{"title":"Engine Oils","description":"\u003cp\u003eEngine oils for petrol and diesel engines in cars, 4WDs, trucks, plant, tractors and small equipment. Synthetic, semi-synthetic and mineral oils sit here alongside heavy-duty diesel grades, monogrades and specialty oils for motorcycles, outboards and race engines. Choosing comes down to two things printed in the handbook: the SAE viscosity grade, such as 5W-30 or 15W-40, and the performance spec, written as an API category, an ACEA sequence or an engine maker's own approval code. Match both. An oil with the right viscosity but the wrong spec can still wear the engine faster, clog a diesel particulate filter early or give a warranty assessor a reason to say no. Start with the oil type that suits the engine, then narrow it down by grade.\u003c\/p\u003e","products":[{"product_id":"1021-20","title":"1021.20 DuraBlend 10W30 Semi Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline DuraBlend 10W30 is a semi-synthetic multigrade engine oil for modern petrol engines to API SP and ILSAC GF-6A. Its part-synthetic base improves cold-start flow and holds a stable film at temperature, protecting against wear and deposits through everyday driving. The 20L pack is the practical choice for workshops and operators servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA modern semi-synthetic for petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost engine wear happens at two moments: the first seconds after a cold start, before oil reaches the top end, and again under sustained load when hot. A semi-synthetic 10W30 covers both, flowing faster on cold start than a mineral oil and holding a stable film at temperature, all while meeting the latest API SP and ILSAC GF-6A standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection at start-up and under load\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost engine wear happens in the first seconds after a cold start, before oil reaches the top end, and again under sustained load when hot. The improved cold flow of the semi-synthetic base gets oil circulating faster on start-up, and the stable hot film protects under load. The API SP additive package adds protection against low-speed pre-ignition (LSPI) and timing-chain wear that matter on modern engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent-standard performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeeting API SP and ILSAC GF-6A means it carries the latest petrol engine protection, including deposit and wear control that keep the engine clean and efficient between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol passenger cars and light commercials that specify a 10W30 multigrade. Confirm the grade your engine calls for before selecting, since modern engines are designed around a particular viscosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 10W30 semi-synthetic suits modern petrol engines that specify this grade and want strong protection without the cost of a full synthetic, so check your engine's grade and specification before selecting. Follow the service schedule for oil and filter changes, and shorten the interval for stop-start city driving, short trips or towing, which work an oil harder than steady highway running. Top up with the same grade, and there is no issue moving between a semi-synthetic and a synthetic of the same specification at a change. Meeting the latest API SP and ILSAC GF-6A, it carries current protection against wear, deposits and low-speed pre-ignition on modern engines.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478415466575,"sku":"1021.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1021-20-durablend-10w30-semi-synthetic-engine-oil-front-view.webp?v=1793486720"},{"product_id":"1022-20","title":"1022.20 DuraBlend 10W40 Semi Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline DuraBlend 10W40 is a semi-synthetic multigrade engine oil for petrol engines needing a heavier 40 hot grade, carrying ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals. Its part-synthetic base improves cold-start flow while the 40 film holds up under sustained heat and load. The 20L pack is the practical workshop choice for regular servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier semi-synthetic for engines that specify a 40\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome engines are built around a heavier hot film, either for their tolerances or the loads they run, and specifying a 40 grade holds that film where a lighter oil would thin. This semi-synthetic 10W40 delivers it, flowing well on cold start while carrying ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals for the engines that call for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the 40 grade and the European approvals matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome engines are designed around a heavier hot film, either for their tolerances or the loads they run, and specifying a 40 grade holds that film where a lighter oil would thin. DuraBlend 10W40 carries ACEA A3\/B4 along with Volkswagen and Mercedes-Benz approvals, which are the standards European petrol engines of this type are built around, so it meets the requirement rather than just the viscosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReliable everyday protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe semi-synthetic base and additive package deliver dependable cold-start flow, deposit control and wear protection across the duty cycle, keeping the engine clean and protected between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol cars and light commercials that call for a 10W40 multigrade, particularly European models specifying ACEA A3\/B4. Confirm the grade and any approval your engine requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 10W40 grade and its European approvals point to engines designed around a heavier hot film, so confirm your engine specifies a 10W40 and any ACEA A3\/B4 or maker approval before selecting rather than substituting a lighter oil. Follow the service schedule, and shorten the interval for stop-start, short-trip or towing duty that works the oil harder. Top up with the same grade, and moving between a semi-synthetic and a synthetic of the same specification at a change is fine. The heavier film suits engines that run hotter or were built for a 40 grade, holding protection where a 30 would thin, while the additive package keeps the engine clean between services.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478423986255,"sku":"1022.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1022-20-durablend-10w40-20l.webp?v=1785300645"},{"product_id":"1045-05","title":"1045.05 Racing Formula 50 25W60 Mineral Engine Oil 5L","description":"\u003cp\u003eValvoline Racing Formula 50 is a 25W60 mineral engine oil built for high oil temperatures, laying down a heavy 60-weight film for engines that run hot and hard. That thick, stable film holds oil pressure and protects bearings in motorsport, high-performance and high-clearance builds where a lighter oil would thin out. Meets API SJ\/CD. Supplied in a 5L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavy film for engines that run hot and hard\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs oil temperature climbs, viscosity drops, and a standard road oil can become too thin to keep bearing surfaces apart under sustained high load and rpm. A 25W60 mineral oil answers that with a heavy 60-weight film, holding oil pressure and protection in engines that run hot and hard, from motorsport to high-clearance builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the 60 grade matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs oil temperature climbs, viscosity drops, and a standard road oil can become too thin to keep bearing surfaces apart under sustained high load and rpm. The 25W60 grade lays down a much heavier film at operating temperature, which maintains oil pressure and a protective barrier in the bearings when the engine is being worked. The mineral formulation carries the anti-wear and detergent additives to back that up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for performance use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets API SJ and CD, and its high-temperature focus makes it a specialist choice rather than a general road oil. In high-clearance and older high-output engines, the heavier film also helps take up wider tolerances and hold pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits motorsport, high-performance and older high-output petrol engines that run at high oil temperatures. It is chosen specifically where a thick, stable film is the priority, so confirm the engine builder's or manufacturer's grade recommendation before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing a specialist high-temperature oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRacing Formula 50 is a specialist oil chosen for high oil temperatures and looser clearances, so it belongs in engines and applications that genuinely call for a heavy film, not as a general road oil. In a modern engine designed around a light grade, a 25W60 would slow cold flow and hurt economy, so always follow the engine builder's or manufacturer's recommendation. In the motorsport, high-performance and high-clearance builds it suits, the heavy film holds oil pressure and protection when the engine is worked hard and hot. Change it in line with race or event schedules, since hard use loads the oil quickly, and warm the engine before pushing it.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478432112719,"sku":"1045.05","price":69.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1045-05-racing-formula-50-25w60-5l.webp?v=1785300646"},{"product_id":"1087-10","title":"1087.10 Diesel Extra 15W40 CI-4\/SL E7 Engine Oil 10L","description":"\u003cp\u003eValvoline Diesel Extra 15W40 is a heavy-duty diesel engine oil for older diesels and mixed fleets, meeting API CI-4\/SL and ACEA E7. It manages the high soot loads of pre-DPF engines, resists viscosity breakdown and keeps combustion deposits under control across the service interval. The 10L pack is a convenient size for regular top-ups and light fleet servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for older diesels and mixed fleets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear, and managing that soot is the whole job for an oil like this. Carrying API CI-4\/SL and ACEA E7, it is built around strong detergency for pre-DPF engines and the mixed diesel and petrol fleets that run alongside them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSoot handling is the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear. The CI-4 and E7 formulation is built around strong detergency and dispersancy that keep that soot in suspension and control the viscosity rise it causes, so the oil holds its grade and keeps pistons, rings and bearings clean through the drain interval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals for the older fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of approvals suited to pre-DPF engines, including Cummins CES 20076 to 20078, Volvo VDS-3, Mack EO-M Plus, MAN 3275 and Renault RLD-2. That coverage is what lets a single oil serve a mixed older fleet with confidence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiesel Extra or a modern low-SAPS oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiesel Extra is a high-SAPS oil, which suits older diesels but is not appropriate for engines fitted with a diesel particulate filter (DPF) or SCR system, where the ash would clog the hardware. Choose Diesel Extra for older, pre-DPF engines, and a low-SAPS CK-4 oil for any modern emission-controlled diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and the right application\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn older, high-soot diesels, oil and filter changes on the manufacturer's schedule matter more than usual, because soot loading and acid build-up are what wear these engines, and a fresh charge resets both. Where duty is severe, such as high-idle or dusty work, shortening the interval pays off. The one firm limit is emissions hardware: as a high-SAPS oil, Diesel Extra is not for engines with a diesel particulate filter or SCR system, so on any modern emission-controlled diesel choose a low-SAPS CK-4 oil instead. For the older, pre-DPF fleet it is designed for, it is a robust, cost-effective choice that keeps engines clean and protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478440206415,"sku":"1087.10","price":100.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1087-10-diesel-extra-15w40-10l.webp?v=1785300649"},{"product_id":"1087-20","title":"1087.20 Diesel Extra 15W40 CI-4\/SL E7 Engine Oil 20L","description":"\u003cp\u003eValvoline Diesel Extra 15W40 is a heavy-duty diesel engine oil for older diesels and mixed diesel and petrol fleets, carrying API CI-4\/SL and ACEA E7. Its robust detergent and dispersant package copes with the heavy soot of pre-DPF engines while holding viscosity control through long, hard shifts. The 20L pack is the everyday workshop choice for scheduled oil changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for older diesels and mixed fleets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear, and managing that soot is the whole job for an oil like this. Carrying API CI-4\/SL and ACEA E7, it is built around strong detergency for pre-DPF engines and the mixed diesel and petrol fleets that run alongside them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSoot handling is the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear. The CI-4 and E7 formulation is built around strong detergency and dispersancy that keep that soot in suspension and control the viscosity rise it causes, so the oil holds its grade and keeps pistons, rings and bearings clean through the drain interval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals for the older fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of approvals suited to pre-DPF engines, including Cummins CES 20076 to 20078, Volvo VDS-3, Mack EO-M Plus, MAN 3275 and Renault RLD-2. That coverage is what lets a single oil serve a mixed older fleet with confidence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiesel Extra or a modern low-SAPS oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiesel Extra is a high-SAPS oil, which suits older diesels but is not appropriate for engines fitted with a diesel particulate filter (DPF) or SCR system, where the ash would clog the hardware. Choose Diesel Extra for older, pre-DPF engines, and a low-SAPS CK-4 oil for any modern emission-controlled diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and the right application\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn older, high-soot diesels, oil and filter changes on the manufacturer's schedule matter more than usual, because soot loading and acid build-up are what wear these engines, and a fresh charge resets both. Where duty is severe, such as high-idle or dusty work, shortening the interval pays off. The one firm limit is emissions hardware: as a high-SAPS oil, Diesel Extra is not for engines with a diesel particulate filter or SCR system, so on any modern emission-controlled diesel choose a low-SAPS CK-4 oil instead. For the older, pre-DPF fleet it is designed for, it is a robust, cost-effective choice that keeps engines clean and protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478447448143,"sku":"1087.20","price":179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1087-20-diesel-extra-15w40-20l.webp?v=1785300650"},{"product_id":"1104-04","title":"1104.04 2 Stroke Outboard Engine Oil 4L","description":"\u003cp\u003eValvoline 2 Stroke Outboard is a two-stroke oil for water-cooled marine outboard engines, blended to burn low-smoke in a cooler-running marine engine and to protect against the corrosion that comes with a wet operating environment. Meeting NMMA TC-W3, it mixes cleanly with fuel and safeguards the crank and cylinder. Supplied in a 4L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA two-stroke oil made for the water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMarine two-strokes differ from land equipment in two ways that matter: they run cooler thanks to water cooling, and they live in a corrosive, wet environment. This two-stroke oil is blended for exactly those conditions, burning low-smoke in a cooler-running engine while protecting the internals against the corrosion salt and moisture bring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLow smoke and corrosion protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the oil is burnt with the fuel, it is formulated to burn low-smoke in a cooler-running marine engine, which keeps the engine clean and the exhaust clear. Just as important, it carries a marine additive package that protects the crank, bearings and cylinder against the corrosion that a wet, salt-laden environment drives. It meets NMMA TC-W3, the recognised water-cooled two-stroke standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMix to the maker's ratio\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo-stroke performance depends on mixing the oil with fuel at the ratio the engine maker specifies, which gives the right lubrication without over-oiling and fouling. Following that ratio is what delivers clean running and full protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits two-stroke outboard motors on boats and tinnies in fresh and salt water. Confirm your engine calls for a TC-W3 two-stroke oil and mix to the specified ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMixing and off-season care\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo-stroke outboard performance depends on the fuel mix, so blend the oil with fresh petrol at the ratio the engine maker specifies, or set an oil-injection system correctly, since too little oil starves the engine and too much fouls plugs and ports. Use fresh mix, as it separates and stales over time. In the marine environment, corrosion protection matters as much as lubrication, which is why a TC-W3 marine oil is used rather than a land two-stroke oil. Before laying the engine up for the off-season, run it and fog it per the maker's advice so internals stay protected against the moisture that a stored marine engine faces.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478485164111,"sku":"1104.04","price":52.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1104-04-2-stroke-outboard-engine-oil-4l.jpg?v=1793486720"},{"product_id":"1111-04","title":"1111.04 4 Stroke 10W40 Semi Synthetic Outboard Engine Oil 4L","description":"\u003cp\u003eValvoline 4 Stroke Outboard 10W40 is a semi-synthetic oil for four-stroke marine outboard engines. The 10W40 multigrade covers cold start and holds its film at marine operating temperature, while a dedicated marine additive package guards against the corrosion a water environment brings. Meets NMMA FC-W. Supplied in a 4L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA four-stroke oil built for marine conditions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA four-stroke outboard carries its oil in a sump like a car engine, but it works in a wet, corrosive environment and often sits unused between trips, which is where a marine-specific oil earns its place. This semi-synthetic 10W40 covers cold start and holds a stable film at marine operating temperature, with a dedicated corrosion-fighting additive package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMultigrade protection with marine additives\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 10W40 multigrade covers cold start and holds a stable film at marine operating temperature, while the semi-synthetic base improves oxidation resistance over a mineral oil. A dedicated marine additive package guards against the corrosion a water environment brings, protecting the engine both while running and during the idle periods between outings. It meets NMMA FC-W, the recognised four-stroke outboard standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right oil for the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMarine four-strokes are specified around FC-W oils for a reason, and using a marine-rated oil rather than a general automotive oil is what delivers the corrosion protection the engine needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits four-stroke outboard motors on recreational and working boats. Confirm your engine calls for an FC-W 10W40 before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eServicing a marine four-stroke\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA four-stroke outboard carries its oil in a sump, so check the level regularly and change the oil and filter at the engine maker's interval, which is often set by time as much as hours given how outboards are used seasonally. Marine engines idle and run in a corrosive, humid environment, which is why an FC-W marine oil is specified rather than an automotive oil, and using the correct grade protects the engine both running and during lay-up. Before the off-season, change the oil so the engine sits on fresh oil rather than acidic used oil, and follow the maker's storage advice to guard against moisture and corrosion.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478492831823,"sku":"1111.04","price":51.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1111-04-10w40-semi-synthetic-outboard-engine-oil-4l.webp?v=1785300659"},{"product_id":"1155-06","title":"1155.06 SynPower 5W40 Synthetic Engine Oil 6L","description":"\u003cp\u003eValvoline SynPower 5W40 is a full synthetic engine oil for petrol and diesel engines wanting strong protection across a wide temperature range. The 5W grade pumps fast on start-up while the 40 hot grade holds a firm film under sustained load and heat, with wide European coverage including VW, Mercedes-Benz and Renault. Meets ACEA A3\/B4 and API SP. The 6L pack suits a single-vehicle service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA versatile full synthetic for petrol and diesel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA full synthetic base gives better oxidation resistance, cleaner running and more stable viscosity than a mineral or semi-synthetic oil, which is what lets one 5W40 cover a broad mix of vehicles. The 5W cold grade pumps fast on start-up while the 40 hot grade holds a firm film under sustained load and heat, suiting both petrol and diesel engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold flow and hot-film strength\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 5W cold grade pumps fast on start-up to protect the engine before pressure builds, while the 40 hot grade holds a firm film under sustained load and heat. That balance suits everything from a European turbo-diesel to a hard-driven petrol engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad OEM approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA A3\/B4 and API SP, with approvals including Volkswagen 502.00 and 505.00, Mercedes-Benz 229.1, Renault RN700 and General Motors, so it matches the requirement for a wide range of European and Asian vehicles rather than just the grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits European and Asian petrol and diesel cars specifying a 5W40 full synthetic. Confirm the grade and any approval your engine requires before selecting, since some engines call for a specific low-SAPS oil instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSynPower 5W40 suits European and Asian petrol and diesel cars that specify a 5W40, so confirm your engine's grade and any maker approval such as VW 502\/505 or Mercedes-Benz before selecting. Follow the service schedule for oil and filter changes, and shorten it for stop-start, short-trip or towing duty. Top up with the same grade, and moving between synthetic oils of the same specification at a change is fine. As a full synthetic it resists oxidation and holds its grade longer than a mineral or semi-synthetic oil, which is what keeps a hard-worked engine clean and protected across a wide temperature range.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478539788367,"sku":"1155.06","price":87.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1155-06-synpower-5w40-synthetic-engine-oil-6l.webp?v=1785300663"},{"product_id":"1165-06","title":"1165.06 SynPower 10W50 Synthetic Engine Oil 6L","description":"\u003cp\u003eValvoline SynPower 10W50 is a full synthetic engine oil with a heavy 50 hot grade for engines that run hot and hard, including performance and track use. It holds a thick, stable film where a lighter oil thins out under sustained high temperature and rpm, protecting bearings and valvetrain when the engine is working. Meets ACEA A3\/B4, API SN and SP. Supplied in a 6L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavy synthetic film for hard-run engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnder race or high-performance conditions a standard oil grade can become too thin to keep bearing surfaces apart, which is exactly when a heavy synthetic film earns its place. This full synthetic 10W50 holds a thick, stable film where a lighter oil thins out under sustained high temperature and rpm, protecting engines that run hot and hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the 50 grade matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOil thins as it heats, and under race or high-performance conditions a standard grade can become too thin to keep bearing surfaces apart. The 50 hot grade lays down a heavier film that holds oil pressure and protection when the engine is worked, while the synthetic base resists the oxidation and breakdown that heat drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStrong protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA A3\/B4, API SN and SP, carrying robust wear and deposit control for demanding use alongside the heavier film.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits performance and track-driven petrol engines that need a heavy synthetic film, and engines specifying a 10W50. Confirm the grade the engine calls for before selecting, since a heavier oil is not appropriate for engines designed around a lighter grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing a heavy performance grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 10W50 full synthetic is chosen for engines that run hot and hard or specify a heavy grade, so it belongs where that film is genuinely needed rather than as a general road oil, and a modern engine built around a light grade should stick to its specification. Follow the service schedule, and for track use shorten the interval, since hard running loads the oil quickly. Warm the engine before pushing it so the oil reaches full flow. In performance and track-driven engines, the heavy synthetic film holds oil pressure and protection under sustained high temperature and rpm, exactly where a lighter oil would thin and let wear through.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478553092175,"sku":"1165.06","price":87.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1165-06-synpower-10w50-synthetic-engine-oil-6l.webp?v=1785300666"},{"product_id":"1166-05","title":"1166.05 VR1 Semi Synthetic Racing Oil 10W40 5L","description":"\u003cp\u003eValvoline VR1 Racing 10W40 is a semi-synthetic racing oil with a raised anti-wear (ZDDP) additive level for high-load valvetrains. The extra zinc and phosphorus protect flat-tappet cams and performance engines that push more load through the oil film than a standard road engine, while the 10W40 grade covers cold start and holds up under race heat. Meets API SJ\/CD. Supplied in a 5L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtra anti-wear for high-load valvetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlat-tappet camshafts and built engines push far more load through the oil film at the cam and lifter than a modern road engine, and that is precisely where extra protection is needed. This semi-synthetic racing oil is built around a raised anti-wear (ZDDP) additive level to guard those high-load valvetrain surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the raised ZDDP level matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc and phosphorus anti-wear chemistry (ZDDP) forms a sacrificial protective layer at high-contact points like the cam lobe and lifter. Modern low-SAPS road oils deliberately run lower ZDDP to protect emissions hardware, which can leave a high-load flat-tappet valvetrain short of protection. VR1 carries a higher ZDDP level to guard those surfaces, while the semi-synthetic base gives better oxidation resistance than a straight mineral oil under race heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad-temperature performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 10W40 grade covers cold start and holds a firm film at operating temperature, so it protects from the first turn through to sustained hard running. It meets API SJ and CD.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits classic muscle, race and high-performance engines with high-load valvetrains, particularly flat-tappet cam engines that benefit from the higher anti-wear level. It is not intended for modern engines that specify a low-SAPS emissions-compatible oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the anti-wear level matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe raised zinc and phosphorus level is the reason to choose VR1 for a high-load, flat-tappet valvetrain: modern low-SAPS road oils run reduced anti-wear additive to protect emissions hardware, which can leave an older or built engine short of protection at the cam and lifter. That same higher additive level means it is not intended for modern engines with catalysts and particulate filters that require a low-SAPS oil, so match the oil to the engine. In classic, race and performance engines with high-load valvetrains, the extra protection is exactly what guards the cam during break-in and hard running. Change it in line with hard-use schedules rather than stretching intervals.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478579699791,"sku":"1166.05","price":74.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1166-05-vr1-semi-synthetic-racing-oil-10w40-5l.webp?v=1785300668"},{"product_id":"1184-20","title":"1184.20 SynPower XL-III C3 5W30 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower XL-III C3 5W30 is a full synthetic, mid-SAPS oil built to ACEA C3 for late-model European vehicles, with approvals including VW 504.00\/507.00, BMW LL-04, Mercedes-Benz 229.51 and Porsche C30. It protects DPFs and catalysts, supports extended drain intervals and holds a robust film. The 20L pack suits workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA long-life oil for late-model European engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReduced sulphated ash, phosphorus and sulphur, the mid-SAPS chemistry behind an ACEA C3 oil, is what keeps a diesel particulate filter or catalyst clear over its life. This full synthetic C3 5W30 balances that low-ash chemistry with a robust film and strong wear protection, making it a genuine long-life oil for late-model European vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMid-SAPS protection for emissions hardware\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMid-SAPS means reduced sulphated ash, phosphorus and sulphur, which is what keeps a diesel particulate filter (DPF) or three-way catalyst clear over its life. The C3 formulation balances that low-ash chemistry with strong wear protection and oxidation resistance, so the engine and the emissions system are looked after together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTop-tier approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries premium approvals including Volkswagen 504.00 and 507.00, BMW LL-04, Mercedes-Benz 229.51 and Porsche C30, the standards VW Group and other European engines are engineered around for long-drain service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits VW Group and other European petrol and diesel cars specifying a 504.00\/507.00 or equivalent C3 5W30. Confirm the exact approval your engine requires before selecting, since C3 oils are matched closely to specific engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the exact approval matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eC3 long-life oils are matched closely to specific engines, so the approval on the container, such as VW 504.00\/507.00, BMW LL-04 or Porsche C30, is what confirms the oil is right for your vehicle rather than the viscosity alone. Using the correct approval protects both the engine and its diesel particulate filter or catalyst, and supports the long service intervals these vehicles run. Follow the maker's schedule, top up with the same specification, and do not substitute a non-approved oil to save a step. In the right vehicle, this oil delivers genuine long-drain protection while keeping the emissions hardware clear over its life.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478590054479,"sku":"1184.20","price":329.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1184-20-synpower-xl-iii-c3-5w30-synthetic-engine-oil-20l.webp?v=1785300669"},{"product_id":"1186-20","title":"1186.20 SynPower MST C3 5W30 Synthetic Oil 20L","description":"\u003cp\u003eValvoline SynPower MST C3 5W30 is a full synthetic, mid-SAPS engine oil for modern petrol and diesel engines with particulate filters and catalysts, meeting ACEA C2\/C3 and the latest API SP with BMW LL-04, Mercedes-Benz and GM dexos2 approvals. Its low-ash chemistry protects the emissions system while the 5W30 grade balances cold flow and hot-film stability. The 20L pack suits workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA mid-SAPS C3 oil for modern engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA modern engine's particulate filter or catalyst is expensive and sensitive to oil ash, which is why a mid-SAPS oil exists: to keep that hardware clear while still protecting the engine. This full synthetic ACEA C3 5W30 does both, with fast cold flow and a stable film at temperature for modern petrol and diesel engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtecting the engine and the emissions system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA modern engine's diesel particulate filter (DPF) or three-way catalyst is expensive and sensitive to oil ash, so the mid-SAPS chemistry is there to keep that hardware clear over its life. The C3 formulation delivers that alongside strong wear protection and cleanliness, so both the engine internals and the emissions system are looked after.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA C3 with approvals including BMW LL-04, Mercedes-Benz 229.31 and 229.51 and General Motors dexos2, the standards these European engines are built around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits European petrol and diesel cars specifying an ACEA C3 5W30. Confirm the exact approval your engine requires before selecting, since C3 oils are matched closely to specific engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the specification right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eC3 mid-SAPS oils are matched to particular engines, so check the approval your vehicle needs, such as BMW LL-04, Mercedes-Benz 229.31\/229.51 or GM dexos2, rather than choosing on viscosity alone. The mid-SAPS chemistry is there to protect the diesel particulate filter or catalyst, so using a non-C3 oil in one of these engines risks the emissions hardware. Follow the maker's service schedule, top up with the same specification, and keep to approved oils. In the right vehicle, this oil balances aftertreatment protection with strong wear control and cleanliness, which is exactly what a modern European petrol or diesel engine is designed around.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478597591119,"sku":"1186.20","price":259.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1186-20-synpower-5w30-mst-c3-engine-oil-20l.jpg?v=1793486720"},{"product_id":"1281-05","title":"1281.05 Premium Mono 30 Engine Oil 5L","description":"\u003cp\u003eValvoline Premium Mono 30 is an SAE 30 monograde engine oil engineered for high-speed two-stroke diesel engines and equipment specifying an SAE 30. Its zinc anti-wear technology and deposit control keep engines clean and protected against corrosive combustion gases. The 5L pack suits single-machine top-ups and smaller equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn SAE 30 monograde for demanding engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA monograde holds a single viscosity rather than spanning a range, which suits engines and equipment designed around that fixed grade. This SAE 30 monograde is engineered for high-speed two-stroke diesel engines and equipment that specifies an SAE 30, managing piston deposits and corrosive combustion gases with zinc anti-wear protection behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-speed diesels build piston deposits and face corrosive combustion gases, and this oil is formulated to manage both. Advanced zinc anti-wear technology protects the bearings and cylinders, while the detergent system keeps deposits down so the engine stays clean under hard, hot running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right specification\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Allison C3, API CF-2 and SG and Caterpillar TO-2, covering two-stroke diesel engine use as well as some transmission and drivetrain applications that call for an SAE 30 monograde. Matching the grade and specification to the equipment is what delivers full protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits two-stroke diesel engines and older equipment specifying an SAE 30 monograde. Confirm the grade and specification your equipment requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 30 monograde is specified for particular two-stroke diesel engines and for some transmission and drivetrain uses that call for it, so check the equipment maker's requirement before using it as an engine oil, gearbox oil or hydraulic fluid. Its Allison C3, API CF-2 and SG and Caterpillar TO-2 coverage reflects that range of uses. Follow the service interval, keep top-ups clean and to the same grade, and change on schedule since hard-run engines and drivetrains load the oil. Used where an SAE 30 monograde is called for, the zinc anti-wear protection and deposit control keep the engine or drivetrain clean and protected under demanding conditions.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478715523151,"sku":"1281.05","price":56.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1281-05-premium-mono-30-engine-oil-5l.webp?v=1785300686"},{"product_id":"1282-05","title":"1282.05 Premium Mono 40 Engine Oil 5L","description":"\u003cp\u003eValvoline Premium Mono 40 is an SAE 40 monograde engine oil delivering strong protection for turbocharged and naturally aspirated diesel and petrol engines. Meeting API CF-2, SG, Allison C3 and Caterpillar TO-2, it controls high-temperature piston deposits, reduces wear and resists rust for extended engine life. The 5L pack suits single-machine top-ups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn SAE 40 monograde for diesel and petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhere a fixed viscosity is called for rather than a multigrade span, a monograde is the right answer. This SAE 40 monograde delivers strong protection for turbocharged and naturally aspirated diesel and petrol engines that specify a 40 grade, controlling high-temperature deposits and wear with zinc anti-wear additives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 40 grade provides a robust film for engines running hot or under load, while advanced zinc anti-wear additives protect against wear and the formulation resists rust and controls high-temperature piston deposits. That keeps the engine clean and protected across a hard duty cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Allison C3, API CF-2 and SG and Caterpillar TO-2, covering engine use as well as some transmission and drivetrain applications that call for an SAE 40 monograde. Matching the grade and specification to the equipment is what delivers the intended protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older diesel and petrol engines and equipment calling for an SAE 40 monograde. Confirm the grade and specification your equipment requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 40 monograde suits diesel and petrol engines and drivetrain applications that specify a 40 grade, so confirm the equipment maker's requirement before selecting, since a monograde is chosen where a fixed viscosity is called for rather than a multigrade span. Its Allison C3, API CF-2 and SG and Caterpillar TO-2 coverage reflects both engine and transmission uses. Follow the service interval, keep top-ups clean and to the same grade, and change on schedule under hard duty. Where an SAE 40 monograde is specified, the robust film, zinc anti-wear protection and deposit control keep the engine or drivetrain clean and protected under heat and load.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478724436047,"sku":"1282.05","price":56.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1282-05-premium-mono-40-engine-oil-5l.webp?v=1785300689"},{"product_id":"1282-20","title":"1282.20 Premium Mono 40 Engine Oil 20L","description":"\u003cp\u003eValvoline Premium Mono 40 is an SAE 40 monograde engine oil for turbocharged and naturally aspirated diesel and petrol engines, meeting API CF-2, SG, Allison C3 and Caterpillar TO-2. Its zinc anti-wear additives control high-temperature deposits, reduce wear and resist rust. The 20L pack is the practical choice for workshops servicing engines and equipment on a 40 monograde.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn SAE 40 monograde for diesel and petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhere a fixed viscosity is called for rather than a multigrade span, a monograde is the right answer. This SAE 40 monograde delivers strong protection for turbocharged and naturally aspirated diesel and petrol engines that specify a 40 grade, controlling high-temperature deposits and wear with zinc anti-wear additives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 40 grade provides a robust film for engines running hot or under load, while advanced zinc anti-wear additives protect against wear and the formulation resists rust and controls high-temperature piston deposits. That keeps the engine clean and protected across a hard duty cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Allison C3, API CF-2 and SG and Caterpillar TO-2, covering engine use as well as some transmission and drivetrain applications that call for an SAE 40 monograde. Matching the grade and specification to the equipment is what delivers the intended protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older diesel and petrol engines and equipment calling for an SAE 40 monograde. Confirm the grade and specification your equipment requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 40 monograde suits diesel and petrol engines and drivetrain applications that specify a 40 grade, so confirm the equipment maker's requirement before selecting, since a monograde is chosen where a fixed viscosity is called for rather than a multigrade span. Its Allison C3, API CF-2 and SG and Caterpillar TO-2 coverage reflects both engine and transmission uses. Follow the service interval, keep top-ups clean and to the same grade, and change on schedule under hard duty. Where an SAE 40 monograde is specified, the robust film, zinc anti-wear protection and deposit control keep the engine or drivetrain clean and protected under heat and load.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478735183951,"sku":"1282.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1282-20-premium-mono-40-engine-oil-20l.webp?v=1785300690"},{"product_id":"1290-20","title":"1290.20 SynPower ENV C2 5W30 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower ENV C2 5W30 is a premium full synthetic engine oil for modern petrol and diesel passenger vehicles, using mid-SAPS technology to protect emissions hardware while meeting current American and European performance standards. Built to ACEA C2 and API SN\/CF, it balances aftertreatment protection with strong engine cleanliness and wear control. Supplied in a 20L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA C2 oil balancing efficiency and protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn ACEA C2 oil is built to do two things at once: protect the emissions hardware with mid-SAPS chemistry, and support fuel economy with a lower-friction formulation. This full synthetic C2 5W30 delivers that balance for modern petrol and diesel passenger vehicles, while meeting both European and American performance standards in one oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMid-SAPS and fuel economy\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mid-SAPS chemistry keeps ash, phosphorus and sulphur down to protect diesel particulate filters and catalysts, while the C2 formulation is designed for lower friction to support fuel economy. It balances that efficiency focus with strong engine cleanliness and wear control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDual-standard coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA C2 and API SN\/CF, covering both European and American performance requirements in one oil, which suits mixed workshops servicing a range of makes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits modern petrol and diesel cars specifying an ACEA C2 5W30. Confirm the exact grade and approval your engine requires before selecting, since low-SAPS oils are matched to specific engines and their emissions systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the specification right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn ACEA C2 oil is a low-friction, mid-SAPS grade matched to specific engines, so confirm your vehicle calls for a C2 5W30 before selecting rather than substituting a C3 or a full-SAPS oil. The mid-SAPS chemistry protects the diesel particulate filter and catalyst, while the C2 formulation supports fuel economy, so it belongs in engines designed for it. Follow the service schedule, top up with the same specification, and keep to the correct grade. Covering both ACEA C2 and API SN\/CF, it suits mixed workshops servicing a range of makes, and used in the right engine it balances efficiency with genuine engine and emissions protection.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478749208655,"sku":"1290.20","price":309.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1290-20-synpower-env-c2-5w30-synthetic-engine-oil-20l.webp?v=1785300694"},{"product_id":"1293-20","title":"1293.20 SynPower MST C3 5W40 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower MST C3 5W40 is a premium full synthetic, mid-SAPS engine oil for modern petrol and diesel engines with emissions hardware, meeting ACEA C3 with BMW LL-04, Mercedes-Benz 229.31\/229.51, Porsche A40 and Renault approvals. It protects DPFs and catalysts while its 5W40 grade holds a robust film under heat and load. The 20L pack suits workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA mid-SAPS C3 oil with a heavier film\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome modern engines want the emissions protection of a mid-SAPS oil but the firmer film of a heavier grade, and that is the gap this oil fills. A full synthetic ACEA C3 in a 5W40 grade, it keeps a diesel particulate filter and catalyst clear while holding a robust film under the load a higher-output engine generates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection for the engine and the emissions system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mid-SAPS chemistry keeps ash, phosphorus and sulphur down to protect the DPF and catalyst, while the 5W40 grade holds a firmer film under sustained load and heat, which suits higher-output and harder-worked engines. That combination protects the aftertreatment hardware without giving up film strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA C3 with approvals including BMW LL-04, Mercedes-Benz 229.31 and 229.51, Porsche A40 and Renault, matching the requirement for a wide range of European engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits European petrol and diesel cars specifying an ACEA C3 5W40. Confirm the exact approval your engine requires before selecting, since C3 oils are matched closely to specific engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the specification right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a C3 mid-SAPS oil in a heavier 5W40 grade, matched to particular engines, so confirm the approval your vehicle needs, such as BMW LL-04, Mercedes-Benz, Porsche A40 or Renault, rather than choosing on viscosity alone. The mid-SAPS chemistry protects the diesel particulate filter and catalyst, and the 5W40 film suits higher-output and harder-worked engines. Follow the maker's schedule, top up with the same specification, and keep to approved oils. In the right vehicle, it holds a robust film under load while keeping the emissions hardware clear, which is what a performance-oriented European engine needs from a modern oil.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478773358671,"sku":"1293.20","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1293-20-synpower-mst-c3-5w40-synthetic-engine-oil-20l.webp?v=1785300696"},{"product_id":"1298-20","title":"1298.20 SynPower FE 5W30 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower FE 5W30 is a full synthetic engine oil for modern engines prioritising fuel efficiency, emissions compatibility and durability, formulated for late-generation Ford petrol and diesel engines. Meeting ACEA A5\/B5 and API SL\/CF, it combines low-friction economy with strong protection. The 20L pack suits workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA fuel-efficient synthetic for Ford engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eACEA A5\/B5 is a low-friction, fuel-economy grade with a lower high-temperature high-shear viscosity than a standard oil, which reduces internal drag and saves fuel in engines built to run it. This full synthetic 5W30 is formulated to that grade for late-generation Ford petrol and diesel engines, delivering the economy the maker intended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the A5\/B5 grade matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eACEA A5\/B5 is a low-friction, fuel-economy oil grade with a lower high-temperature high-shear viscosity than a standard oil, which reduces internal drag and saves fuel. It is designed specifically for engines built to run this thinner-in-service oil, so using it in the right engine delivers the economy the manufacturer intended while maintaining protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA A5\/B5 and API SL\/CF, with suitability for late-generation Ford petrol and diesel engines and other vehicles that specify this grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits Ford and compatible vehicles specifying an ACEA A5\/B5 5W30. Because A5\/B5 oils are only appropriate for engines designed around them, confirm the grade your engine calls for before selecting rather than substituting a standard 5W30.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the A5\/B5 grade is specific\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eACEA A5\/B5 is a low-friction, fuel-economy grade designed for engines built to run a thinner-in-service oil, so it must only be used where the vehicle specifies it, and it is not a substitute for a standard 5W30 in an engine that does not call for A5\/B5. In late-generation Ford petrol and diesel engines and other vehicles that specify it, it delivers the economy the maker intended while maintaining protection. Follow the service schedule, top up with the same specification, and confirm the requirement before selecting. Used correctly, it saves fuel without compromising the engine, which is exactly the balance these modern engines are tuned for.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478788235343,"sku":"1298.20","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1298-20-synpower-fe-5w30-synthetic-engine-oil-20l.webp?v=1785300698"},{"product_id":"1299-20","title":"1299.20 SynPower DX-1 5W30 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower DX-1 5W30 is a low-viscosity full synthetic engine oil for modern petrol engines, delivering strong wear control, clean operation and fuel efficiency. Meeting the latest API SP, SQ and ILSAC GF-6A\/GF-7A with wide Ford, GM and Chrysler coverage, it protects GDI engines against deposits and low-speed pre-ignition. The 20L pack suits workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLatest-standard protection for modern petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModern gasoline direct-injection engines face two particular risks: deposit build-up and low-speed pre-ignition, a damaging abnormal combustion event in turbocharged engines. This low-viscosity full synthetic 5W30 is built to the latest API SP and SQ and ILSAC GF-6A and GF-7A standards, which are designed specifically to guard against both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for direct-injection engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModern gasoline direct-injection (GDI) engines face two particular risks: deposit build-up and low-speed pre-ignition (LSPI), a damaging abnormal combustion event in turbocharged engines. The latest API SP and GF-6A\/GF-7A formulation is specifically designed to guard against both, while keeping the engine clean and efficient between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide OEM coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries broad Ford, General Motors and Chrysler coverage, so one oil suits a wide range of modern petrol vehicles that call for a 5W30.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits modern petrol cars, including GDI and turbocharged engines, specifying a 5W30 full synthetic. Confirm the grade your engine calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection for modern direct injection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeeting the latest API SP and SQ and ILSAC GF-6A and GF-7A, this oil carries the newest protections petrol engines need, including guarding against low-speed pre-ignition in turbocharged direct-injection engines and controlling the deposits GDI engines are prone to. That makes it well suited to modern engines specifying a 5W30, but as always confirm your engine's grade first. Follow the service schedule and shorten it for stop-start or short-trip duty. Top up with the same grade, and moving between synthetics of the same specification at a change is straightforward. The broad Ford, GM and Chrysler coverage means one oil suits a wide range of modern petrol vehicles.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478799638607,"sku":"1299.20","price":219.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1299-20-synpower-5w30-synthetic-engine-oil-20l.webp?v=1785300699"},{"product_id":"1334-20","title":"1334.20 SynPower ENV C1 5W30 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower ENV C1 5W30 is a premium full synthetic, low-SAPS engine oil built for modern petrol and diesel engines that depend on emissions hardware. Its catalyst-friendly, low-ash chemistry protects diesel particulate filters and three-way catalysts while delivering robust engine protection, and it meets ACEA C1 with Ford and Jaguar Land Rover approvals. Supplied in a 20L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe low-ash choice for sensitive emissions systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eACEA C1 is the lowest-ash mainstream oil category, which makes it the right choice where a manufacturer specifies the most catalyst-friendly chemistry available. This premium full synthetic C1 5W30 keeps a sensitive diesel particulate filter or catalyst clearest while still carrying the wear protection a modern petrol or diesel engine needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy C1 low-SAPS matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSulphated ash, phosphorus and sulphur (SAPS) are what clog a diesel particulate filter (DPF) or poison a catalyst over time. C1 runs the lowest SAPS level of the common categories, so it keeps that hardware clearest, while still carrying the wear protection the engine needs. Using the correct low-ash grade protects both the engine and the aftertreatment system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA C1 with Ford and Jaguar Land Rover approvals, the standards these engines are engineered around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits Ford and Jaguar Land Rover vehicles specifying an ACEA C1 5W30. Because C1 is a very specific low-ash grade, confirm your engine calls for it before selecting rather than substituting a C2 or C3 oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy C1 is a specific choice\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eACEA C1 is the lowest-ash mainstream oil category and is matched to particular engines, so it must only be used where the vehicle specifies C1, such as certain Ford and Jaguar Land Rover models, and it is not interchangeable with a C2 or C3 oil. The very low ash is there to keep a sensitive diesel particulate filter or catalyst clear, so using the correct grade protects both the engine and the emissions hardware. Follow the maker's service schedule, top up with the same specification, and confirm the requirement before selecting. In the right vehicle, it delivers full engine protection with the most catalyst-friendly chemistry available.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478809731151,"sku":"1334.20","price":259.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1334-20-synpower-env-c1-5w30-synthetic-engine-oil-20l.webp?v=1785300700"},{"product_id":"1336-20","title":"1336.20 SynPower MST C4 5W30 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower MST C4 5W30 is a full synthetic, low-SAPS engine oil for modern petrol and diesel engines that rely on exhaust aftertreatment to stay clean and compliant. Designed to meet the ACEA C4 requirements of Renault and Nissan diesels fitted with DPF systems, its very low-ash chemistry keeps the filter clear while protecting the engine. Supplied in a 20L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA low-SAPS C4 oil for Renault and Nissan diesels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eACEA C4 is a very low-ash grade specified by certain manufacturers for their particulate-filter diesels, and it is not interchangeable with other grades. This full synthetic C4 5W30 is designed to meet the requirements of Renault and Nissan diesels fitted with a diesel particulate filter, keeping the filter clear while protecting the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy C4 chemistry matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eACEA C4 is a very low-ash grade specified by certain manufacturers for their DPF-equipped engines. Its low sulphated ash, phosphorus and sulphur keep the particulate filter clear over its life, while the formulation still protects the engine internals. Using the correct C4 oil is essential, because these engines are matched to it and a higher-ash oil would shorten the DPF life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA C4 with Mercedes-Benz 229.51 and Renault RN0720 approvals, covering the engines that specify this grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits Renault and Nissan diesels specifying an ACEA C4 5W30. Confirm your engine calls for C4 before selecting, since it is not interchangeable with C2 or C3 oils.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy C4 is not interchangeable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eACEA C4 is a very low-ash grade specified by certain manufacturers, chiefly Renault and Nissan, for particular diesels with a diesel particulate filter, and it is not interchangeable with C2 or C3 oils. Using the correct C4 oil is essential, because these engines are matched to it and a higher-ash oil would shorten the filter's life. Confirm your engine calls for C4 before selecting, follow the maker's service schedule, and top up with the same specification. In the right vehicle, the low-ash chemistry keeps the particulate filter clear over its life while still protecting the engine internals, which is exactly what these emissions-critical diesels require.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478821986383,"sku":"1336.20","price":309.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1336-20-synpower-mst-c4-5w30-synthetic-engine-front-view.webp?v=1793486720"},{"product_id":"1155-20","title":"1155.20 SynPower 5W40 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower 5W40 is a full synthetic engine oil for petrol and diesel engines, giving fast cold-start flow and a firm film under sustained heat and load. Its wide OEM coverage spans VW, Mercedes-Benz and Renault, making it a flexible workshop oil for European and Asian vehicles. Meets ACEA A3\/B4 and API SP. The 20L pack suits workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA versatile full synthetic for petrol and diesel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA full synthetic base gives better oxidation resistance, cleaner running and more stable viscosity than a mineral or semi-synthetic oil, which is what lets one 5W40 cover a broad mix of vehicles. The 5W cold grade pumps fast on start-up while the 40 hot grade holds a firm film under sustained load and heat, suiting both petrol and diesel engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold flow and hot-film strength\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 5W cold grade pumps fast on start-up to protect the engine before pressure builds, while the 40 hot grade holds a firm film under sustained load and heat. That balance suits everything from a European turbo-diesel to a hard-driven petrol engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad OEM approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA A3\/B4 and API SP, with approvals including Volkswagen 502.00 and 505.00, Mercedes-Benz 229.1, Renault RN700 and General Motors, so it matches the requirement for a wide range of European and Asian vehicles rather than just the grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits European and Asian petrol and diesel cars specifying a 5W40 full synthetic. Confirm the grade and any approval your engine requires before selecting, since some engines call for a specific low-SAPS oil instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSynPower 5W40 suits European and Asian petrol and diesel cars that specify a 5W40, so confirm your engine's grade and any maker approval such as VW 502\/505 or Mercedes-Benz before selecting. Follow the service schedule for oil and filter changes, and shorten it for stop-start, short-trip or towing duty. Top up with the same grade, and moving between synthetic oils of the same specification at a change is fine. As a full synthetic it resists oxidation and holds its grade longer than a mineral or semi-synthetic oil, which is what keeps a hard-worked engine clean and protected across a wide temperature range.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478976258127,"sku":"1155.20","price":219.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1155-20-synpower-5w40-synthetic-engine-oil-20l.webp?v=1785300665"},{"product_id":"1281-51","title":"1281.51 Premium Mono 30 Engine Oil 205L","description":"\u003cp\u003eValvoline Premium Mono 30 is an SAE 30 monograde engine oil for high-speed two-stroke diesel engines and equipment specifying an SAE 30. Its zinc anti-wear chemistry and deposit control keep engines clean and protected against corrosive combustion gases. The 205L drum is the bulk choice for fleets and depots running these engines and dispensing in volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn SAE 30 monograde for demanding engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA monograde holds a single viscosity rather than spanning a range, which suits engines and equipment designed around that fixed grade. This SAE 30 monograde is engineered for high-speed two-stroke diesel engines and equipment that specifies an SAE 30, managing piston deposits and corrosive combustion gases with zinc anti-wear protection behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-speed diesels build piston deposits and face corrosive combustion gases, and this oil is formulated to manage both. Advanced zinc anti-wear technology protects the bearings and cylinders, while the detergent system keeps deposits down so the engine stays clean under hard, hot running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right specification\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Allison C3, API CF-2 and SG and Caterpillar TO-2, covering two-stroke diesel engine use as well as some transmission and drivetrain applications that call for an SAE 30 monograde. Matching the grade and specification to the equipment is what delivers full protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits two-stroke diesel engines and older equipment specifying an SAE 30 monograde. Confirm the grade and specification your equipment requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 30 monograde is specified for particular two-stroke diesel engines and for some transmission and drivetrain uses that call for it, so check the equipment maker's requirement before using it as an engine oil, gearbox oil or hydraulic fluid. Its Allison C3, API CF-2 and SG and Caterpillar TO-2 coverage reflects that range of uses. Follow the service interval, keep top-ups clean and to the same grade, and change on schedule since hard-run engines and drivetrains load the oil. Used where an SAE 30 monograde is called for, the zinc anti-wear protection and deposit control keep the engine or drivetrain clean and protected under demanding conditions.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479043072079,"sku":"1281.51","price":1652.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1281-51-premium-mono-30-engine-oil-205l.webp?v=1793486720"},{"product_id":"1282-51","title":"1282.51 Premium Mono 40 Engine Oil 205L","description":"\u003cp\u003eValvoline Premium Mono 40 is an SAE 40 monograde engine oil for turbocharged and naturally aspirated diesel and petrol engines, meeting API CF-2, SG, Allison C3 and Caterpillar TO-2. It controls high-temperature piston deposits, reduces wear and resists rust with zinc anti-wear chemistry. The 205L drum is the bulk choice for fleets and depots dispensing in volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn SAE 40 monograde for diesel and petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhere a fixed viscosity is called for rather than a multigrade span, a monograde is the right answer. This SAE 40 monograde delivers strong protection for turbocharged and naturally aspirated diesel and petrol engines that specify a 40 grade, controlling high-temperature deposits and wear with zinc anti-wear additives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 40 grade provides a robust film for engines running hot or under load, while advanced zinc anti-wear additives protect against wear and the formulation resists rust and controls high-temperature piston deposits. That keeps the engine clean and protected across a hard duty cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Allison C3, API CF-2 and SG and Caterpillar TO-2, covering engine use as well as some transmission and drivetrain applications that call for an SAE 40 monograde. Matching the grade and specification to the equipment is what delivers the intended protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older diesel and petrol engines and equipment calling for an SAE 40 monograde. Confirm the grade and specification your equipment requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 40 monograde suits diesel and petrol engines and drivetrain applications that specify a 40 grade, so confirm the equipment maker's requirement before selecting, since a monograde is chosen where a fixed viscosity is called for rather than a multigrade span. Its Allison C3, API CF-2 and SG and Caterpillar TO-2 coverage reflects both engine and transmission uses. Follow the service interval, keep top-ups clean and to the same grade, and change on schedule under hard duty. Where an SAE 40 monograde is specified, the robust film, zinc anti-wear protection and deposit control keep the engine or drivetrain clean and protected under heat and load.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479046742095,"sku":"1282.51","price":1652.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1282-51-premium-mono-40-engine-oil-205l.webp?v=1793486720"},{"product_id":"1283-51","title":"1283.51 Premium Mono 50 Engine Oil 205L","description":"\u003cp\u003eValvoline Premium Mono 50 is an SAE 50 monograde engine oil for diesel and petrol engines needing a heavy hot film, meeting API CF-2, SG, Allison C3 and Caterpillar TO-2. It resists high-temperature deposits, wear and rust with zinc anti-wear chemistry. The 205L drum is the bulk solution for fleets and depots running these engines and dispensing in volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavy SAE 50 monograde\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEngines that run hot and hard, or with wider clearances, need a heavy film to hold oil pressure and a protective barrier, which is where an SAE 50 monograde comes in. This grade lays down that thick film for turbocharged and naturally aspirated diesel and petrol engines, backed by zinc anti-wear additives and strong deposit control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe heavy 50 film holds oil pressure and a protective barrier under high temperature and load, while advanced zinc anti-wear additives protect the bearings and cylinders and the formulation resists rust and high-temperature deposits. That keeps a hard-working engine clean and protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Allison C3, API CF-2 and SG and Caterpillar TO-2, covering engine use as well as some transmission and drivetrain applications specifying an SAE 50 monograde. Matching the grade and specification to the equipment delivers the intended protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older engines and equipment running hot and specifying an SAE 50 monograde. Confirm the grade and specification your equipment requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 50 monograde is the heavy choice for engines and drivetrains that run hot or have wider clearances and specify a 50 grade, so check the equipment maker's requirement before use. Its Allison C3, API CF-2 and SG and Caterpillar TO-2 coverage reflects both engine and transmission applications. Follow the service interval, keep top-ups clean and to the same grade, and change on schedule under hard duty. Where an SAE 50 monograde is called for, the heavy film holds oil pressure and protection under high temperature and load, while the zinc anti-wear additives and deposit control keep the engine or drivetrain clean through demanding service.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479050870863,"sku":"1283.51","price":1652.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1283-51-premium-mono-50-engine-oil-205l.webp?v=1793486720"},{"product_id":"1281-20","title":"1281.20 Premium Mono 30 Engine Oil 20L","description":"\u003cp\u003eValvoline Premium Mono 30 is an SAE 30 monograde engine oil for high-speed two-stroke diesel engines and equipment specifying an SAE 30, built with zinc anti-wear technology and strong deposit control. It keeps engines clean and guards against corrosive combustion gases through hard service. The 20L pack is the practical choice for workshops and regular servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn SAE 30 monograde for demanding engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA monograde holds a single viscosity rather than spanning a range, which suits engines and equipment designed around that fixed grade. This SAE 30 monograde is engineered for high-speed two-stroke diesel engines and equipment that specifies an SAE 30, managing piston deposits and corrosive combustion gases with zinc anti-wear protection behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-speed diesels build piston deposits and face corrosive combustion gases, and this oil is formulated to manage both. Advanced zinc anti-wear technology protects the bearings and cylinders, while the detergent system keeps deposits down so the engine stays clean under hard, hot running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right specification\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Allison C3, API CF-2 and SG and Caterpillar TO-2, covering two-stroke diesel engine use as well as some transmission and drivetrain applications that call for an SAE 30 monograde. Matching the grade and specification to the equipment is what delivers full protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits two-stroke diesel engines and older equipment specifying an SAE 30 monograde. Confirm the grade and specification your equipment requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 30 monograde is specified for particular two-stroke diesel engines and for some transmission and drivetrain uses that call for it, so check the equipment maker's requirement before using it as an engine oil, gearbox oil or hydraulic fluid. Its Allison C3, API CF-2 and SG and Caterpillar TO-2 coverage reflects that range of uses. Follow the service interval, keep top-ups clean and to the same grade, and change on schedule since hard-run engines and drivetrains load the oil. Used where an SAE 30 monograde is called for, the zinc anti-wear protection and deposit control keep the engine or drivetrain clean and protected under demanding conditions.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479074955343,"sku":"1281.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1281-20-premium-mono-30-engine-oil-20l.webp?v=1785300687"},{"product_id":"1283-20","title":"1283.20 Premium Mono 50 Engine Oil 20L","description":"\u003cp\u003eValvoline Premium Mono 50 is an SAE 50 monograde engine oil for turbocharged and naturally aspirated diesel and petrol engines that need a heavy hot film, meeting API CF-2, SG, Allison C3 and Caterpillar TO-2. Its zinc anti-wear additives protect against deposits, wear and rust under high temperature and load. The 20L pack suits workshops servicing engines on a 50 monograde.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavy SAE 50 monograde\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEngines that run hot and hard, or with wider clearances, need a heavy film to hold oil pressure and a protective barrier, which is where an SAE 50 monograde comes in. This grade lays down that thick film for turbocharged and naturally aspirated diesel and petrol engines, backed by zinc anti-wear additives and strong deposit control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe heavy 50 film holds oil pressure and a protective barrier under high temperature and load, while advanced zinc anti-wear additives protect the bearings and cylinders and the formulation resists rust and high-temperature deposits. That keeps a hard-working engine clean and protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Allison C3, API CF-2 and SG and Caterpillar TO-2, covering engine use as well as some transmission and drivetrain applications specifying an SAE 50 monograde. Matching the grade and specification to the equipment delivers the intended protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older engines and equipment running hot and specifying an SAE 50 monograde. Confirm the grade and specification your equipment requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 50 monograde is the heavy choice for engines and drivetrains that run hot or have wider clearances and specify a 50 grade, so check the equipment maker's requirement before use. Its Allison C3, API CF-2 and SG and Caterpillar TO-2 coverage reflects both engine and transmission applications. Follow the service interval, keep top-ups clean and to the same grade, and change on schedule under hard duty. Where an SAE 50 monograde is called for, the heavy film holds oil pressure and protection under high temperature and load, while the zinc anti-wear additives and deposit control keep the engine or drivetrain clean through demanding service.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479076134991,"sku":"1283.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1283-20-premium-mono-50-engine-oil-20l.webp?v=1785300692"},{"product_id":"1377-20","title":"1377.20 All Fleet Plus E900 15W40 CK-4\/E11 Engine Oil 20L","description":"\u003cp\u003eValvoline All Fleet Plus E900 15W40 is a next-generation heavy-duty diesel engine oil meeting API CK-4 and ACEA E11, formulated to protect modern emission-controlled diesels and older engines from one bottle. Its low-SAPS, DPF-safe formulation delivers outstanding oxidation control, shear stability and wear protection for cleaner engines and long service life. The 20L pack is the everyday workshop choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne oil for a mixed-age fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost fleets run a mix of ages, and juggling a different oil for each engine is a headache. This next-generation heavy-duty diesel oil is built to end that, meeting the current API CK-4 and ACEA E11 categories while staying fully backward compatible, so one product protects the late-model prime mover and the older diesel beside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEmissions-system safe, and genuinely hard-wearing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe low-SAPS (sulphated ash, phosphorus and sulphur) chemistry is what makes this oil safe for engines with diesel particulate filters (DPF) and selective catalytic reduction (SCR) systems, where a high-ash oil would clog the hardware. At the same time the additive package delivers strong oxidation control, shear stability and soot handling, so the oil holds its 15W40 grade and keeps pistons, rings and bearings clean through long, hard drains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved against the specs fleets run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of current OEM approvals, including Cummins CES 20081 and 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EO-O Premium Plus, MAN 3575, Renault RLD-4 and Deutz DQC IV. One product meeting that range serves most modern on-highway and off-highway platforms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Fleet Plus or an older-spec oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose All Fleet Plus E900 whenever any engine in the fleet has a DPF or SCR system, or when you want to standardise a mixed fleet on the latest CK-4 protection. A high-SAPS CI-4 oil suits only older diesels with no particulate filter, so the emissions hardware on the newest engine sets the requirement for the whole fleet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and getting the best from it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll Fleet Plus supports the extended drain intervals modern engine makers publish, but the interval to follow is always the one in the vehicle's service schedule for its duty, and severe conditions such as heavy idling, dust or short trips warrant shortening it. Because it is a low-SAPS CK-4 oil, it is safe across both emission-controlled and older engines, which is what lets it standardise a mixed fleet on one product and simplify the store. Change the oil filter with the oil, keep top-ups clean, and confirm the grade and approval the newest engines need. Run this way, one oil protects the whole yard and keeps servicing straightforward.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479084228687,"sku":"1377.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1377-20-all-fleet-plus-e900-15w40-diesel-engine-oil-20l.webp?v=1785300707"},{"product_id":"1377-10","title":"1377.10 All Fleet Plus E900 15W40 CK-4\/E11 Engine Oil 10L","description":"\u003cp\u003eValvoline All Fleet Plus E900 15W40 is a next-generation heavy-duty diesel engine oil to API CK-4 and ACEA E11, protecting modern low-emission diesels and older engines alike. Its low-SAPS chemistry is safe for DPF and SCR systems while delivering strong wear control and shear stability through the drain. The 10L pack is a handy size for regular top-ups and light fleet servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne oil for a mixed-age fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost fleets run a mix of ages, and juggling a different oil for each engine is a headache. This next-generation heavy-duty diesel oil is built to end that, meeting the current API CK-4 and ACEA E11 categories while staying fully backward compatible, so one product protects the late-model prime mover and the older diesel beside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEmissions-system safe, and genuinely hard-wearing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe low-SAPS (sulphated ash, phosphorus and sulphur) chemistry is what makes this oil safe for engines with diesel particulate filters (DPF) and selective catalytic reduction (SCR) systems, where a high-ash oil would clog the hardware. At the same time the additive package delivers strong oxidation control, shear stability and soot handling, so the oil holds its 15W40 grade and keeps pistons, rings and bearings clean through long, hard drains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved against the specs fleets run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of current OEM approvals, including Cummins CES 20081 and 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EO-O Premium Plus, MAN 3575, Renault RLD-4 and Deutz DQC IV. One product meeting that range serves most modern on-highway and off-highway platforms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Fleet Plus or an older-spec oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose All Fleet Plus E900 whenever any engine in the fleet has a DPF or SCR system, or when you want to standardise a mixed fleet on the latest CK-4 protection. A high-SAPS CI-4 oil suits only older diesels with no particulate filter, so the emissions hardware on the newest engine sets the requirement for the whole fleet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and getting the best from it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll Fleet Plus supports the extended drain intervals modern engine makers publish, but the interval to follow is always the one in the vehicle's service schedule for its duty, and severe conditions such as heavy idling, dust or short trips warrant shortening it. Because it is a low-SAPS CK-4 oil, it is safe across both emission-controlled and older engines, which is what lets it standardise a mixed fleet on one product and simplify the store. Change the oil filter with the oil, keep top-ups clean, and confirm the grade and approval the newest engines need. Run this way, one oil protects the whole yard and keeps servicing straightforward.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479100579919,"sku":"1377.10","price":105.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1377-10-all-fleet-plus-e900-15w40-diesel-engine-oil-10l.webp?v=1785300706"},{"product_id":"1377-05","title":"1377.05 All Fleet Plus E900 15W40 CK-4\/E11 Engine Oil 5L","description":"\u003cp\u003eValvoline All Fleet Plus E900 15W40 is a next-generation heavy-duty diesel engine oil meeting API CK-4 and ACEA E11, engineered to protect both modern emission-controlled diesels and older engines. Its low-SAPS, DPF-compatible formulation delivers excellent oxidation control, shear stability and wear protection, keeping engines cleaner for longer. The 5L pack suits owner-operators topping up a single vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne oil for a mixed-age fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost fleets run a mix of ages, and juggling a different oil for each engine is a headache. This next-generation heavy-duty diesel oil is built to end that, meeting the current API CK-4 and ACEA E11 categories while staying fully backward compatible, so one product protects the late-model prime mover and the older diesel beside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEmissions-system safe, and genuinely hard-wearing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe low-SAPS (sulphated ash, phosphorus and sulphur) chemistry is what makes this oil safe for engines with diesel particulate filters (DPF) and selective catalytic reduction (SCR) systems, where a high-ash oil would clog the hardware. At the same time the additive package delivers strong oxidation control, shear stability and soot handling, so the oil holds its 15W40 grade and keeps pistons, rings and bearings clean through long, hard drains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved against the specs fleets run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of current OEM approvals, including Cummins CES 20081 and 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EO-O Premium Plus, MAN 3575, Renault RLD-4 and Deutz DQC IV. One product meeting that range serves most modern on-highway and off-highway platforms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Fleet Plus or an older-spec oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose All Fleet Plus E900 whenever any engine in the fleet has a DPF or SCR system, or when you want to standardise a mixed fleet on the latest CK-4 protection. A high-SAPS CI-4 oil suits only older diesels with no particulate filter, so the emissions hardware on the newest engine sets the requirement for the whole fleet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and getting the best from it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll Fleet Plus supports the extended drain intervals modern engine makers publish, but the interval to follow is always the one in the vehicle's service schedule for its duty, and severe conditions such as heavy idling, dust or short trips warrant shortening it. Because it is a low-SAPS CK-4 oil, it is safe across both emission-controlled and older engines, which is what lets it standardise a mixed fleet on one product and simplify the store. Change the oil filter with the oil, keep top-ups clean, and confirm the grade and approval the newest engines need. Run this way, one oil protects the whole yard and keeps servicing straightforward.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479100809295,"sku":"1377.05","price":64.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1377-05-all-fleet-plus-e900-diesel-engine-oil-5l.webp?v=1785300705"},{"product_id":"1377-51","title":"1377.51 All Fleet Plus E900 15W40 CK-4\/E11 Engine Oil 205L","description":"\u003cp\u003eValvoline All Fleet Plus E900 15W40 is a next-generation heavy-duty diesel engine oil to API CK-4 and ACEA E11, protecting both modern low-emission diesels and older engines. Its low-SAPS, DPF-compatible formulation controls oxidation and wear while holding viscosity through demanding duty. The 205L drum is the bulk solution for fleets and depots dispensing across many machines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne oil for a mixed-age fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost fleets run a mix of ages, and juggling a different oil for each engine is a headache. This next-generation heavy-duty diesel oil is built to end that, meeting the current API CK-4 and ACEA E11 categories while staying fully backward compatible, so one product protects the late-model prime mover and the older diesel beside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEmissions-system safe, and genuinely hard-wearing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe low-SAPS (sulphated ash, phosphorus and sulphur) chemistry is what makes this oil safe for engines with diesel particulate filters (DPF) and selective catalytic reduction (SCR) systems, where a high-ash oil would clog the hardware. At the same time the additive package delivers strong oxidation control, shear stability and soot handling, so the oil holds its 15W40 grade and keeps pistons, rings and bearings clean through long, hard drains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved against the specs fleets run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of current OEM approvals, including Cummins CES 20081 and 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EO-O Premium Plus, MAN 3575, Renault RLD-4 and Deutz DQC IV. One product meeting that range serves most modern on-highway and off-highway platforms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Fleet Plus or an older-spec oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose All Fleet Plus E900 whenever any engine in the fleet has a DPF or SCR system, or when you want to standardise a mixed fleet on the latest CK-4 protection. A high-SAPS CI-4 oil suits only older diesels with no particulate filter, so the emissions hardware on the newest engine sets the requirement for the whole fleet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and getting the best from it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll Fleet Plus supports the extended drain intervals modern engine makers publish, but the interval to follow is always the one in the vehicle's service schedule for its duty, and severe conditions such as heavy idling, dust or short trips warrant shortening it. Because it is a low-SAPS CK-4 oil, it is safe across both emission-controlled and older engines, which is what lets it standardise a mixed fleet on one product and simplify the store. Change the oil filter with the oil, keep top-ups clean, and confirm the grade and approval the newest engines need. Run this way, one oil protects the whole yard and keeps servicing straightforward.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479104282703,"sku":"1377.51","price":1600.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1377-51-all-fleet-plus-e900-15w40-ck-4-e11.webp?v=1793486757"},{"product_id":"1377","title":"1377 IBC All Fleet Plus E900 15W40 CK-4\/E11 Engine Oil 1000L","description":"\u003cp\u003eValvoline All Fleet Plus E900 15W40 is a next-generation heavy-duty diesel engine oil meeting API CK-4 and ACEA E11, engineered for modern emission-controlled diesels and older engines. Its low-SAPS, DPF-safe formulation delivers strong oxidation control, shear stability and wear protection across long drains. Supplied in a 1000L IBC for large depots dispensing high oil volumes through a pump or tap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne oil for a mixed-age fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost fleets run a mix of ages, and juggling a different oil for each engine is a headache. This next-generation heavy-duty diesel oil is built to end that, meeting the current API CK-4 and ACEA E11 categories while staying fully backward compatible, so one product protects the late-model prime mover and the older diesel beside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEmissions-system safe, and genuinely hard-wearing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe low-SAPS (sulphated ash, phosphorus and sulphur) chemistry is what makes this oil safe for engines with diesel particulate filters (DPF) and selective catalytic reduction (SCR) systems, where a high-ash oil would clog the hardware. At the same time the additive package delivers strong oxidation control, shear stability and soot handling, so the oil holds its 15W40 grade and keeps pistons, rings and bearings clean through long, hard drains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved against the specs fleets run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of current OEM approvals, including Cummins CES 20081 and 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EO-O Premium Plus, MAN 3575, Renault RLD-4 and Deutz DQC IV. One product meeting that range serves most modern on-highway and off-highway platforms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll Fleet Plus or an older-spec oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose All Fleet Plus E900 whenever any engine in the fleet has a DPF or SCR system, or when you want to standardise a mixed fleet on the latest CK-4 protection. A high-SAPS CI-4 oil suits only older diesels with no particulate filter, so the emissions hardware on the newest engine sets the requirement for the whole fleet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and getting the best from it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll Fleet Plus supports the extended drain intervals modern engine makers publish, but the interval to follow is always the one in the vehicle's service schedule for its duty, and severe conditions such as heavy idling, dust or short trips warrant shortening it. Because it is a low-SAPS CK-4 oil, it is safe across both emission-controlled and older engines, which is what lets it standardise a mixed fleet on one product and simplify the store. Change the oil filter with the oil, keep top-ups clean, and confirm the grade and approval the newest engines need. Run this way, one oil protects the whole yard and keeps servicing straightforward.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479107821647,"sku":"1377","price":7000.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1377-ibc-all-fleet-plus-e900-15w40-diesel-engine-oil-1000l.webp?v=1785300709"},{"product_id":"1087-05","title":"1087.05 Diesel Extra 15W40 CI-4\/SL E7 Engine Oil 5L","description":"\u003cp\u003eValvoline Diesel Extra 15W40 is a heavy-duty diesel engine oil built for older diesels and mixed diesel and petrol fleets, carrying API CI-4\/SL and ACEA E7. Its high-detergency formulation handles the heavy soot loads of pre-DPF engines and holds viscosity control right through the drain, keeping pistons clean and wear in check. The 5L pack suits owner-operators topping up a single truck or tractor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for older diesels and mixed fleets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear, and managing that soot is the whole job for an oil like this. Carrying API CI-4\/SL and ACEA E7, it is built around strong detergency for pre-DPF engines and the mixed diesel and petrol fleets that run alongside them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSoot handling is the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear. The CI-4 and E7 formulation is built around strong detergency and dispersancy that keep that soot in suspension and control the viscosity rise it causes, so the oil holds its grade and keeps pistons, rings and bearings clean through the drain interval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals for the older fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of approvals suited to pre-DPF engines, including Cummins CES 20076 to 20078, Volvo VDS-3, Mack EO-M Plus, MAN 3275 and Renault RLD-2. That coverage is what lets a single oil serve a mixed older fleet with confidence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiesel Extra or a modern low-SAPS oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiesel Extra is a high-SAPS oil, which suits older diesels but is not appropriate for engines fitted with a diesel particulate filter (DPF) or SCR system, where the ash would clog the hardware. Choose Diesel Extra for older, pre-DPF engines, and a low-SAPS CK-4 oil for any modern emission-controlled diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and the right application\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn older, high-soot diesels, oil and filter changes on the manufacturer's schedule matter more than usual, because soot loading and acid build-up are what wear these engines, and a fresh charge resets both. Where duty is severe, such as high-idle or dusty work, shortening the interval pays off. The one firm limit is emissions hardware: as a high-SAPS oil, Diesel Extra is not for engines with a diesel particulate filter or SCR system, so on any modern emission-controlled diesel choose a low-SAPS CK-4 oil instead. For the older, pre-DPF fleet it is designed for, it is a robust, cost-effective choice that keeps engines clean and protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479109689423,"sku":"1087.05","price":55.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1087-05-diesel-extra-15w40-5l.webp?v=1785300647"},{"product_id":"1087-51","title":"1087.51 Diesel Extra 15W40 CI-4\/SL E7 Engine Oil 205L","description":"\u003cp\u003eValvoline Diesel Extra 15W40 is a heavy-duty diesel engine oil for older diesels and mixed fleets, meeting API CI-4\/SL and ACEA E7. It handles heavy pre-DPF soot loads, resists thickening and controls deposits to protect engines through demanding duty cycles. The 205L drum is the bulk choice for fleets and depots dispensing oil across multiple machines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for older diesels and mixed fleets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear, and managing that soot is the whole job for an oil like this. Carrying API CI-4\/SL and ACEA E7, it is built around strong detergency for pre-DPF engines and the mixed diesel and petrol fleets that run alongside them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSoot handling is the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear. The CI-4 and E7 formulation is built around strong detergency and dispersancy that keep that soot in suspension and control the viscosity rise it causes, so the oil holds its grade and keeps pistons, rings and bearings clean through the drain interval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals for the older fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of approvals suited to pre-DPF engines, including Cummins CES 20076 to 20078, Volvo VDS-3, Mack EO-M Plus, MAN 3275 and Renault RLD-2. That coverage is what lets a single oil serve a mixed older fleet with confidence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiesel Extra or a modern low-SAPS oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiesel Extra is a high-SAPS oil, which suits older diesels but is not appropriate for engines fitted with a diesel particulate filter (DPF) or SCR system, where the ash would clog the hardware. Choose Diesel Extra for older, pre-DPF engines, and a low-SAPS CK-4 oil for any modern emission-controlled diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and the right application\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn older, high-soot diesels, oil and filter changes on the manufacturer's schedule matter more than usual, because soot loading and acid build-up are what wear these engines, and a fresh charge resets both. Where duty is severe, such as high-idle or dusty work, shortening the interval pays off. The one firm limit is emissions hardware: as a high-SAPS oil, Diesel Extra is not for engines with a diesel particulate filter or SCR system, so on any modern emission-controlled diesel choose a low-SAPS CK-4 oil instead. For the older, pre-DPF fleet it is designed for, it is a robust, cost-effective choice that keeps engines clean and protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479112015951,"sku":"1087.51","price":1500.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1087-51-diesel-extra-15w40-ci-4-sl-e7-engine.webp?v=1793486758"},{"product_id":"1087","title":"1087 IBC Diesel Extra 15W40 CI-4\/SL E7 Engine Oil 1000L","description":"\u003cp\u003eValvoline Diesel Extra 15W40 is a heavy-duty diesel engine oil for older diesels and mixed fleets, carrying API CI-4\/SL and ACEA E7. It controls the heavy soot loads of pre-DPF engines and resists viscosity breakdown across the drain interval. Supplied in a 1000L IBC, it is the bulk-dispensing solution for large depots and workshops running high oil volumes through a pump or tap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for older diesels and mixed fleets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear, and managing that soot is the whole job for an oil like this. Carrying API CI-4\/SL and ACEA E7, it is built around strong detergency for pre-DPF engines and the mixed diesel and petrol fleets that run alongside them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSoot handling is the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder diesels, especially those without a particulate filter, generate high soot loads that thicken oil and drive wear. The CI-4 and E7 formulation is built around strong detergency and dispersancy that keep that soot in suspension and control the viscosity rise it causes, so the oil holds its grade and keeps pistons, rings and bearings clean through the drain interval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals for the older fleet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a broad list of approvals suited to pre-DPF engines, including Cummins CES 20076 to 20078, Volvo VDS-3, Mack EO-M Plus, MAN 3275 and Renault RLD-2. That coverage is what lets a single oil serve a mixed older fleet with confidence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiesel Extra or a modern low-SAPS oil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiesel Extra is a high-SAPS oil, which suits older diesels but is not appropriate for engines fitted with a diesel particulate filter (DPF) or SCR system, where the ash would clog the hardware. Choose Diesel Extra for older, pre-DPF engines, and a low-SAPS CK-4 oil for any modern emission-controlled diesel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrain intervals and the right application\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn older, high-soot diesels, oil and filter changes on the manufacturer's schedule matter more than usual, because soot loading and acid build-up are what wear these engines, and a fresh charge resets both. Where duty is severe, such as high-idle or dusty work, shortening the interval pays off. The one firm limit is emissions hardware: as a high-SAPS oil, Diesel Extra is not for engines with a diesel particulate filter or SCR system, so on any modern emission-controlled diesel choose a low-SAPS CK-4 oil instead. For the older, pre-DPF fleet it is designed for, it is a robust, cost-effective choice that keeps engines clean and protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479115456591,"sku":"1087","price":7000.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1087-ibc-diesel-extra-15w40-1000l.webp?v=1785300652"},{"product_id":"1021-05","title":"1021.05 DuraBlend 10W30 Semi Synthetic Engine Oil 5L","description":"\u003cp\u003eValvoline DuraBlend 10W30 is a semi-synthetic multigrade engine oil for modern petrol engines, meeting the latest API SP and ILSAC GF-6A standards. The part-synthetic base flows better on cold start than a mineral oil and holds its film at operating temperature, covering the two moments engines wear hardest: the first seconds after start-up and sustained load when hot. The 5L pack suits a single-car service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA modern semi-synthetic for petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost engine wear happens at two moments: the first seconds after a cold start, before oil reaches the top end, and again under sustained load when hot. A semi-synthetic 10W30 covers both, flowing faster on cold start than a mineral oil and holding a stable film at temperature, all while meeting the latest API SP and ILSAC GF-6A standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection at start-up and under load\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost engine wear happens in the first seconds after a cold start, before oil reaches the top end, and again under sustained load when hot. The improved cold flow of the semi-synthetic base gets oil circulating faster on start-up, and the stable hot film protects under load. The API SP additive package adds protection against low-speed pre-ignition (LSPI) and timing-chain wear that matter on modern engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent-standard performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeeting API SP and ILSAC GF-6A means it carries the latest petrol engine protection, including deposit and wear control that keep the engine clean and efficient between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol passenger cars and light commercials that specify a 10W30 multigrade. Confirm the grade your engine calls for before selecting, since modern engines are designed around a particular viscosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 10W30 semi-synthetic suits modern petrol engines that specify this grade and want strong protection without the cost of a full synthetic, so check your engine's grade and specification before selecting. Follow the service schedule for oil and filter changes, and shorten the interval for stop-start city driving, short trips or towing, which work an oil harder than steady highway running. Top up with the same grade, and there is no issue moving between a semi-synthetic and a synthetic of the same specification at a change. Meeting the latest API SP and ILSAC GF-6A, it carries current protection against wear, deposits and low-speed pre-ignition on modern engines.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479118635087,"sku":"1021.05","price":56.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1021-05-durablend-10w30-semi-synthetic-engine-oil-5l.webp?v=1794951819"},{"product_id":"1022-05","title":"1022.05 DuraBlend 10W40 Semi Synthetic Engine Oil 5L","description":"\u003cp\u003eValvoline DuraBlend 10W40 is a semi-synthetic multigrade engine oil for petrol engines that specify a heavier 40 hot grade or run hotter under load. The part-synthetic base flows well on cold start, while the 40 film gives extra protection at temperature, and it carries ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals. The 5L pack suits a single-vehicle service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier semi-synthetic for engines that specify a 40\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome engines are built around a heavier hot film, either for their tolerances or the loads they run, and specifying a 40 grade holds that film where a lighter oil would thin. This semi-synthetic 10W40 delivers it, flowing well on cold start while carrying ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals for the engines that call for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the 40 grade and the European approvals matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome engines are designed around a heavier hot film, either for their tolerances or the loads they run, and specifying a 40 grade holds that film where a lighter oil would thin. DuraBlend 10W40 carries ACEA A3\/B4 along with Volkswagen and Mercedes-Benz approvals, which are the standards European petrol engines of this type are built around, so it meets the requirement rather than just the viscosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReliable everyday protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe semi-synthetic base and additive package deliver dependable cold-start flow, deposit control and wear protection across the duty cycle, keeping the engine clean and protected between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol cars and light commercials that call for a 10W40 multigrade, particularly European models specifying ACEA A3\/B4. Confirm the grade and any approval your engine requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 10W40 grade and its European approvals point to engines designed around a heavier hot film, so confirm your engine specifies a 10W40 and any ACEA A3\/B4 or maker approval before selecting rather than substituting a lighter oil. Follow the service schedule, and shorten the interval for stop-start, short-trip or towing duty that works the oil harder. Top up with the same grade, and moving between a semi-synthetic and a synthetic of the same specification at a change is fine. The heavier film suits engines that run hotter or were built for a 40 grade, holding protection where a 30 would thin, while the additive package keeps the engine clean between services.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479122403407,"sku":"1022.05","price":58.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1022-05-durablend-10w40-engine-oil-5l.webp?v=1793486758"},{"product_id":"1381-20","title":"1381.20 SynPower DT C2 0W30 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline SynPower DT C2 0W30 is a full synthetic, mid-SAPS engine oil for modern petrol and diesel engines with DPFs and catalysts, meeting ACEA C2 with Ford and Jaguar Land Rover approvals. It protects the emissions system while the 0W30 grade improves cold flow and fuel efficiency. The 20L pack is the practical choice for workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA mid-SAPS C2 oil that protects engine and emissions system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProtecting the engine and the emissions system at the same time is the job of a mid-SAPS oil, and this full synthetic ACEA C2 0W30 does it while adding fuel-economy benefit. Its low-ash chemistry keeps a diesel particulate filter and catalyst clear, and the low-viscosity 0W30 grade cuts cold-start drag and internal friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEfficiency and aftertreatment protection together\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mid-SAPS chemistry keeps ash, phosphorus and sulphur down to protect the DPF and catalyst, while the 0W30 grade cuts cold-start drag and internal friction for better economy. The 0W cold rating gives very fast oil flow on start-up, protecting the engine in the first seconds when most wear happens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA C2 with approvals including Ford and Jaguar Land Rover, covering the engines that specify this grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits modern petrol and diesel cars with emissions hardware specifying a C2 0W30. Confirm the exact grade and approval your engine requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the specification right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn ACEA C2 oil is a low-friction, mid-SAPS grade matched to specific engines, so confirm your vehicle calls for a C2 0W30, such as certain Ford and Jaguar Land Rover models, before selecting. The mid-SAPS chemistry protects the diesel particulate filter and catalyst, while the low-viscosity 0W30 grade cuts cold-start drag and saves fuel, so it belongs in engines designed for it. Follow the service schedule, top up with the same specification, and keep to the correct grade. In the right vehicle, the fast cold flow protects the engine in the first seconds after start-up while the C2 chemistry looks after the emissions system and economy together.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479132495951,"sku":"1381.20","price":309.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1381-20-synpower-dt-c2-0w30-synthetic-engin-oil.jpg?v=1793487099"},{"product_id":"1487-20","title":"1487.20 ProFleet LS Plus 5W30 CK-4\/SN E11 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline ProFleet LS Plus 5W30 is a low-SAPS, full-performance heavy-duty diesel engine oil for modern Euro 1 to 6 diesels, meeting API CK-4 and ACEA E8\/E11. The 5W30 grade improves cold-start flow and fuel efficiency while delivering strong wear protection and extended drain capability, and its low-SAPS chemistry protects DPF and SCR systems. The 20L pack suits fleet workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel-efficient protection for modern diesels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lighter, more mobile oil reduces internal friction and cold-start drag, which supports fuel economy, and that is the thinking behind a 5W30 heavy-duty diesel grade. This low-SAPS oil meets API CK-4 and a wide spread of ACEA E8 and E11 approvals, pairing that efficiency with full heavy-duty protection for modern Euro 1 to 6 diesels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects the engine and the emissions system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe low-SAPS chemistry keeps sulphated ash, phosphorus and sulphur down, which is what protects the diesel particulate filter (DPF) and SCR catalyst on a modern engine. Alongside that, the formulation delivers strong wear protection, oxidation control and soot handling, and supports the extended drain intervals modern fleets rely on to keep vehicles earning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad modern-diesel approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries an extensive approvals list for current engines, including Cummins CES 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EOS-4.5, MAN M3677 and M3775, Scania and Renault RLD-3. That coverage suits late-model on-highway fleets running to tight service schedules.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits late-model trucks and buses where fuel economy and emissions compatibility matter, particularly Euro 5 and 6 diesels. Confirm the oil grade and approval your engine specifies before selecting, since a modern engine's aftertreatment sets the SAPS requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEfficiency, drains and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 5W30 grade is chosen for fuel economy as much as protection, so it delivers most where a fleet runs the drain intervals and duty this oil is built for, on modern low-emission diesels. Follow the engine maker's service schedule and shorten it for severe duty, and change the filter with the oil. As a low-SAPS oil it is matched to engines with a diesel particulate filter and SCR system, so confirm the newest engines in the fleet accept a 5W30 CK-4 grade before standardising on it. Used in the right engines, it combines genuine fuel savings with full heavy-duty protection and long, cost-effective service.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479964639311,"sku":"1487.20","price":272.73,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1487-20-profleet-ls-plus-5w30-synthetic-engine-oil-20l.webp?v=1785301054"},{"product_id":"1487-28","title":"1487.28 ProFleet LS Plus 5W30 CK-4\/SN E11 Synthetic Engine Oil 208L","description":"\u003cp\u003eValvoline ProFleet LS Plus 5W30 is a low-SAPS heavy-duty diesel engine oil for modern Euro 1 to 6 diesels, meeting API CK-4 and ACEA E8\/E11. Its 5W30 grade aids cold-start flow and fuel economy while maintaining strong wear protection and extended drain capability, with aftertreatment-safe chemistry for DPF and SCR engines. The 208L drum is the bulk option for fleets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel-efficient protection for modern diesels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lighter, more mobile oil reduces internal friction and cold-start drag, which supports fuel economy, and that is the thinking behind a 5W30 heavy-duty diesel grade. This low-SAPS oil meets API CK-4 and a wide spread of ACEA E8 and E11 approvals, pairing that efficiency with full heavy-duty protection for modern Euro 1 to 6 diesels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects the engine and the emissions system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe low-SAPS chemistry keeps sulphated ash, phosphorus and sulphur down, which is what protects the diesel particulate filter (DPF) and SCR catalyst on a modern engine. Alongside that, the formulation delivers strong wear protection, oxidation control and soot handling, and supports the extended drain intervals modern fleets rely on to keep vehicles earning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad modern-diesel approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries an extensive approvals list for current engines, including Cummins CES 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EOS-4.5, MAN M3677 and M3775, Scania and Renault RLD-3. That coverage suits late-model on-highway fleets running to tight service schedules.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits late-model trucks and buses where fuel economy and emissions compatibility matter, particularly Euro 5 and 6 diesels. Confirm the oil grade and approval your engine specifies before selecting, since a modern engine's aftertreatment sets the SAPS requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEfficiency, drains and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 5W30 grade is chosen for fuel economy as much as protection, so it delivers most where a fleet runs the drain intervals and duty this oil is built for, on modern low-emission diesels. Follow the engine maker's service schedule and shorten it for severe duty, and change the filter with the oil. As a low-SAPS oil it is matched to engines with a diesel particulate filter and SCR system, so confirm the newest engines in the fleet accept a 5W30 CK-4 grade before standardising on it. Used in the right engines, it combines genuine fuel savings with full heavy-duty protection and long, cost-effective service.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479965425743,"sku":"1487.28","price":2400.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1487-28-profleet-ls-plus-5w30-ck-4-sn-e11.webp?v=1793486789"},{"product_id":"1495-20","title":"1495.20 ProFleet LS Plus 10W40 Synthetic Blend Engine Oil 20L","description":"\u003cp\u003eValvoline ProFleet LS Plus 10W40 is a synthetic-blend heavy-duty diesel engine oil engineered for Euro 6 and next-generation low-emission diesels, meeting API CK-4 and ACEA E8\/E11. The blend of synthetic and premium mineral base oils delivers strong wear protection, extended drain capability and clean running, with low-SAPS chemistry that safeguards DPF and SCR hardware. The 20L pack suits fleet workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA synthetic-blend oil for the latest diesels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBlending synthetic and premium mineral base oils lifts performance where it counts: stronger wear control, better oxidation resistance and the durability to support extended drains. This synthetic-blend heavy-duty diesel oil is engineered on that basis for Euro 6 and next-generation low-emission diesels, meeting API CK-4 and a wide range of ACEA E8 and E11 approvals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects the engine and the emissions system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIts low-SAPS chemistry keeps ash, phosphorus and sulphur down to protect the diesel particulate filter (DPF) and SCR catalyst, while the 10W40 grade holds a robust film under the sustained high loads a modern heavy engine sees. That combination keeps internals clean and protected without compromising the aftertreatment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad modern-diesel approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries an extensive approvals list including Cummins CES 20081 and 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EOS-4.5, MAN M3775 and MTU Type 3.1, suiting late-model on-highway fleets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits late-model trucks and buses and mixed fleets running modern low-emission diesels, where the extra durability of a synthetic blend supports longer drains. Confirm the grade and approval your engine specifies before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrains and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs a synthetic-blend CK-4 oil, ProFleet LS Plus 10W40 supports extended drains and holds up under the sustained loads Euro 6 engines generate, but the interval to follow is the one in the vehicle's service schedule for its duty, shortened for severe conditions. Change the filter with the oil and keep top-ups clean. Its low-SAPS chemistry makes it safe for engines with a diesel particulate filter and SCR system, so confirm the grade and approval the newest engines specify before standardising on it across a fleet. The synthetic-blend durability is what turns those longer drains into real savings without giving up protection on modern low-emission diesels.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479967522895,"sku":"1495.20","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1495-20-profleet-ls-plus-10w40-synthetic-engine-oil-20l.webp?v=1785301056"},{"product_id":"1495-28","title":"1495.28 ProFleet LS Plus 10W40 Synthetic Blend Engine Oil 208L","description":"\u003cp\u003eValvoline ProFleet LS Plus 10W40 is a synthetic-blend heavy-duty diesel engine oil for Euro 6 and next-generation low-emission diesels, meeting API CK-4 and ACEA E8\/E11. Its synthetic and premium mineral base blend gives strong wear protection, extended drain capability and low-SAPS aftertreatment compatibility. The 208L drum is the bulk choice for fleets dispensing across many vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA synthetic-blend oil for the latest diesels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBlending synthetic and premium mineral base oils lifts performance where it counts: stronger wear control, better oxidation resistance and the durability to support extended drains. This synthetic-blend heavy-duty diesel oil is engineered on that basis for Euro 6 and next-generation low-emission diesels, meeting API CK-4 and a wide range of ACEA E8 and E11 approvals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects the engine and the emissions system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIts low-SAPS chemistry keeps ash, phosphorus and sulphur down to protect the diesel particulate filter (DPF) and SCR catalyst, while the 10W40 grade holds a robust film under the sustained high loads a modern heavy engine sees. That combination keeps internals clean and protected without compromising the aftertreatment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad modern-diesel approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries an extensive approvals list including Cummins CES 20081 and 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EOS-4.5, MAN M3775 and MTU Type 3.1, suiting late-model on-highway fleets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits late-model trucks and buses and mixed fleets running modern low-emission diesels, where the extra durability of a synthetic blend supports longer drains. Confirm the grade and approval your engine specifies before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrains and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs a synthetic-blend CK-4 oil, ProFleet LS Plus 10W40 supports extended drains and holds up under the sustained loads Euro 6 engines generate, but the interval to follow is the one in the vehicle's service schedule for its duty, shortened for severe conditions. Change the filter with the oil and keep top-ups clean. Its low-SAPS chemistry makes it safe for engines with a diesel particulate filter and SCR system, so confirm the grade and approval the newest engines specify before standardising on it across a fleet. The synthetic-blend durability is what turns those longer drains into real savings without giving up protection on modern low-emission diesels.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479968374863,"sku":"1495.28","price":2200.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1495-28-profleet-ls-plus-10w40-synthetic-blend.webp?v=1793486789"},{"product_id":"1211-20","title":"1211.20 80W90 Outboard Gear Oil 20L","description":"\u003cp\u003eValvoline 80W90 Outboard Gear Oil is a marine gear oil for outboard and sterndrive lower units. It carries extreme-pressure additives to protect the loaded gears in the gearcase and resists the water washout a lower unit lives with, keeping a protective film even in salt water. Supplied in a 20L pack for workshops and marine servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGear oil for outboard and sterndrive lower units\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe gearcase at the bottom of an outboard leg runs loaded gears in a place that is constantly exposed to water, so it needs both strong gear protection and resistance to water washout. This 80W90 marine gear oil delivers both, carrying extreme-pressure additives for the loaded gears while holding its film even in salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtreme-pressure protection that resists water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe oil carries extreme-pressure additives to protect the loaded gears in the gearcase against the high-pressure contact that drives wear, and it is formulated to resist the water washout a lower unit lives with, holding its protective film even in salt water. That combination is what keeps a gearcase reliable over a season of use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMarine-matched approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is suited to the lower-unit requirements of a wide range of outboard makes, and its corrosion protection guards the gearcase internals in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits marine workshops and operators servicing outboard and sterndrive lower units. Confirm the gear oil your engine maker specifies for the gearcase before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eServicing the lower unit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLower-unit oil is a key service item because water in the gearcase quickly ruins the gears, so change it at the maker's interval and inspect the drained oil: a milky appearance signals water ingress and a seal that needs attention before more damage is done. Fill the gearcase from the bottom drain until oil appears at the top vent, which pushes air out and ensures the case is full. The extreme-pressure additives protect the loaded gears while the formulation resists water washout, but a sound seal and regular changes are what keep a lower unit reliable through a season of use in fresh or salt water.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479976829007,"sku":"1211.20","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1211-20-80w90-outboard-gear-oil-20l.webp?v=1793486789"},{"product_id":"1054-05","title":"1054.05 XLD Premium 20W50 Mineral Engine Oil 5L","description":"\u003cp\u003eValvoline XLD Premium 20W50 is a mineral multigrade engine oil for older and higher-mileage petrol engines, and for warm-climate running where a heavier film earns its keep. The 50 hot grade suits the looser clearances of an aged engine, helping hold oil pressure and control oil consumption, while its zinc anti-wear chemistry protects against deposits and wear. Meets API SL\/CF. Supplied in a 5L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA mineral multigrade for older and higher-mileage engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs a petrol engine ages, its internal clearances open up, and a heavier oil grade helps hold oil pressure and control the consumption that comes with wear. This 20W50 mineral multigrade is chosen for exactly that, suiting older and higher-mileage engines and warm-climate running where a heavier film earns its keep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the 20W50 grade suits an older engine\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 50 hot grade lays down a thicker film at operating temperature than a lighter oil, which suits the looser clearances of a worn or high-mileage engine and helps keep oil pressure up and consumption down. The 20W cold grade still allows the oil to circulate at start-up. Zinc anti-wear additives protect the bearings and valvetrain, while detergents and dispersants keep deposits in check.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProven protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets API SL and CF, delivering the wear, deposit and corrosion protection an older petrol engine needs across the duty cycle. That makes it a dependable choice for engines past their first life where a modern low-viscosity oil would be too thin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older passenger cars, classics and warm-climate vehicles running a mineral multigrade, particularly engines that have started to use a little oil and benefit from a heavier film. Always check the grade the engine calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuiting the oil to the engine\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 20W50 is chosen deliberately for older and higher-mileage petrol engines, where the heavier film helps hold pressure and control consumption in worn clearances, and for warm climates where a thicker oil stays in grade. It is not the right choice for a modern engine that specifies a low-viscosity grade such as 5W30, where a heavy oil would slow cold flow and hurt economy, so always check the engine's requirement first. On an older engine that has started to use a little oil, this grade often steadies consumption and quietens the top end. Change it at sensible intervals, since an older engine benefits from fresh oil and clean deposits control.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479978729551,"sku":"1054.05","price":50.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1054-05-premium-20w50-mineral-engine-oil-5l.webp?v=1785301058"},{"product_id":"1413-20","title":"1413.20 Professional Multi-Vehicle 5W30 Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline Professional Multi-Vehicle 5W30 is a full synthetic, mid-SAPS engine oil built for the realities of modern mixed fleets: tight clearances, hotter combustion and emissions hardware that cannot afford to clog. Consolidating up to five oils from the Valvoline range, it covers modern petrol engines including GDI and TGDI, and diesels with DPFs, meeting ACEA C2\/C3 and API SP. The 20L pack suits workshops rationalising their oil stock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne oil that replaces several on the shelf\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConsolidation is the whole point of a multi-vehicle oil: fewer products on the shelf without compromising protection. This full synthetic, mid-SAPS 5W30 is designed to cover up to five oils from the Valvoline range in one, suiting modern petrol engines including GDI and turbo-GDI, and diesels fitted with a particulate filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModern engines, emissions hardware included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits modern petrol engines including gasoline direct-injection (GDI) and turbo-GDI, and diesels fitted with a diesel particulate filter (DPF). The mid-SAPS chemistry keeps ash, phosphorus and sulphur down to protect that aftertreatment hardware, while the full synthetic base delivers strong wear protection and cleanliness across tight-clearance, hotter-running modern engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA C2 and C3 and API SP with Mercedes-Benz 229.31, so one oil matches the requirement across a wide slice of the modern service book.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing mixed modern fleets that want one versatile 5W30. Because it is a mid-SAPS oil, confirm that the vehicles you service accept a C2\/C3 5W30 before standardising on it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConsolidating stock without cutting corners\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe value of a multi-vehicle oil is fewer products on the shelf, but it only works where the vehicles genuinely accept the specification, so confirm each vehicle accepts an ACEA C2\/C3 5W30 before using it as a single oil, since some engines still need a dedicated grade. For the wide range it does cover, including modern GDI and turbo petrol engines and DPF diesels, it simplifies servicing without compromising protection. Follow each vehicle's service schedule and top up with the same specification. The mid-SAPS chemistry protects emissions hardware and the full synthetic base keeps modern engines clean, so one oil can genuinely replace several in a mixed workshop.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479986659407,"sku":"1413.20","price":269.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1413-20-professional-milti-vehicle-5w30-synthetic-engine-oil-20l.webp?v=1793487099"},{"product_id":"1413-28","title":"1413.28 Professional Multi-Vehicle 5W30 Synthetic Engine Oil 208L","description":"\u003cp\u003eValvoline Professional Multi-Vehicle 5W30 is a full synthetic, mid-SAPS engine oil that consolidates up to five oils from the Valvoline range into one, covering modern petrol engines including GDI and TGDI and diesels with DPFs. Meeting ACEA C2\/C3 and API SP, it protects emissions hardware while keeping engines clean. The 208L drum is the bulk choice for high-volume workshops dispensing from a pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne oil that replaces several on the shelf\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConsolidation is the whole point of a multi-vehicle oil: fewer products on the shelf without compromising protection. This full synthetic, mid-SAPS 5W30 is designed to cover up to five oils from the Valvoline range in one, suiting modern petrol engines including GDI and turbo-GDI, and diesels fitted with a particulate filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModern engines, emissions hardware included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits modern petrol engines including gasoline direct-injection (GDI) and turbo-GDI, and diesels fitted with a diesel particulate filter (DPF). The mid-SAPS chemistry keeps ash, phosphorus and sulphur down to protect that aftertreatment hardware, while the full synthetic base delivers strong wear protection and cleanliness across tight-clearance, hotter-running modern engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA C2 and C3 and API SP with Mercedes-Benz 229.31, so one oil matches the requirement across a wide slice of the modern service book.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing mixed modern fleets that want one versatile 5W30. Because it is a mid-SAPS oil, confirm that the vehicles you service accept a C2\/C3 5W30 before standardising on it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConsolidating stock without cutting corners\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe value of a multi-vehicle oil is fewer products on the shelf, but it only works where the vehicles genuinely accept the specification, so confirm each vehicle accepts an ACEA C2\/C3 5W30 before using it as a single oil, since some engines still need a dedicated grade. For the wide range it does cover, including modern GDI and turbo petrol engines and DPF diesels, it simplifies servicing without compromising protection. Follow each vehicle's service schedule and top up with the same specification. The mid-SAPS chemistry protects emissions hardware and the full synthetic base keeps modern engines clean, so one oil can genuinely replace several in a mixed workshop.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479987544143,"sku":"1413.28","price":1900.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1413-28-professional-multi-vehicle-5w30-synthetic-engine-oil.webp?v=1793486789"},{"product_id":"1280-20","title":"1280.20 Premium Mono 10W Engine Oil 20L","description":"\u003cp\u003eValvoline Premium Mono 10W is an SAE 10W monograde engine oil engineered for Detroit Diesel two-stroke engines and other applications requiring API CF or SG oils. Its zinc anti-wear technology and strong deposit control keep pistons clean under high-temperature, high-speed running and protect against corrosive combustion gases. Supplied in a 20L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA monograde built for two-stroke diesels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo-stroke diesels have specific needs, and a monograde matched to them protects better than a general multigrade the engine was never designed around. This SAE 10W monograde is engineered for Detroit Diesel two-stroke engines and other applications requiring an API CF or SG oil, controlling deposits and wear under hard, hot running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeposit control and wear protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese engines run hot and fast, and piston deposits are a real failure path. The formulation controls those deposits under high-temperature, high-speed conditions, while advanced zinc anti-wear additives protect the bearings and cylinders. It also resists the corrosive combustion gases that attack internals in this type of engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right specification\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets API CF and SG, the monograde specification these engines call for. Using the grade and specification the engine was designed around is what delivers clean running and full protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits two-stroke diesel engines and other equipment specifying an SAE 10W monograde. Confirm the grade and specification your engine requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the monograde to the engine\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn SAE 10W monograde is a specific choice for two-stroke diesels such as Detroit Diesel and equipment calling for an API CF or SG oil, and it should be used where that grade is specified rather than as a general engine oil. Follow the engine maker's service interval, since these high-speed engines build deposits and face corrosive combustion gases that fresh oil helps control. Keep top-ups clean and to the same grade. In the engines it is designed for, the deposit control and zinc anti-wear protection keep pistons clean and internals protected under hard, hot running, which is exactly what a two-stroke diesel demands from its oil.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479989280847,"sku":"1280.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1280-20-premium-mono-10w-engine-oil-20l-0.webp?v=1785301060"},{"product_id":"1278-20","title":"1278.20 VPS 10W30 Synthetic Blend Engine Oil 20L","description":"\u003cp\u003eValvoline Professional Series 10W30 is a workshop-exclusive synthetic blend engine oil for modern petrol vehicles, built to deliver consistent protection without overthinking it. Meeting the latest API SP and ILSAC GF-6A\/GF-7A, it flows well on cold start and holds a stable film at temperature, guarding against heat, deposits and wear. The 20L pack suits workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA workshop synthetic blend for modern petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Professional Series is built for the trade, where dependable, current-spec protection across a range of vehicles matters more than a shelf full of niche grades. This workshop-exclusive synthetic blend 10W30 is made on that basis for modern petrol vehicles, flowing well on cold start and holding a stable film at temperature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReliable protection from start-up to shutdown\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe synthetic blend base flows well on cold start and holds a stable film at operating temperature, guarding against the heat, deposits and wear that stress an engine through its duty cycle. Its additive technology keeps the engine clean between services, which is what a workshop needs from a high-turnover oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent-standard performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets the latest API SP and ILSAC GF-6A and GF-7A standards, carrying up-to-date petrol engine protection including deposit and wear control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing modern petrol passenger and light commercial vehicles that specify a 10W30. Confirm the grade a vehicle calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA workshop oil, sensibly used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Professional Series is built for the trade, so it makes sense as a high-turnover workshop oil for modern petrol vehicles specifying a 10W30, with the grade always confirmed against the vehicle. Follow each vehicle's service schedule for oil and filter changes, shortening the interval for stop-start or short-trip driving that works the oil harder. Top up with the same grade, and switching between oils of the same specification at a change is straightforward. Meeting the latest API SP and ILSAC GF-6A and GF-7A, it carries current petrol engine protection, which is what lets a workshop use one dependable oil across a range of modern vehicles with confidence.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479994163279,"sku":"1278.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1278-20-vps-synthetic-blend-engine-oil-20l.webp?v=1788409618"},{"product_id":"1278-28","title":"1278.28 VPS 10W30 Synthetic Blend Engine Oil 208L","description":"\u003cp\u003eValvoline Professional Series 10W30 is a workshop-exclusive synthetic blend engine oil for modern petrol vehicles, meeting API SP and ILSAC GF-6A\/GF-7A. It combines good cold-start flow with stable hot-film protection, guarding engines from heat, deposits and wear. The 208L drum is the bulk choice for high-volume workshops dispensing from a pump or tap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA workshop synthetic blend for modern petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Professional Series is built for the trade, where dependable, current-spec protection across a range of vehicles matters more than a shelf full of niche grades. This workshop-exclusive synthetic blend 10W30 is made on that basis for modern petrol vehicles, flowing well on cold start and holding a stable film at temperature.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReliable protection from start-up to shutdown\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe synthetic blend base flows well on cold start and holds a stable film at operating temperature, guarding against the heat, deposits and wear that stress an engine through its duty cycle. Its additive technology keeps the engine clean between services, which is what a workshop needs from a high-turnover oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent-standard performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets the latest API SP and ILSAC GF-6A and GF-7A standards, carrying up-to-date petrol engine protection including deposit and wear control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing modern petrol passenger and light commercial vehicles that specify a 10W30. Confirm the grade a vehicle calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA workshop oil, sensibly used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Professional Series is built for the trade, so it makes sense as a high-turnover workshop oil for modern petrol vehicles specifying a 10W30, with the grade always confirmed against the vehicle. Follow each vehicle's service schedule for oil and filter changes, shortening the interval for stop-start or short-trip driving that works the oil harder. Top up with the same grade, and switching between oils of the same specification at a change is straightforward. Meeting the latest API SP and ILSAC GF-6A and GF-7A, it carries current petrol engine protection, which is what lets a workshop use one dependable oil across a range of modern vehicles with confidence.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479997145167,"sku":"1278.28","price":1700.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1278-28-vps-10w30-synthetic-blend-engine-oil.webp?v=1793486789"},{"product_id":"1279-20","title":"1279.20 VPS 10W40 Synthetic Blend Engine Oil 20L","description":"\u003cp\u003eValvoline Professional Series 10W40 is a workshop-exclusive synthetic blend engine oil that combines synthetic and mineral base stocks for dependable protection day in, day out. With a heavier 40 hot grade and ACEA A3\/B4 plus VW and Mercedes-Benz coverage, it suits engines needing more body and stronger high-temperature performance. The 20L pack suits workshops servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier workshop synthetic blend\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome petrol engines need a heavier hot film or run hotter under load, and a 10W40 is the grade that suits them. This workshop-exclusive synthetic blend combines synthetic and mineral base stocks for dependable everyday protection, carrying ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals for the engines that call for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection under heat and load\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe synthetic blend base improves oxidation resistance and film stability over a straight mineral oil, so it holds up under sustained heat, while the 40 hot grade provides a firmer film than a 30 for engines designed around it. Its additive package keeps deposits down and protects against wear across the service interval.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEuropean approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals, the standards petrol engines of this type are built around, so it matches the requirement as well as the grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing petrol vehicles that specify a 10W40, particularly European models. Confirm the grade and any approval a vehicle requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA workshop oil, sensibly used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis synthetic blend suits workshops servicing petrol vehicles that specify a 10W40, particularly European models under its ACEA A3\/B4 and VW and Mercedes-Benz approvals, so confirm the grade and approval a vehicle needs before use. Follow the service schedule and shorten it for severe or short-trip duty. Top up with the same grade, and moving to a synthetic of the same specification at a change is fine. The heavier 40 film suits engines that run hotter or were designed around a 40 grade, holding protection where a 30 would thin, while the additive package keeps the engine clean, which is exactly what a workshop wants from a dependable trade oil.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479998521423,"sku":"1279.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1279-20-vps-10w40-synthetic-blend-engine-oil-20l.webp?v=1785301069"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/Engine-Oil_Category-Image.webp?v=1794565758","url":"https:\/\/geelongfiltersales.com.au\/collections\/engine-oils.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}