{"title":"Bluequip","description":"\u003cp\u003eBluequip is A-FLO's dedicated AdBlue equipment range, built for storing, transferring and dispensing AdBlue (DEF) and nothing else. Wetted parts are chosen for compatibility with ISO 22241, the standard for AdBlue quality and handling. The brand is known for hand and drum pumps, 240V, 12V\/24V and air operated pump kits, IBC dispensing kits, Genius automatic nozzles, Polycube AdBlue ute tanks and reel kits. Transport yards, farms, workshops and anyone running SCR diesel engines use it to keep fluid clean from the IBC to the vehicle. Power source and metering are the choices that matter most. Get the materials wrong and the bill lands in the SCR system, not the pump. The guide below explains how to match a setup to your site.\u003c\/p\u003e","products":[{"product_id":"af-fp-101320","title":"AF-FP-101320 Pro 240V AdBlue Transfer Kit for IBC, Auto Nozzle \u0026 Digital Flow Meter","description":"\u003cp\u003eDispensing AdBlue from a 1000 L IBC with a make-do setup is slow, messy and impossible to track. The Bluequip AF-FP-101320 Pro kit turns that into a proper metered dispensing point, built around a self-priming 240V pump on a stainless-steel IBC bracket.\u003c\/p\u003e\n\u003cp\u003eThe pump is a self-priming 240V unit rated at 35 lpm, mounted on a stainless-steel IBC bracket that holds the whole setup stable and supported rather than hanging off zip ties and bent brackets. A bottom suction kit draws the IBC down reliably, which keeps flow consistent and avoids the mid-fill stalls a poor pickup causes.\u003c\/p\u003e\n\u003cp\u003eWhat makes it the Pro kit is control. An automatic shut-off nozzle helps prevent overfills, and a K24 digital flow meter shows exactly what goes into each tank, which turns AdBlue from a vague consumable into a measured input you can track for cost, jobs and waste. It ships with a 6 m by 3\/4in hose, long enough to reach from the IBC to most fill points without dragging the unit around.\u003c\/p\u003e\n\u003cp\u003eFluid rated for AdBlue\/DEF. It is built for SCR-equipped fleets, farm machinery and multi-asset sites dispensing AdBlue, and its stainless bracket and AdBlue-compatible path keep the setup clean. It is an AdBlue kit and is not for diesel or oils.\u003c\/p\u003e\n\u003cp\u003eIt runs on 240V mains, so it is a fixed workshop or shed dispensing point rather than a vehicle-powered unit, and it mounts to a standard 1000 L IBC. Site it within reach of a 240V supply and position the IBC so the 6 m hose covers your fill points.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":45482913529935,"sku":"AF-FP-101320","price":2627.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-101320-pro-240v-adblue-transfer-kit-for-ibc.webp?v=1785301351"},{"product_id":"af-ae-pax70adb","title":"AF-AE-PAX70ADB Stainless Steel Automatic Shut-Off Nozzle, 60 lpm","description":"\u003cp\u003eOn AdBlue, the nozzle is either part of a clean, controlled fill or the reason there is crystallised mess on the floor and a tank that still is not full. The Bluequip AF-AE-PAX70ADB is an automatic stainless-steel AdBlue nozzle built for fast, reliable, shut-off-controlled dispensing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note: for AdBlue pump systems only. Not suitable for gravity-fed installations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt shuts off automatically when the tank is full, which prevents overfill, waste and clean-up and gives a consistent result no matter who is on the handle across a fleet. A 3-position stay-open latch lets you set a flow and let the nozzle work on larger tanks, or feather it for smaller ones and awkward filler angles.\u003c\/p\u003e\n\u003cp\u003eAt a maximum flow of 60 lpm it suits typical AdBlue pump kits, moving fluid efficiently without losing control. The stainless-steel body and spout are matched to AdBlue\/DEF and water, and a plastic handguard gives comfortable, secure handling for the steady aim AdBlue needs. It comes with a 3\/4in swivelling hose tail that cuts hose twist and operator fatigue on longer delivery hoses.\u003c\/p\u003e\n\u003cp\u003eFluid rated for AdBlue\/DEF and water. It connects to an AdBlue pump system through the 3\/4in swivel hose tail and is a proven upgrade for workshop, on-farm IBC and service-vehicle pump setups. For filler necks that use a magnetic key, the AF-AE-PAX70ADBM adds a magnetic tip to reduce mis-filling.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":45482916773967,"sku":"AF-AE-PAX70ADB","price":682.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-ae-pax70adb-stainless-steel-automatic-shut-off-nozzle.webp?v=1793486631"},{"product_id":"af-ae-pax70adbm","title":"AF-AE-PAX70ADBM Stainless Steel Automatic Shut-Off Nozzle with Magnet,  60 lpm","description":"\u003cp\u003eTruck AdBlue filler necks that use a magnetic key will not admit fluid without it, and a standard nozzle just leaves you locked out. The Bluequip AF-AE-PAX70ADBM is an automatic stainless-steel AdBlue nozzle with a magnetic tip built for exactly those systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note: for AdBlue pump systems only. Not suitable for gravity-fed installations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe magnetic tip suits compatible AdBlue filler necks that use a magnetic key to admit fluid, which is what reduces the risk of mis-filling AdBlue into the wrong tank on SCR trucks. It shuts off automatically when the tank is full, so a fill stays clean and controlled from pump-fed AdBlue systems.\u003c\/p\u003e\n\u003cp\u003eAt a maximum flow of 60 lpm it keeps fleet and farm top-ups quick without turning each one into a time sink. The stainless-steel body and spout are matched to urea (AdBlue\/DEF) and water, and a plastic handguard holds up to gloves, cold mornings and long service days. A 3-position stay-open latch lets you set a steady flow or feather the trigger for smaller tanks, and a 3\/4in hose barb swivel keeps hookup simple and cuts hose twist.\u003c\/p\u003e\n\u003cp\u003eFluid rated for AdBlue\/DEF and water. It fits workshop dispense points, mobile pump kits and tank or IBC AdBlue setups servicing trucks, utes, ag gear, earthmoving equipment and generators running SCR, and it is a common fit on Bluequip AdBlue pump kits. Where your filler necks do not need a magnetic key, the standard AF-AE-PAX70ADB is the non-magnetic version.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":45482917494863,"sku":"AF-AE-PAX70ADBM","price":841.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-ae-pax70adbm-stainless-steel-adblue-auto-nozzle-magnet.webp?v=1785301350"},{"product_id":"af-fc-100lab","title":"AF-FC-100LAB 100L Slimline AdBlue Polycube with 12V Pump Kit","description":"\u003cp\u003eOn modern diesel equipment with SCR, running out of AdBlue is not an inconvenience, it is a machine that will not make full power or stay compliant. The Bluequip AF-FC-100LAB keeps DEF on the ute and ready to dispense, a 100 L slimline AdBlue Polycube for mobile SCR refills.\u003c\/p\u003e\n\u003cp\u003eThe tank is reinforced polyethylene with increased wall thickness, and the reinforced construction resists the UV exposure and chemical corrosion that come with AdBlue storage, so it stands up to agricultural, construction and fleet use. The slimline cube design maximises tray space at 800 by 680 by 465 mm and 30 kg empty, fitting a mobile service setup without taking the cargo room.\u003c\/p\u003e\n\u003cp\u003eA premium 12V electric pump delivers up to 30 lpm, refilling SCR tanks quickly and cleanly off the vehicle battery, with battery cables and clips for a quick connection. The kit includes a 6 m by 3\/4in AdBlue delivery hose and a manual nozzle for the reach and control to fill vehicles safely.\u003c\/p\u003e\n\u003cp\u003eFluid rated for AdBlue\/DEF only. A built-in splash-proof breather and lockable lid protect DEF purity from dust and moisture and guard against spills in transport, which matters because contaminated AdBlue is what damages expensive SCR components. It is an AdBlue tank and is not for diesel.\u003c\/p\u003e\n\u003cp\u003eIt keeps SCR-equipped tractors, trucks and excavators topped up with DEF in the field.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you mount it in the tray and clip the pump to the battery. Where you need more DEF between fills, the 200 L and 440 L slimline and 400 L stumpy versions run the same 12V kit, so size the tank to your fleet's AdBlue use.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":45483224760399,"sku":"AF-FC-100LAB","price":2506.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fc-100lab-100l-slimline-adblue-polycube.jpg?v=1793486664"},{"product_id":"af-fc-200lab","title":"AF-FC-200LAB 200L Slimline AdBlue Polycube with 12V Pump Kit","description":"\u003cp\u003eKeeping a fleet's SCR machines topped up between depot visits is where AdBlue capacity starts to matter, and 200 L on the ute covers a lot of ground. The Bluequip AF-FC-200LAB carries and dispenses DEF from a service vehicle, a 200 L slimline AdBlue Polycube for fleet top-ups.\u003c\/p\u003e\n\u003cp\u003eBuilt from reinforced polyethylene with increased wall thickness, the slimline tank stands up to harsh Australian conditions while its compact footprint of 1150 by 820 by 565 mm and 39 kg empty sits neatly in most utility trays. It is the step up from 100 L for operators covering more machines between fills.\u003c\/p\u003e\n\u003cp\u003eA premium 12V transfer pump delivers up to 30 lpm, refilling AdBlue tanks quickly to cut downtime, and connects to the vehicle battery with the supplied cables and clips for instant on-site dispensing. A 6 m by 3\/4in AdBlue hose and manual nozzle give the reach to fill without constantly repositioning the vehicle, and an optional flow meter can be fitted where you want to monitor AdBlue use across a fleet.\u003c\/p\u003e\n\u003cp\u003eFluid rated for AdBlue\/DEF only. A built-in splash-proof breather and lockable lid keep DEF clean and secure in transport, protecting the SCR systems it feeds. It is an AdBlue tank and is not for diesel.\u003c\/p\u003e\n\u003cp\u003eIt supplies AdBlue to SCR trucks, tractors and earthmoving equipment across a fleet.\u003c\/p\u003e\n\u003cp\u003eTo fit it you tray-mount it and clip to the battery. Where 200 L is short, the 440 L and 400 L versions carry more, and the 100 L is the compact option, so size the tank to your AdBlue demand.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":45483230134351,"sku":"AF-FC-200LAB","price":2902.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fc-200lab-200l-slimline-adblue-polycube.webp?v=1785301432"},{"product_id":"af-fc-400lab","title":"AF-FC-400LAB 400L Stumpy AdBlue Polycube with 12V Pump Kit","description":"\u003cp\u003eMore AdBlue on board means fewer refills and less risk of an SCR machine going short mid-shift, and the stumpy 400 L profile packs that volume into a manageable tray footprint. The Bluequip AF-FC-400LAB packs serious mobile DEF supply into a manageable footprint, a 400 L AdBlue Polycube on a stumpy profile.\u003c\/p\u003e\n\u003cp\u003eThe stumpy profile is the point: at 1150 by 820 by 780 mm and 45 kg empty, it maximises usable capacity while keeping dimensions workable for vehicle mounting. Reinforced polycube construction with increased wall thickness gives it structural strength against the vibration and rough conditions of ute trays and service vehicles.\u003c\/p\u003e\n\u003cp\u003eA premium 12V transfer pump delivers up to 30 lpm, and the system ships with battery cables and clips, a 6 m by 3\/4in AdBlue hose and a manual nozzle, so it is ready to dispense straight out of the box. An optional flow meter is available where you want to track AdBlue usage.\u003c\/p\u003e\n\u003cp\u003eFluid rated for AdBlue\/DEF only. A lockable lid and integrated splash-proof breather protect AdBlue from contamination and reduce spills, keeping the fluid pure for the SCR systems that depend on it. It is an AdBlue tank and is not for diesel.\u003c\/p\u003e\n\u003cp\u003eIt keeps a fleet of SCR trucks, tractors, loaders and generators supplied with DEF.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you mount it in the tray and clip the pump to the battery. Where you want a taller, slimmer footprint at higher capacity, the 440 L slimline holds more, and the 200 L and 100 L slimlines step down, so match the tank to your AdBlue use and tray shape.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":45483236491343,"sku":"AF-FC-400LAB","price":3870.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fc-400lab-400l-stumpy-adblue-polycube.webp?v=1785301434"},{"product_id":"af-fc-440lab","title":"AF-FC-440LAB 440L Slimline AdBlue Polycube with 12V Pump Kit","description":"\u003cp\u003eFor a busy fleet, the most AdBlue you can carry on a slim footprint is what keeps SCR machines fed with the fewest refills. The Bluequip AF-FC-440LAB is the 440 L slimline AdBlue Polycube, the highest capacity in the range on a tray-friendly profile.\u003c\/p\u003e\n\u003cp\u003eAt 440 L it offers substantial storage while a slim 1700 by 880 by 740 mm footprint at 65 kg empty fits neatly against the headboard of a tray or service vehicle. The rotationally moulded poly construction with increased wall thickness gives structural strength and long service life in harsh Australian working conditions.\u003c\/p\u003e\n\u003cp\u003eA premium 12V AdBlue pump delivers up to 30 lpm for fast, controlled refuelling of SCR machinery, connecting directly to the vehicle battery through supplied cables and clips with no plumbing to run. A 6 m by 3\/4in AdBlue hose and manual nozzle give plenty of reach for trucks, tractors, loaders and generators, and an optional flow meter is available for accurate fluid monitoring.\u003c\/p\u003e\n\u003cp\u003eFluid rated for AdBlue\/DEF only. A built-in splash-proof breather allows proper ventilation while preventing contamination, and a lockable lid protects the AdBlue supply from tampering or theft. It is an AdBlue tank and is not for diesel.\u003c\/p\u003e\n\u003cp\u003eIt feeds DEF to SCR trucks, tractors, loaders and generators across a busy operation.\u003c\/p\u003e\n\u003cp\u003eTo fit it you tray-mount it and clip to the battery. Where its 65 kg empty weight and length are more than you need, the 400 L stumpy and 200 L and 100 L slimline versions step down, so match the tank to your AdBlue demand and vehicle.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":45483245011023,"sku":"AF-FC-440LAB","price":3907.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fc-440lab-440l-slimline-adblue-polycube.webp?v=1785301435"},{"product_id":"af-fp-3322a50","title":"AF-FP-3322A50 Bluequip Heavy Duty Stainless Steel AdBlue Hand Pump Kit, 38 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Dedicated to AdBlue (DEF). Using the pump for diesel, oil or other fluids will contaminate any AdBlue it pumps afterwards. A-FLO does not publish the drum bung thread, so confirm it suits your container before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e38 lpm, by hand, in stainless steel. That combination puts this pump between a slow plastic drum pump and a powered transfer kit: fast enough to fill a truck's AdBlue tank without a long wait, with no power supply or air line needed at the drum.\u003c\/p\u003e\n\u003cp\u003eThe outcome is a pump that primes itself and dispenses immediately, at up to 38 lpm. Its stainless steel build uses materials A-FLO states are fully compatible with AdBlue, and its close manufacturing tolerances and wear-resistant materials are what A-FLO relies on for long service in daily use. The pump is made in Italy.\u003c\/p\u003e\n\u003cp\u003eIt suits sites dispensing AdBlue from drums where volumes justify a faster, longer-lived pump than a polypropylene hand pump, but not yet a 240V system.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids. Connection: the drum bung thread and adaptor standard are not published, so check your drum's bung before ordering. No standard such as ISO 22241 is cited for the pump.\u003c\/p\u003e\n\u003cp\u003eThe kit is supplied complete with a suction tube, delivery hose and nozzle, ready to fit to the drum. The drum and AdBlue are not included, and no power or air supply is required.\u003c\/p\u003e\n\u003cp\u003eFor one- or two-vehicle operations where cost matters more than flow, the AF-FP-332080 Bluequip rotary drum pump kit is the polypropylene alternative. Where AdBlue comes in 1000L IBCs, the AF-FP-101320 Pro 240V AdBlue transfer kit adds an automatic nozzle and digital flow meter.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67699730972751,"sku":"AF-FP-3322A50","price":497.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-3322a50-adblue-hand-pump-kit-drum-view.png?v=1792020782"},{"product_id":"af-fp-332080","title":"AF-FP-332080 Bluequip Rotary Action Barrel Pump Kit, Adjustable Drum Adaptor, 2m Hose","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Keep the pump dedicated to AdBlue (DEF), as any diesel or oil left in it will contaminate the AdBlue. A-FLO describes the polypropylene pump as resistant to various industrial-grade fluids but does not publish a specific AdBlue compatibility statement or flow rate.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne or two vehicles, one drum, a few litres at a time: at that scale, AdBlue dispensing needs a clean, sealed transfer into the vehicle tank rather than a powered system. A rotary hand pump does the job with no power, no air and nothing to maintain beyond the pump itself.\u003c\/p\u003e\n\u003cp\u003ePouring AdBlue from an open drum or using a pump that has seen diesel puts contamination straight into the SCR system. This kit seals into the drum through its adjustable drum adaptor, which suits most drums, and transfers by turning the rotary handle, through a 2 m delivery hose to a stainless steel spout. The pump body is heavy duty polypropylene.\u003c\/p\u003e\n\u003cp\u003eA-FLO positions the kit for smaller operations running one or two vehicles and drawing AdBlue from 205L drums, where a powered system would sit idle most of the week.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with the rotary pump, 2 m delivery hose, stainless steel spout and an adjustable drum adaptor to suit most drums. The drum and AdBlue are not included, and no power or air supply is required.\u003c\/p\u003e\n\u003cp\u003eWhere daily volumes outgrow a polypropylene pump, the \u003ca href=\"\/products\/af-fp-3322a50\"\u003eAF-FP-3322A50\u003c\/a\u003e Bluequip stainless steel hand pump delivers up to 38 lpm and is made in Italy. For IBC supply, the \u003ca href=\"\/products\/af-fp-101320\"\u003eAF-FP-101320\u003c\/a\u003e Pro 240V AdBlue transfer kit adds an automatic nozzle and digital flow meter.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67699733561423,"sku":"AF-FP-332080","price":344.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-332080-rotary-barrel-pump-kit-drum-view.png?v=1792020782"},{"product_id":"af-ae-ibccover","title":"AF-AE-IBCCOVER Bluequip 1000L IBC Cover for AdBlue IBCs","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Sized for 1000L IBCs. A-FLO does not publish the cover's fitted dimensions or material, so confirm your IBC is a standard 1000L cage before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn AdBlue IBC left in the sun or riding on an open truck sees heat and moisture swings that the fluid inside does not handle well, and the problem only shows up later as AdBlue that is off-specification. Covering the IBC is the simplest control a site can put on its stock. A fitted cover does it without changing how the IBC is used.\u003c\/p\u003e\n\u003cp\u003eUncovered IBCs take direct sunlight and the temperature changes that come with it, in storage and in transit. The Bluequip cover fits over a 1000L IBC and seals at its edge, which keeps the space inside more stable against changing outside conditions and reduces the effect of direct sunlight on the AdBlue. It goes on and comes off easily whenever the IBC needs to be accessed or moved.\u003c\/p\u003e\n\u003cp\u003eIt suits AdBlue IBCs stored where they take direct sun, and IBCs carried between sites. A 240V electric pump kit can still be mounted on the side of the IBC with the cover in place, so a dispensing setup does not need to be removed to fit it.\u003c\/p\u003e\n\u003cp\u003eFor AdBlue (DEF) IBCs. The cover has no fluid connections and does not touch the AdBlue. No material specification, UV rating or certification is published.\u003c\/p\u003e\n\u003cp\u003eThe cover is supplied on its own at 2 kg; the IBC and any pump kit are not included. Fit it to the IBC cage and leave the side clear if a pump kit is mounted there.\u003c\/p\u003e\n\u003cp\u003eTo dispense from the covered IBC, the AF-FP-101320 Pro 240V AdBlue transfer kit mounts on the side of the IBC and adds an automatic nozzle and digital flow meter.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67699735658575,"sku":"AF-AE-IBCCOVER","price":156.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-ae-ibccover-ibc-cover.png?v=1792018440"},{"product_id":"af-fp-101330","title":"AF-FP-101330 Basic 240V AdBlue Transfer Kit for IBC, Manual Nozzle, No Meter, 35 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: This kit has a manual nozzle and no flow meter, so it will not stop automatically when the tank is full or record litres dispensed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-FP-101330 is the simplest way to put a 240V AdBlue dispensing point on a 1000L IBC. A self-priming 35 lpm pump sits on a stainless steel IBC bracket with a built-in nozzle holder, and a bottom suction kit draws from the IBC outlet.\u003c\/p\u003e\n\u003cp\u003eSelf-priming means the pump pulls AdBlue up from the IBC on start-up without being filled by hand first. The 6 m by 3\/4\" ID hose reaches most fill points from the IBC, and the stainless bracket keeps the setup off the ground and clear of contamination.\u003c\/p\u003e\n\u003cp\u003eIt suits workshops and yards that fill a small number of vehicles and do not need to track AdBlue use by vehicle or job.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e 240V, self-priming, 35 lpm | 6 m x 3\/4\" ID hose, manual nozzle | stainless steel IBC bracket, bottom suction kit\u003c\/p\u003e\n\u003cp\u003eSupplied with pump, stainless IBC bracket and nozzle holder, manual nozzle, 6 m hose and bottom suction kit. The IBC and AdBlue are not included. Site it within reach of a 240V outlet.\u003c\/p\u003e\n\u003cp\u003eTo meter every fill, the \u003ca href=\"\/products\/af-fp-101320\"\u003eAF-FP-101320\u003c\/a\u003e Pro kit adds a digital flow meter and automatic shut-off nozzle on the same stainless bracket. For a protected technopolymer housing, see the \u003ca href=\"\/products\/af-fp-201b103\"\u003eAF-FP-201B103\u003c\/a\u003e Premium kit.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766784983119,"sku":"AF-FP-101330","price":2310.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-101330-basic-240v-adblue-transfer-kit.png?v=1793486665"},{"product_id":"af-fp-201b103","title":"AF-FP-201B103 Premium 240V AdBlue IBC Pump Kit, PIUSI A60 Auto Nozzle \u0026 K24 Meter, 35 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: The 240V pump runs on a 20 minute working cycle, so allow it to rest between long transfers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-FP-201B103 is an enclosed, fully metered AdBlue dispenser for 1000L IBCs. It pairs a 35 lpm Suzzarablue AC pump with a PIUSI A60 automatic shut-off nozzle and a PIUSI K24 digital flow meter, so every fill stops when the tank is full and is counted in litres.\u003c\/p\u003e\n\u003cp\u003eThe kit is built around a Suzzarablue AC pump inside a shock-resistant technopolymer casing that protects the pump and fittings on the IBC. A mechanical IBC lock secures the dispenser to the tank, the ergonomic handle makes it easy to lift on and off, and a groove in the casing stores the 6 m hose neatly between fills.\u003c\/p\u003e\n\u003cp\u003ePIUSI designs the A60 nozzle to be light and ergonomic, with a body, lever, spout and break-away system built for impacts and daily handling. The K24 meter gives a litre reading per fill, useful for charging AdBlue to jobs or tracking use by vehicle.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e 230\/240V AC, up to 35 lpm, 20 minute working cycle | PIUSI A60 auto nozzle, PIUSI K24 meter, 6 m hose | technopolymer casing with IBC lock\u003c\/p\u003e\n\u003cp\u003eSupplied as a complete dispenser ready to lock onto the IBC. The IBC and AdBlue are not included. Site it within reach of a 240V outlet.\u003c\/p\u003e\n\u003cp\u003eFor the same Premium kit with the meter built into the nozzle, see the \u003ca href=\"\/products\/af-fp-201b103m\"\u003eAF-FP-201B103M\u003c\/a\u003e. For an open stainless-bracket setup, the \u003ca href=\"\/products\/af-fp-101320\"\u003eAF-FP-101320\u003c\/a\u003e Pro kit.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766788456527,"sku":"AF-FP-201B103","price":3339.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-201b103-premium-240v-adblue-ibc-pump-kit.png?v=1793486665"},{"product_id":"af-fp-201b103m","title":"AF-FP-201B103M Premium 240V AdBlue IBC Pump Kit, PIUSI SB325 Metered Auto Nozzle, 35 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: The 240V pump runs on a 20 minute working cycle, so allow it to rest between long transfers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-FP-201B103M is the Premium enclosed AdBlue dispenser with the meter moved into the nozzle. A PIUSI SB325 metered automatic nozzle shuts off when the tank is full and shows the litres dispensed right where the operator is looking.\u003c\/p\u003e\n\u003cp\u003eWith the meter in the nozzle there is no separate in-line meter on the hose, which keeps the setup compact. The 35 lpm Suzzarablue AC pump does the work inside the same technopolymer casing as the standard Premium kit.\u003c\/p\u003e\n\u003cp\u003eThe kit is built around a Suzzarablue AC pump inside a shock-resistant technopolymer casing that protects the pump and fittings on the IBC. A mechanical IBC lock secures the dispenser to the tank, the ergonomic handle makes it easy to lift on and off, and a groove in the casing stores the 6 m hose neatly between fills.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e 230\/240V AC, up to 35 lpm, 20 minute working cycle | PIUSI SB325 metered auto nozzle, 6 m hose | technopolymer casing with IBC lock\u003c\/p\u003e\n\u003cp\u003eSupplied as a complete dispenser ready to lock onto the IBC. The IBC and AdBlue are not included. Site it within reach of a 240V outlet.\u003c\/p\u003e\n\u003cp\u003eFor the Premium kit with an A60 auto nozzle and separate K24 in-line meter, see the \u003ca href=\"\/products\/af-fp-201b103\"\u003eAF-FP-201B103\u003c\/a\u003e. For an open stainless-bracket setup, the \u003ca href=\"\/products\/af-fp-101320\"\u003eAF-FP-101320\u003c\/a\u003e Pro kit.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766788587599,"sku":"AF-FP-201B103M","price":3339.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-201b103m-premium-240v-adblue-ibc-pump-kit.png?v=1793486665"},{"product_id":"af-fp-203010","title":"AF-FP-203010 Suzzarablue 240V AdBlue Diaphragm Transfer Pump, Self-Priming, 32 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: This is the bare pump. Hose, nozzle, meter and suction kit are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-FP-203010 is the PIUSI Suzzarablue AC diaphragm pump, the same pump family used in Bluequip's Premium IBC kits, supplied on its own for building or repairing an AdBlue system. It moves up to 32 lpm on 240V.\u003c\/p\u003e\n\u003cp\u003eThe electric motor drives a diaphragm with no dynamic seals, which removes the shaft seal that usually wears and leaks first in AdBlue service. The body, rotor and gears are technopolymer, with materials chosen to comply with ISO 22241, the standard for AdBlue handling. It self-primes and has a built-in bypass valve.\u003c\/p\u003e\n\u003cp\u003eIt suits workshops replacing a worn pump or fitting AdBlue to a tank they already have. The pump runs on a working cycle of up to 20 minutes.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF), antifreeze and windscreen washer fluid. Not for diesel or oils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e 240V, self-priming, up to 32 lpm, 20 minute working cycle | polypropylene body and diaphragm, no dynamic seals | on\/off switch, 2 m cable and plug, built-in bypass\u003c\/p\u003e\n\u003cp\u003eSupplied with on\/off switch, 2 m power cable with plug and hose connector. Add hose, a nozzle such as the \u003ca href=\"\/products\/af-ae-pax70adb\"\u003eAF-AE-PAX70ADB\u003c\/a\u003e stainless automatic nozzle, and a suction line to suit your tank.\u003c\/p\u003e\n\u003cp\u003eFor a ready-to-run IBC dispenser with this pump family, see the \u003ca href=\"\/products\/af-fp-201b103\"\u003eAF-FP-201B103\u003c\/a\u003e Premium kit. For 24V vehicle power, the \u003ca href=\"\/products\/af-fp-204010\"\u003eAF-FP-204010\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766788620367,"sku":"AF-FP-203010","price":988.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-203010-suzzarablue-240v-adblue-diaphragm-transfer-pump.png?v=1793486665"},{"product_id":"af-fp-204010","title":"AF-FP-204010 24V AdBlue Transfer Pump Kit, 6m Hose \u0026 Manual Swivel Nozzle, 35 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Runs on 24V DC from truck or plant batteries. A drum or IBC suction kit is sold separately, and the nozzle is manual, not auto shut-off.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-FP-204010 brings AdBlue dispensing to 24V vehicles: a self-priming pump rated at 35 lpm, supplied with a 6 m by 3\/4\" Bluequip hose and a manual nozzle with swivel.\u003c\/p\u003e\n\u003cp\u003eRunning on 24V means it can be mounted on a service truck or plant trailer and powered from the vehicle, with no generator or mains supply needed on site. The swivel on the nozzle stops the hose kinking as you move between fill points.\u003c\/p\u003e\n\u003cp\u003eIt suits mobile service crews, earthmoving and mining sites refuelling plant in the field, and truck-mounted AdBlue tanks.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e 24V DC, self-priming, 35 lpm | 6 m x 3\/4\" hose, manual swivel nozzle | drum or IBC suction kit sold separately\u003c\/p\u003e\n\u003cp\u003eSupplied with pump, 6 m hose and manual swivel nozzle. Add a 205L drum or 1000L IBC suction kit to suit your container, and wire it with fused cable sized to the pump.\u003c\/p\u003e\n\u003cp\u003eFor 240V workshop power, see the \u003ca href=\"\/products\/af-fp-203010\"\u003eAF-FP-203010\u003c\/a\u003e Suzzarablue pump. For an automatic shut-off upgrade, the \u003ca href=\"\/products\/af-ae-pax70adb\"\u003eAF-AE-PAX70ADB\u003c\/a\u003e stainless steel nozzle.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766791241807,"sku":"AF-FP-204010","price":1128.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-204010-24v-adblue-transfer-pump-kit.png?v=1793486665"},{"product_id":"af-fp-206p1723a","title":"AF-FP-206P1723A 240V AdBlue Submersible Pump, Regenerative Turbine, 35 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: This is a submersible pump that sits inside the tank. Hose, nozzle and meter are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-FP-206P1723A is a heavy-duty 240V submersible pump for AdBlue, delivering up to 35 lpm from inside the tank.\u003c\/p\u003e\n\u003cp\u003eBecause it sits in the fluid, it pushes AdBlue up and out rather than drawing it through a suction line, so there is nothing to prime. A regenerative turbine gives steady pressure, an integrated pressure regulator keeps output consistent, and a built-in non-return valve holds fluid in the delivery line between fills.\u003c\/p\u003e\n\u003cp\u003eIt suits bulk AdBlue storage tanks and fixed dispensing setups where an externally mounted pump is not practical.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e 240V submersible, up to 35 lpm | regenerative turbine, integrated pressure regulator | built-in non-return valve\u003c\/p\u003e\n\u003cp\u003eSupplied as the bare pump. Add delivery hose, a nozzle such as the \u003ca href=\"\/products\/af-ae-pax70adb\"\u003eAF-AE-PAX70ADB\u003c\/a\u003e stainless automatic nozzle, and a \u003ca href=\"\/products\/f0040710a\"\u003eK24 AdBlue meter\u003c\/a\u003e if you want to record litres. Have 240V connections made by a licensed electrician where required.\u003c\/p\u003e\n\u003cp\u003eFor an external 240V pump, see the \u003ca href=\"\/products\/af-fp-203010\"\u003eAF-FP-203010\u003c\/a\u003e Suzzarablue diaphragm pump.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766791307343,"sku":"AF-FP-206P1723A","price":1502.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-206p1723a-240v-adblue-submersible-pump-top-view.png?v=1793486665"},{"product_id":"af-ae-kp21m","title":"AF-AE-KP21M Air Operated AdBlue IBC Kit, 2:1 Pump, 4m Hose \u0026 Manual Nozzle, 40 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Needs a compressed air supply, and an air regulator is not included. A-FLO recommends fitting one.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-AE-KP21M runs AdBlue from a 1000L IBC on workshop air. A 2:1 ratio air-operated pump delivers up to 40 lpm, and it comes with a pump mount bracket, bottom IBC suction kit, 4 m of Bluequip delivery hose and a manual nozzle.\u003c\/p\u003e\n\u003cp\u003eAir power suits workshops that already have a compressor and air lines but no convenient 240V outlet at the IBC, and there is no electric motor at the tank. The 2:1 ratio means the pump delivers fluid at about twice the air pressure you feed it.\u003c\/p\u003e\n\u003cp\u003eIt is the lowest-cost way in the Bluequip range to put a pumped dispenser on an IBC.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e air operated, 2:1 ratio, up to 40 lpm | 4 m hose, manual nozzle | pump mount bracket and bottom IBC suction kit; air regulator not included\u003c\/p\u003e\n\u003cp\u003eSupplied with pump, mount bracket, bottom IBC suction kit, 4 m hose and manual nozzle. Add an air regulator and connect to your air line. The IBC and AdBlue are not included.\u003c\/p\u003e\n\u003cp\u003eFor a spring-retractable reel and automatic nozzle, see the \u003ca href=\"\/products\/af-ae-kp2110a\"\u003eAF-AE-KP2110A\u003c\/a\u003e (10 m) or \u003ca href=\"\/products\/af-ae-kp2115a\"\u003eAF-AE-KP2115A\u003c\/a\u003e (15 m). For 240V power, the \u003ca href=\"\/products\/af-fp-101330\"\u003eAF-FP-101330\u003c\/a\u003e Basic kit.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766791503951,"sku":"AF-AE-KP21M","price":2213.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-ae-kp21m-air-operated-adblue-ibc-kit.png?v=1793486665"},{"product_id":"af-ae-kp2110a","title":"AF-AE-KP2110A Air Operated AdBlue IBC Kit, 10m Spring Retractable Hose Reel \u0026 Auto Nozzle, 40 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Needs a compressed air supply, and an air regulator is not included. A-FLO recommends fitting one.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-AE-KP2110A is a complete air-operated AdBlue station for a 1000L IBC, with a 10 m spring retractable hose reel and an automatic nozzle. A 2:1 ratio pump delivers up to 40 lpm.\u003c\/p\u003e\n\u003cp\u003eThe spring reel pulls the hose back in after each fill, so it is off the floor, out of the way of forklifts and free of the grit that can contaminate AdBlue. The automatic nozzle shuts off when the vehicle tank is full, which prevents spills and overfills.\u003c\/p\u003e\n\u003cp\u003eIt suits fleet depots and workshops with an air supply that fill many vehicles from one IBC.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e air operated, 2:1 ratio, up to 40 lpm | 10 m spring retractable hose reel, automatic nozzle | pump mount bracket and bottom IBC suction kit; air regulator not included\u003c\/p\u003e\n\u003cp\u003eSupplied with pump, mount bracket, bottom IBC suction kit, 10 m hose reel and automatic nozzle. Plan a wall or frame position for the reel, add an air regulator and connect to your air line. The IBC and AdBlue are not included.\u003c\/p\u003e\n\u003cp\u003eFor more reach, see the \u003ca href=\"\/products\/af-ae-kp2115a\"\u003eAF-AE-KP2115A\u003c\/a\u003e (15 m reel). For a basic kit with 4 m hose, the \u003ca href=\"\/products\/af-ae-kp21m\"\u003eAF-AE-KP21M\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766793961551,"sku":"AF-AE-KP2110A","price":4661.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-ae-kp2110a-air-operated-adblue-ibc-kit.png?v=1793486665"},{"product_id":"af-ae-kp2115a","title":"AF-AE-KP2115A Air Operated AdBlue IBC Kit, 15m Spring Retractable Hose Reel \u0026 Auto Nozzle, 40 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Needs a compressed air supply, and an air regulator is not included. A-FLO recommends fitting one.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AF-AE-KP2115A is a complete air-operated AdBlue station for a 1000L IBC, with a 15 m spring retractable hose reel and an automatic nozzle. A 2:1 ratio pump delivers up to 40 lpm.\u003c\/p\u003e\n\u003cp\u003eThe spring reel pulls the hose back in after each fill, so it is off the floor, out of the way of forklifts and free of the grit that can contaminate AdBlue. The automatic nozzle shuts off when the vehicle tank is full, which prevents spills and overfills.\u003c\/p\u003e\n\u003cp\u003eIt suits fleet depots and workshops with an air supply that fill many vehicles from one IBC and need extra reach across a wide bay.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e air operated, 2:1 ratio, up to 40 lpm | 15 m spring retractable hose reel, automatic nozzle | pump mount bracket and bottom IBC suction kit; air regulator not included\u003c\/p\u003e\n\u003cp\u003eSupplied with pump, mount bracket, bottom IBC suction kit, 15 m hose reel and automatic nozzle. Plan a wall or frame position for the reel, add an air regulator and connect to your air line. The IBC and AdBlue are not included.\u003c\/p\u003e\n\u003cp\u003eFor a shorter run, see the \u003ca href=\"\/products\/af-ae-kp2110a\"\u003eAF-AE-KP2110A\u003c\/a\u003e (10 m reel). For a basic kit with 4 m hose, the \u003ca href=\"\/products\/af-ae-kp21m\"\u003eAF-AE-KP21M\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67766793994319,"sku":"AF-AE-KP2115A","price":4814.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-ae-kp2115a-air-operated-adblue-ibc-kit.png?v=1793486665"},{"product_id":"af-fp-a10h","title":"AF-FP-A10H Bluequip Genius Automatic AdBlue Nozzle with Hook, Non-Magnetic, Stainless Steel Tip, 1\" BSP Male","description":"\u003cp\u003eThe Bluequip Genius automatic AdBlue nozzle with a hanging hook. It shuts off by itself when the tank is full, then hangs on the tank, IBC frame or pump bracket so the stainless steel tip stays clean between fills.\u003c\/p\u003e\n\u003cp\u003eThat clean tip matters. AdBlue is easily contaminated, and a nozzle dropped on the ground can carry grit straight into a vehicle's SCR tank. The hook gives it a clean place to live, and the automatic shut-off means nobody stands over the filler watching for overflow. Light, easy to handle and ergonomic, it suits workshops, transport depots and farms filling from a pumped AdBlue tank or IBC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you order:\u003c\/strong\u003e The inlet is 1\" BSP male, so you'll need a 1\" BSP female fitting on your hose or swivel. Non-magnetic. For AdBlue (DEF) only. Not sure it suits your pump? Send us the pump model and we'll check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic shut-off AdBlue nozzle with hanging hook\u003c\/li\u003e\n\u003cli\u003eStainless steel tip\u003c\/li\u003e\n\u003cli\u003e1\" BSP male inlet\u003c\/li\u003e\n\u003cli\u003eWeight: 1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhich AdBlue nozzle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10\u003c\/strong\u003e: standard automatic nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10H\u003c\/strong\u003e (this one): automatic, with a hook to keep the tip clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10M\u003c\/strong\u003e: automatic, with a built-in meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-AE-PPM90ADB\u003c\/strong\u003e: manual gun for gravity-fed tanks, up to 90 lpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraco 24F529\u003c\/strong\u003e: heavy-duty stainless, 41.6 lpm, for high-volume sites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMagnetic versions (AF-FP-A10SS and AF-FP-A10MMF) can be ordered on request.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fit the nozzle to a 1\" BSP female hose end or swivel; it won't mate with NPT fittings without an adaptor. Seal the thread with PTFE tape or an AdBlue-compatible sealant, and flush the hose before first use so no debris reaches the nozzle.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67810818621519,"sku":"AF-FP-A10H","price":798.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-a10h-genius-automatic-adblue-nozzle-with-hook-side-view.jpg?v=1792493697"},{"product_id":"af-fp-a10m","title":"AF-FP-A10M Bluequip Genius Automatic AdBlue Nozzle with Built-In Meter, Stainless Steel Tip, 1\" BSP Male","description":"\u003cp\u003eThe Bluequip Genius automatic AdBlue nozzle with a meter built in, so you read the volume going into each vehicle right where the fill happens, not back at the pump.\u003c\/p\u003e\n\u003cp\u003eThat turns AdBlue from a bulk cost into a number you can allocate. Fleet depots can track use by vehicle, contractors can charge it back to jobs, and farms can see which machines use the most. Without a meter, usage is usually worked out from IBC deliveries, which shows how much went but not where. The nozzle shuts off automatically when the tank is full, and the stainless steel tip is made for AdBlue service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you order:\u003c\/strong\u003e The inlet is 1\" BSP male. For AdBlue (DEF) only. If you'll sell AdBlue to customers by volume, check the meter's trade measurement status first. Need the meter's units or accuracy? Ask us before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic shut-off AdBlue nozzle with built-in meter\u003c\/li\u003e\n\u003cli\u003eStainless steel tip\u003c\/li\u003e\n\u003cli\u003e1\" BSP male inlet\u003c\/li\u003e\n\u003cli\u003eWeight: 1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhich AdBlue nozzle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10\u003c\/strong\u003e: standard automatic nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10H\u003c\/strong\u003e: automatic, with a hook to keep the tip clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10M\u003c\/strong\u003e (this one): automatic, with a built-in meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-AE-PPM90ADB\u003c\/strong\u003e: manual gun for gravity-fed tanks, up to 90 lpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraco 24F529\u003c\/strong\u003e: heavy-duty stainless, 41.6 lpm, for high-volume sites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA magnetic metered version, AF-FP-A10MMF, can be ordered on request.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fit the nozzle to a 1\" BSP female hose end or swivel; it won't mate with NPT fittings without an adaptor. Seal the thread with PTFE tape or an AdBlue-compatible sealant, and flush the hose before first use so no debris reaches the meter.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67810818719823,"sku":"AF-FP-A10M","price":1309.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-a10m-genius-automatic-adblue-nozzle-with-meter-side-view.png?v=1792493697"},{"product_id":"af-fp-a10","title":"AF-FP-A10 Bluequip Genius Automatic AdBlue Nozzle, No Hook, Non-Magnetic, Stainless Steel Tip, 1\" BSP Male","description":"\u003cp\u003eThe standard Bluequip Genius automatic AdBlue nozzle: a stainless steel tip, automatic shut-off when the tank is full, and nothing you don't need.\u003c\/p\u003e\n\u003cp\u003eIt's the one to choose when replacing a worn nozzle on an existing AdBlue pump, or when the nozzle goes back into a bracket after each fill. Light, easy to handle and ergonomic, it's comfortable on a nozzle that gets picked up many times a day, and the automatic shut-off means nobody stands over the filler watching for overflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you order:\u003c\/strong\u003e The inlet is 1\" BSP male, so you'll need a 1\" BSP female fitting on your hose or swivel. No hook, non-magnetic; for magnetic nozzle holsters, choose the AF-FP-A10SS. For AdBlue (DEF) only. Not sure it suits your pump? Send us the pump model and we'll check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic shut-off AdBlue nozzle\u003c\/li\u003e\n\u003cli\u003eStainless steel tip\u003c\/li\u003e\n\u003cli\u003e1\" BSP male inlet\u003c\/li\u003e\n\u003cli\u003eWeight: 1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhich AdBlue nozzle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10\u003c\/strong\u003e (this one): standard automatic nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10H\u003c\/strong\u003e: automatic, with a hook to keep the tip clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10M\u003c\/strong\u003e: automatic, with a built-in meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-AE-PPM90ADB\u003c\/strong\u003e: manual gun for gravity-fed tanks, up to 90 lpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraco 24F529\u003c\/strong\u003e: heavy-duty stainless, 41.6 lpm, for high-volume sites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fit the nozzle to a 1\" BSP female hose end or swivel; it won't mate with NPT fittings without an adaptor. Seal the thread with PTFE tape or an AdBlue-compatible sealant, and flush the hose before first use so no debris reaches the nozzle.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67810818785359,"sku":"AF-FP-A10","price":676.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-a10-genius-automatic-adblue-nozzle-side-view.png?v=1792493697"},{"product_id":"af-ae-ppm90adb","title":"AF-AE-PPM90ADB Bluequip Manual AdBlue Dispense Gun for Gravity Feed, Polypropylene, 3\/4\" BSP Female Swivel, 90 lpm","description":"\u003cp\u003eA sturdy manual AdBlue gun built for gravity feed, flowing up to 90 lpm from an elevated tank or IBC with no pump in the line.\u003c\/p\u003e\n\u003cp\u003eAutomatic nozzles are designed around pumped flow, so on a gravity-fed tank a manual gun is the simpler, more dependable choice, and this one is rated specifically for gravity-feed use. The polypropylene body has no metal for AdBlue to attack, and the swivel inlet lets the gun turn in your hand so the hose isn't wound up as you move between vehicles. It suits farms, remote sites and small depots.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you order:\u003c\/strong\u003e This is a manual gun with no automatic shut-off, so the operator controls the fill and watches for overflow. The inlet is a 3\/4\" BSP female swivel. For AdBlue (DEF).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManual AdBlue dispense gun for gravity feed\u003c\/li\u003e\n\u003cli\u003eFlow: up to 90 lpm\u003c\/li\u003e\n\u003cli\u003ePolypropylene body\u003c\/li\u003e\n\u003cli\u003e3\/4\" BSP female swivel inlet\u003c\/li\u003e\n\u003cli\u003eWeight: 1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhich AdBlue nozzle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10\u003c\/strong\u003e: standard automatic nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10H\u003c\/strong\u003e: automatic, with a hook to keep the tip clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-FP-A10M\u003c\/strong\u003e: automatic, with a built-in meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAF-AE-PPM90ADB\u003c\/strong\u003e (this one): manual gun for gravity-fed tanks, up to 90 lpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraco 24F529\u003c\/strong\u003e: heavy-duty stainless, 41.6 lpm, for high-volume sites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fit the gun to a 3\/4\" BSP male hose tail or fitting; it won't mate with NPT threads without an adaptor. Seal with PTFE tape or an AdBlue-compatible sealant, flush the hose before first use, and store the gun off the ground so the spout stays clean.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67810818850895,"sku":"AF-AE-PPM90ADB","price":136.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-ae-ppm90adb-manual-adblue-dispense-gun-side-view.png?v=1792493697"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/Bluequip-Logo.webp?v=1793656985","url":"https:\/\/geelongfiltersales.com.au\/collections\/bluequip.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}