{"title":"Chemical Sprayers \u0026 Pumps","description":"\u003cp\u003eChemical sprayers apply cleaners, degreasers, solvents and rust treatments exactly where they're needed, without decanting into open trays or wasting product. Hand-held pressure sprayers are pumped up by hand and deliver a fine mist or a jet, which suits workshop benches, engine bays and parts cleaning. Seal material decides the choice, because the seals and nozzle have to resist the chemical you're spraying. Capacity comes next.\u003c\/p\u003e\u003cp\u003eA sprayer built for water-based detergent won't stand up to a solvent. Its seals swell, the pump stops holding pressure and you end up with chemical on your hands. Read the label and safety data sheet before you fill any sprayer.\u003c\/p\u003e","products":[{"product_id":"af-ap-3132pk","title":"Kläger Plastik Hobby 1L Solvent Resistant Industrial Pressure Sprayer","description":"\u003cp\u003eMost pump sprayers give up the first time a solvent-based fluid gets into them: the seals swell and the trigger stops sealing. The Kläger Plastik Hobby 1L holds up to exactly those fluids, a solvent-resistant industrial sprayer for the chemicals that finish a standard bottle early.\u003c\/p\u003e\n\u003cp\u003eWhat lets it handle those fluids is the material spec. The wetted parts are PA, FKM and V2A, a combination compatible with most solvent-based liquids including hydrocarbons, mineral oils and petroleum products and their derivatives. In practice that is the difference between a sprayer you can use for degreasers, release agents and maintenance chemicals and one that hardens and leaks after a few fills.\u003c\/p\u003e\n\u003cp\u003eIt carries a 0.9 L working fill and runs to a maximum 3 bar (300 kPa \/ 44 psi). At 3 bar (300 kPa \/ 44 psi) it delivers around 300 ml\/min, a steady, repeatable output for the kind of repetitive application work where consistency matters more than raw volume. A 60 degree fine spray angle gives broad even coverage, and a focused jet reaches up to 4 m, so you can hit an awkward guard or housing without soaking the whole bench to get there.\u003c\/p\u003e\n\u003cp\u003eThe detail work is what makes it usable day to day. An integrated scale marked in litres, pints and gallons and a set of mixing-ratio markings let you dilute and repeat a mix accurately, which matters when several techs share the same chemicals and the ratio has to come out the same each time. AntiGlide haptic elements and a recessed grip keep control with gloves on, and transparent visibility stripes let you read the fill level at a glance on a coloured bottle.\u003c\/p\u003e\n\u003cp\u003eIt is approved for operating temperatures from -5 to +30°C, covering typical shed and site conditions, and suits construction, automotive workshops, maintenance, cleaning and hygiene, food-related work where appropriate, and house and garden jobs that need a more chemical-tolerant sprayer. Confirm your fluid against the PA, FKM and V2A compatibility before filling, as this is a solvent-resistant sprayer rather than a universal one.\u003c\/p\u003e\n\u003cp\u003eBeyond the reach of the focused jet, the everyday value is control. A fine, even 60 degree pattern lays product down without the overspray that wastes chemical and coats everything nearby, which on a shared bench or near other equipment is what keeps a quick spray job from turning into a wider clean-up.\u003c\/p\u003e\n\u003cp\u003eIf you need more capacity between refills, the Kläger Profi 1.5 L is the larger sprayer in the same range with the same solvent-resistant build, step up to it if you empty this one too often between refills.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482525327439,"sku":"AF-AP-3132PK","price":75.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-3132pk-hobby-1l-solvent-resistant-pressure-sprayer.webp?v=1785301358"},{"product_id":"af-ap-3135pk","title":"Kläger Plastik Profi 1.5L Solvent Resistant Industrial Pressure Sprayer","description":"\u003cp\u003eSharing solvent chemicals across a workshop only works if every tech can mix them the same way and the sprayer survives the fluids. Half a litre bigger than the Hobby, the Kläger Plastik Profi 1.5L is a solvent-resistant sprayer for shared, repeatable workshop use.\u003c\/p\u003e\n\u003cp\u003eThe wetted parts are PA, FKM and V2A, compatible with most solvent-based liquids including hydrocarbons, mineral oils and petroleum products and their derivatives. That material spec is why it holds up to cleaners, degreasers, release agents and process fluids that swell and split the seals in standard sprayers within a few fills.\u003c\/p\u003e\n\u003cp\u003eIt holds a 1.5 L fill, half a litre more than the Hobby, so there are fewer trips back to the drum on bigger jobs. Maximum pressure is 3 bar (300 kPa \/ 44 psi), delivering a consistent pattern without a battery or a motor to fail. Set a fine 60 degree angle for broad even coverage or switch to a focused jet reaching up to 4 m for machinery guards, trays, benches, wheels, panels and housings, and an optional 360 degree spray function lets you apply at awkward angles and inverted points that a fixed sprayer cannot reach.\u003c\/p\u003e\n\u003cp\u003eAn integrated fill scale in litres, pints and gallons and a mixing-ratio guide keep dilution accurate and repeatable across a shared bottle, and AntiGlide haptic elements with a recessed grip give control with gloves on and less hand fatigue over a long spraying run. Visibility stripes make fluid-level checks quick, particularly with coloured liquids.\u003c\/p\u003e\n\u003cp\u003eIt is approved from -5 to +30°C and suits construction, automotive workshops, maintenance, cleaning and hygiene, food environments and home and garden use. Confirm your fluid against the PA, FKM and V2A compatibility before filling, as this is built for solvent tolerance rather than as a universal sprayer.\u003c\/p\u003e\n\u003cp\u003eThe optional 360 degree function is worth calling out for overhead and inverted work. Applying a release agent to the underside of a guard or into an upturned housing is where a standard sprayer starves and stops, and the 360 draw keeps it feeding whichever way the bottle is turned.\u003c\/p\u003e\n\u003cp\u003eIf a 1.5 L fill is more than you need for quick jobs, the Kläger Hobby 1 L is the compact option in the same range with the same solvent-resistant internals, drop to it if a 1.5 L fill is more than your quick jobs need.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482534961231,"sku":"AF-AP-3135PK","price":85.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-3135pk-1-5l-solvent-resistant-pressure-sprayer.webp?v=1785301363"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/Workshop-Supplies_Category-Image.webp?v=1781693321","url":"https:\/\/geelongfiltersales.com.au\/collections\/chemical-sprayers.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}