{"title":"Heavy Duty Transmission Fluids","description":"\u003cp\u003eHeavy-duty transmission fluid for powershift, torque-converter and heavy-duty automatic transmissions in trucks, buses, earthmoving, mining and agricultural machinery. These units run high loads, high heat and long hours, and the fluid has to hold its friction characteristics to protect clutch packs, keep shifts consistent and stop torque converters overheating.\u003c\/p\u003e\u003cp\u003eMany off-highway powershift transmissions and final drives are specified to the TO-4 standard in a straight SAE grade, while heavy-duty on-road automatics are usually specified by the transmission maker's own approval list. Order the spec and grade the OEM lists for each compartment and ambient temperature. \u003cstrong\u003ePut engine oil or a general ATF in a powershift box and the clutches can glaze or slip.\u003c\/strong\u003e The notes below explain TO-4 grades.\u003c\/p\u003e","products":[{"product_id":"1218-20","title":"1218.20 Valtorque C4-50 Transmission Oil 20L","description":"\u003cp\u003eValvoline Valtorque C4-50 is a monograde SAE 50 transmission and drivetrain oil built to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. The heavier SAE 50 grade holds a thicker film for hot-running final drives and heavy load, while maintaining the defined TO-4 friction. The 20L pack suits workshops servicing plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier TO-4 grade for hot final drives\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal drives and gearing on heavy plant run hot under sustained load, and a heavier grade holds a robust film there where a lighter oil would thin. This monograde SAE 50, built to the Caterpillar TO-4 requirement, provides that film for off-highway powershift transmissions, wet brakes and heavily loaded final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilm strength with TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal drives and gearing on heavy plant run hot under sustained load, and the SAE 50 grade holds a robust film there while still meeting the TO-4 friction requirement that powershift clutches and oil-immersed brakes depend on. That lets the same oil protect the heavily loaded final drives and support the powershift transmission and wet brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4 and Allison C-4, covering off-highway powershift drivetrains and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with hot, heavily loaded final drives specifying an SAE 50 TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy final-drive use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 50 grade suits hot-running, heavily loaded final drives that need a thicker film than an SAE 30 provides, so it belongs where the machine specifies a 50 TO-4 oil rather than as a general powershift fill. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid protects the transmission, converter, wet brakes and final drives. The TO-4 friction specification keeps powershift clutches and oil-immersed brakes working correctly, so match the oil to that requirement. Change sooner under severe duty, and confirm the grade the machine calls for, as final-drive and transmission grades can differ on the same equipment.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478632259663,"sku":"1218.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1218-20-valtorque-c4-50-transmission-oil-20l.webp?v=1785300672"},{"product_id":"1221-20","title":"1221.20 Valtorque C4-30 Transmission Oil 20L","description":"\u003cp\u003eValvoline Valtorque C4-30 is a monograde SAE 30 transmission and drivetrain oil built to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. As the most common powershift grade, its clutch and brake friction control keeps shifts crisp and oil-immersed brakes quiet. The 20L pack suits workshops servicing plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA TO-4 powershift oil for off-highway drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and hold cleanly, and the Caterpillar TO-4 standard sets that requirement. This monograde SAE 30 oil is built to meet it for off-highway powershift transmissions, torque converters, wet brakes and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the TO-4 friction specification matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and to hold and release the brakes without chatter or slip. TO-4 sets that friction requirement, and Valtorque C4-30 is built to meet it, so the transmission shifts cleanly and the wet brakes work correctly. The same oil protects the torque converter and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1, covering the powershift drivetrains found on most off-highway equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with powershift transmissions, torque converters, wet brakes and final drives specifying an SAE 30 TO-4 oil. Where a cold climate or a heavier final-drive requirement applies, a lighter or heavier grade may suit, so check the equipment maker's recommendation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the powershift friction right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowershift transmissions and their wet brakes are matched to the TO-4 friction specification, so using a TO-4 oil of the correct grade is what keeps shifts crisp and wet brakes free of chatter and slip; substituting a general engine oil can upset that behaviour. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid serves the transmission, converter, brakes and final drives. Change sooner under severe duty. SAE 30 is the common powershift grade, but a colder climate or a heavier final-drive requirement may call for a lighter or heavier TO-4 grade, so confirm what the machine specifies.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478649331791,"sku":"1221.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1221-20-valtorque-c4-30-transmission-oil-20l.webp?v=1785300675"},{"product_id":"1218-51","title":"1218.51 Valtorque C4-50 Transmission Oil 205L","description":"\u003cp\u003eValvoline Valtorque C4-50 is a monograde SAE 50 transmission and drivetrain oil to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. Its heavier film suits hot-running final drives under heavy load, with the correct TO-4 friction. The 205L drum is the bulk choice for fleets and sites running heavy plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier TO-4 grade for hot final drives\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal drives and gearing on heavy plant run hot under sustained load, and a heavier grade holds a robust film there where a lighter oil would thin. This monograde SAE 50, built to the Caterpillar TO-4 requirement, provides that film for off-highway powershift transmissions, wet brakes and heavily loaded final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilm strength with TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal drives and gearing on heavy plant run hot under sustained load, and the SAE 50 grade holds a robust film there while still meeting the TO-4 friction requirement that powershift clutches and oil-immersed brakes depend on. That lets the same oil protect the heavily loaded final drives and support the powershift transmission and wet brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4 and Allison C-4, covering off-highway powershift drivetrains and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with hot, heavily loaded final drives specifying an SAE 50 TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy final-drive use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 50 grade suits hot-running, heavily loaded final drives that need a thicker film than an SAE 30 provides, so it belongs where the machine specifies a 50 TO-4 oil rather than as a general powershift fill. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid protects the transmission, converter, wet brakes and final drives. The TO-4 friction specification keeps powershift clutches and oil-immersed brakes working correctly, so match the oil to that requirement. Change sooner under severe duty, and confirm the grade the machine calls for, as final-drive and transmission grades can differ on the same equipment.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478983860303,"sku":"1218.51","price":1600.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1218-51-valtorque-c4-50-transmission-oil-205l.webp?v=1793486720"},{"product_id":"1221-51","title":"1221.51 Valtorque C4-30 Transmission Oil 205L","description":"\u003cp\u003eValvoline Valtorque C4-30 is a monograde SAE 30 transmission and drivetrain oil to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. Its defined friction keeps powershift clutches and oil-immersed brakes working correctly. The 205L drum is the bulk choice for fleets and sites running heavy earthmoving equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA TO-4 powershift oil for off-highway drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and hold cleanly, and the Caterpillar TO-4 standard sets that requirement. This monograde SAE 30 oil is built to meet it for off-highway powershift transmissions, torque converters, wet brakes and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the TO-4 friction specification matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and to hold and release the brakes without chatter or slip. TO-4 sets that friction requirement, and Valtorque C4-30 is built to meet it, so the transmission shifts cleanly and the wet brakes work correctly. The same oil protects the torque converter and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1, covering the powershift drivetrains found on most off-highway equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with powershift transmissions, torque converters, wet brakes and final drives specifying an SAE 30 TO-4 oil. Where a cold climate or a heavier final-drive requirement applies, a lighter or heavier grade may suit, so check the equipment maker's recommendation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the powershift friction right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowershift transmissions and their wet brakes are matched to the TO-4 friction specification, so using a TO-4 oil of the correct grade is what keeps shifts crisp and wet brakes free of chatter and slip; substituting a general engine oil can upset that behaviour. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid serves the transmission, converter, brakes and final drives. Change sooner under severe duty. SAE 30 is the common powershift grade, but a colder climate or a heavier final-drive requirement may call for a lighter or heavier TO-4 grade, so confirm what the machine specifies.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478989103183,"sku":"1221.51","price":1600.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1221-51-valtorque-c4-30-transmission-oil-205l.webp?v=1793486720"},{"product_id":"1248-20","title":"1248.20 Valtorque C4-10W Transmission Oil 20L","description":"\u003cp\u003eValvoline Valtorque C4-10W is a monograde SAE 10W transmission and drivetrain oil built to the Caterpillar TO-4 requirement, formulated for cold-climate and cold-start powershift operation. Its low-temperature fluidity gets oil moving fast to transmissions, torque converters, wet brakes and final drives, while holding the TO-4 friction those systems need. The 20L pack suits workshops servicing plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA cold-flow TO-4 oil for powershift drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. A monograde SAE 10W built to the Caterpillar TO-4 requirement solves that with fast low-temperature flow, while still holding the friction those powershift clutches and brakes need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold performance without losing TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. The SAE 10W grade solves that with fast low-temperature flow, while still holding the TO-4 friction character that powershift clutches and oil-immersed brakes need to work correctly. It protects the transmission, torque converter, wet brakes and final drives together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits cold-climate earthmoving and mining plant needing rapid cold-start flow through a powershift drivetrain specifying an SAE 10W TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold-climate powershift use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 10W grade is chosen so oil reaches the transmission and wet brakes quickly on a cold start, which protects a powershift drivetrain in the first minutes before it warms. Use it where the machine specifies a 10W TO-4 oil for cold conditions, follow the maker's service interval and grade recommendation, and keep the oil clean since it serves the transmission, converter, brakes and final drives together. The TO-4 friction specification is what keeps shifts crisp and wet brakes free of chatter, so match the oil to that requirement rather than substituting a general engine oil. Change sooner under severe or dusty duty.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479026065487,"sku":"1248.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1248-20-valtorque-c4-10w-transmission-oil-20l.webp?v=1785300678"},{"product_id":"1248-51","title":"1248.51 Valtorque C4-10W Transmission Oil 205L","description":"\u003cp\u003eValvoline Valtorque C4-10W is a monograde SAE 10W transmission and drivetrain oil to the Caterpillar TO-4 requirement, built for cold-start and cold-climate powershift operation. Its low-temperature fluidity protects transmissions, converters, wet brakes and final drives from the first turn, holding the correct TO-4 friction. The 205L drum is the bulk choice for fleets and sites.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA cold-flow TO-4 oil for powershift drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. A monograde SAE 10W built to the Caterpillar TO-4 requirement solves that with fast low-temperature flow, while still holding the friction those powershift clutches and brakes need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold performance without losing TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. The SAE 10W grade solves that with fast low-temperature flow, while still holding the TO-4 friction character that powershift clutches and oil-immersed brakes need to work correctly. It protects the transmission, torque converter, wet brakes and final drives together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits cold-climate earthmoving and mining plant needing rapid cold-start flow through a powershift drivetrain specifying an SAE 10W TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold-climate powershift use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 10W grade is chosen so oil reaches the transmission and wet brakes quickly on a cold start, which protects a powershift drivetrain in the first minutes before it warms. Use it where the machine specifies a 10W TO-4 oil for cold conditions, follow the maker's service interval and grade recommendation, and keep the oil clean since it serves the transmission, converter, brakes and final drives together. The TO-4 friction specification is what keeps shifts crisp and wet brakes free of chatter, so match the oil to that requirement rather than substituting a general engine oil. Change sooner under severe or dusty duty.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479035666511,"sku":"1248.51","price":1700.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1248-51-valtorque-c4-10w-transmission-oil-205l.webp?v=1793486720"},{"product_id":"1382-20","title":"1382.20 SynGard E-386 Synthetic Transmission Oil 20L","description":"\u003cp\u003eValvoline SynGard E-386 is an advanced synthetic transmission fluid engineered for heavy-duty manual truck transmissions, delivering peak protection and extended service life in the harshest conditions. Meeting API MT-1 with Eaton PS-386, Mack, Meritor and Volvo approvals, it protects gears and synchronisers while its wide temperature performance keeps shifting smooth. The 20L pack suits fleet workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA synthetic fluid for heavy-duty manual transmissions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeavy-truck manual gearboxes work under high load and heat over long distances, which is exactly where a synthetic fluid outperforms a conventional one. This advanced synthetic transmission fluid holds its viscosity and protective film across a wide temperature range, protecting the gears and synchronisers while keeping shifting smooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection and extended life\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe synthetic base holds its viscosity and protective film across a wide temperature range, protecting the gears and synchronisers under sustained load while resisting the thermal breakdown that shortens fluid life. That durability supports the extended drain intervals that keep trucks earning and reduce running costs, and it keeps shifting smooth in cold and hot conditions alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide truck approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets API MT-1 with approvals including Eaton PS-386, Mack, Meritor and Volvo, the standards heavy-duty manual truck transmissions call for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops and fleets servicing heavy-duty manual truck transmissions. Confirm the fluid specification your gearbox requires before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManual truck transmission service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSynGard E-386 is a fluid for heavy-duty manual truck transmissions, so confirm your gearbox specifies an API MT-1 fluid with the relevant Eaton, Mack, Meritor or Volvo approval before filling, since manual boxes and their synchronisers are matched to a particular fluid. Follow the maker's service interval, which the synthetic base is designed to extend, and change sooner under severe duty. Fill to the correct level. The synthetic base holds its viscosity and protective film across a wide temperature range, protecting gears and synchronisers under load while keeping shifting smooth in cold and hot conditions, which is what supports the long drains that keep a truck fleet's running costs down.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479077380175,"sku":"1382.20","price":900.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1382-20-syngard-atf-e386-synthetic-transmission-fluid-20l.webp?v=1785300711"},{"product_id":"1382-51","title":"1382.51 SynGard E-386 Synthetic Transmission Fluid 205L","description":"\u003cp\u003eValvoline SynGard E-386 is an advanced synthetic transmission fluid for heavy-duty manual truck transmissions, built for peak protection and extended service life. Meeting API MT-1 with Eaton PS-386, Mack, Meritor and Volvo approvals, it protects gears and synchronisers and holds smooth shifting across a wide temperature range. The 205L drum is the bulk choice for fleets and depots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA synthetic fluid for heavy-duty manual transmissions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeavy-truck manual gearboxes work under high load and heat over long distances, which is exactly where a synthetic fluid outperforms a conventional one. This advanced synthetic transmission fluid holds its viscosity and protective film across a wide temperature range, protecting the gears and synchronisers while keeping shifting smooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection and extended life\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe synthetic base holds its viscosity and protective film across a wide temperature range, protecting the gears and synchronisers under sustained load while resisting the thermal breakdown that shortens fluid life. That durability supports the extended drain intervals that keep trucks earning and reduce running costs, and it keeps shifting smooth in cold and hot conditions alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide truck approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets API MT-1 with approvals including Eaton PS-386, Mack, Meritor and Volvo, the standards heavy-duty manual truck transmissions call for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops and fleets servicing heavy-duty manual truck transmissions. Confirm the fluid specification your gearbox requires before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManual truck transmission service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSynGard E-386 is a fluid for heavy-duty manual truck transmissions, so confirm your gearbox specifies an API MT-1 fluid with the relevant Eaton, Mack, Meritor or Volvo approval before filling, since manual boxes and their synchronisers are matched to a particular fluid. Follow the maker's service interval, which the synthetic base is designed to extend, and change sooner under severe duty. Fill to the correct level. The synthetic base holds its viscosity and protective film across a wide temperature range, protecting gears and synchronisers under load while keeping shifting smooth in cold and hot conditions, which is what supports the long drains that keep a truck fleet's running costs down.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479097860175,"sku":"1382.51","price":6000.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1382-51-syngard-e-386-synthetic-transmission-fluid-205l.webp?v=1793486757"},{"product_id":"1409-20","title":"1409.20 Valtorque C4-60 Transmission Oil 20L","description":"\u003cp\u003eValvoline Valtorque C4-60 is a monograde SAE 60 final-drive fluid built to the Caterpillar TO-4 requirement, delivering the heaviest film in the range for high-load final drives and gearing in off-highway machinery. Its thick, stable film maximises load-carrying capacity while holding the TO-4 friction wet brakes rely on. Supplied in a 20L pack for workshops servicing heavy plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe heaviest TO-4 grade for high-load final drives\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhere final drives carry the greatest load, the thickest film provides the most protection, and that is the job of an SAE 60 grade. Built to the Caterpillar TO-4 requirement, this monograde delivers the heaviest film in the range for high-load final drives and gearing in off-highway machinery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaximum film for the hardest-loaded gearing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 60 grade maximises the oil film that stays between heavily loaded gear teeth, resisting the squeeze-out that low speeds and high torque drive, while still meeting the TO-4 friction requirement that oil-immersed brakes rely on. That combination suits the final drives and gearing that take the most punishment on heavy plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2 and API GL-4, covering the high-load final-drive applications on off-highway machinery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits off-highway machinery with the highest-load final drives and gearing specifying an SAE 60 TO-4 fluid. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighest-load final-drive use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 60 grade provides the heaviest film in the range for the most heavily loaded final drives and gearing, so it is used specifically where the machine calls for a 60 TO-4 fluid, not as a general fill. Follow the equipment maker's service interval and grade recommendation, and keep the fluid clean. The TO-4 friction specification keeps oil-immersed brakes working correctly, so match the fluid to that requirement rather than substituting another oil. Change sooner under severe duty. Because final-drive and transmission grades can differ on the same machine, confirm exactly what each compartment specifies so the heaviest-loaded gearing gets the film it needs.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479912538191,"sku":"1409.2","price":229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1409-20-valtorque-c4-60-transmission-oil-20l.webp?v=1785301050"},{"product_id":"1248","title":"1248 IBC Valtorque C4-10W Transmission Oil 1000L","description":"\u003cp\u003eValvoline Valtorque C4-10W is a monograde SAE 10W transmission and drivetrain oil built to the Caterpillar TO-4 requirement, formulated for cold-climate and cold-start powershift operation. Its low-temperature fluidity delivers fast flow to transmissions, converters, wet brakes and final drives while holding the correct TO-4 friction. Supplied in a 1000L IBC for high-volume dispensing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA cold-flow TO-4 oil for powershift drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. A monograde SAE 10W built to the Caterpillar TO-4 requirement solves that with fast low-temperature flow, while still holding the friction those powershift clutches and brakes need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold performance without losing TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. The SAE 10W grade solves that with fast low-temperature flow, while still holding the TO-4 friction character that powershift clutches and oil-immersed brakes need to work correctly. It protects the transmission, torque converter, wet brakes and final drives together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits cold-climate earthmoving and mining plant needing rapid cold-start flow through a powershift drivetrain specifying an SAE 10W TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold-climate powershift use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 10W grade is chosen so oil reaches the transmission and wet brakes quickly on a cold start, which protects a powershift drivetrain in the first minutes before it warms. Use it where the machine specifies a 10W TO-4 oil for cold conditions, follow the maker's service interval and grade recommendation, and keep the oil clean since it serves the transmission, converter, brakes and final drives together. The TO-4 friction specification is what keeps shifts crisp and wet brakes free of chatter, so match the oil to that requirement rather than substituting a general engine oil. Change sooner under severe or dusty duty.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479928004687,"sku":"1248","price":7700.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1248-ibc-valtorque-c4-10w-transmission-oil-1000l.webp?v=1785301053"},{"product_id":"1221","title":"1221 IBC Valtorque C4-30 Transmission Oil 1000L","description":"\u003cp\u003eValvoline Valtorque C4-30 is a monograde SAE 30 transmission and drivetrain oil built to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. As the most common powershift grade, its clutch and brake friction keeps shifts crisp and wet brakes quiet. Supplied in a 1000L IBC for high-volume dispensing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA TO-4 powershift oil for off-highway drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and hold cleanly, and the Caterpillar TO-4 standard sets that requirement. This monograde SAE 30 oil is built to meet it for off-highway powershift transmissions, torque converters, wet brakes and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the TO-4 friction specification matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and to hold and release the brakes without chatter or slip. TO-4 sets that friction requirement, and Valtorque C4-30 is built to meet it, so the transmission shifts cleanly and the wet brakes work correctly. The same oil protects the torque converter and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1, covering the powershift drivetrains found on most off-highway equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with powershift transmissions, torque converters, wet brakes and final drives specifying an SAE 30 TO-4 oil. Where a cold climate or a heavier final-drive requirement applies, a lighter or heavier grade may suit, so check the equipment maker's recommendation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the powershift friction right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowershift transmissions and their wet brakes are matched to the TO-4 friction specification, so using a TO-4 oil of the correct grade is what keeps shifts crisp and wet brakes free of chatter and slip; substituting a general engine oil can upset that behaviour. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid serves the transmission, converter, brakes and final drives. Change sooner under severe duty. SAE 30 is the common powershift grade, but a colder climate or a heavier final-drive requirement may call for a lighter or heavier TO-4 grade, so confirm what the machine specifies.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":46485030371407,"sku":"1221","price":7770.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1221-valtorque-c4-30-ibc.webp?v=1788351256"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/Heavy-Duty-Transmission-Fluid_Category-Image.webp?v=1781693475","url":"https:\/\/geelongfiltersales.com.au\/collections\/hd-transmission-fluid.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}