and power steering systems specifying Dexron III or Mercon. Where a vehicle requires a newer fluid such as Dexron VI, use that instead, and confirm the specification before service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing the correct ATF\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDexron III is the right fluid for older automatics and many power steering systems that specify it, but modern transmissions that call for Dexron VI or a dedicated fluid should use those instead, so confirm the specification before filling. Follow the maker's service interval, and change sooner where the transmission tows or runs hot, since heat ages the fluid and degrades shift quality. Check and set the level correctly, usually with the transmission warm and running per the maker's method, since both overfilling and underfilling cause problems. In the older automatics and power steering systems it suits, the matched friction and viscosity are what keep operation smooth and the components protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478612303951,"sku":"1215.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1215-20-dexron-iii-transmission-oil-20l.webp?v=1785300670"},{"product_id":"1272-20","title":"1272.20 Dexron VI, Synthetic Automatic Transmisison Fluid 20L","description":"\u003cp\u003eValvoline Dexron VI ATF is a fully synthetic, GM-approved automatic transmission fluid for modern GM automatics, and it is backwards compatible with Dexron II and III applications. Its synthetic base delivers stable friction, thermal durability and long service life for consistent shift quality under load and heat. Supplied in a 20L pack for workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA GM-approved synthetic ATF\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModern GM automatics run more gears, higher temperatures and longer service intervals than the units older fluids served, and Dexron VI is the tighter specification written for them. This fully synthetic, GM-approved fluid delivers that, and its backward compatibility means it also refreshes older Dexron II and III transmissions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStable friction and long life\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModern automatics run more gears, higher temperatures and longer service intervals than the units Dexron III served, and Dexron VI is specified to hold its friction and viscosity through that harder service. The synthetic base delivers the thermal durability and shear stability needed for consistent shift quality over a long drain, and its backward compatibility means it can also refresh older Dexron II and III transmissions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved and compatible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is officially GM Dexron VI approved and covers Dexron II, III and VI applications, so it suits both modern and older GM automatics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing modern GM automatics and earlier Dexron transmissions. Confirm your transmission specifies a Dexron VI or compatible fluid before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing a Dexron VI fluid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDexron VI is a licensed GM specification and is backwards compatible with Dexron II and III, so it can serve both modern GM automatics and older units, but confirm your transmission specifies a Dexron VI or compatible fluid before filling rather than assuming. Follow the maker's service interval, and change sooner where the transmission works hard, tows or runs hot. Check and set the fluid level by the maker's method, typically warm and running, since level errors cause shift and overheating problems. The synthetic base holds its friction and viscosity through long, hot service, which is what maintains consistent shift quality in the modern automatics Dexron VI was written for.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478692421711,"sku":"1272.20","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1272-20-dexron-vi-synthetic-transmission-oil-20l.webp?v=1785300685"},{"product_id":"1415-20","title":"1415.20 Syngard ES Synthetic Automatic Transmission Fluid 20L","description":"\u003cp\u003eValvoline Syn Gard ATF ES is a synthetic automatic transmission fluid for heavy-duty automatic transmissions in modern trucks, buses and utility vehicles. It is built from premium synthetic base stocks with long-life friction modifiers, anti-wear additives and shear stable viscosity modifiers for thermal protection, low temperature flow, wear protection and shear stability. The 20L pack suits workshops and fleets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAllison TES-295: formulated for, not approved\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eValvoline recommends Syn Gard ATF ES for vehicles requiring Allison TES-295 fluids, but states that it is not approved by Allison for that specification. If the transmission warranty or a fleet contract requires an Allison-approved fluid, use \u003ca href=\"\/products\/1448-20\"\u003eSyn Gard 668 ATF\u003c\/a\u003e instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals and specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproved:\u003c\/strong\u003e Voith H55.6336.33 (G1363), with a 120,000 km drain interval, and ZF TE-ML 03D, 04D, 14B, 17C, 20B and 25B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed:\u003c\/strong\u003e Allison TES 295 (not Allison approved), Allison C-4, Dexron IIIH and IIIG, Mercon V, MAN 339 F, V1, V2, Z1 and Z2, DTFR 13C170 (formerly MB 236.9), Volvo 97341, Voith H55.6335.33 (G607) and John Deere articulated dump trucks (ADTs).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the owner's manual before use. Valvoline notes it may be unsuitable for some transmissions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy synthetic\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFights heat, deposits and wear, the three major causes of transmission failure.\u003c\/li\u003e\n\u003cli\u003eFlows well at low temperatures for smooth power transfer and gear changes on cold starts.\u003c\/li\u003e\n\u003cli\u003eKeeps shifts smooth for longer than conventional automatic fluids.\u003c\/li\u003e\n\u003cli\u003eReduces varnish and wear for longer transmission life.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical properties\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eViscosity 7.4 mm²\/s at 100°C and 35 mm²\/s at 40°C, viscosity index 185, Brookfield 10,500 cP at -40°C, pour point -48°C, flash point 220°C. Red.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479100088399,"sku":"1415.20","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1415-20-syngard-atf-es-transmission-fluid-20l.webp?v=1785300719"},{"product_id":"1448-20","title":"1448.20 Syn Gard 668 Synthetic Automatic Transmission Fluid 20L","description":"\u003cp\u003eValvoline Syn Gard 668 is a fully synthetic automatic transmission fluid that is Allison TES-668 approved and backwards compatible with TES-295, TES-389 and TES-468 applications, including the Allison 1000 to 4000 series. Its premium synthetic base extends drain intervals and holds shift quality under heavy-duty heat and load. Supplied in a 20L pack for fleet workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn Allison TES-668 synthetic ATF\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAllison automatics in trucks, buses and equipment run under high load and heat for long intervals, and using a licensed fluid gives them the exact properties they were designed around. This fully synthetic fluid is Allison TES-668 approved and backwards compatible with TES-295, TES-389 and TES-468, so one fluid serves a range of Allison units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for heavy-duty Allison service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAllison automatics in trucks, buses and equipment run under high load and heat for long intervals, and the synthetic base of Syn Gard 668 holds its friction and viscosity through that service to maintain shift quality and support extended drains. Its backward compatibility means it also covers earlier Allison specifications, so one fluid serves a range of Allison units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved and compatible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is Allison TES-668 approved and covers TES-295, TES-389 and TES-468 applications across the Allison 1000 to 4000 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing Allison automatic transmissions in trucks, buses and equipment. Confirm your transmission's Allison fluid specification before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAllison service and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSyn Gard 668 meets Allison's latest TES-668 specification and is backwards compatible with TES-295, TES-389 and TES-468, so it covers a range of Allison units, but confirm your transmission's required specification before filling. Follow Allison's service interval, which the synthetic base helps extend, and change sooner under severe duty or high heat. Set the fluid level by the maker's method, warm and running, since level errors cause shift and overheating problems on these transmissions. The synthetic base holds its friction and viscosity through the high loads and long intervals Allison automatics run in trucks, buses and equipment, which is what maintains shift quality over a long service life.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479924105295,"sku":"1448.20","price":389.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1448-20-syn-gard-atf-668-transmission-fluid-20l.webp?v=1785301051"},{"product_id":"1330-05","title":"1330.05 SynPower CVT Synthetic Transmission Fluid 5L","description":"\u003cp\u003eValvoline SynPower CVT is a premium full synthetic, multi-vehicle continuously variable transmission fluid for passenger cars and vans using belt and chain-driven CVTs. It is engineered to maintain the precise friction a CVT needs to prevent belt slip, shudder and overheating, protecting the transmission across a wide range of makes. Supplied in a 5L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA dedicated fluid for continuously variable transmissions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA CVT transfers drive through a steel belt or chain running between variable pulleys, and it depends on a very specific friction level to grip without slipping. This premium full synthetic, multi-vehicle CVT fluid is engineered to deliver and hold that precise friction, keeping belt and chain-driven transmissions smooth, cool and protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CVT fluid is different\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA CVT transfers drive through a steel belt or chain running between variable pulleys, and it depends on a very specific friction level to grip without slipping. Too little friction and the belt slips and wears; the wrong friction character and the transmission can shudder or overheat. SynPower CVT is engineered to deliver and hold that precise friction, keeping the transmission smooth, cool and protected across a wide range of makes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMulti-vehicle coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt covers a broad list of belt and chain CVT specifications from Japanese, Korean and European makers, which lets one fluid serve many CVT applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits passenger-car and van CVTs. Because CVT fluids are matched closely to the transmission, confirm your vehicle's CVT fluid specification is covered before use, and do not substitute a conventional ATF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CVT fluid is not interchangeable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA CVT depends on a very specific fluid to grip its belt or chain without slipping, so a CVT fluid must never be replaced with a conventional ATF, and even among CVT fluids you should confirm your vehicle's specification is covered before filling. Follow the maker's service interval, and change sooner where the transmission runs hot or works hard, since a CVT is sensitive to fluid condition and heat. A shudder, flare or hot-running CVT often traces back to worn or incorrect fluid, which a correct, fresh fill addresses. Set the level precisely by the maker's method, as a CVT is particularly intolerant of an incorrect fluid level.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45482351427663,"sku":"1330.05","price":87.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1330-05-synpower-cvt-synthetic-transmission-fluid-5l.webp?v=1785301290"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/Automatic-Transmission-Fluid_Subcategory-Image.webp?v=1781693277","url":"https:\/\/geelongfiltersales.com.au\/collections\/atf.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}