{"title":"Hydraulic Filter Heads \u0026 In-Tank Housings","description":"\u003cp\u003eHydraulic filter heads and in-tank housings are the fixed half of a hydraulic filter. Heads plumb into the line and take a replaceable spin-on can, while in-tank return filters mount through the reservoir lid so returning oil is cleaned as it enters the tank. They're used for new installations, adding filtration to a circuit and replacing a cracked or worn head. Pressure rating, flow, port type and whether you want a bypass decide the fit. A head run above its pressure rating can crack, and one without a bypass needs a filter element strong enough to take the full pressure drop. The selection points are listed below the products.\u003c\/p\u003e","products":[{"product_id":"p561131","title":"P561131 Hydraulic Filter Head Assembly, SP15\/25, 3\/4\" NPT Ports, 25 psi Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eSP15\/25 spin-on filter head with 3\/4\" NPT ports, a built-in 25 psi bypass and gauge\/indicator ports on both sides. Use it to add a return-line or off-line filter to a hydraulic circuit, or to replace a worn or cracked head on equipment already running SP15\/25 cans.\u003c\/p\u003e\n\u003cp\u003eThe head has 3\/4\"-14 NPT inlet and outlet ports and takes any SP15\/25 spin-on on its 1-12 UN thread. A 25 psi (1.7 bar) bypass valve lets oil go around the can once it loads up, so a blocked filter starves nothing downstream. The SP15\/25 series is rated to 150 psi (1035 kPa) working pressure and 375 psi (2590 kPa) static burst, with flow up to 114 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eGauge\/indicator ports are machined on both sides, so you can fit a visual gauge or an electrical service indicator to show when the can needs changing, from whichever side faces you. Match the micron rating to what you're protecting: these SP15\/25 cans are stocked for this head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p560693\"\u003eP560693\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p564357\"\u003eP564357\u003c\/a\u003e: 6 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p179089\"\u003eP179089\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p560694\"\u003eP560694\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p551551\"\u003eP551551\u003c\/a\u003e: 23 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565059\"\u003eP565059\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p551553\"\u003eP551553\u003c\/a\u003e: 32 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565060\"\u003eP565060\u003c\/a\u003e: 32 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550274\"\u003eP550274\u003c\/a\u003e: 150 micron wire mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565062\"\u003eP565062\u003c\/a\u003e: water absorbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 8 OEM and aftermarket brands, including Bobcat 6667317, Eaton 5003904 and Ford 9576P167848. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955436519503,"sku":"P561131","price":77.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p561131-sp15-25-hydraulic.jpg?v=1793481419"},{"product_id":"p561134","title":"P561134 Hydraulic Filter Head Assembly, SP15\/25, 3\/4\" NPT Ports, 25 psi Bypass, No Indicator Port","description":"\u003cp\u003ePlain SP15\/25 spin-on filter head with 3\/4\" NPT ports and a built-in 25 psi bypass, cross-referenced to Genie 898330 and John Deere AM106735. It suits a simple return-line or off-line filter where you change cans on hours rather than on a gauge reading.\u003c\/p\u003e\n\u003cp\u003eThe head has 3\/4\"-14 NPT inlet and outlet ports and takes any SP15\/25 spin-on on its 1-12 UN thread. A 25 psi (1.7 bar) bypass valve lets oil go around the can once it loads up, so a blocked filter starves nothing downstream. The SP15\/25 series is rated to 150 psi (1035 kPa) working pressure and 375 psi (2590 kPa) static burst, with flow up to 114 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eThis version has no gauge or indicator port. If you want to watch filter condition with a gauge, choose the \u003ca href=\"\/products\/p561131\"\u003eP561131 head\u003c\/a\u003e instead, which has ports on both sides. Match the micron rating to what you're protecting: these SP15\/25 cans are stocked for this head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p560693\"\u003eP560693\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p564357\"\u003eP564357\u003c\/a\u003e: 6 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p179089\"\u003eP179089\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p560694\"\u003eP560694\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p551551\"\u003eP551551\u003c\/a\u003e: 23 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565059\"\u003eP565059\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p551553\"\u003eP551553\u003c\/a\u003e: 32 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565060\"\u003eP565060\u003c\/a\u003e: 32 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550274\"\u003eP550274\u003c\/a\u003e: 150 micron wire mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565062\"\u003eP565062\u003c\/a\u003e: water absorbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe same head is also Donaldson's 93 mm full-flow lube filter head. Donaldson's engine liquid filtration guide rates the lube assembly to 91 L\/min (24 gpm) and 1,034 kPa (150 psi) with petroleum-based oils. These 93 mm lube filters are stocked for it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p552819\"\u003eP552819\u003c\/a\u003e, \u003ca href=\"\/products\/p555680\"\u003eP555680\u003c\/a\u003e, \u003ca href=\"\/products\/p559418\"\u003eP559418\u003c\/a\u003e: short, up to 57 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p553712\"\u003eP553712\u003c\/a\u003e, \u003ca href=\"\/products\/p555616\"\u003eP555616\u003c\/a\u003e, \u003ca href=\"\/products\/p557207\"\u003eP557207\u003c\/a\u003e, \u003ca href=\"\/products\/p558250\"\u003eP558250\u003c\/a\u003e: medium, up to 76 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p553771\"\u003eP553771\u003c\/a\u003e: long, up to 91 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced across 3 OEM and aftermarket brands, including Genie 898330, John Deere AM106735 and VMC HH561134. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67955437731919,"sku":"P561134","price":64.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p561134-sp15-25-hydraulic.jpg?v=1793481417"},{"product_id":"p175017","title":"P175017 Hydraulic Filter Head Assembly, FBK60\/80, 3\/4\" BSPP Ports, 25 psi Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eFBK60\/80 spin-on filter head with 3\/4\" BSPP ports, a built-in 25 psi bypass and gauge\/indicator ports on both sides, supplied plugged. Use it to add a return-line or off-line filter to a hydraulic circuit, or to replace a worn or cracked head on equipment already running FBK60\/80 cans.\u003c\/p\u003e\n\u003cp\u003eThe head has 3\/4\" BSPP inlet and outlet ports and takes any FBK60\/80 spin-on on its 3\/4\" BSP thread. A 25 psi (1.7 bar) bypass valve lets oil go around the can once it loads up, so a blocked filter starves nothing downstream. The FBK60\/80 series is rated to 145 psi (1005 kPa \/ 10 bar) working pressure and 217.5 psi (1500 kPa \/ 15 bar) static burst, with flow up to 80 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eThe 1\/8\" BSP gauge\/indicator ports come plugged, so you can fit a visual gauge or an electrical service indicator on whichever side faces you. FBK60\/80 cans use a 3\/4\" BSP thread, so 1-12 UN cans such as the SP15\/25 range won't fit this head. Match the micron rating to what you're protecting: these FBK60\/80 cans are stocked for this head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171602\"\u003eP171602\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171608\"\u003eP171608\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171604\"\u003eP171604\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171609\"\u003eP171609\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550268\"\u003eP550268\u003c\/a\u003e: 36 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171610\"\u003eP171610\u003c\/a\u003e: 36 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171606\"\u003eP171606\u003c\/a\u003e: 50 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171611\"\u003eP171611\u003c\/a\u003e: 50 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171607\"\u003eP171607\u003c\/a\u003e: 60 micron wire mesh\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67957850013775,"sku":"P175017","price":56.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p175017-fbk60-80-hydraulic.jpg?v=1793481424"},{"product_id":"p576557","title":"P576557 Hydraulic Filter Head Assembly, SP50\/60, 1-1\/4\" NPT Ports, 25 psi Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eSP50\/60 spin-on filter head with 1-1\/4\" NPT ports, a built-in 25 psi bypass and gauge\/indicator ports on both sides. Use it to add a high-flow return-line or off-line filter to a hydraulic circuit, or to replace a worn or cracked head on equipment already running SP50\/60 cans.\u003c\/p\u003e\n\u003cp\u003eThe head has 1-1\/4\" NPT inlet and outlet ports. Its spud takes SP50\/60 and SP80\/90 cans on the 1-1\/2-16 UN thread (Donaldson also lists a 1-1\/4 BSP filter connection). A 25 psi (1.7 bar) bypass valve lets oil go around the cans once they load up, so a blocked filter starves nothing downstream. The series is rated to 150 psi (1035 kPa) working pressure and 250 psi (1725 kPa) static burst, with flow up to 227 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eGauge\/indicator ports are machined on both sides, so you can fit a visual gauge or an electrical service indicator on whichever side faces you. For the same head with SAE O-ring ports, see \u003ca href=\"\/products\/p576564\"\u003eP576564\u003c\/a\u003e. Match the micron rating to what you're protecting: these SP50\/60 and SP80\/90 cans are stocked for this head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p167162\"\u003eP167162\u003c\/a\u003e: 6 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165762\"\u003eP165762\u003c\/a\u003e: 6 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165875\"\u003eP165875\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165876\"\u003eP165876\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165877\"\u003eP165877\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165878\"\u003eP165878\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550388\"\u003eP550388\u003c\/a\u003e: 23 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550251\"\u003eP550251\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550387\"\u003eP550387\u003c\/a\u003e: 32 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550252\"\u003eP550252\u003c\/a\u003e: 32 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165879\"\u003eP165879\u003c\/a\u003e: 50 micron synthetic, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165880\"\u003eP165880\u003c\/a\u003e: 50 micron synthetic, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550275\"\u003eP550275\u003c\/a\u003e: 150 micron wire mesh, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550276\"\u003eP550276\u003c\/a\u003e: 150 micron wire mesh, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p561183\"\u003eP561183\u003c\/a\u003e: water absorbing, long\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958061301839,"sku":"P576557","price":187.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p576557-sp50-60-hydraulic-head.jpg?v=1793481413"},{"product_id":"p576558","title":"P576558 Hydraulic Filter Head Assembly, SP50\/60, 1-1\/4\" NPT Ports, No Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eSP50\/60 spin-on filter head with 1-1\/4\" NPT ports and no bypass valve, cross-referenced to Iowa Mold Tooling 73540361. Choose it where unfiltered oil must never reach downstream components, such as ahead of a sensitive pump, motor or valve bank.\u003c\/p\u003e\n\u003cp\u003eThe head has 1-1\/4\" NPT inlet and outlet ports. Its spud takes SP50\/60 and SP80\/90 cans on the 1-1\/2-16 UN thread (Donaldson also lists a 1-1\/4 BSP filter connection). There is no bypass valve, so every drop of oil goes through the filter and nothing unfiltered reaches downstream components. That also means a loaded can restricts flow, so fit a gauge or service indicator and change cans on its reading, not just on hours. The series is rated to 150 psi (1035 kPa) working pressure and 250 psi (1725 kPa) static burst, with flow up to 227 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eGauge\/indicator ports are machined on both sides, so you can fit a visual gauge or an electrical service indicator on whichever side faces you. If you'd rather have bypass protection, the \u003ca href=\"\/products\/p576557\"\u003eP576557 head\u003c\/a\u003e is the same head with a 25 psi bypass. Match the micron rating to what you're protecting: these SP50\/60 and SP80\/90 cans are stocked for this head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p167162\"\u003eP167162\u003c\/a\u003e: 6 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165762\"\u003eP165762\u003c\/a\u003e: 6 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165875\"\u003eP165875\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165876\"\u003eP165876\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165877\"\u003eP165877\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165878\"\u003eP165878\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550388\"\u003eP550388\u003c\/a\u003e: 23 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550251\"\u003eP550251\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550387\"\u003eP550387\u003c\/a\u003e: 32 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550252\"\u003eP550252\u003c\/a\u003e: 32 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165879\"\u003eP165879\u003c\/a\u003e: 50 micron synthetic, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165880\"\u003eP165880\u003c\/a\u003e: 50 micron synthetic, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550275\"\u003eP550275\u003c\/a\u003e: 150 micron wire mesh, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550276\"\u003eP550276\u003c\/a\u003e: 150 micron wire mesh, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p561183\"\u003eP561183\u003c\/a\u003e: water absorbing, long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced to Iowa Mold Tooling 73540361.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958064676943,"sku":"P576558","price":185.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p576558-sp50-60-hydraulic-head.jpg?v=1793481410"},{"product_id":"p576564","title":"P576564 Hydraulic Filter Head Assembly, SP50\/60, SAE-20 O-Ring Ports, 25 psi Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eSP50\/60 spin-on filter head with SAE-20 O-ring boss ports (1-5\/8-12 UN), a built-in 25 psi bypass and gauge\/indicator ports on both sides, cross-referenced to MacDon 139490. O-ring boss ports seal on the O-ring rather than the thread, which suits high-vibration mobile equipment.\u003c\/p\u003e\n\u003cp\u003eThe head has SAE-20 O-ring inlet and outlet ports. Its spud takes SP50\/60 and SP80\/90 cans on the 1-1\/2-16 UN thread (Donaldson also lists a 1-1\/4 BSP filter connection). A 25 psi (1.7 bar) bypass valve lets oil go around the cans once they load up, so a blocked filter starves nothing downstream. The series is rated to 150 psi (1035 kPa) working pressure and 250 psi (1725 kPa) static burst, with flow up to 227 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eGauge\/indicator ports are machined on both sides, so you can fit a visual gauge or an electrical service indicator on whichever side faces you. For the same head with 1-1\/4\" NPT ports, see \u003ca href=\"\/products\/p576557\"\u003eP576557\u003c\/a\u003e. Match the micron rating to what you're protecting: these SP50\/60 and SP80\/90 cans are stocked for this head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p167162\"\u003eP167162\u003c\/a\u003e: 6 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165762\"\u003eP165762\u003c\/a\u003e: 6 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165875\"\u003eP165875\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165876\"\u003eP165876\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165877\"\u003eP165877\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165878\"\u003eP165878\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550388\"\u003eP550388\u003c\/a\u003e: 23 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550251\"\u003eP550251\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550387\"\u003eP550387\u003c\/a\u003e: 32 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550252\"\u003eP550252\u003c\/a\u003e: 32 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165879\"\u003eP165879\u003c\/a\u003e: 50 micron synthetic, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165880\"\u003eP165880\u003c\/a\u003e: 50 micron synthetic, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550275\"\u003eP550275\u003c\/a\u003e: 150 micron wire mesh, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550276\"\u003eP550276\u003c\/a\u003e: 150 micron wire mesh, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p561183\"\u003eP561183\u003c\/a\u003e: water absorbing, long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced to MacDon 139490.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958068084815,"sku":"P576564","price":187.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p576564-sp50-60-hydraulic-head.jpg?v=1793481405"},{"product_id":"p576565","title":"P576565 Hydraulic Filter Head Assembly, SP50\/60, SAE-20 O-Ring Ports, No Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eSP50\/60 spin-on filter head with SAE-20 O-ring boss ports (1-5\/8-12 UN) and no bypass valve, cross-referenced to Atlas Copco 1627410022 and LHA SP50SDN1. Choose it where unfiltered oil must never reach downstream components.\u003c\/p\u003e\n\u003cp\u003eThe head has SAE-20 O-ring inlet and outlet ports. Its spud takes SP50\/60 and SP80\/90 cans on the 1-1\/2-16 UN thread (Donaldson also lists a 1-1\/4 BSP filter connection). There is no bypass valve, so every drop of oil goes through the filter and nothing unfiltered reaches downstream components. That also means a loaded can restricts flow, so fit a gauge or service indicator and change cans on its reading, not just on hours. The series is rated to 150 psi (1035 kPa) working pressure and 250 psi (1725 kPa) static burst, with flow up to 227 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eGauge\/indicator ports are machined on both sides, so you can fit a visual gauge or an electrical service indicator on whichever side faces you. If you'd rather have bypass protection, the \u003ca href=\"\/products\/p576564\"\u003eP576564 head\u003c\/a\u003e is the same head with a 25 psi bypass. Match the micron rating to what you're protecting: these SP50\/60 and SP80\/90 cans are stocked for this head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p167162\"\u003eP167162\u003c\/a\u003e: 6 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165762\"\u003eP165762\u003c\/a\u003e: 6 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165875\"\u003eP165875\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165876\"\u003eP165876\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165877\"\u003eP165877\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165878\"\u003eP165878\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550388\"\u003eP550388\u003c\/a\u003e: 23 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550251\"\u003eP550251\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550387\"\u003eP550387\u003c\/a\u003e: 32 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550252\"\u003eP550252\u003c\/a\u003e: 32 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165879\"\u003eP165879\u003c\/a\u003e: 50 micron synthetic, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165880\"\u003eP165880\u003c\/a\u003e: 50 micron synthetic, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550275\"\u003eP550275\u003c\/a\u003e: 150 micron wire mesh, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550276\"\u003eP550276\u003c\/a\u003e: 150 micron wire mesh, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p561183\"\u003eP561183\u003c\/a\u003e: water absorbing, long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced to Atlas Copco 1627410022 and LHA SP50SDN1.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958069133391,"sku":"P576565","price":185.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p576565-sp50-60-hydraulic-head.jpg?v=1793481409"},{"product_id":"p563274","title":"P563274 Hydraulic Filter Head Assembly, SP80\/90 Dual, 1-1\/2\" NPT Ports, 25 psi Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eSP80\/90 dual spin-on filter head that carries two cans side by side, cross-referenced to Atlas Copco 1627410125 and LHA SP80NHN1. Splitting the flow across two cans gives up to 379 L\/min with less pressure drop and twice the dirt-holding capacity of a single can, for larger reservoirs, high-flow return lines and off-line kidney-loop filtration.\u003c\/p\u003e\n\u003cp\u003eThe head has 1-1\/2\" NPT inlet and outlet ports. Its spud takes SP50\/60 and SP80\/90 cans on the 1-1\/2-16 UN thread (Donaldson also lists a 1-1\/4 BSP filter connection). A 25 psi (1.7 bar) bypass valve lets oil go around the cans once they load up, so a blocked filter starves nothing downstream. The series is rated to 150 psi (1035 kPa) working pressure and 250 psi (1725 kPa) static burst, with flow up to 379 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eGauge\/indicator ports are machined on both sides, so you can fit a visual gauge or an electrical service indicator on whichever side faces you. Fit two cans of the same grade so the flow splits evenly between them. Match the micron rating to what you're protecting: these SP50\/60 and SP80\/90 cans are stocked for this head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p167162\"\u003eP167162\u003c\/a\u003e: 6 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165762\"\u003eP165762\u003c\/a\u003e: 6 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165875\"\u003eP165875\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165876\"\u003eP165876\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165877\"\u003eP165877\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165878\"\u003eP165878\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550388\"\u003eP550388\u003c\/a\u003e: 23 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550251\"\u003eP550251\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550387\"\u003eP550387\u003c\/a\u003e: 32 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550252\"\u003eP550252\u003c\/a\u003e: 32 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165879\"\u003eP165879\u003c\/a\u003e: 50 micron synthetic, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165880\"\u003eP165880\u003c\/a\u003e: 50 micron synthetic, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550275\"\u003eP550275\u003c\/a\u003e: 150 micron wire mesh, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550276\"\u003eP550276\u003c\/a\u003e: 150 micron wire mesh, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p561183\"\u003eP561183\u003c\/a\u003e: water absorbing, long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced to Atlas Copco 1627410125, Badger 1000204, Fusheng Airman 2116020052 and LHA SP80NHN1.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958069952591,"sku":"P563274","price":583.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p563274-sp80-90-hydraulic-head.jpg?v=1793481402"},{"product_id":"p761314","title":"P761314 Hydraulic Filter Head Assembly, FBK160\/200, 1-1\/4\" BSPP Ports, Bypass, Top Indicator Port","description":"\u003cp\u003eFBK160\/200 spin-on filter head with 1-1\/4\" BSPP ports, a built-in bypass valve and a gauge\/indicator port on top. Use it to add a high-flow return-line or off-line filter to a hydraulic circuit, or to replace a worn or cracked head on equipment already running FBK160\/200 cans.\u003c\/p\u003e\n\u003cp\u003eThe head takes any FBK160\/200 spin-on on its 1-1\/4\" BSP thread. The bypass lets oil go around the can once it loads up, so a blocked filter starves nothing downstream. Donaldson's Australian catalogue rates the bypass at 25 psi (1.72 bar), and its web shop lists 1.5 bar (22 psi). The FBK160\/200 series is rated to 145 psi (1005 kPa) working pressure and 217.5 psi (1500 kPa) static burst, with flow up to 200 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eThe 1\/8\" BSP port on top reads pressure ahead of the filter, for a visual gauge or an electrical service indicator. FBK160\/200 cans use a 1-1\/4\" BSP thread, so UN-threaded cans such as the SP50\/60 range won't fit this head. These FBK160\/200 cans are stocked for it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171613\"\u003eP171613\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171618\"\u003eP171618\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171614\"\u003eP171614\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171619\"\u003eP171619\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550148\"\u003eP550148\u003c\/a\u003e: 36 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565244\"\u003eP565244\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171616\"\u003eP171616\u003c\/a\u003e: 50 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171621\"\u003eP171621\u003c\/a\u003e: 50 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171617\"\u003eP171617\u003c\/a\u003e: 60 micron wire mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p579099\"\u003eP579099\u003c\/a\u003e: water absorbing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958087155791,"sku":"P761314","price":125.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p761314-fbk160-200-hydraulic-head.jpg?v=1793481381"},{"product_id":"p173403","title":"P173403 Hydraulic Filter Head Assembly, FBK160\/200, 1-1\/4\" BSPP Ports, No Bypass, Side Gauge Ports","description":"\u003cp\u003eFBK160\/200 spin-on filter head with 1-1\/4\" BSPP ports, no bypass valve and gauge ports on both sides. Donaldson's catalogue lists the side ports for suction-side gauges, so it suits a head mounted on the inlet side where you want to watch restriction.\u003c\/p\u003e\n\u003cp\u003eThe head takes any FBK160\/200 spin-on on its 1-1\/4\" BSP thread. There is no bypass valve, so every drop of oil goes through the filter and nothing unfiltered reaches downstream components. A loaded can restricts flow, so fit a gauge or service indicator and change cans on its reading, not just on hours. The FBK160\/200 series is rated to 145 psi (1005 kPa) working pressure and 217.5 psi (1500 kPa) static burst, with flow up to 200 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eFor the same head with a bypass and a top pressure port, see \u003ca href=\"\/products\/p761314\"\u003eP761314\u003c\/a\u003e. For no-bypass with both top and side ports, see \u003ca href=\"\/products\/p506139\"\u003eP506139\u003c\/a\u003e. These FBK160\/200 cans are stocked for it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171613\"\u003eP171613\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171618\"\u003eP171618\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171614\"\u003eP171614\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171619\"\u003eP171619\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550148\"\u003eP550148\u003c\/a\u003e: 36 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565244\"\u003eP565244\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171616\"\u003eP171616\u003c\/a\u003e: 50 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171621\"\u003eP171621\u003c\/a\u003e: 50 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171617\"\u003eP171617\u003c\/a\u003e: 60 micron wire mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p579099\"\u003eP579099\u003c\/a\u003e: water absorbing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958087352399,"sku":"P173403","price":118.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p173403-fbk160-200-hydraulic-head.jpg?v=1793482168"},{"product_id":"p766295","title":"P766295 Hydraulic Filter Head Assembly, Duramax HMK04, 3\/4\" BSPP Ports, 25 psi Bypass","description":"\u003cp\u003eDuramax® HMK04 spin-on filter head with 3\/4\" BSPP ports and a built-in 25 psi bypass. Use it to add a medium-pressure or return-line filter to a hydraulic circuit, or to replace a worn head on equipment already running HMK04 cans.\u003c\/p\u003e\n\u003cp\u003eThe head takes HMK04 Duramax® cans on its 1-3\/8-12 UN thread. A 25 psi (1.7 bar) bypass valve lets oil go around the can once it loads up, so a blocked filter starves nothing downstream. HMK04 heads are part of Donaldson's Duramax® medium-pressure range, rated to 500 psi (3450 kPa) working pressure and 1000 psi (6895 kPa) static burst, with flow up to 133 L\/min. That covers return lines and the lower-pressure side of many mobile circuits, but not the main pressure line after a high-pressure pump.\u003c\/p\u003e\n\u003cp\u003eDonaldson's catalogue lists an indicator port on the left side. Donaldson lists these HMK service indicators for the range, and we stock all four:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165965\"\u003eP165965\u003c\/a\u003e: visual sliding-bar, trips at 25 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p575334\"\u003eP575334\u003c\/a\u003e: visual pop-up, auto reset, trips at 18 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p173944\"\u003eP173944\u003c\/a\u003e: electrical, 3-wire, auto reset, trips at 20 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p174396\"\u003eP174396\u003c\/a\u003e: electrical AC\/DC, 3-wire, trips at 40 psid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese HMK04 cans are stocked for this head:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165354\"\u003eP165354\u003c\/a\u003e: 6 micron Synteq™, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165332\"\u003eP165332\u003c\/a\u003e: 6 micron Synteq™, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164375\"\u003eP164375\u003c\/a\u003e: 11 micron Synteq™, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p163542\"\u003eP163542\u003c\/a\u003e: 11 micron Synteq™, 152 mm, high collapse\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164378\"\u003eP164378\u003c\/a\u003e: 11 micron Synteq™, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p179343\"\u003eP179343\u003c\/a\u003e: 11 micron synthetic, 295 mm, 121 mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p169078\"\u003eP169078\u003c\/a\u003e: 23 micron synthetic, 114 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164381\"\u003eP164381\u003c\/a\u003e: 23 micron synthetic, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164384\"\u003eP164384\u003c\/a\u003e: 23 micron synthetic, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p163567\"\u003eP163567\u003c\/a\u003e: 23 micron synthetic, 240 mm, high collapse\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p765352\"\u003eP765352\u003c\/a\u003e: 50 micron synthetic, 119 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165335\"\u003eP165335\u003c\/a\u003e: 50 micron synthetic, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165338\"\u003eP165338\u003c\/a\u003e: 50 micron synthetic, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p573301\"\u003eP573301\u003c\/a\u003e: 150 micron wire mesh, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p560584\"\u003eP560584\u003c\/a\u003e: water absorbing, 240 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958090039375,"sku":"P766295","price":227.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p766295-hmk04-hydraulic-head.jpg?v=1793482121"},{"product_id":"p166088","title":"P166088 Hydraulic Filter Head Assembly, Duramax HMK04, SAE-16 O-Ring Ports, 25 psi Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eDuramax® HMK04 spin-on filter head with SAE-16 O-ring boss ports, a built-in 25 psi bypass and indicator ports on both sides. O-ring boss ports seal on the O-ring rather than the thread, which suits high-vibration mobile equipment.\u003c\/p\u003e\n\u003cp\u003eThe head takes HMK04 Duramax® cans on its 1-3\/8-12 UN thread. A 25 psi (1.7 bar) bypass valve lets oil go around the can once it loads up, so a blocked filter starves nothing downstream. HMK04 heads are part of Donaldson's Duramax® medium-pressure range, rated to 500 psi (3450 kPa) working pressure and 1000 psi (6895 kPa) static burst, with flow up to 133 L\/min. That covers return lines and the lower-pressure side of many mobile circuits, but not the main pressure line after a high-pressure pump.\u003c\/p\u003e\n\u003cp\u003eWith ports on both sides you can fit an indicator on whichever side faces you. Donaldson lists these HMK service indicators for the range, and we stock all four:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165965\"\u003eP165965\u003c\/a\u003e: visual sliding-bar, trips at 25 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p575334\"\u003eP575334\u003c\/a\u003e: visual pop-up, auto reset, trips at 18 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p173944\"\u003eP173944\u003c\/a\u003e: electrical, 3-wire, auto reset, trips at 20 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p174396\"\u003eP174396\u003c\/a\u003e: electrical AC\/DC, 3-wire, trips at 40 psid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese HMK04 cans are stocked for this head:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165354\"\u003eP165354\u003c\/a\u003e: 6 micron Synteq™, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165332\"\u003eP165332\u003c\/a\u003e: 6 micron Synteq™, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164375\"\u003eP164375\u003c\/a\u003e: 11 micron Synteq™, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p163542\"\u003eP163542\u003c\/a\u003e: 11 micron Synteq™, 152 mm, high collapse\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164378\"\u003eP164378\u003c\/a\u003e: 11 micron Synteq™, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p179343\"\u003eP179343\u003c\/a\u003e: 11 micron synthetic, 295 mm, 121 mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p169078\"\u003eP169078\u003c\/a\u003e: 23 micron synthetic, 114 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164381\"\u003eP164381\u003c\/a\u003e: 23 micron synthetic, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164384\"\u003eP164384\u003c\/a\u003e: 23 micron synthetic, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p163567\"\u003eP163567\u003c\/a\u003e: 23 micron synthetic, 240 mm, high collapse\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p765352\"\u003eP765352\u003c\/a\u003e: 50 micron synthetic, 119 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165335\"\u003eP165335\u003c\/a\u003e: 50 micron synthetic, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165338\"\u003eP165338\u003c\/a\u003e: 50 micron synthetic, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p573301\"\u003eP573301\u003c\/a\u003e: 150 micron wire mesh, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p560584\"\u003eP560584\u003c\/a\u003e: water absorbing, 240 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced to Volvo VOE11036312, Claas 578464, Atlas Copco 371974, Cedarapids 0420030075 and CMI 002008551000. The full list is in the cross reference tab.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958090072143,"sku":"P166088","price":227.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p166088-hmk04-hydraulic-head.jpg?v=1793481397"},{"product_id":"p506139","title":"P506139 Hydraulic Filter Head Assembly, FBK160\/200, 1-1\/4\" BSPP Ports, No Bypass, Top \u0026 Side Gauge Ports","description":"\u003cp\u003eFBK160\/200 spin-on filter head with 1-1\/4\" BSPP ports, no bypass valve, and gauge ports on top (pressure side) and on both sides (suction side). It gives you the most gauge options in the FBK160\/200 range.\u003c\/p\u003e\n\u003cp\u003eThe head takes any FBK160\/200 spin-on on its 1-1\/4\" BSP thread. There is no bypass valve, so every drop of oil goes through the filter and nothing unfiltered reaches downstream components. A loaded can restricts flow, so fit a gauge or service indicator and change cans on its reading, not just on hours. The FBK160\/200 series is rated to 145 psi (1005 kPa) working pressure and 217.5 psi (1500 kPa) static burst, with flow up to 200 L\/min, so it belongs on the return or low-pressure side, not after the pump on the pressure line.\u003c\/p\u003e\n\u003cp\u003eFor a bypass head, see \u003ca href=\"\/products\/p761314\"\u003eP761314\u003c\/a\u003e. These FBK160\/200 cans are stocked for it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171613\"\u003eP171613\u003c\/a\u003e: 11 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171618\"\u003eP171618\u003c\/a\u003e: 11 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171614\"\u003eP171614\u003c\/a\u003e: 23 micron Synteq™, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171619\"\u003eP171619\u003c\/a\u003e: 23 micron Synteq™, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p550148\"\u003eP550148\u003c\/a\u003e: 36 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p565244\"\u003eP565244\u003c\/a\u003e: 23 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171616\"\u003eP171616\u003c\/a\u003e: 50 micron cellulose, short\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171621\"\u003eP171621\u003c\/a\u003e: 50 micron cellulose, long\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171617\"\u003eP171617\u003c\/a\u003e: 60 micron wire mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p579099\"\u003eP579099\u003c\/a\u003e: water absorbing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958092070991,"sku":"P506139","price":136.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p506139-fbk160-200-hydraulic-head.jpg?v=1793482109"},{"product_id":"p166664","title":"P166664 Hydraulic Filter Head Assembly, Duramax HMK04, SAE-16 O-Ring Ports, No Bypass, Indicator Ports Both Sides","description":"\u003cp\u003eDuramax® HMK04 spin-on filter head with SAE-16 O-ring boss ports, no bypass valve and indicator ports on both sides. Choose it where unfiltered oil must never reach downstream components, such as ahead of a servo valve or a sensitive pump.\u003c\/p\u003e\n\u003cp\u003eThe head takes HMK04 Duramax® cans on its 1-3\/8-12 UN thread. There is no bypass valve, so every drop of oil goes through the filter. A loaded can restricts flow, so fit a service indicator and change cans on its reading. HMK04 heads are part of Donaldson's Duramax® medium-pressure range, rated to 500 psi (3450 kPa) working pressure and 1000 psi (6895 kPa) static burst, with flow up to 133 L\/min. That covers return lines and the lower-pressure side of many mobile circuits, but not the main pressure line after a high-pressure pump.\u003c\/p\u003e\n\u003cp\u003eIf you'd rather have bypass protection, \u003ca href=\"\/products\/p166088\"\u003eP166088\u003c\/a\u003e is the same head with a 25 psi bypass. Donaldson lists these HMK service indicators for the range, and we stock all four:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165965\"\u003eP165965\u003c\/a\u003e: visual sliding-bar, trips at 25 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p575334\"\u003eP575334\u003c\/a\u003e: visual pop-up, auto reset, trips at 18 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p173944\"\u003eP173944\u003c\/a\u003e: electrical, 3-wire, auto reset, trips at 20 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p174396\"\u003eP174396\u003c\/a\u003e: electrical AC\/DC, 3-wire, trips at 40 psid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese HMK04 cans are stocked for this head:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165354\"\u003eP165354\u003c\/a\u003e: 6 micron Synteq™, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165332\"\u003eP165332\u003c\/a\u003e: 6 micron Synteq™, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164375\"\u003eP164375\u003c\/a\u003e: 11 micron Synteq™, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p163542\"\u003eP163542\u003c\/a\u003e: 11 micron Synteq™, 152 mm, high collapse\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164378\"\u003eP164378\u003c\/a\u003e: 11 micron Synteq™, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p179343\"\u003eP179343\u003c\/a\u003e: 11 micron synthetic, 295 mm, 121 mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p169078\"\u003eP169078\u003c\/a\u003e: 23 micron synthetic, 114 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164381\"\u003eP164381\u003c\/a\u003e: 23 micron synthetic, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p164384\"\u003eP164384\u003c\/a\u003e: 23 micron synthetic, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p163567\"\u003eP163567\u003c\/a\u003e: 23 micron synthetic, 240 mm, high collapse\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p765352\"\u003eP765352\u003c\/a\u003e: 50 micron synthetic, 119 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165335\"\u003eP165335\u003c\/a\u003e: 50 micron synthetic, 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165338\"\u003eP165338\u003c\/a\u003e: 50 micron synthetic, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p573301\"\u003eP573301\u003c\/a\u003e: 150 micron wire mesh, 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p560584\"\u003eP560584\u003c\/a\u003e: water absorbing, 240 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced to CMI 285492, Fmc 2263897, Manitowoc 4270510 and Marine Travelift, Inc. 605298.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958094725199,"sku":"P166664","price":204.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p166664-hmk04-hydraulic-head.jpg?v=1793481370"},{"product_id":"p173448","title":"P173448 Hydraulic Filter Head Assembly, Duramax HMK05, 1-1\/4\" BSPP Ports, 25 psi Bypass","description":"\u003cp\u003eDuramax® HMK05 spin-on filter head with 1-1\/4\" BSPP ports and a built-in 25 psi bypass, for higher-flow medium-pressure and return-line filtration up to 189 L\/min.\u003c\/p\u003e\n\u003cp\u003eThe head takes HMK05 Duramax® cans on its 1-3\/4-12 UN thread. A 25 psi (1.7 bar) bypass valve lets oil go around the can once it loads up, so a blocked filter starves nothing downstream. HMK05 heads are rated to 350 psi (2415 kPa) working pressure and 800 psi (5520 kPa) static burst, so they suit return lines and the lower-pressure side of mobile and industrial circuits.\u003c\/p\u003e\n\u003cp\u003eDonaldson's catalogue lists an indicator port on the left side. Donaldson lists these HMK service indicators for the range, and we stock all four:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165965\"\u003eP165965\u003c\/a\u003e: visual sliding-bar, trips at 25 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p575334\"\u003eP575334\u003c\/a\u003e: visual pop-up, auto reset, trips at 18 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p173944\"\u003eP173944\u003c\/a\u003e: electrical, 3-wire, auto reset, trips at 20 psid\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p174396\"\u003eP174396\u003c\/a\u003e: electrical AC\/DC, 3-wire, trips at 40 psid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese HMK05 cans are stocked for this head:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p564468\"\u003eP564468\u003c\/a\u003e: 4 micron synthetic, 362 mm, fluorocarbon seals\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171274\"\u003eP171274\u003c\/a\u003e: 6 micron synthetic, 295 mm, fluorocarbon seals\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165675\"\u003eP165675\u003c\/a\u003e: 6 micron synthetic, 295 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p179763\"\u003eP179763\u003c\/a\u003e: 6 micron synthetic, 362 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171275\"\u003eP171275\u003c\/a\u003e: 11 micron synthetic, 295 mm, fluorocarbon seals\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165659\"\u003eP165659\u003c\/a\u003e: 11 micron Synteq™, 295 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p170949\"\u003eP170949\u003c\/a\u003e: 11 micron synthetic, 362 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165569\"\u003eP165569\u003c\/a\u003e: 23 micron synthetic, 295 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p173789\"\u003eP173789\u003c\/a\u003e: 25 micron synthetic, 362 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p165672\"\u003eP165672\u003c\/a\u003e: 50 micron synthetic, 295 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p173943\"\u003eP173943\u003c\/a\u003e: 150 micron wire mesh, 295 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p179075\"\u003eP179075\u003c\/a\u003e: water absorbing, 295 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958094889039,"sku":"P173448","price":331.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p173448-hydraulic-filter-head-assembly.webp?v=1794951592"},{"product_id":"k040811","title":"K040811 Hydraulic In-Tank Filter Assembly, FIK, SAE-12 O-Ring Port, 53 L\/min","description":"\u003cp\u003eSmall FIK in-tank return filter with an SAE-12 O-ring inlet port, for return flows up to 53 L\/min. It is supplied with a \u003ca href=\"\/products\/p171527\"\u003eP171527\u003c\/a\u003e 36 micron cellulose cartridge.\u003c\/p\u003e\n\u003cp\u003eFIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs an 80.6 mm mounting hole and sits 93 mm below the tank surface. A 22 psi (1.5 bar) bypass protects the element, and the series is rated to 145 psi (1000 kPa) working pressure. This assembly has no indicator port.\u003c\/p\u003e\n\u003cp\u003eTakes these FIK cartridges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171525\"\u003eP171525\u003c\/a\u003e: 11 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171526\"\u003eP171526\u003c\/a\u003e: 23 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171527\"\u003eP171527\u003c\/a\u003e: 36 micron cellulose (supplied)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171523\"\u003eP171523\u003c\/a\u003e: 60 micron wire mesh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCross-referenced to American Augers 8FL20029 and New Flyer Industries Ltd 301305.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958122676303,"sku":"K040811","price":198.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-k040811-fik-in-tank-hydraulic-filter.jpg?v=1793485425"},{"product_id":"k040812","title":"K040812 Hydraulic In-Tank Filter Assembly, FIK, SAE-16 O-Ring Port, 86 L\/min","description":"\u003cp\u003eFIK in-tank return filter with an SAE-16 O-ring inlet port, for return flows up to 86 L\/min. It is supplied with a \u003ca href=\"\/products\/p171533\"\u003eP171533\u003c\/a\u003e 36 micron cellulose cartridge.\u003c\/p\u003e\n\u003cp\u003eFIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs an 80.6 mm mounting hole and sits 143 mm below the tank surface. A 22 psi (1.5 bar) bypass protects the element, and the series is rated to 145 psi (1000 kPa) working pressure. It has an indicator port, so you can see when the element needs changing.\u003c\/p\u003e\n\u003cp\u003eTakes these FIK cartridges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171531\"\u003eP171531\u003c\/a\u003e: 11 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171532\"\u003eP171532\u003c\/a\u003e: 23 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171533\"\u003eP171533\u003c\/a\u003e: 36 micron cellulose (supplied)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171535\"\u003eP171535\u003c\/a\u003e: 60 micron wire mesh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed a BSP inlet? \u003ca href=\"\/products\/k040503\"\u003eK040503\u003c\/a\u003e takes the same cartridges with a 1\" BSP port.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958123135055,"sku":"K040812","price":191.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-k040812-fik-in-tank-hydraulic-filter.jpg?v=1793485431"},{"product_id":"k040503","title":"K040503 Hydraulic In-Tank Filter Assembly, FIK, 1\" BSP Port, 100 L\/min","description":"\u003cp\u003eFIK in-tank return filter with a 1\" BSP inlet port, for return flows up to 100 L\/min. It is supplied with a \u003ca href=\"\/products\/p171533\"\u003eP171533\u003c\/a\u003e 36 micron cellulose cartridge.\u003c\/p\u003e\n\u003cp\u003eFIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs a 90 mm mounting hole and sits 149 mm below the tank surface. A 22 psi (1.5 bar) bypass protects the element, and the series is rated to 145 psi (1000 kPa) working pressure.\u003c\/p\u003e\n\u003cp\u003eTakes these FIK cartridges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171531\"\u003eP171531\u003c\/a\u003e: 11 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171532\"\u003eP171532\u003c\/a\u003e: 23 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171533\"\u003eP171533\u003c\/a\u003e: 36 micron cellulose (supplied)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171535\"\u003eP171535\u003c\/a\u003e: 60 micron wire mesh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed an SAE O-ring inlet? \u003ca href=\"\/products\/k040812\"\u003eK040812\u003c\/a\u003e takes the same cartridges with an SAE-16 port.\u003c\/p\u003e\n\u003cp\u003eCross-referenced to Sauer Danfoss SQC00153 and Modina RFM25CD1B5.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":67958143189071,"sku":"K040503","price":111.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-k040503-hydraulic-in-tank-filter-assembly-side-view.jpg?v=1793486525"},{"product_id":"p766619","title":"P766619 Hydraulic In-Tank Filter Housing, FIK-FIS40, 1\/2\" BSP Port, 40 L\/min, Housing Only","description":"\u003cp\u003eFIK-FIS40 in-tank return filter housing with a 1\/2\" BSP inlet port, for return flows up to 40 L\/min. Donaldson supplies the standard housing without a cartridge or breather, so you choose the element grade and breather to suit your system.\u003c\/p\u003e\n\u003cp\u003eFIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs a 59 mm tank opening, reaches 180 mm below the tank surface and needs 164 mm of clearance above to lift the element out. Keep the outlet well below the oil level so the returning oil doesn't foam.\u003c\/p\u003e\n\u003cp\u003eThe series is rated to 145 psi (1000 kPa) working pressure. The 1.5 bar (22 psi) bypass valve and its spring come with every replacement element, so each element change renews the bypass. Two 1\/8\" BSP indicator ports are machined into the head and supplied plugged. The head is open to the tank, so fit a breather on top to keep dust and moisture out.\u003c\/p\u003e\n\u003cp\u003eRecommended maximum flow depends on the element: 40 L\/min with wire mesh, 30 L\/min with cellulose and 25 L\/min with Synteq™ synthetic media.\u003c\/p\u003e\n\u003cp\u003eIt takes FIK-FIS40 cartridges (43 mm OD x 162 mm long, 22 mm bore), available in wire mesh, cellulose and Synteq™ synthetic grades.\u003c\/p\u003e\n\u003cp\u003eNeed more flow? The \u003ca href=\"\/products\/p766597\"\u003eP766597\u003c\/a\u003e FIS60 (3\/4\" BSP, 60 L\/min) and \u003ca href=\"\/products\/p766598\"\u003eP766598\u003c\/a\u003e FIS100 (1\" BSP, 100 L\/min) housings mount in a 90 mm tank opening.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68005888950351,"sku":"P766619","price":193.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p766619-fik-in-tank-hydraulic-filter-housing.jpg?v=1793940179"},{"product_id":"p766597","title":"P766597 Hydraulic In-Tank Filter Housing, FIK-FIS60, 3\/4\" BSP Port, 60 L\/min, Housing Only","description":"\u003cp\u003eFIK-FIS60 in-tank return filter housing with a 3\/4\" BSP inlet port, for return flows up to 60 L\/min. Donaldson supplies the standard housing without a cartridge or breather, so you choose the element grade and breather to suit your system.\u003c\/p\u003e\n\u003cp\u003eFIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs a 90 mm tank opening, reaches 91 mm below the tank surface and needs 84 mm of clearance above to lift the element out. Keep the outlet well below the oil level so the returning oil doesn't foam.\u003c\/p\u003e\n\u003cp\u003eThe series is rated to 145 psi (1000 kPa) working pressure. The 1.5 bar (22 psi) bypass valve and its spring come with every replacement element, so each element change renews the bypass. Two 1\/8\" BSP indicator ports are machined into the head and supplied plugged. The head is open to the tank, so fit a breather on top to keep dust and moisture out.\u003c\/p\u003e\n\u003cp\u003eRecommended maximum flow depends on the element: 60 L\/min with wire mesh, 40 L\/min with cellulose and 35 L\/min with Synteq™ synthetic media.\u003c\/p\u003e\n\u003cp\u003eTakes these FIK-FIS60 cartridges (70 mm OD x 82 mm long, 29 mm bore):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171525\"\u003eP171525\u003c\/a\u003e: 11 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171526\"\u003eP171526\u003c\/a\u003e: 23 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171527\"\u003eP171527\u003c\/a\u003e: 36 micron cellulose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWant it ready to fit? \u003ca href=\"\/products\/k040811\"\u003eK040811\u003c\/a\u003e is a complete FIK in-tank filter with an SAE-12 O-ring port that takes the same cartridges and comes with a P171527 element.\u003c\/p\u003e\n\u003cp\u003eNeed more flow from the same 90 mm opening? \u003ca href=\"\/products\/p766598\"\u003eP766598\u003c\/a\u003e is the FIS100 housing with a 1\" BSP port, up to 100 L\/min.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68005892653135,"sku":"P766597","price":164.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p766597-fik-in-tank-hydraulic-filter-housing.jpg?v=1793940132"},{"product_id":"p766598","title":"P766598 Hydraulic In-Tank Filter Housing, FIK-FIS100, 1\" BSP Port, 100 L\/min, Housing Only","description":"\u003cp\u003eFIK-FIS100 in-tank return filter housing with a 1\" BSP inlet port, for return flows up to 100 L\/min. Donaldson supplies the standard housing without a cartridge or breather, so you choose the element grade and breather to suit your system.\u003c\/p\u003e\n\u003cp\u003eFIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs a 90 mm tank opening, reaches 141 mm below the tank surface and needs 130 mm of clearance above to lift the element out. Keep the outlet well below the oil level so the returning oil doesn't foam.\u003c\/p\u003e\n\u003cp\u003eThe series is rated to 145 psi (1000 kPa) working pressure. The 1.5 bar (22 psi) bypass valve and its spring come with every replacement element, so each element change renews the bypass. Two 1\/8\" BSP indicator ports are machined into the head and supplied plugged. The head is open to the tank, so fit a breather on top to keep dust and moisture out.\u003c\/p\u003e\n\u003cp\u003eRecommended maximum flow depends on the element: 100 L\/min with wire mesh, 65 L\/min with cellulose and 60 L\/min with Synteq™ synthetic media.\u003c\/p\u003e\n\u003cp\u003eTakes these FIK-FIS100 cartridges (70 mm OD x 128 mm long, 29 mm bore):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171531\"\u003eP171531\u003c\/a\u003e: 11 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171532\"\u003eP171532\u003c\/a\u003e: 23 micron Synteq™\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171533\"\u003eP171533\u003c\/a\u003e: 36 micron cellulose\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/p171535\"\u003eP171535\u003c\/a\u003e: 60 micron wire mesh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWant it ready to fit? \u003ca href=\"\/products\/k040503\"\u003eK040503\u003c\/a\u003e (1\" BSP port) and \u003ca href=\"\/products\/k040812\"\u003eK040812\u003c\/a\u003e (SAE-16 O-ring port) are complete FIK in-tank filters that take the same cartridges and come with a P171533 element.\u003c\/p\u003e\n\u003cp\u003eNeed more flow from the same 90 mm opening? \u003ca href=\"\/products\/p766599\"\u003eP766599\u003c\/a\u003e is the FIS150 housing with a 1-1\/4\" BSP port, up to 150 L\/min.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68005892718671,"sku":"P766598","price":165.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p766598-fik-in-tank-hydraulic-filter-housing.jpg?v=1793940127"},{"product_id":"p766599","title":"P766599 Hydraulic In-Tank Filter Housing, FIK-FIS150, 1-1\/4\" BSP Port, 150 L\/min, Housing Only","description":"\u003cp\u003eFIK-FIS150 in-tank return filter housing with a 1-1\/4\" BSP inlet port, for return flows up to 150 L\/min. Donaldson supplies the standard housing without a cartridge or breather, so you choose the element grade and breather to suit your system.\u003c\/p\u003e\n\u003cp\u003eFIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs a 90 mm tank opening, reaches 218 mm below the tank surface and needs 212 mm of clearance above to lift the element out. Keep the outlet well below the oil level so the returning oil doesn't foam.\u003c\/p\u003e\n\u003cp\u003eThe series is rated to 145 psi (1000 kPa) working pressure. The 1.5 bar (22 psi) bypass valve and its spring come with every replacement element, so each element change renews the bypass. Two 1\/8\" BSP indicator ports are machined into the head and supplied plugged. The head is open to the tank, so fit a breather on top to keep dust and moisture out.\u003c\/p\u003e\n\u003cp\u003eRecommended maximum flow depends on the element: 150 L\/min with wire mesh, 120 L\/min with cellulose and 110 L\/min with Synteq™ synthetic media.\u003c\/p\u003e\n\u003cp\u003eIt takes FIK-FIS150 cartridges (70 mm OD x 210 mm long, 42 mm bore), available in wire mesh, cellulose and Synteq™ synthetic grades.\u003c\/p\u003e\n\u003cp\u003eShorter tank? \u003ca href=\"\/products\/p766598\"\u003eP766598\u003c\/a\u003e is the FIS100 housing with a 1\" BSP port, 141 mm below the surface and up to 100 L\/min.\u003c\/p\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":68005892751439,"sku":"P766599","price":188.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/donaldson-p766599-fik-in-tank-hydraulic-filter-housing.jpg?v=1793940123"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/donaldson-k040811-fik-in-tank-hydraulic-filter.png?v=1793603201","url":"https:\/\/geelongfiltersales.com.au\/collections\/hydraulic-filter-heads.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}