{"title":"Hoods \u0026 Caps","description":"\u003cp\u003eHoods and caps sit on the open end of an air intake or exhaust stack and stop rain, snow, leaves and coarse debris falling straight down the pipe. Inlet hoods turn the intake opening away from the weather, and louvred and ram-air styles help keep larger debris out at speed. Rain caps, mostly fitted to vertical exhaust stacks, have a flap that the exhaust lifts open and gravity closes when the engine stops. They suit trucks, tractors, gensets and machines with upright stacks. Size them on the outside diameter of the pipe they sit on, and check height clearance. Water in the intake soaks the air filter and can block it, while water down an exhaust stack rusts the muffler.\u003c\/p\u003e","products":[{"product_id":"h000473","title":"H000473 Inlet Hood, Plastic, Style C, Rain Shroud, 95 mm (3.75 in) OD Pipe","description":"\u003cp\u003eRain running down a 3.75 inch intake stack ends up in the air cleaner, where a wet element loads with dust and restricts far faster than a dry one. The Donaldson H000473 is a plastic inlet hood that caps a 95 mm (3.75 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 292 mm (11.50 in) across and 130 mm (5.13 in) tall overall, and it adds 92 mm (3.62 in) to the height of the stack. The mounting clamp is included. This model also has a rain shroud on the underside of the hood for extra protection against splash from below.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 55 OEM and aftermarket brands, including Caterpillar 8612994, John Deere RE64099, Volvo 58858044 and Perkins 13000294. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":45476449353807,"sku":"H000473","price":127.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h000473-inlet-hood.jpg?v=1793655786"},{"product_id":"h001377","title":"H001377 Inlet Hood- Plastic, 5.98 in OD, 2.03 in OD Pipe","description":"\u003cp\u003eOn a machine parked out in the weather, a bare vertical intake is an open invitation for rain and debris. The Donaldson H001377 is the plastic inlet hood that caps that intake stack and sheds rain and coarse debris before they reach the pre-cleaner or air filter.\u003c\/p\u003e\n\u003cp\u003eWater drawn down an uncovered intake is a fast way to ruin an air filter and feed the engine contaminated air. This hood is 5.98 in outside diameter to suit a 2.03 in OD intake pipe, and it pairs naturally with a pre-cleaner on the same stack. The mounting clamp is included. Match both the hood OD and the pipe OD to your intake before ordering.\u003c\/p\u003e\n\u003ctable style=\"border-collapse:collapse;margin:1.2em 0;width:auto;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;background:#f4f6f8;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;background:#f4f6f8;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eHood Outside Diameter\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e5.98 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eIntake Pipe OD\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e2.03 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eMounting Clamp\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":45476496703567,"sku":"H001377","price":27.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001377-inlet-hood-plastic.jpg?v=1793655736"},{"product_id":"h001379","title":"H001379 Inlet Hood- Plastic, 5.98 in OD, 3.01 in OD Pipe","description":"\u003cp\u003eOn a machine parked out in the weather, a bare vertical intake is an open invitation for rain and debris. The Donaldson H001379 is the plastic inlet hood that caps that intake stack and sheds rain and coarse debris before they reach the pre-cleaner or air filter.\u003c\/p\u003e\n\u003cp\u003eWater drawn down an uncovered intake is a fast way to ruin an air filter and feed the engine contaminated air. This hood is 5.98 in outside diameter to suit a 3.01 in OD intake pipe, and it pairs naturally with a pre-cleaner on the same stack. The mounting clamp is included. Match both the hood OD and the pipe OD to your intake before ordering.\u003c\/p\u003e\n\u003ctable style=\"border-collapse:collapse;margin:1.2em 0;width:auto;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;background:#f4f6f8;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;background:#f4f6f8;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eHood Outside Diameter\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e5.98 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eIntake Pipe OD\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e3.01 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eMounting Clamp\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":45476499882063,"sku":"H001379","price":46.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001379-inlet-hood-plastic.jpg?v=1793655789"},{"product_id":"p270534","title":"P270534 Rain Cap (Stack Cap), 64 mm \/ 2.5 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270534 rain cap fits the end of 64 mm (2.5 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 64 mm (2.5 in). Cross-referenced across 47 OEM and aftermarket brands, including Caterpillar 0815014, Case IH ND28028AG and New Holland D6NN5C208A. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67858446614607,"sku":"P270534","price":39.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270534-rain-cap.png?v=1793486745"},{"product_id":"p270539","title":"P270539 Rain Cap (Stack Cap), 102 mm \/ 4 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270539 rain cap fits the end of 102 mm (4 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 102 mm (4 in). Cross-referenced across 67 OEM and aftermarket brands, including Caterpillar 541821, Case IH BN310690 and New Holland 707024722. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67858446680143,"sku":"P270539","price":37.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270539-rain-cap.png?v=1793486745"},{"product_id":"x002017","title":"X002017 Inlet Hood, Metal, Style A, 44 mm (1.75 in) OD Pipe","description":"\u003cp\u003eSmall engines on mowers, generators, refrigeration units and compact gear often run a short open intake pipe, and anything that falls into it heads straight for the air cleaner. The Donaldson X002017 is a metal inlet hood that caps a 44 mm (1.75 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style A hood: a domed metal cap on a straight collar that slips over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 105 mm (4.13 in) across and 84 mm (3.31 in) tall overall, and it adds 70 mm (2.75 in) to the height of the stack. Style A hoods are supplied without a clamp, so order one separately to suit the collar.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 35 OEM and aftermarket brands, including Bobcat 6511989, Perkins 13000019, Isuzu X14210017 and Atlas Copco CAP00749. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954484838479,"sku":"X002017","price":90.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-x002017-metal-inlet-hood.jpg?v=1793487230"},{"product_id":"x002018","title":"X002018 Inlet Hood, Metal, Style A, 51 mm (2.00 in) OD Pipe","description":"\u003cp\u003eRain running down an open 2 inch intake pipe ends up in the air cleaner, and a wet element loads up and restricts far faster than a dry one. The Donaldson X002018 is a metal inlet hood that caps a 51 mm (2.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style A hood: a domed metal cap on a straight collar that slips over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. It stands 83 mm (3.25 in) tall overall and it adds 70 mm (2.75 in) to the height of the stack. Style A hoods are supplied without a clamp, so order one separately to suit the collar.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 75 OEM and aftermarket brands, including Caterpillar 777249, John Deere AM34090, Case IH 353019R92 and Perkins 13000050. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954484871247,"sku":"X002018","price":99.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-x002018-metal-inlet-hood.jpg?v=1793487224"},{"product_id":"x001966","title":"X001966 Inlet Hood, Metal, Style A, 64 mm (2.50 in) OD Pipe","description":"\u003cp\u003eSkid steers, scissor lifts and compressors parked outside between jobs collect rain, leaves and nesting material in an uncovered intake stack. The Donaldson X001966 is a metal inlet hood that caps a 64 mm (2.50 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style A hood: a domed metal cap on a straight collar that slips over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 133 mm (5.24 in) across and 101 mm (3.97 in) tall overall, and it adds 89 mm (3.50 in) to the height of the stack. Style A hoods are supplied without a clamp, so order one separately to suit the collar.\u003c\/p\u003e\n\u003cp\u003eDonaldson lists it for Thomas T173, T183HD, T203HD and T233HD skid steer loaders and the Skyjack SJ6832 RT scissor lift.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 81 OEM and aftermarket brands, including Caterpillar 6F4352, John Deere AT33360, Case IH A61276 and Bobcat 5208272. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954484904015,"sku":"X001966","price":112.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-x001966-metal-inlet-hood.jpg?v=1793487220"},{"product_id":"x002014","title":"X002014 Inlet Hood, Metal, Style A, 76 mm (3.00 in) OD Pipe","description":"\u003cp\u003eA 3 inch intake stack left open to the weather lets rain, snow and debris drop straight down towards the air cleaner every time the machine sits idle. The Donaldson X002014 is a metal inlet hood that caps a 76 mm (3.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style A hood: a domed metal cap on a straight collar that slips over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 156 mm (6.13 in) across and 129 mm (5.06 in) tall overall, and it adds 95 mm (3.75 in) to the height of the stack. Style A hoods are supplied without a clamp, so order one separately to suit the collar.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 122 OEM and aftermarket brands, including Caterpillar 663525, John Deere AT40582, Volvo 20002282243 and Perkins 13000209. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954488016975,"sku":"X002014","price":97.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-x002014-metal-inlet-hood.jpg?v=1793487135"},{"product_id":"x001988","title":"X001988 Inlet Hood, Metal, Style A, 95 mm (3.75 in) OD Pipe","description":"\u003cp\u003eTractors, harvesters and loaders with a tall intake stack catch everything that falls from above, from rain to chaff to the odd bird's nest. The Donaldson X001988 is a metal inlet hood that caps a 95 mm (3.75 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style A hood: a domed metal cap on a straight collar that slips over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 205 mm (8.06 in) across and 197 mm (7.75 in) tall overall, and it adds 152 mm (6.00 in) to the height of the stack. Style A hoods are supplied without a clamp, so order one separately to suit the collar.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 75 OEM and aftermarket brands, including Caterpillar 8C8116, John Deere R36452, CLAAS 24558030 and Volvo 21878434. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954488049743,"sku":"X001988","price":261.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-x001988-metal-inlet-hood.jpg?v=1793487130"},{"product_id":"x002015","title":"X002015 Inlet Hood, Metal, Style A, 102 mm (4.00 in) OD Pipe","description":"\u003cp\u003eA 4 inch open intake stack is a big target for rain, snow and debris, and whatever goes in ends up loading the air filter or sitting in the intake. The Donaldson X002015 is a metal inlet hood that caps a 102 mm (4.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style A hood: a domed metal cap on a straight collar that slips over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 205 mm (8.06 in) across and 200 mm (7.88 in) tall overall, and it adds 152 mm (6.00 in) to the height of the stack. Style A hoods are supplied without a clamp, so order one separately to suit the collar.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 31 OEM and aftermarket brands, including Caterpillar 667544, Case IH W13501, Atlas Copco 350426 and New Holland 74661025. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954488082511,"sku":"X002015","price":266.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-x002015-metal-inlet-hood.jpg?v=1793487131"},{"product_id":"h002068","title":"H002068 Inlet Hood- Plastic, 5.98 in OD, 1.78 in OD Pipe","description":"\u003cp\u003eOn a small engine with a bare vertical intake tube, rain and debris have a straight run down to the air filter. The Donaldson H002068 is the Style B plastic inlet hood that caps a 1.78 in OD intake pipe and turns rain, snow and coarse debris away before they reach the pre-cleaner or air filter.\u003c\/p\u003e\n\u003cp\u003eIt is a low-profile cap that adds just 2.52 in to the stack height and secures to the pipe with a single clamp, which is included. The hood is 5.98 in outside diameter. Match the pipe OD to your intake before ordering — the same 5.98 in Style B hood is also stocked for 2.03 in, 2.52 in and 3.01 in OD pipe (\u003ca href=\"\/products\/h001377\"\u003eH001377\u003c\/a\u003e, \u003ca href=\"\/products\/h008208\"\u003eH008208\u003c\/a\u003e, \u003ca href=\"\/products\/h001379\"\u003eH001379\u003c\/a\u003e).\u003c\/p\u003e\n\u003ctable style=\"border-collapse:collapse;margin:1.2em 0;width:auto;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;background:#f4f6f8;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;background:#f4f6f8;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eHood Outside Diameter\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e5.98 in (152 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eIntake Pipe OD\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e1.78 in (45 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eOverall Height\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e3.52 in (89 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eAdded Height\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e2.52 in (64 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eStyle\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eMounting Clamp\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954488803407,"sku":"H002068","price":26.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h002068-inlet-hood-plastic.jpg?v=1793487125"},{"product_id":"h008208","title":"H008208 Inlet Hood- Plastic, 5.98 in OD, 2.52 in OD Pipe","description":"\u003cp\u003eAn open intake stack on a machine that lives outdoors will draw in rain, snow and anything that falls into it. The Donaldson H008208 is the Style B plastic inlet hood that caps a 2.52 in OD intake pipe and sheds rain and coarse debris before they reach the pre-cleaner or air filter.\u003c\/p\u003e\n\u003cp\u003eIt is a low-profile cap that adds just 2.52 in to the stack height and secures to the pipe with a single clamp, which is included. The hood is 5.98 in outside diameter. Match the pipe OD to your intake before ordering — the same 5.98 in Style B hood is also stocked for 1.78 in, 2.03 in and 3.01 in OD pipe (\u003ca href=\"\/products\/h002068\"\u003eH002068\u003c\/a\u003e, \u003ca href=\"\/products\/h001377\"\u003eH001377\u003c\/a\u003e, \u003ca href=\"\/products\/h001379\"\u003eH001379\u003c\/a\u003e).\u003c\/p\u003e\n\u003ctable style=\"border-collapse:collapse;margin:1.2em 0;width:auto;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;background:#f4f6f8;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;background:#f4f6f8;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eHood Outside Diameter\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e5.98 in (152 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eIntake Pipe OD\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e2.52 in (64 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eOverall Height\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e3.52 in (89 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eAdded Height\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003e2.52 in (64 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eStyle\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eMounting Clamp\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:8px 16px;text-align:left;vertical-align:top;border:1px solid #dcdcdc;\"\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954488836175,"sku":"H008208","price":30.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h008208-inlet-hood-plastic.jpg?v=1794198888"},{"product_id":"h001063","title":"H001063 Inlet Hood, Plastic, Style C, 76 mm (3.00 in) OD Pipe","description":"\u003cp\u003eAn open 3 inch intake stack on a loader, roller or compressor collects rain, leaves and debris every time the machine stands outside. The Donaldson H001063 is a plastic inlet hood that caps a 76 mm (3.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 292 mm (11.50 in) across and 149 mm (5.87 in) tall overall, and it adds 92 mm (3.62 in) to the height of the stack. The mounting clamp is included.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 37 OEM and aftermarket brands, including Caterpillar 780382, Massey Ferguson 3301333M1, New Holland TH23558 and Ingersoll Rand 51067585. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954531958863,"sku":"H001063","price":62.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001063-plastic-inlet-hood.jpg?v=1793487121"},{"product_id":"h000472","title":"H000472 Inlet Hood, Plastic, Style C, Rain Shroud, 102 mm (4.00 in) OD Pipe","description":"\u003cp\u003eOn machines that work and park in the weather, an uncovered 4 inch intake stack lets rain, snow and wind-blown debris straight into the intake. The Donaldson H000472 is a plastic inlet hood that caps a 102 mm (4.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 292 mm (11.50 in) across and 129 mm (5.08 in) tall overall, and it adds 86 mm (3.40 in) to the height of the stack. The mounting clamp is included. This model also has a rain shroud on the underside of the hood for extra protection against splash from below.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 66 OEM and aftermarket brands, including John Deere 811917600, Volvo 1014482, Bobcat 6670564 and Cummins C0140199501. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954532024399,"sku":"H000472","price":77.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h000472-plastic-inlet-hood.jpg?v=1793487117"},{"product_id":"h000468","title":"H000468 Inlet Hood, Plastic, Style C, 114 mm (4.50 in) OD Pipe","description":"\u003cp\u003eA 4.5 inch intake stack is a wide opening for rain, chaff and nesting birds whenever the machine is parked. The Donaldson H000468 is a plastic inlet hood that caps a 114 mm (4.50 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 292 mm (11.50 in) across and 124 mm (4.88 in) tall overall, and it adds 86 mm (3.39 in) to the height of the stack. The mounting clamp is included. Need extra splash protection? \u003ca href=\"\/products\/h000471\"\u003eH000471\u003c\/a\u003e is the same size with a rain shroud under the hood.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 65 OEM and aftermarket brands, including Caterpillar 1P3408, John Deere AT175358, Cummins 3915068 and Volvo 1115965. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954532089935,"sku":"H000468","price":99.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h000468-plastic-inlet-hood.jpg?v=1793487114"},{"product_id":"h000471","title":"H000471 Inlet Hood, Plastic, Style C, Rain Shroud, 114 mm (4.50 in) OD Pipe","description":"\u003cp\u003eWhere a machine works in heavy rain or gets washed down, water can splash up under a standard hood as well as falling on top of it. The Donaldson H000471 is a plastic inlet hood that caps a 114 mm (4.50 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 292 mm (11.50 in) across and 124 mm (4.88 in) tall overall, and it adds 86 mm (3.40 in) to the height of the stack. The mounting clamp is included. This model also has a rain shroud on the underside of the hood for extra protection against splash from below. For the same size without the rain shroud, see \u003ca href=\"\/products\/h000468\"\u003eH000468\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 76 OEM and aftermarket brands, including Caterpillar 2990352, John Deere AT128869C, Volvo 1015560 and Case IH 290386C91. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954533761103,"sku":"H000471","price":99.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h000471-plastic-inlet-hood.jpg?v=1793486874"},{"product_id":"h000469","title":"H000469 Inlet Hood, Plastic, Style C, 127 mm (5.00 in) OD Pipe","description":"\u003cp\u003eTrucks and earthmovers with a 5 inch intake stack collect rain, snow and debris in the open pipe every time they stand outside. The Donaldson H000469 is a plastic inlet hood that caps a 127 mm (5.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 292 mm (11.50 in) across and 122 mm (4.82 in) tall overall, and it adds 84 mm (3.31 in) to the height of the stack. The mounting clamp is included.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 68 OEM and aftermarket brands, including Caterpillar 5L8091, John Deere AR60093, Volvo 58994500 and Detroit Diesel 9241664. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954533793871,"sku":"H000469","price":84.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h000469-plastic-inlet-hood.jpg?v=1793486876"},{"product_id":"h000606","title":"H000606 Inlet Hood, Plastic, Style C, Rain Shroud, 152 mm (6.00 in) OD Pipe","description":"\u003cp\u003eLarge diesels on trucks, cranes and drill rigs draw big volumes of air through a 6 inch stack, and anything that falls into it heads for the air cleaner. The Donaldson H000606 is a plastic inlet hood that caps a 152 mm (6.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 407 mm (16.00 in) across and 145 mm (5.70 in) tall overall, and it adds 125 mm (4.92 in) to the height of the stack. The mounting clamp is included. This model also has a rain shroud on the underside of the hood for extra protection against splash from below. For a low-profile bright stainless steel hood on the same pipe size, see \u003ca href=\"\/products\/h001756\"\u003eH001756\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 130 OEM and aftermarket brands, including Caterpillar 1S9937, John Deere RE11158, Cummins 3282601 and Volvo 11033571. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954533826639,"sku":"H000606","price":147.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h000606-plastic-inlet-hood.jpg?v=1793486871"},{"product_id":"h001756","title":"H001756 Inlet Hood, Stainless Steel, Style C, 152 mm (6.00 in) OD Pipe","description":"\u003cp\u003eHighway trucks with a bright 6 inch intake stack need a cap that keeps rain out and suits the polished trim around it. The Donaldson H001756 is a stainless steel inlet hood that caps a 152 mm (6.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a low-profile bright stainless steel cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 330 mm (13.00 in) across and 68 mm (2.68 in) tall overall, and it adds 68 mm (2.68 in) to the height of the stack. The mounting clamp is included. For a larger 407 mm plastic hood with a rain shroud on the same pipe size, see \u003ca href=\"\/products\/h000606\"\u003eH000606\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 7 OEM and aftermarket brands, including Kenworth GAH001756, Freightliner DNH001756, Western Star 220013415 and SISU 1402583. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954534776911,"sku":"H001756","price":402.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001756-stainless-steel-inlet-hood.jpg?v=1793486868"},{"product_id":"h001742","title":"H001742 Inlet Hood, Stainless Steel, Style C, 178 mm (7.00 in) OD Pipe","description":"\u003cp\u003eHighway trucks with a bright 7 inch intake stack need a low cap that keeps rain out and suits the polished stack it sits on. The Donaldson H001742 is a stainless steel inlet hood that caps a 178 mm (7.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a low-profile bright stainless steel cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 330 mm (13.00 in) across and 64 mm (2.52 in) tall overall, and it adds 64 mm (2.52 in) to the height of the stack. The mounting clamp is included. For a larger 406 mm plastic hood with a rain shroud on the same pipe size, see \u003ca href=\"\/products\/h000607\"\u003eH000607\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 12 OEM and aftermarket brands, including Kenworth GAH001742, Mack 2191H001742, Volvo 226013809 and Cummins 11000816. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954534809679,"sku":"H001742","price":323.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001742-stainless-steel-inlet-hood.jpg?v=1793486865"},{"product_id":"h000607","title":"H000607 Inlet Hood, Plastic, Style C, Rain Shroud, 178 mm (7.00 in) OD Pipe","description":"\u003cp\u003eA 7 inch intake stack on a prime mover, crane or mining machine is a wide opening, so the hood needs to cover it against rain from above and splash from below. The Donaldson H000607 is a plastic inlet hood that caps a 178 mm (7.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 406 mm (16.00 in) across and 145 mm (5.70 in) tall overall, and it adds 104 mm (4.09 in) to the height of the stack. The mounting clamp is included. This model also has a rain shroud on the underside of the hood for extra protection against splash from below. For a low-profile bright stainless steel hood on the same pipe size, see \u003ca href=\"\/products\/h001742\"\u003eH001742\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 136 OEM and aftermarket brands, including Caterpillar 7N8199, John Deere RE16811, Volvo 3081939 and Scania 1367563. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954534842447,"sku":"H000607","price":129.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h000607-plastic-inlet-hood.jpg?v=1793486864"},{"product_id":"h001053","title":"H001053 Inlet Hood, Plastic, Style C, Rain Shroud, 203 mm (8.00 in) OD Pipe","description":"\u003cp\u003eThe 8 inch intake stacks on large off-highway engines and gensets are open to rain, snow and debris every hour they sit outside. The Donaldson H001053 is a plastic inlet hood that caps a 203 mm (8.00 in) OD intake pipe and keeps rain, snow, birds and other large contaminants out of the air intake.\u003c\/p\u003e\n\u003cp\u003eIt is Donaldson's Style C hood: a wide plastic cap that clamps over the end of the intake stack, or straight onto the air cleaner inlet, on both on-road and off-road equipment. The hood is 406 mm (16.00 in) across and 158 mm (6.20 in) tall overall, and it adds 119 mm (4.69 in) to the height of the stack. The mounting clamp is included. This model also has a rain shroud on the underside of the hood for extra protection against splash from below.\u003c\/p\u003e\n\u003cp\u003eCross-referenced across 67 OEM and aftermarket brands, including Caterpillar 2544293, Cummins 3017003, Scania 1935066 and Volvo 226010001. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954536153167,"sku":"H001053","price":204.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001053-plastic-inlet-hood.jpg?v=1793486860"},{"product_id":"h001660","title":"H001660 Air Ram Inlet Hood, Louvered, High Profile, 152 mm (6.00 in) Pipe","description":"\u003cp\u003eA plain rain cap stops water falling straight down the stack, but on a truck at highway speed the rain is driven in sideways, and a wet air filter clogs fast. The Donaldson H001660 Air Ram is a louvered inlet hood for a 152 mm (6 in) intake stack, mounted above and behind the cab. It faces into the airstream, so moving air rams into the intake instead of being dragged in, which lowers intake restriction and helps fuel economy.\u003c\/p\u003e\n\u003cp\u003eMoist air hits the back wall of the hood, the water clings to it and drains out through a drain hole, and drier air carries on to the air cleaner. In Donaldson's testing on the 6 inch model it removed about 90% of the water at 700 cfm and 93% at 800 to 1000 cfm. A front screen keeps out large debris, and side louvers keep air flowing if the front is blocked. It is lightweight, non-corrosive and needs no servicing. It stands 376 mm high, 377 mm deep and 228 mm wide, and one mounting band is included. Fit it with the screen facing forward, and leave at least 254 mm (10 in) clearance above the cab. Facing sideways loses the restriction benefit; facing backwards raises restriction and costs engine performance.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside of your stack before ordering. Other stack sizes: \u003ca href=\"\/products\/h001654\"\u003eH001654\u003c\/a\u003e (7 in) or \u003ca href=\"\/products\/h001661\"\u003eH001661\u003c\/a\u003e (8 in). For an air cleaner mounted on the side of the cab, see the low-profile \u003ca href=\"\/products\/x004995\"\u003eX004995\u003c\/a\u003e. Cross-referenced across 24 OEM and aftermarket brands, including Volvo 25098434, Mack 43MD53M2 and Freightliner DNH001660. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954966626383,"sku":"H001660","price":393.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001660-air-ram-inlet-hood.jpg?v=1793484915"},{"product_id":"h001654","title":"H001654 Air Ram Inlet Hood, Louvered, High Profile, 178 mm (7.00 in) Pipe","description":"\u003cp\u003eA plain rain cap stops water falling straight down the stack, but on a truck at highway speed the rain is driven in sideways, and a wet air filter clogs fast. The Donaldson H001654 Air Ram is a louvered inlet hood for a 178 mm (7 in) intake stack, mounted above and behind the cab. It faces into the airstream, so moving air rams into the intake instead of being dragged in, which lowers intake restriction and helps fuel economy.\u003c\/p\u003e\n\u003cp\u003eMoist air hits the back wall of the hood, the water clings to it and drains out through a drain hole, and drier air carries on to the air cleaner. In Donaldson's testing on the 6 inch model it removed about 90% of the water at 700 cfm and 93% at 800 to 1000 cfm. A front screen keeps out large debris, and side louvers keep air flowing if the front is blocked. It is lightweight, non-corrosive and needs no servicing. It stands 394 mm high, 397 mm deep and 250 mm wide, and one mounting band is included. Fit it with the screen facing forward, and leave at least 254 mm (10 in) clearance above the cab. Facing sideways loses the restriction benefit; facing backwards raises restriction and costs engine performance.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside of your stack before ordering. Other stack sizes: \u003ca href=\"\/products\/h001660\"\u003eH001660\u003c\/a\u003e (6 in) or \u003ca href=\"\/products\/h001661\"\u003eH001661\u003c\/a\u003e (8 in). For an air cleaner mounted on the side of the cab, see the low-profile \u003ca href=\"\/products\/x004995\"\u003eX004995\u003c\/a\u003e. Cross-referenced across 22 OEM and aftermarket brands, including Volvo G15554321, Mack 49MD51P2 and Kenworth GSH001654. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954966757455,"sku":"H001654","price":457.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001654-air-ram-inlet-hood.jpg?v=1793484910"},{"product_id":"h001661","title":"H001661 Air Ram Inlet Hood, Louvered, High Profile, 203 mm (8.00 in) Pipe","description":"\u003cp\u003eA plain rain cap stops water falling straight down the stack, but on a truck at highway speed the rain is driven in sideways, and a wet air filter clogs fast. The Donaldson H001661 Air Ram is a louvered inlet hood for a 203 mm (8 in) intake stack, mounted above and behind the cab. It faces into the airstream, so moving air rams into the intake instead of being dragged in, which lowers intake restriction and helps fuel economy.\u003c\/p\u003e\n\u003cp\u003eMoist air hits the back wall of the hood, the water clings to it and drains out through a drain hole, and drier air carries on to the air cleaner. In Donaldson's testing on the 6 inch model it removed about 90% of the water at 700 cfm and 93% at 800 to 1000 cfm. A front screen keeps out large debris, and side louvers keep air flowing if the front is blocked. It is lightweight, non-corrosive and needs no servicing. It stands 410 mm high, 431 mm deep and 277 mm wide, and one mounting band is included. Fit it with the screen facing forward, and leave at least 254 mm (10 in) clearance above the cab. Facing sideways loses the restriction benefit; facing backwards raises restriction and costs engine performance.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside of your stack before ordering. Other stack sizes: \u003ca href=\"\/products\/h001660\"\u003eH001660\u003c\/a\u003e (6 in) or \u003ca href=\"\/products\/h001654\"\u003eH001654\u003c\/a\u003e (7 in). For an air cleaner mounted on the side of the cab, see the low-profile \u003ca href=\"\/products\/x004995\"\u003eX004995\u003c\/a\u003e. Cross-referenced across 10 OEM and aftermarket brands, including Volvo 226010020, Mack 219149MD53M and Kenworth GSH001661. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954966790223,"sku":"H001661","price":592.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-h001661-air-ram-inlet-hood.jpg?v=1793484907"},{"product_id":"x004995","title":"X004995 Air Ram Inlet Hood, Low Profile, 178 mm (7.00 in) Pipe, 6 in Adaptor Included","description":"\u003cp\u003eTrucks with the air cleaner mounted on the side of the cab need a forward-facing intake that doesn't stand up above the cab line. The Donaldson X004995 is the low-profile Air Ram inlet hood: it sits only 159 mm (6.26 in) tall on a 178 mm (7 in) inlet and faces into the airstream, so moving air rams into the intake instead of being dragged in. That lowers intake restriction at road speed and helps fuel economy.\u003c\/p\u003e\n\u003cp\u003eRain driven into the hood hits its back wall, clings there and drains away, so drier air reaches the air filter instead of soaking it. A front screen keeps out large debris. It is lightweight, non-corrosive and needs no servicing. An adaptor is supplied to reduce the inlet to 152 mm (6 in), so one hood suits both 6 and 7 inch inlets. It measures 335 mm wide and 306 mm deep, and one mounting band is included. Fit it with the screen facing forward: facing sideways loses the restriction benefit, and facing backwards raises restriction and costs engine performance.\u003c\/p\u003e\n\u003cp\u003eThis part replaces the earlier Donaldson H001200 low-profile Air Ram. For a hood that sits on top of an intake stack behind the cab, see the high-profile \u003ca href=\"\/products\/h001654\"\u003eH001654\u003c\/a\u003e (7 in). Cross-referenced across 10 OEM and aftermarket brands, including Volvo 1116921, Mack 219149MD31 and Freightliner DNX004995. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67954966822991,"sku":"X004995","price":460.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-x004995-low-profile-air-ram-inlet-hood.jpg?v=1793484901"},{"product_id":"p270530","title":"P270530 Rain Cap (Stack Cap), 38 mm \/ 1.5 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270530 rain cap fits the end of 38 mm (1.5 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 38 mm (1.5 in). Cross-referenced across 14 OEM and aftermarket brands, including Case IH N101742, International DCP270530 and Freightliner DNP270530. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955066110031,"sku":"P270530","price":33.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270530-rain-cap-stack-cap.jpg?v=1794951592"},{"product_id":"p270531","title":"P270531 Rain Cap (Stack Cap), 44 mm \/ 1.75 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270531 rain cap fits the end of 44 mm (1.75 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 44 mm (1.75 in). Cross-referenced across 23 OEM and aftermarket brands, including International DCP270531, Freightliner DNP270531 and Walker Manufacturing 35226. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955066142799,"sku":"P270531","price":35.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270531-rain-cap-stack-cap.jpg?v=1793484307"},{"product_id":"p270532","title":"P270532 Rain Cap (Stack Cap), 51 mm \/ 2 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270532 rain cap fits the end of 51 mm (2 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 51 mm (2 in). Cross-referenced across 43 OEM and aftermarket brands, including Case IH NP270532, New Holland 153612153 and International DCP270532. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955066175567,"sku":"P270532","price":36.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270532-rain-cap-stack-cap.jpg?v=1793484198"},{"product_id":"p270533","title":"P270533 Rain Cap (Stack Cap), 57 mm \/ 2.25 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270533 rain cap fits the end of 57 mm (2.25 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 57 mm (2.25 in). Cross-referenced across 24 OEM and aftermarket brands, including Caterpillar 1350240, Case IH NP270533 and New Holland 153612136. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955066208335,"sku":"P270533","price":38.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270533-rain-cap-stack-cap.jpg?v=1793484305"},{"product_id":"p270535","title":"P270535 Rain Cap (Stack Cap), 70 mm \/ 2.75 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270535 rain cap fits the end of 70 mm (2.75 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 70 mm (2.75 in). Cross-referenced across 26 OEM and aftermarket brands, including Caterpillar 5E7868, Case IH NX14152072 and New Holland 79018666. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955086917711,"sku":"P270535","price":41.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270535-rain-cap-stack-cap.jpg?v=1794951592"},{"product_id":"p270536","title":"P270536 Rain Cap (Stack Cap), 76 mm \/ 3 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270536 rain cap fits the end of 76 mm (3 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 76 mm (3 in). Cross-referenced across 60 OEM and aftermarket brands, including Caterpillar 5Q7626, Case IH D1NN5C208A and New Holland D1NN5C208A. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955086950479,"sku":"P270536","price":43.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270536-rain-cap-stack-cap.jpg?v=1793484190"},{"product_id":"p270538","title":"P270538 Rain Cap (Stack Cap), 89 mm \/ 3.5 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270538 rain cap fits the end of 89 mm (3.5 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 89 mm (3.5 in). Cross-referenced across 48 OEM and aftermarket brands, including Caterpillar 10008012, Case IH NX14152068 and New Holland 153612127. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955086983247,"sku":"P270538","price":44.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270538-rain-cap-stack-cap.jpg?v=1793484188"},{"product_id":"p270540","title":"P270540 Rain Cap (Stack Cap), 114 mm \/ 4.5 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270540 rain cap fits the end of 114 mm (4.5 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 114 mm (4.5 in). Cross-referenced across 34 OEM and aftermarket brands, including Caterpillar 5Q7026, Case IH 89850218 and International DCP270540. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955087016015,"sku":"P270540","price":46.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270540-rain-cap-stack-cap.jpg?v=1794951592"},{"product_id":"p270541","title":"P270541 Rain Cap (Stack Cap), 127 mm \/ 5 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270541 rain cap fits the end of 127 mm (5 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp. Want a polished finish? The \u003ca href=\"\/products\/p270838\"\u003eP270838\u003c\/a\u003e is the chrome-plated version in the same size.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 127 mm (5 in). Cross-referenced across 72 OEM and aftermarket brands, including Caterpillar 10008343, Case IH BN7146489 and New Holland 153612157. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955097993295,"sku":"P270541","price":44.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270541-rain-cap-stack-cap.jpg?v=1793484188"},{"product_id":"p270838","title":"P270838 Rain Cap (Stack Cap), 127 mm \/ 5 in OD Pipe, Chrome Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270838 rain cap fits the end of 127 mm (5 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's chrome plated, for highway trucks where the stack is on show. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp. The \u003ca href=\"\/products\/p270541\"\u003eP270541\u003c\/a\u003e is the zinc-plated version in the same size.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 127 mm (5 in). Cross-referenced across 19 OEM and aftermarket brands, including International DCP270838, Freightliner PPP270838 and Iveco 935598. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955098026063,"sku":"P270838","price":153.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270838-rain-cap-stack-cap.jpg?v=1793484025"},{"product_id":"p270543","title":"P270543 Rain Cap (Stack Cap), 152 mm \/ 6 in OD Pipe, Zinc Plated","description":"\u003cp\u003eOnce the engine stops, an open vertical stack is a funnel for rain, and water sitting in the exhaust rusts the muffler from the inside. The Donaldson P270543 rain cap fits the end of 152 mm (6 in) OD pipe. Its hinged flap is pushed open by exhaust flow while the engine runs and drops shut when it stops, keeping rain, snow, leaves and birds out of the stack. It also suits an open air intake pipe, where water would otherwise soak the air filter.\u003c\/p\u003e\n\u003cp\u003eIt's zinc-plated steel to stand up to weather and exhaust heat. The cap clamps around the outside of the pipe with a band and bolt, so there's no drilling or welding: slide it over the pipe end and tighten the clamp.\u003c\/p\u003e\n\u003cp\u003eMeasure the outside diameter of the pipe before ordering: this cap suits 152 mm (6 in). Cross-referenced across 50 OEM and aftermarket brands, including Caterpillar 1599220, Case IH L125497 and International DCP270543. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955098058831,"sku":"P270543","price":60.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p270543-rain-cap-stack-cap.jpg?v=1794951592"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/donaldson-x001988-metal-inlet-hood.png?v=1793655859","url":"https:\/\/geelongfiltersales.com.au\/collections\/hoods.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}