{"title":"Coolant Filters","description":"\u003cp\u003eCoolant filters remove scale, rust and debris from the cooling system on heavy-duty diesel engines, and many also release supplemental coolant additive (SCA) to keep the coolant chemistry in balance. Charged filters dose SCA as they work, while blank filters carry no chemical and only filter, for engines on a fully formulated coolant. Charged or blank is the first decision, then the dose size. Too little additive leaves wet cylinder liners open to cavitation pitting and corrosion. Too much, from a charged filter on top of a coolant that already carries it, can drop solids into the radiator and water pump. Dosing and testing are set out in the guide below.\u003c\/p\u003e","products":[{"product_id":"p5092","title":"P5092 Coolant Filter- Element, 0 Chemical, Bail Handle","description":"\u003cp\u003eBaldwin P5092 non-chemical coolant filter element. 92.9 mm outer diameter, 41.3 mm inner diameter, 134.1 mm long. Detroit Diesel DD15 engines and Komatsu equipment.\u003c\/p\u003e\n\u003cp\u003eA cartridge coolant element for the Detroit Diesel DD15 and Komatsu equipment, with no additive charge.\u003c\/p\u003e\n\u003cp\u003eIt cleans rust, scale and casting grit out of the coolant on these engines, seating inside the machine's reusable housing, and its wire bail handle lifts it out cleanly at service. It carries no supplemental additives.\u003c\/p\u003e\n\u003cp\u003e20 cross-reference numbers covering Detroit Diesel DD15 engines and Komatsu equipment, with Fleetguard, Donaldson, WIX and Luber-finer numbers also published. Made for the long-life coolant in these systems - it carries no additive charge.\u003c\/p\u003e","brand":"Baldwin","offers":[{"title":"Default Title","offer_id":45475133096015,"sku":"P5092","price":170.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/baldwin-p5092-coolant-filter.webp?v=1788836653"},{"product_id":"wf2073","title":"WF2073 Coolant Filter- Spin-on, 8 Units DCA4+","description":"\u003cp\u003eFleetguard WF2073 spin-on coolant filter, 8 units DCA4. Nitrite, molybdate and phosphate protection. 11\/16-16 UN-2B, 105.66 mm. Fits Mack, UD Trucks, Bomag, Daewoo.\u003c\/p\u003e\u003cp\u003eA coolant filter does two jobs at once, and most people buying one only think about the first. Getting the second one wrong is what puts pits through cylinder liners.\u003c\/p\u003e\u003cp\u003eThe WF2073 is a spin-on coolant filter charged with 8 units of Fleetguard DCA4 supplemental coolant additive. The filtration function removes casting sand, scale, rust and the solid debris that circulates through any cooling system. The chemical function is separate and arguably more important: as coolant circulates, the DCA4 charge is released into the system, replenishing the additive package that depletes over time. DCA4 chemistry contains nitrite and molybdate for liner pitting protection and phosphate for acid protection.\u003c\/p\u003e\u003cp\u003eLiner pitting is a cavitation phenomenon, not a corrosion one. Vibrating cylinder walls collapse vapour bubbles against the liner surface, and without an adequate nitrite level in the coolant the protective film is stripped faster than it re-forms. The result is perforation of the liner from the coolant side, and it is not repairable.\u003c\/p\u003e\u003cp\u003eBecause the additive charge is specific, the unit count matters. A filter delivering the wrong number of DCA4 units into your system size will either under-protect it or overconcentrate it. Confirm the requirement for your engine before substituting a different unit count.\u003c\/p\u003e\u003cp\u003eCoverage spans Mack and UD Trucks on-highway applications, Bomag compaction equipment, Clark Equipment and Fiatallis plant, and Daewoo machinery.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 15 or more OEM and aftermarket brands, including Mack 5839WF2073, Bomag 31701000, Clark Equipment 961028, Daewoo 991215115, UD Trucks FL91599003, and Kassbohrer 83120620800. Full cross-reference table in the specifications tab below.\u003c\/p\u003e\u003cp\u003eThread size is 11\/16-16 UN-2B. Verify this against your filter head, and confirm your engine's DCA4 unit requirement matches 8 units, before ordering. If you are unsure of your current coolant additive level, test it before changing the filter rather than after.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":45478304350287,"sku":"WF2073","price":36.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2073-coolant-filter.webp?v=1785300941"},{"product_id":"wf2074","title":"WF2074 Coolant Filter- Spin-on, 12 Units DCA4+","description":"\u003cp\u003eFleetguard WF2074 spin-on coolant filter. 12 units DCA4 additive in pellet form, 11\/16-16 UN-2B thread, 137.21 mm long. Cummins standard service.\u003c\/p\u003e\u003cp\u003eCooling system failures account for more than 40% of engine repair costs, which puts a coolant filter in a different category from the part price would suggest.\u003c\/p\u003e\u003cp\u003eThis filter does two jobs. The mechanical one removes casting sand, scale, rust and the solid debris that circulates through any cooling system and settles in the low flow areas of the radiator and oil cooler, where it quietly reduces heat transfer. The chemical one releases 12 units of DCA4 supplemental coolant additive into the system as coolant passes through, replenishing the additive package that depletes with use.\u003c\/p\u003e\u003cp\u003eThe additive is carried in pellet form, which dissolves progressively rather than dumping into the system at once.\u003c\/p\u003e\u003cp\u003eDCA4 chemistry contains nitrite and molybdate for liner pitting protection and phosphate for acid protection. Liner pitting is a cavitation phenomenon: vibrating cylinder walls collapse vapour bubbles against the liner, and without adequate nitrite the protective film is stripped faster than it re-forms. The result is perforation from the coolant side, and it is not repairable.\u003c\/p\u003e\u003cp\u003eThe unit count matters. A filter delivering the wrong number of DCA4 units into your system volume will either under-protect it or overconcentrate it. Confirm the requirement for your engine before substituting a different count.\u003c\/p\u003e\u003cp\u003eThread is 11\/16-16 UN-2B with a 71.88 mm gasket outer diameter.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 4 or more OEM brands, including Mack 3076PR3911, Fiatallis 9901570, Daewoo 91008147, and BMC Trucks 9P909753. Full cross-reference table in the specifications tab below.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":45478312017999,"sku":"WF2074","price":43.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2074-coolant-filter.webp?v=1785300942"},{"product_id":"wf2076","title":"WF2076 Coolant Filter- Spin-on, 23 Units DCA4+","description":"\u003cp\u003eFleetguard WF2076 spin-on coolant filter. 23 units DCA4 additive in pellet form, 11\/16-16 UN-2B thread, 137.16 mm long. Cummins standard service.\u003c\/p\u003e\u003cp\u003eThree DCA4 filters in this range share a thread, a gasket and almost identical dimensions, and differ only in how much additive they carry: 8 units, 12 units and 23 units.\u003c\/p\u003e\u003cp\u003eThat is the specification to get right, and it is the one you cannot see. The WF2073, WF2074 and this filter will all thread onto the same head. Fit the 23 unit filter to a system sized for 8 and you overconcentrate the additive, which can drop silicate out of solution and form gel. Fit the 8 unit filter where 23 were needed and the nitrite level falls below the threshold that protects against liner pitting.\u003c\/p\u003e\u003cp\u003eUnit count is determined by cooling system volume, so it is a property of the machine rather than the engine alone. If a machine has had a larger radiator fitted, or a remote cooler added, the original figure may no longer be right.\u003c\/p\u003e\u003cp\u003eTest the coolant before you change the filter rather than after. A test strip tells you where the additive level actually sits, which is worth more than any assumption about what the last person fitted.\u003c\/p\u003e\u003cp\u003eThe additive is carried in pellet form for progressive release.\u003c\/p\u003e\u003cp\u003eThread is 11\/16-16 UN-2B with a 71.88 mm gasket outer diameter.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 4 or more OEM brands, including Bomag 31701076, Fiatallis 76107812, Kassbohrer 83121050210, and Furukawa 3381756H1. Full cross-reference table in the specifications tab below.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":45478322077775,"sku":"WF2076","price":68.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2076-coolant-filter.webp?v=1785300943"},{"product_id":"wf2077","title":"WF2077 Coolant Filter- Standard Service, 0 Chemical","description":"\u003cp\u003eFleetguard WF2077 coolant filter. Standard service, no chemical additive, 11\/16-16 UN-2B thread, 137.31 mm long. Particle filtration only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis filter releases no supplemental coolant additive. If your engine relies on a charged filter to maintain its additive level, this is not the correct part.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe choice between a charged and a non-chemical coolant filter is dictated by which coolant is in the system, not by preference.\u003c\/p\u003e\u003cp\u003eConventional coolants rely on supplemental coolant additive being topped up through the service life, and a charged filter is how that happens automatically. Fully formulated and long life coolants already carry their additive package and do not require an SCA precharge. Adding more through a charged filter overconcentrates the system, which can drop silicate or phosphate out of solution and produce gel or deposits in the very passages you are trying to keep clear.\u003c\/p\u003e\u003cp\u003eOrganic acid technology coolants in particular are specified to run with chemical-free filters, and doing so extends coolant testing intervals substantially.\u003c\/p\u003e\u003cp\u003eSo the question to answer before ordering is what coolant is in the machine. If it is a fully formulated or extended life product, this is the filter. If the machine runs conventional coolant on an SCA maintenance programme, you want a DCA4 or DCA2 charged filter instead.\u003c\/p\u003e\u003cp\u003eMechanically it removes casting sand, scale, rust and general solid debris that would otherwise settle in the radiator and oil cooler and reduce heat transfer.\u003c\/p\u003e\u003cp\u003eThread is 11\/16-16 UN-2B with a 71.88 mm gasket outer diameter.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 4 or more OEM brands, including Mack 5839WF2077 and 3076PR3383, Renault 5001858090, TRP DAF 1534532, and Blue Bird 64641. Full cross-reference table in the specifications tab below.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":45478324797519,"sku":"WF2077","price":27.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2077-coolant-filter.webp?v=1785300944"},{"product_id":"wf2122","title":"WF2122 Coolant Filter- Extended Service, 0 Chemical","description":"\u003cp\u003eFleetguard WF2122 coolant filter. Extended service, no chemical additive, 11\/16-16 UN-2B thread, 105.99 mm long. Particle filtration only.\u003c\/p\u003e\u003cp\u003eFleetguard designate this an extended service filter with no chemical charge, and the two halves of that description belong together.\u003c\/p\u003e\u003cp\u003eExtended service and chemical-free go hand in hand because they describe the same maintenance philosophy. A system running fully formulated or long life coolant does not need additive replenishment, so the filter is doing purely mechanical work, and mechanical work does not need doing as often. Where a conventional system might have its coolant tested and its charged filter changed at every major service, an extended service arrangement with the right coolant can run to considerably longer intervals with annual testing.\u003c\/p\u003e\u003cp\u003eThat only holds if the coolant matches. Fitting an extended service filter to a system running conventional coolant on an SCA programme means the additive level falls away between changes with nothing replenishing it, and the first sign is usually liner pitting found during an unrelated repair.\u003c\/p\u003e\u003cp\u003eCheck what coolant is in the machine before extending anything.\u003c\/p\u003e\u003cp\u003eAt 105.99 mm this is a shorter filter than the standard service versions in the range, so check clearance is not the constraint if you are changing between them.\u003c\/p\u003e\u003cp\u003eThread is 11\/16-16 UN-2B with a 72.14 mm gasket outer diameter.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 4 or more OEM brands, including Cummins XWF4246 and 3098689, Mack 5839WF2122, Paccar 184365, and International 1833690C1. Full cross-reference table in the specifications tab below.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":45478329876559,"sku":"WF2122","price":146.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2122-coolant-filter.webp?v=1785300945"},{"product_id":"wf2142","title":"WF2142 Coolant Filter- Standard Service, 0 Chemical","description":"\u003cp\u003eFleetguard WF2142 coolant filter, standard service, zero chemical charge. Particle filtration only, no SCA released. 101 mm long, 70 mm gasket OD. Fits Scania, DAF, Renault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility note: this is a standard service coolant filter with zero chemical charge. It provides particle filtration only and releases no supplemental coolant additive. If your engine requires a DCA4 or DCA2 charged filter to maintain its additive level, this is not the correct part.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFully formulated extended life coolants carry their own additive package and do not want a supplemental charge added on top of it. Fitting a chemically charged filter to a system running that coolant overconcentrates the additive and creates its own set of problems.\u003c\/p\u003e\u003cp\u003eThe WF2142 is a standard service coolant filter with no chemical charge, doing the mechanical half of the job only. It removes casting sand left over from manufacture, scale that flakes off internal surfaces, rust and the general solid debris that accumulates in a cooling system over time. That debris matters because it settles in the low flow areas of the radiator and oil cooler and progressively reduces heat transfer where you can least afford to lose it.\u003c\/p\u003e\u003cp\u003eCoverage runs across European truck applications including Scania, DAF and Renault Trucks, alongside Doosan and Orenstein and Koppel construction equipment.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 7 OEM and aftermarket brands, including Scania 378396 and 342988, TRP DAF 1501091 and 1534553, Renault 5021188392, Doosan MX251012, and Orenstein and Koppel 1939100. Full cross-reference table in the specifications tab below.\u003c\/p\u003e\u003cp\u003eConfirm your engine and coolant specification call for a non-charged filter, and verify gasket outer diameter and thread against your existing filter, before ordering.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":45478334955599,"sku":"WF2142","price":37.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2142-coolant-filter.webp?v=1785300946"},{"product_id":"wf2144","title":"WF2144 Coolant Filter- Spin-on, 12 Units DCA2","description":"\u003cp\u003eFleetguard WF2144 spin-on coolant filter. 12 units DCA2 additive in pellet form, 11\/16-16 UN-2B thread, 137.24 mm long. Komatsu standard service.\u003c\/p\u003e\u003cp\u003eThis filter carries DCA2 rather than DCA4, and the two are not interchangeable even though the filters look identical and share a thread.\u003c\/p\u003e\u003cp\u003eDCA4 is Fleetguard's chemistry for Cummins applications. DCA2 is the chemistry specified for Komatsu. They are formulated differently, and mixing supplemental coolant additive chemistries in one system can cause additives to drop out of solution rather than protect anything. The result is sludge in the cooling system and a loss of the corrosion protection you were paying for.\u003c\/p\u003e\u003cp\u003eThe lesson is that a coolant filter is not selected by thread and unit count alone. It is selected by which additive package the engine manufacturer specified. Check what is in the system before you change it, and if a machine has been through several owners, test rather than assume.\u003c\/p\u003e\u003cp\u003eThe additive is carried in pellet form for progressive release into the coolant.\u003c\/p\u003e\u003cp\u003eThread is 11\/16-16 UN-2B with a 71.98 mm gasket outer diameter, 137.24 mm long.\u003c\/p\u003e\u003cp\u003eCoverage spans Komatsu applications along with Cummins, DAF, Atlas Copco and Orenstein and Koppel references.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 4 or more OEM brands, including Cummins 5263175, TRP DAF 1535349, Orenstein and Koppel 1449525, and Atlas Copco 2914604 references. Full cross-reference table in the specifications tab below.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":45478344654927,"sku":"WF2144","price":41.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2144-coolant-filter.webp?v=1785300947"},{"product_id":"wf2075","title":"WF2075 Coolant Filter- Spin-on, 15 Units DCA4+","description":"\u003cp\u003eFleetguard WF2075 spin-on coolant filter with 15 units of DCA4+ supplemental coolant additive in pellet form. 11\/16-16 UN-2B thread, 93.62 mm OD, 137.21 mm long. Fits Cummins, Komatsu, Case IH and Liebherr. Replaces Cummins 3318318 and 3305370.\u003c\/p\u003e\u003cp\u003eThis is a chemical coolant filter: as well as filtering the coolant, it releases its 15 units of DCA4+ additive into the system. It sits between the 12 unit WF2074 and the 23 unit WF2076 on the same thread, so choose by the unit charge your cooling system volume calls for.\u003c\/p\u003e\u003cp\u003eSupplemental coolant additive protects wet cylinder liners and cooling system metals, but it works inside a concentration band. Too little and the liners are left exposed to cavitation erosion. Too much and the additive can drop out of solution, leaving deposits in radiator tubes and around water pump seals. Fitting a charged filter at every service, regardless of what the coolant already holds, is the usual way a system ends up overdosed.\u003c\/p\u003e\u003cp\u003eTest the coolant's additive concentration before fitting, and let the result decide whether a charged filter or an uncharged service filter is right for this change.\u003c\/p\u003e\u003cp\u003eThe additive is DCA4+ in pellet form. Thread is 11\/16-16 UN-2B with a 71.98 mm gasket OD and 62.53 mm gasket ID, and the seam diameter is 94.49 mm.\u003c\/p\u003e\u003cp\u003eCoverage spans L10, M11, N14 and ISM11 engines in Freightliner, International, Kenworth and Peterbilt trucks, Cummins QSK45, QSK60 and QST30 engines, and Komatsu off-highway equipment.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 61 OEM and aftermarket brands, including Cummins 3318318, 3316461 and 1303541, Case IH J318318, Liebherr 7367051 and Mack 5839WF2075. Full cross-reference table in the specifications tab below.\u003c\/p\u003e\u003cp\u003eVerify thread size and gasket diameter against the filter you are removing before ordering.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":67849359720527,"sku":"WF2075","price":43.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2075-coolant-filter.jpg?v=1793059176"},{"product_id":"wf2126","title":"WF2126 Coolant Filter- Spin-on, M36x2 Thread","description":"\u003cp\u003eFleetguard WF2126 spin-on coolant filter. M36X2-6G thread, 95.76 mm OD, 146.3 mm long. Fits ISX, ISX12, ISX15 and X15 engines in Freightliner, Kenworth, Peterbilt and International trucks. Replaces Cummins 4907485 and Volvo 3093320. Supersedes Fleetguard WF2125.\u003c\/p\u003e\u003cp\u003eThe first question about any coolant filter is whether it carries additive, and for the WF2126 Fleetguard's own data does not give a consistent answer.\u003c\/p\u003e\u003cp\u003eFleetguard classes this part as a blank water filter, meaning no chemical charge, while the same record lists a DCA4+ tablet additive. Both cannot be right. The difference matters: a blank filter is the choice where the coolant carries its own full additive package, and adding a charged filter to that system can push additive concentration out of its working band. A charged filter on a system that relies on it is the opposite case, and leaving the charge out lets additive levels fall over time.\u003c\/p\u003e\u003cp\u003eUntil that is confirmed, match the filter to what is on the engine now and to the coolant in the system, and test coolant additive concentration at the change rather than assuming.\u003c\/p\u003e\u003cp\u003eThread is M36X2-6G, gasket ID is 80.87 mm and seam diameter is 91.95 mm. Fleetguard lists 3958392S as the service part used with this filter.\u003c\/p\u003e\u003cp\u003eCoverage spans Freightliner, International, Kenworth, Peterbilt and Mack trucks with ISX, ISX12, ISX15 and X15 engines.\u003c\/p\u003e\u003cp\u003eCross-references confirmed across 17 OEM and aftermarket brands, including Cummins 4907485 and 3680433, Volvo 3093320, Case IH 441702A1 and Atlas Copco 57929044. Full cross-reference table in the specifications tab below.\u003c\/p\u003e\u003cp\u003eTwo entries in Fleetguard's data for this filter do not look right: the additive rows (a DCA4+ tablet charge on a part classed as blank), and a gasket outer diameter that matches the body diameter exactly and is larger than the seam diameter. We have published neither. Ask us and we will confirm both with Fleetguard. Verify thread size and gasket diameter against the filter you are removing before ordering.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":67849366601807,"sku":"WF2126","price":124.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2126-coolant-filter.jpg?v=1793053373"},{"product_id":"wf2109","title":"WF2109 Coolant Filter- Spin-on","description":"\u003cp\u003eFleetguard WF2109 spin-on coolant filter. M16 x 1.5 thread, 93.83 mm OD, 138.05 mm long, gasket 71.98 mm OD by 62.53 mm ID. Fits Volvo D12D and VED12 engines. Replaces Volvo 3969696.\u003c\/p\u003e\u003cp\u003eBefore fitting, establish whether your maintenance relies on this filter to carry supplemental coolant additive. Fleetguard's data is not consistent on this part: its classification is a DCA4 water filter, while its product description calls it a non-chemical filter that provides cooling system filtration only.\u003c\/p\u003e\u003cp\u003eThe difference matters. A chemical-charged filter releases additive into the coolant to replace what has been used; a non-chemical filter filters and adds nothing. If the service plan counts on the filter for additive and it carries none, the coolant's protection runs down with nobody noticing. Test additive concentration at service and top up separately if needed. Ask us and we will confirm the chemical charge with Fleetguard.\u003c\/p\u003e\u003cp\u003eCoverage spans Volvo on-highway trucks with the VED12 engine and the Volvo D12D engine.\u003c\/p\u003e\u003cp\u003eCross-reference confirmed against 1 OEM brand, covering Volvo 3969696 and VOE3969696. Full cross-reference table in the specifications tab below.\u003c\/p\u003e\u003cp\u003eVerify thread size and gasket diameter against the filter you are removing before ordering.\u003c\/p\u003e","brand":"Fleetguard","offers":[{"title":"Default Title","offer_id":67855517352015,"sku":"WF2109","price":18.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fleetguard-wf2109-coolant-filter.jpg?v=1793044676"},{"product_id":"p552070","title":"P552070 Coolant Filter, Spin-On SCA+ 2 Units","description":"\u003cp\u003eShort spin-on coolant filter that releases 2 units of Donaldson SCA+ supplemental coolant additive, listed against Cummins 3318157. It suits Cummins 6CT8.3 engines in Peterbilt trucks and smaller cooling systems on short service intervals.\u003c\/p\u003e\n\u003cp\u003eSCA+ is Donaldson's improved-protection chemistry. Nitrite and molybdate protect against cavitation erosion and liner pitting, a phosphate buffer holds the pH so the coolant does not turn acidic, silicate protects iron and aluminium, and tolyltriazole plates copper and brass parts. Donaldson rates SCA+ as a substitute for DCA4 and BTA Plus filters.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. At each filter change, Donaldson's coolant service guide uses 2 units for systems up to 19 L on 250 to 625-hour service intervals, systems of 22.7 to 37.8 L on 125 to 250-hour intervals, and systems of 41.6 to 75.7 L on 125-hour intervals. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before you choose a unit count.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 43 fitments, almost all trucks. Peterbilt with the Cummins 6CT8.3 makes up most of the list, followed by Volkswagen trucks, AGCO tractors and Kenworth, with single Cummins 6BTAA5.9 and ISBe entries.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 13 OEM and aftermarket brands, including Cummins 3318157 and 3100303, Komatsu CU3318157, AGCO 1076752M1, New Holland 75206848 and Volkswagen TN4121099. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025115312207,"sku":"P552070","price":44.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p552070-coolant-filter-sca-plus.jpg?v=1793937756"},{"product_id":"p552071","title":"P552071 Coolant Filter, Spin-On SCA+ 4 Units","description":"\u003cp\u003eShort spin-on coolant filter that releases 4 units of Donaldson SCA+ supplemental coolant additive, listed against Cummins 3315116 and 299080. It covers Caterpillar 3406E and C15 and Cummins ISL, ISC, ISM, N14 and M11 engines in trucks, tractors and excavators.\u003c\/p\u003e\n\u003cp\u003eSCA+ is Donaldson's improved-protection chemistry. Nitrite and molybdate protect against cavitation erosion and liner pitting, a phosphate buffer holds the pH so the coolant does not turn acidic, silicate protects iron and aluminium, and tolyltriazole plates copper and brass parts. Donaldson rates SCA+ as a substitute for DCA4 and BTA Plus filters.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. At each filter change, Donaldson's coolant service guide uses 4 units for systems of 22.7 to 37.8 L on 375 to 625-hour service intervals, 41.6 to 46.7 L systems on 250 to 375-hour intervals, and 60.6 to 75.7 L systems on 250-hour intervals. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before you choose a unit count.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 544 fitments, led by trucks, then tractors, engine-only entries, tracked and wheeled excavators, mobile cranes, wheel loaders and combines. Peterbilt is the largest make, followed by New Holland, Kenworth, Liebherr, Cummins, Ford, Freightliner, Komatsu, Case IH and Grove. Engines include the Caterpillar 3406E, C15, C13 and C12, the Cummins ISL, ISC, ISM, N14, M11, 6CT8.3 and ISB6.7, and the Liebherr D924T-E.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 63 OEM and aftermarket brands, including Cummins 3315116 and 299080, John Deere RE42052, Case IH 1822627C1, New Holland 86990977, Caterpillar 2266565 and Volvo 85114065. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025131532367,"sku":"P552071","price":28.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p552071-coolant-filter-sca-plus.jpg?v=1793937753"},{"product_id":"p552072","title":"P552072 Coolant Filter, Spin-On SCA+ 6 Units","description":"\u003cp\u003eShort spin-on coolant filter that releases 6 units of Donaldson SCA+ supplemental coolant additive, listed against Cummins 3318201. It covers Komatsu dozers, graders and wheel loaders, John Deere and Timberjack forestry machines and Cummins 6CTA8.3 engines.\u003c\/p\u003e\n\u003cp\u003eSCA+ is Donaldson's improved-protection chemistry. Nitrite and molybdate protect against cavitation erosion and liner pitting, a phosphate buffer holds the pH so the coolant does not turn acidic, silicate protects iron and aluminium, and tolyltriazole plates copper and brass parts. Donaldson rates SCA+ as a substitute for DCA4 and BTA Plus filters.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. At each filter change, Donaldson's coolant service guide uses 6 units for 41.6 to 46.7 L cooling systems on 500-hour service intervals and 60.6 to 75.7 L systems on 375-hour intervals. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before you choose a unit count.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 57 fitments, led by trucks, wheel loaders, tracked dozers, graders, sprayers and feller bunchers. Komatsu, Volkswagen and John Deere are the largest makes, followed by Ag-Chem and Kawasaki. Engines include the Cummins 6CTA8.3, 6CTAA8.3 and QSK19, the MWM D229-6, the Komatsu S6D114E and SAA6D107E, and the John Deere 6081.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 22 OEM and aftermarket brands, including Cummins 3318201 and 3305368, Komatsu 6742013970, John Deere F434679, Hough 1257937H1 and Volvo 8228958. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025139822671,"sku":"P552072","price":39.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p552072-coolant-filter-sca-plus.jpg?v=1793937749"},{"product_id":"p552073","title":"P552073 Coolant Filter, Spin-On SCA+ 8 Units","description":"\u003cp\u003eSpin-on coolant filter that releases 8 units of Donaldson SCA+ supplemental coolant additive, listed against Cummins 3315115 and cross-referenced to WF2073. It covers Liebherr excavators and cranes, Komatsu machines and UD trucks.\u003c\/p\u003e\n\u003cp\u003eSCA+ is Donaldson's improved-protection chemistry. Nitrite and molybdate protect against cavitation erosion and liner pitting, a phosphate buffer holds the pH so the coolant does not turn acidic, silicate protects iron and aluminium, and tolyltriazole plates copper and brass parts. Donaldson rates SCA+ as a substitute for DCA4 and BTA Plus filters.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. At each filter change, Donaldson's coolant service guide uses 8 units for 41.6 to 46.7 L cooling systems on 625-hour service intervals and 60.6 to 75.7 L systems on 500-hour intervals. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before you choose a unit count.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eCummins 3315115 is listed against both \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e and this filter: one is SCA, the other SCA+. Choose by the chemistry your coolant programme runs, not by the OEM number alone.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 120 fitments, led by trucks, tracked excavators, tracked tractors, wheel loaders, dozers, graders and mobile cranes. Liebherr is the largest make, followed by Komatsu, UD, Hyundai, New Holland, John Deere, Nissan and Terex. Engines include the Cummins 6CT8.3, M11, ISB and KT38, the Nissan FE6T, FE6TA and NE6TA, the Komatsu SA6D114E and the Liebherr D926TI-E, D934LA6 and D936LA6.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 54 OEM and aftermarket brands, including Cummins 3315115 and 4058964, John Deere WF2073 and AT300538, Komatsu 6742013980, Liebherr 7367052, UD FL91599003 and Volvo 991215115. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025147654223,"sku":"P552073","price":38.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p552073-coolant-filter-sca-plus.jpg?v=1793937745"},{"product_id":"p552074","title":"P552074 Coolant Filter, Spin-On SCA+ 12 Units","description":"\u003cp\u003eSpin-on coolant filter that releases 12 units of Donaldson SCA+ supplemental coolant additive, listed against Cummins 3316053 and cross-referenced to WF2074. It covers Hitachi and Hyundai excavators and New Holland, AGCO and McCormick tractors and combines.\u003c\/p\u003e\n\u003cp\u003eSCA+ is Donaldson's improved-protection chemistry. Nitrite and molybdate protect against cavitation erosion and liner pitting, a phosphate buffer holds the pH so the coolant does not turn acidic, silicate protects iron and aluminium, and tolyltriazole plates copper and brass parts. Donaldson rates SCA+ as a substitute for DCA4 and BTA Plus filters.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. At each filter change, Donaldson's coolant service guide uses 12 units for 60.6 to 75.7 L cooling systems on 625-hour service intervals. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before you choose a unit count.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eCummins 3316053 is listed against both \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e and this filter: one is SCA, the other SCA+. Choose by the chemistry your coolant programme runs, not by the OEM number alone.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 86 fitments, led by tracked excavators, tractors, combines and wheel loaders. Hitachi, New Holland and Hyundai are the largest makes, followed by AGCO, McCormick and Versatile. Engines include the Cummins QSC8.3, N14C, NTA855, QSM11, QSL9, LTA10 and KTA50 and the New Holland GSD675T.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 25 OEM and aftermarket brands, including Cummins 3316053 and 3100307, Komatsu CUWF2074 and 6742013990, Hitachi 4299640, JCB 02910551, Hyundai 11E170320 and New Holland 861361. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025150472271,"sku":"P552074","price":41.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p552074-coolant-filter-sca-plus.jpg?v=1793937741"},{"product_id":"p552075","title":"P552075 Coolant Filter, Spin-On SCA+ 15 Units","description":"\u003cp\u003eSpin-on coolant filter that releases 15 units of Donaldson SCA+ supplemental coolant additive, listed against Cummins 3318318 and cross-referenced to WF2075. It covers Caterpillar 3406E trucks, Case IH tractors and Euclid and Terex haul trucks.\u003c\/p\u003e\n\u003cp\u003eSCA+ is Donaldson's improved-protection chemistry. Nitrite and molybdate protect against cavitation erosion and liner pitting, a phosphate buffer holds the pH so the coolant does not turn acidic, silicate protects iron and aluminium, and tolyltriazole plates copper and brass parts. Donaldson rates SCA+ as a substitute for DCA4 and BTA Plus filters.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. Donaldson's coolant service guide stops at 12 units, for a 60.6 to 75.7 L system on a 625-hour interval, so a 15-unit filter is for bigger cooling systems. Fit it where the engine or equipment maker calls for 15 units rather than going by thread and size. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before the change.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eCummins 3318318 is listed against both \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e and this filter: one is SCA, the other SCA+. Choose by the chemistry your coolant programme runs, not by the OEM number alone.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 193 fitments, led by trucks, tractors, haul trucks, tracked excavators, dump trucks and wheel loaders. Peterbilt and Case IH are the largest makes, followed by Hitachi, Euclid, Ford, International, Terex and XCMG. Engines include the Caterpillar 3406E, 3306C and 3176 and the Cummins N14, QSM11, ISM, 6CTAA8.3 and QSK19.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 61 OEM and aftermarket brands, including Cummins 3318318 and 299083, Hitachi WF2075, Komatsu 6216648280, Volvo 12565210, Doosan 47400020 and Liebherr 7367051. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025174818895,"sku":"P552075","price":47.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p552075-coolant-filter-sca-plus.jpg?v=1793937615"},{"product_id":"p552076","title":"P552076 Coolant Filter, Spin-On SCA+ 23 Units","description":"\u003cp\u003eLong spin-on coolant filter that releases 23 units of Donaldson SCA+ supplemental coolant additive, listed against Cummins 3318319 and 4058965. It is built for the big cooling systems on Cummins QSK19, QSK23 and KTA19 engines in mining excavators and haul trucks.\u003c\/p\u003e\n\u003cp\u003eSCA+ is Donaldson's improved-protection chemistry. Nitrite and molybdate protect against cavitation erosion and liner pitting, a phosphate buffer holds the pH so the coolant does not turn acidic, silicate protects iron and aluminium, and tolyltriazole plates copper and brass parts. Donaldson rates SCA+ as a substitute for DCA4 and BTA Plus filters.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. Donaldson's coolant service guide stops at 12 units, for a 60.6 to 75.7 L system on a 625-hour interval, so a 23-unit filter is for bigger cooling systems. Fit it where the engine or equipment maker calls for 23 units rather than going by thread and size. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before the change.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 60 fitments, led by tracked excavators, haul trucks, engine-only entries, trucks, dump trucks and compactors. Hitachi is the largest make, followed by Terex, Cummins, Volvo Construction, Komatsu, Euclid, Liebherr and Shantui. Engines include the Cummins QSK19, QSK23, KTA19, N14, VTA1710 and NTA855, the MTU 12V4000 and the Komatsu SSA12V159.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 31 OEM and aftermarket brands, including Cummins 3318319, 4058965 and 3100309, Komatsu 3305371, Hitachi 4266063, Liebherr 7367044, Terex 15275737 and Volvo 8228959. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025179537487,"sku":"P552076","price":72.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p552076-coolant-filter-sca-plus.jpg?v=1793937660"},{"product_id":"p554073","title":"P554073 Coolant Filter, Spin-On SCA 8 Units","description":"\u003cp\u003eSpin-on coolant filter that releases 8 units of Donaldson SCA supplemental coolant additive, listed against Cummins 3315115. It covers Komatsu dozers, excavators, loaders and graders and Cummins NH220, NT855 and VTA1710 engines.\u003c\/p\u003e\n\u003cp\u003eSCA is Donaldson's standard-protection chemistry. Nitrite protects against cavitation erosion and corrosion, a borate buffer holds the pH, silicate protects iron and aluminium, and benzotriazole plates copper and brass parts. Donaldson rates SCA as a substitute for DCA2 and BTE filters. If your engine is on a DCA4 or BTA Plus programme, use the matching SCA+ filter instead.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. At each filter change, Donaldson's coolant service guide uses 8 units for 41.6 to 46.7 L cooling systems on 625-hour service intervals and 60.6 to 75.7 L systems on 500-hour intervals. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before you choose a unit count.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eCummins 3315115 is listed against both this filter and \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e: one is SCA, the other SCA+. Choose by the chemistry your coolant programme runs, not by the OEM number alone.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 583 fitments, led by tracked dozers, trucks, tracked excavators, wheel loaders, graders, haul trucks and buses. Komatsu is by far the largest make, followed by Caterpillar, Scania, Hino and Allis-Chalmers. Engines include the Cummins NH220, VTA1710, NT855, NTA855, KTA2300, 6CT8.3 and ISB5.9, the Komatsu 6D125 and 6D105, and the Scania DS11 and DN11.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 85 OEM and aftermarket brands, including Cummins 3315115 and 299086, Komatsu 6004111180, Caterpillar 9Y4532, Hino 163041011, Scania 2303881 and Case IH 1329038C1. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025184682063,"sku":"P554073","price":37.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p554073-coolant-filter-sca.jpg?v=1793937604"},{"product_id":"p554074","title":"P554074 Coolant Filter, Spin-On SCA 12 Units","description":"\u003cp\u003eSpin-on coolant filter that releases 12 units of Donaldson SCA supplemental coolant additive, listed against Cummins 3316053. It is mainly a Komatsu filter, covering dozers, excavators, graders and loaders with the S6D125 and 6D125, plus Cummins NT855 engines.\u003c\/p\u003e\n\u003cp\u003eSCA is Donaldson's standard-protection chemistry. Nitrite protects against cavitation erosion and corrosion, a borate buffer holds the pH, silicate protects iron and aluminium, and benzotriazole plates copper and brass parts. Donaldson rates SCA as a substitute for DCA2 and BTE filters. If your engine is on a DCA4 or BTA Plus programme, use the matching SCA+ filter instead.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. At each filter change, Donaldson's coolant service guide uses 12 units for 60.6 to 75.7 L cooling systems on 625-hour service intervals. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before you choose a unit count.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eCummins 3316053 is listed against both this filter and \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e: one is SCA, the other SCA+. Choose by the chemistry your coolant programme runs, not by the OEM number alone.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 372 fitments, led by tracked dozers, tracked excavators, graders, wheel loaders, tractors, haul trucks and generator sets. Komatsu makes up most of the list, followed by John Deere, Hino, Champion and Caterpillar. Engines include the Komatsu S6D125-1, 6D125 and SA6D102E, the Cummins NT855, NTA855, N855 and LT10, and the Hino H07C.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 67 OEM and aftermarket brands, including Cummins 3316053 and 3315114, Komatsu 6004111150 and 6004111020, BEML 6004111151, John Deere AR94650 and Caterpillar 9Y4531. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025192022095,"sku":"P554074","price":55.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p554074-coolant-filter-sca.jpg?v=1793937600"},{"product_id":"p554075","title":"P554075 Coolant Filter, Spin-On SCA 15 Units","description":"\u003cp\u003eSpin-on coolant filter that releases 15 units of Donaldson SCA supplemental coolant additive, listed against Cummins 3318318. It covers Komatsu excavators, dump trucks and loaders and Cummins QSK19, KTA19 and N14 engines.\u003c\/p\u003e\n\u003cp\u003eSCA is Donaldson's standard-protection chemistry. Nitrite protects against cavitation erosion and corrosion, a borate buffer holds the pH, silicate protects iron and aluminium, and benzotriazole plates copper and brass parts. Donaldson rates SCA as a substitute for DCA2 and BTE filters. If your engine is on a DCA4 or BTA Plus programme, use the matching SCA+ filter instead.\u003c\/p\u003e\n\u003cp\u003eThe unit count is what decides the fit. Donaldson's coolant service guide stops at 12 units, for a 60.6 to 75.7 L system on a 625-hour interval, so a 15-unit filter is for bigger cooling systems. Fit it where the engine or equipment maker calls for 15 units rather than going by thread and size. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e before the change.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.\u003c\/p\u003e\n\u003cp\u003eCummins 3318318 is listed against both this filter and \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e: one is SCA, the other SCA+. Choose by the chemistry your coolant programme runs, not by the OEM number alone.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 147 fitments, led by tracked excavators, dump trucks, wheel loaders, tracked dozers, trucks and haul trucks. Komatsu is the largest make, followed by Caterpillar, Hitachi, Versatile and Terex. Engines include the Cummins QSK19, KTA19, N14, NTA855 and 6CT8.3, the Caterpillar 3406, 3408 and 3412TA, and the Komatsu SAA6D170.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 49 OEM and aftermarket brands, including Cummins 3318318 and 3316461, Komatsu 6004111161, Caterpillar 2266566 and 1W5518, Hitachi 4228689, Doosan 91008147 and Volvo 125652107. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025198936143,"sku":"P554075","price":61.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p554075-coolant-filter-sca.jpg?v=1793937597"},{"product_id":"p554685","title":"P554685 Coolant Filter, Spin-On No Additive, Standard Service","description":"\u003cp\u003eSpin-on coolant filter with no chemical additive, for standard service intervals. It covers Freightliner trucks with Mercedes-Benz MBE4000, Detroit Diesel Series 60 and Caterpillar C15 engines, and is cross-referenced to John Deere RE11992 and Cummins 3300721, the same OEM numbers as WF2077.\u003c\/p\u003e\n\u003cp\u003eA no-additive filter is the right choice when the cooling system already carries what it needs: systems topped up with liquid SCA, long-life coolants that call for no supplemental additive, or a system that has been over-charged and needs its additive level brought back down to normal. Donaldson says non-additive filters are not for water-only systems.\u003c\/p\u003e\n\u003cp\u003eLike most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler. Check the coolant with \u003ca href=\"\/products\/111943\"\u003eglycol and corrosion test strips\u003c\/a\u003e at each service so you know the protection is still there.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 202 fitments, led by trucks, then wheeled and tracked excavators, tractors, wheel loaders and scrapers. Freightliner is by far the largest make, followed by John Deere, Hino, Liebherr, Caterpillar and Western Star. Engines include the Mercedes-Benz MBE4000, the Caterpillar C15, C13, C12 and C9, the Detroit Diesel Series 60, the John Deere 6466A and 6619A, and the Deutz BF4M1013.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 44 OEM and aftermarket brands, including Cummins 3300721 and 3827423, John Deere RE11992, Detroit Diesel 23524403, Caterpillar 9Y4528, Hino 163041015 and Liebherr 7025830. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025205162063,"sku":"P554685","price":30.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p554685-coolant-filter-no-additive.jpg?v=1793937668"},{"product_id":"dbc4085","title":"DBC4085 Coolant Filter, Donaldson Blue No Additive, Extended Service","description":"\u003cp\u003eDonaldson Blue coolant filter with no chemical additive, for extended service coolant users. It covers DAF and PACCAR MX11 and MX13 trucks, Kenworth with the PACCAR PX7 and Cummins ISM, cross-referenced to DAF and PACCAR 1649751 and Cummins 3098690.\u003c\/p\u003e\n\u003cp\u003eDonaldson Blue non-additive filters are built to go the distance of your coolant. Instead of cellulose they use Synteq synthetic micro-fibreglass media, which is more durable over extended drain intervals while holding or improving efficiency and capacity, with lower restriction. Donaldson rates this filter at 99% efficiency at 22 micron.\u003c\/p\u003e\n\u003cp\u003eA no-additive filter is the right choice when the cooling system already carries what it needs: systems topped up with liquid SCA, long-life coolants that call for no supplemental additive, or a system that has been over-charged and needs its additive level brought back down to normal. Donaldson says non-additive filters are not for water-only systems.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 64 fitments, most of them trucks, plus excavators, buses, motorhomes and tracked dozers. DAF and Tatra are the largest makes, followed by International, Komatsu and Kenworth. Engines include the PACCAR MX11, MX13 and PX7, the DAF MX11 and MX13, the Cummins ISM and QSL9, and the Komatsu SAA6D140E-5.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service)\u003c\/li\u003e\n\u003cli\u003eAdditive replenishment: \u003ca href=\"\/products\/dbc4088\"\u003eDBC4088\u003c\/a\u003e (Donaldson Blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 11 OEM and aftermarket brands, including DAF and PACCAR 1649751, Cummins 3098690, XWF4245 and XWF4246, International 1833690C1, Komatsu 6004115110 and MTU 2043697. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025235243087,"sku":"DBC4085","price":76.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-dbc4085-donaldson-blue-coolant-filter.jpg?v=1793937588"},{"product_id":"dbc4088","title":"DBC4088 Coolant Filter, Donaldson Blue, Additive Replenishment","description":"\u003cp\u003eDonaldson Blue coolant filter with additive replenishment, for Freightliner, Western Star and Peterbilt trucks with Detroit Diesel Series 60, Caterpillar C15 and Cummins ISX engines. It is cross-referenced to Detroit Diesel 23516489 and Penray NF2088.\u003c\/p\u003e\n\u003cp\u003eInstead of releasing a full charge of additive at once, Donaldson Blue filters with additive replenishment technology release small amounts of time-release additive to keep the coolant healthy between services. Donaldson lists it in its SCA range and calls it a direct replacement for standard filters.\u003c\/p\u003e\n\u003cp\u003eThe media is Synteq synthetic micro-fibreglass, rated at 99% efficiency at 14 micron (SAE J1985). It holds up better than cellulose over extended intervals, with more capacity and lower restriction. Test the coolant with \u003ca href=\"\/products\/cc36089\"\u003eCC36089 test strips\u003c\/a\u003e at each service to confirm the additive level is holding.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists 27 fitments, almost all trucks, plus XCMG excavators. Freightliner is the largest make, followed by Western Star, Peterbilt and Sterling. Engines include the Detroit Diesel Series 60, the Caterpillar C15, C15 ACERT, C16, C12, 3406E and 3176B, the Cummins ISX, QSX15, M11 and L10, and the Mercedes-Benz MBE900.\u003c\/p\u003e\n\u003cp\u003eIt is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3\/8\" NPT ports and an 11\/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSCA+, 107 mm: \u003ca href=\"\/products\/p552070\"\u003eP552070\u003c\/a\u003e (2 units), \u003ca href=\"\/products\/p552071\"\u003eP552071\u003c\/a\u003e (4 units), \u003ca href=\"\/products\/p552072\"\u003eP552072\u003c\/a\u003e (6 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 136 mm: \u003ca href=\"\/products\/p552073\"\u003eP552073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p552074\"\u003eP552074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p552075\"\u003eP552075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eSCA+, 200 mm: \u003ca href=\"\/products\/p552076\"\u003eP552076\u003c\/a\u003e (23 units)\u003c\/li\u003e\n\u003cli\u003eSCA, 136 mm: \u003ca href=\"\/products\/p554073\"\u003eP554073\u003c\/a\u003e (8 units), \u003ca href=\"\/products\/p554074\"\u003eP554074\u003c\/a\u003e (12 units), \u003ca href=\"\/products\/p554075\"\u003eP554075\u003c\/a\u003e (15 units)\u003c\/li\u003e\n\u003cli\u003eNo additive: \u003ca href=\"\/products\/p554685\"\u003eP554685\u003c\/a\u003e (standard service), \u003ca href=\"\/products\/dbc4085\"\u003eDBC4085\u003c\/a\u003e (Donaldson Blue, extended service)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 13 OEM and aftermarket brands, including Detroit Diesel 23516489, Penray NF2088, Cummins 3098688 and XWF4242, Hyundai 11ND70211 and XCMG 800173077. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68025238290511,"sku":"DBC4088","price":174.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-dbc4088-donaldson-blue-coolant-filter.jpg?v=1793937583"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/WF2131.webp?v=1781693352","url":"https:\/\/geelongfiltersales.com.au\/collections\/coolant-filters.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}