{"title":"Hydraulic Oil","description":"\u003cp\u003eHydraulic oil for excavators, loaders, tippers, cranes, farm machinery, presses and fixed industrial systems. A hydraulic oil transmits power, lubricates pumps, motors and valves, carries heat away and protects against rust, so it has to hold its viscosity, resist foaming and separate cleanly from water.\u003c\/p\u003e\u003cp\u003eThe two decisions are the ISO viscosity grade the OEM lists for the machine and climate, and the oil type: standard anti-wear for most machines, or high viscosity index (HVI) for machines that start cold and work hot. Too thin and pumps wear while the system runs hot. Too thick and controls go sluggish on cold mornings and the pump can cavitate. Keep it clean too, because contamination is a leading cause of pump and valve wear. The guide below explains the grades.\u003c\/p\u003e","products":[{"product_id":"2150-20","title":"2150.20 Ultramax HVI 32 Hydraulic Oil 20L","description":"\u003cp\u003eValvoline Ultramax HVI 32 is a high viscosity index (HVI) hydraulic oil, an ISO 32 grade built to hold a stable film across a wide temperature range. That makes it ideal for mobile and outdoor equipment that starts cold and works hot, from machine tools and rotary air compressors to torque converters and enclosed gearboxes. It carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 20L pack suits workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA high-VI oil for mobile and outdoor hydraulics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eViscosity index measures how much an oil thins as it heats, and a high-VI oil changes viscosity less, staying close to its intended thickness whether cold on start-up or hot after hours of work. This ISO 32 high-VI hydraulic oil holds a stable film across that swing, which is exactly what mobile and outdoor equipment needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy that matters outdoors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMobile and outdoor equipment starts cold and works hot, and an ordinary hydraulic oil can be sluggish at start-up and too thin once warm. The high viscosity index keeps Ultramax HVI 32 in its working range across that swing, so pumps and valves get consistent flow and protection. The lighter ISO 32 grade suits systems that benefit from faster response and cold-weather flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAnti-wear protection and wide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt protects pumps and valves against wear and carries broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, meeting ISO 11158 HV and DIN 51524 Part 3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits mobile plant, machine tools, compressors and outdoor hydraulics that see a wide temperature range. Confirm the ISO grade your system specifies before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic systems fail more often from dirty oil than worn-out oil, so keep the fluid clean: store it sealed, filter on filling, and maintain the system's filters, since fine contamination is what scores pumps and valves. Match the ISO grade to the equipment maker's recommendation, and choose an HVI grade like this where the machine works across a wide temperature range and benefits from stable viscosity from cold start to hot running. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. Clean oil of the right grade is what lets the anti-wear additives protect the system as intended.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478837289039,"sku":"2150.20","price":179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2150-20-ultramax-hvi-32-hydraulic-oil-20l.jpg?v=1793486720"},{"product_id":"2151-20","title":"2151.20 Ultramax HVI 46 Hydraulic Oil 20L","description":"\u003cp\u003eValvoline Ultramax HVI 46 is a high viscosity index (HVI) hydraulic oil, an ISO 46 grade that maintains a stable film across a wide temperature range for mobile and outdoor equipment. As the versatile general-purpose HVI grade, it suits everything from machine tools and compressors to torque converters and gearboxes, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 20L pack suits workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe all-round high-VI hydraulic grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMobile and outdoor equipment starts cold and works hot, and an oil that thins less as it heats keeps that swing under control. This ISO 46 high-VI hydraulic oil is the versatile, general-purpose grade for most hydraulics, with the high viscosity index adding all-season consistency from a cold start through to sustained hot running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConsistent flow, cold to hot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause a high-VI oil thins less as it heats, Ultramax HVI 46 stays in its working range from a cold start through to sustained hot running, so pumps and valves get steady flow and protection whether the machine is starting on a cold morning or working hard in the heat of the day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAnti-wear protection and wide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt protects pumps and valves against wear and carries broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, meeting ISO 11158 HV and DIN 51524 Part 3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits mobile plant, machine tools, compressors and outdoor hydraulics needing all-season performance from one general-purpose grade. Confirm the ISO grade your system specifies before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause dirty oil, not tired oil, is the usual cause of hydraulic wear, keep the fluid clean by storing it sealed, filtering on fill, and maintaining the system filters so fine grit does not score pumps and valves. As the versatile general-purpose HVI grade, ISO 46 suits most mobile and outdoor systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. The high viscosity index holds the oil in its working range from cold start to hot running, so clean oil of the right grade lets the anti-wear additives protect the system as designed.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478845448271,"sku":"2151.20","price":179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2151-20-ultramax-hvi-46-hydraulic-oil-20l.webp?v=1785300722"},{"product_id":"2152-20","title":"2152.20 Ultramax HVI 68 Hydraulic Oil 20L","description":"\u003cp\u003eValvoline Ultramax HVI 68 is a high viscosity index (HVI) hydraulic oil, an ISO 68 grade that keeps a stable film across a wide temperature range and suits higher-load mobile and outdoor systems. Its heavier body holds up in hot, hard-working equipment from compressors to torque converters and gearboxes, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 20L pack suits workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier high-VI oil for hot, higher-load systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHot, hard-working hydraulic systems need a heavier body that holds up where a lighter grade would thin too far. This ISO 68 high-VI oil provides that thicker film for higher-load mobile and outdoor systems, while the high viscosity index keeps it close to its intended thickness across a wide temperature range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilm strength across temperatures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe high viscosity index keeps the oil close to its intended thickness as it heats, and the ISO 68 grade provides a thicker film for higher-pressure, higher-temperature systems. Together they give pumps and valves a robust, consistent film whether the machine is cold or working hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAnti-wear protection and wide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt protects pumps and valves against wear and carries broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, meeting ISO 11158 HV and DIN 51524 Part 3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits hard-working mobile plant and outdoor hydraulics running hot under load and specifying an ISO 68. Confirm the ISO grade your system specifies before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep hydraulic oil clean, since fine contamination scores pumps and valves and is the usual cause of failure: store it sealed, filter on filling, and maintain the system filters. The heavier ISO 68 HVI grade suits hotter, higher-load systems, but the right choice is always the equipment maker's specified grade, so confirm before selecting. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. The high viscosity index keeps the oil in its working range across temperatures, so pumps and valves get a consistent film whether the machine is cold or working hard, and clean oil of the right grade is what makes that protection last.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478850134095,"sku":"2152.20","price":179.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2152-20-ultramax-hvi-68-hydraulic-oil-20l.webp?v=1785300724"},{"product_id":"2172-05","title":"2172.05 Ultramax 32 Hydraulic Oil 5L","description":"\u003cp\u003eValvoline Ultramax 32 is an ISO 32 anti-wear hydraulic oil, a zinc-based, non-detergent formulation that guards pumps and valves against wear, corrosion and high pressure. The lighter ISO 32 grade suits precision and cold-running systems where fast oil flow matters, and it carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 5L pack suits top-ups and small systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn anti-wear hydraulic oil for precision systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic pumps and valves run at high pressure with fine clearances, and an anti-wear oil forms a protective film on those surfaces to prevent the wear that leads to lost pressure and internal leakage. This zinc-based, non-detergent ISO 32 grade delivers that protection in precision and cooler-running systems where fast oil response matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic pumps and valves run at high pressure with fine clearances, and the zinc anti-wear additives form a protective film on those surfaces to prevent the metal-to-metal wear that leads to lost pressure and internal leakage. The non-detergent formulation is designed to let water and contaminants separate out rather than holding them in suspension, which suits general hydraulic service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, so it matches the requirement for most industrial and mobile systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits machine tools and precision hydraulics specifying an ISO 32 anti-wear oil. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic systems wear from dirty oil far more than from worn-out oil, so keep the fluid clean: store it sealed, filter on filling, and keep the system filters serviced, since fine grit is what damages pumps and valves. The lighter ISO 32 grade suits precision and cooler-running systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. As a non-detergent oil it lets water and contaminants settle out rather than holding them in suspension, so keeping the reservoir clean and drained of water helps the anti-wear additives protect the system as intended.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478856556623,"sku":"2172.05","price":48.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2172-05-ultramax-32-hydraulic-oil-5l.webp?v=1785300726"},{"product_id":"2172-20","title":"2172.20 Ultramax 32 Hydraulic Oil 20L","description":"\u003cp\u003eValvoline Ultramax 32 is an ISO 32 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves against wear, corrosion and high pressure. Its lighter grade suits precision and cooler-running systems, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 20L pack is the practical choice for workshops and single-machine servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn anti-wear hydraulic oil for precision systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic pumps and valves run at high pressure with fine clearances, and an anti-wear oil forms a protective film on those surfaces to prevent the wear that leads to lost pressure and internal leakage. This zinc-based, non-detergent ISO 32 grade delivers that protection in precision and cooler-running systems where fast oil response matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic pumps and valves run at high pressure with fine clearances, and the zinc anti-wear additives form a protective film on those surfaces to prevent the metal-to-metal wear that leads to lost pressure and internal leakage. The non-detergent formulation is designed to let water and contaminants separate out rather than holding them in suspension, which suits general hydraulic service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, so it matches the requirement for most industrial and mobile systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits machine tools and precision hydraulics specifying an ISO 32 anti-wear oil. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic systems wear from dirty oil far more than from worn-out oil, so keep the fluid clean: store it sealed, filter on filling, and keep the system filters serviced, since fine grit is what damages pumps and valves. The lighter ISO 32 grade suits precision and cooler-running systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. As a non-detergent oil it lets water and contaminants settle out rather than holding them in suspension, so keeping the reservoir clean and drained of water helps the anti-wear additives protect the system as intended.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478864191567,"sku":"2172.20","price":169.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2172-20-ultramax-32-hydraulic-oil-20l.webp?v=1785300727"},{"product_id":"2173-05","title":"2173.05 Ultramax 46 Hydraulic Oil 5L","description":"\u003cp\u003eValvoline Ultramax 46 is an ISO 46 anti-wear hydraulic oil, a zinc-based, non-detergent formulation that protects pumps and valves against wear, corrosion and high pressure. The ISO 46 grade is the all-round general-purpose choice for most industrial and mobile hydraulics, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 5L pack suits top-ups and small systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe all-round anti-wear hydraulic grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost hydraulic systems run best on a general-purpose ISO 46 grade, and this zinc-based, non-detergent anti-wear oil is built for exactly that broad duty. Its anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage. The non-detergent formulation lets water and contaminants separate out rather than holding them in suspension, which suits general hydraulic duty, while corrosion inhibitors protect the system internals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits mobile and industrial hydraulics specifying a general-purpose ISO 46 oil, from loaders and tippers to factory equipment. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause most hydraulic wear comes from contamination rather than tired oil, keep the fluid clean by storing it sealed, filtering on fill and maintaining the system filters, since fine grit scores pumps and valves. ISO 46 is the general-purpose grade that suits the majority of mobile and industrial systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. As a non-detergent oil it lets water and contaminants separate out, so draining any water from the reservoir and keeping the oil clean is what lets the anti-wear additives protect the system over the long term.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478871695439,"sku":"2173.05","price":48.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2173-05-ultramax-46-hydraulic-oil-5l.webp?v=1785300729"},{"product_id":"2173-20","title":"2173.20 Ultramax 46 Hydraulic Oil 20L","description":"\u003cp\u003eValvoline Ultramax 46 is an ISO 46 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves against wear, corrosion and high pressure. As the all-round general-purpose grade, it suits most industrial and mobile hydraulics and carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 20L pack is the practical workshop choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe all-round anti-wear hydraulic grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost hydraulic systems run best on a general-purpose ISO 46 grade, and this zinc-based, non-detergent anti-wear oil is built for exactly that broad duty. Its anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage. The non-detergent formulation lets water and contaminants separate out rather than holding them in suspension, which suits general hydraulic duty, while corrosion inhibitors protect the system internals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits mobile and industrial hydraulics specifying a general-purpose ISO 46 oil, from loaders and tippers to factory equipment. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause most hydraulic wear comes from contamination rather than tired oil, keep the fluid clean by storing it sealed, filtering on fill and maintaining the system filters, since fine grit scores pumps and valves. ISO 46 is the general-purpose grade that suits the majority of mobile and industrial systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. As a non-detergent oil it lets water and contaminants separate out, so draining any water from the reservoir and keeping the oil clean is what lets the anti-wear additives protect the system over the long term.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478879920207,"sku":"2173.20","price":169.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2173-20-ultramax-46-hydraulic-oil-20l.webp?v=1785300730"},{"product_id":"2174-05","title":"2174.05 Ultramax 68 Hydraulic Oil 5L","description":"\u003cp\u003eValvoline Ultramax 68 is an ISO 68 anti-wear hydraulic oil, a zinc-based, non-detergent formulation that protects pumps and valves against wear, corrosion and high pressure. The heavier ISO 68 grade suits higher-temperature and higher-pressure systems where a thicker film holds up better. It carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 5L pack suits top-ups and small systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier anti-wear oil for hot, high-pressure systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSystems that run hotter or at higher pressure need a thicker film that holds up under the load, which is where an ISO 68 grade comes in. This zinc-based, non-detergent anti-wear oil provides that heavier film, protecting pumps and valves against wear, corrosion and high pressure in demanding hydraulic systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing wear and the loss of pressure and internal leakage it causes. The heavier grade maintains that film under higher temperature and load, and the non-detergent formulation lets water and contaminants separate out in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits hydraulics running hot or under high load and specifying an ISO 68 oil. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep hydraulic oil clean, since fine contamination is the usual cause of pump and valve wear: store it sealed, filter on filling, and service the system filters. The heavier ISO 68 grade suits hotter or higher-pressure systems, but the correct choice is always the equipment maker's specified grade, so confirm before selecting. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. As a non-detergent oil it lets water and contaminants settle out rather than holding them in suspension, so keeping the reservoir clean and free of water helps the anti-wear additives protect the system as designed under higher temperature and load.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478885720143,"sku":"2174.05","price":48.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2174-05-ultramax-68-hydraulic-oil-5l.webp?v=1785300731"},{"product_id":"2174-20","title":"2174.20 Ultramax 68 Hydraulic Oil 20L","description":"\u003cp\u003eValvoline Ultramax 68 is an ISO 68 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves against wear, corrosion and high pressure. Its heavier grade suits higher-temperature and higher-pressure systems, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 20L pack is the practical workshop choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier anti-wear oil for hot, high-pressure systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSystems that run hotter or at higher pressure need a thicker film that holds up under the load, which is where an ISO 68 grade comes in. This zinc-based, non-detergent anti-wear oil provides that heavier film, protecting pumps and valves against wear, corrosion and high pressure in demanding hydraulic systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing wear and the loss of pressure and internal leakage it causes. The heavier grade maintains that film under higher temperature and load, and the non-detergent formulation lets water and contaminants separate out in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits hydraulics running hot or under high load and specifying an ISO 68 oil. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep hydraulic oil clean, since fine contamination is the usual cause of pump and valve wear: store it sealed, filter on filling, and service the system filters. The heavier ISO 68 grade suits hotter or higher-pressure systems, but the correct choice is always the equipment maker's specified grade, so confirm before selecting. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. As a non-detergent oil it lets water and contaminants settle out rather than holding them in suspension, so keeping the reservoir clean and free of water helps the anti-wear additives protect the system as designed under higher temperature and load.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478893584463,"sku":"2174.20","price":169.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2174-20-ultramax-68-hydraulic-oil-20l.webp?v=1785300732"},{"product_id":"2150-51","title":"2150.51 Ultramax HVI 32 Hydraulic Oil 205L","description":"\u003cp\u003eValvoline Ultramax HVI 32 is a high viscosity index ISO 32 hydraulic oil that holds a stable film from cold start to hot running, suiting mobile and outdoor equipment across seasons. It protects pumps and valves against wear and carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk choice for fleets and sites running mobile hydraulic equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA high-VI oil for mobile and outdoor hydraulics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eViscosity index measures how much an oil thins as it heats, and a high-VI oil changes viscosity less, staying close to its intended thickness whether cold on start-up or hot after hours of work. This ISO 32 high-VI hydraulic oil holds a stable film across that swing, which is exactly what mobile and outdoor equipment needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy that matters outdoors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMobile and outdoor equipment starts cold and works hot, and an ordinary hydraulic oil can be sluggish at start-up and too thin once warm. The high viscosity index keeps Ultramax HVI 32 in its working range across that swing, so pumps and valves get consistent flow and protection. The lighter ISO 32 grade suits systems that benefit from faster response and cold-weather flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAnti-wear protection and wide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt protects pumps and valves against wear and carries broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, meeting ISO 11158 HV and DIN 51524 Part 3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits mobile plant, machine tools, compressors and outdoor hydraulics that see a wide temperature range. Confirm the ISO grade your system specifies before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic systems fail more often from dirty oil than worn-out oil, so keep the fluid clean: store it sealed, filter on filling, and maintain the system's filters, since fine contamination is what scores pumps and valves. Match the ISO grade to the equipment maker's recommendation, and choose an HVI grade like this where the machine works across a wide temperature range and benefits from stable viscosity from cold start to hot running. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. Clean oil of the right grade is what lets the anti-wear additives protect the system as intended.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479053557839,"sku":"2150.51","price":1500.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2150-51-ultramax-hvi-32-hydraulic-oil-205l.webp?v=1793486720"},{"product_id":"2151-51","title":"2151.51 Ultramax HVI 46 Hydraulic Oil 205L","description":"\u003cp\u003eValvoline Ultramax HVI 46 is a high viscosity index ISO 46 hydraulic oil that holds a stable film across a wide temperature range, the versatile choice for mobile and outdoor equipment working through cold starts and hot loads. It protects pumps and valves and carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk option for fleets and sites.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe all-round high-VI hydraulic grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMobile and outdoor equipment starts cold and works hot, and an oil that thins less as it heats keeps that swing under control. This ISO 46 high-VI hydraulic oil is the versatile, general-purpose grade for most hydraulics, with the high viscosity index adding all-season consistency from a cold start through to sustained hot running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConsistent flow, cold to hot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause a high-VI oil thins less as it heats, Ultramax HVI 46 stays in its working range from a cold start through to sustained hot running, so pumps and valves get steady flow and protection whether the machine is starting on a cold morning or working hard in the heat of the day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAnti-wear protection and wide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt protects pumps and valves against wear and carries broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, meeting ISO 11158 HV and DIN 51524 Part 3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits mobile plant, machine tools, compressors and outdoor hydraulics needing all-season performance from one general-purpose grade. Confirm the ISO grade your system specifies before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause dirty oil, not tired oil, is the usual cause of hydraulic wear, keep the fluid clean by storing it sealed, filtering on fill, and maintaining the system filters so fine grit does not score pumps and valves. As the versatile general-purpose HVI grade, ISO 46 suits most mobile and outdoor systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. The high viscosity index holds the oil in its working range from cold start to hot running, so clean oil of the right grade lets the anti-wear additives protect the system as designed.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479056441423,"sku":"2151.51","price":1500.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2151-51-ultramax-hvi-46-hydraulic-oil-205l.webp?v=1793486720"},{"product_id":"2152-51","title":"2152.51 Ultramax HVI 68 Hydraulic Oil 205L","description":"\u003cp\u003eValvoline Ultramax HVI 68 is a high viscosity index ISO 68 hydraulic oil that holds a stable film across a wide temperature range, suited to hot, higher-load mobile and outdoor systems. It protects pumps and valves and carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk choice for fleets and sites running heavy mobile equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier high-VI oil for hot, higher-load systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHot, hard-working hydraulic systems need a heavier body that holds up where a lighter grade would thin too far. This ISO 68 high-VI oil provides that thicker film for higher-load mobile and outdoor systems, while the high viscosity index keeps it close to its intended thickness across a wide temperature range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilm strength across temperatures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe high viscosity index keeps the oil close to its intended thickness as it heats, and the ISO 68 grade provides a thicker film for higher-pressure, higher-temperature systems. Together they give pumps and valves a robust, consistent film whether the machine is cold or working hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAnti-wear protection and wide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt protects pumps and valves against wear and carries broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, meeting ISO 11158 HV and DIN 51524 Part 3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits hard-working mobile plant and outdoor hydraulics running hot under load and specifying an ISO 68. Confirm the ISO grade your system specifies before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep hydraulic oil clean, since fine contamination scores pumps and valves and is the usual cause of failure: store it sealed, filter on filling, and maintain the system filters. The heavier ISO 68 HVI grade suits hotter, higher-load systems, but the right choice is always the equipment maker's specified grade, so confirm before selecting. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. The high viscosity index keeps the oil in its working range across temperatures, so pumps and valves get a consistent film whether the machine is cold or working hard, and clean oil of the right grade is what makes that protection last.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479059128399,"sku":"2152.51","price":1500.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2152-51-ultramax-hvi-68-hydraulic-oil-205l.webp?v=1793486720"},{"product_id":"2172-51","title":"2172.51 Ultramax 32 Hydraulic Oil 205L","description":"\u003cp\u003eValvoline Ultramax 32 is an ISO 32 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves from wear, corrosion and high pressure. The lighter grade suits precision and cold-running systems, and it carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk choice for sites with multiple hydraulic systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn anti-wear hydraulic oil for precision systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic pumps and valves run at high pressure with fine clearances, and an anti-wear oil forms a protective film on those surfaces to prevent the wear that leads to lost pressure and internal leakage. This zinc-based, non-detergent ISO 32 grade delivers that protection in precision and cooler-running systems where fast oil response matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic pumps and valves run at high pressure with fine clearances, and the zinc anti-wear additives form a protective film on those surfaces to prevent the metal-to-metal wear that leads to lost pressure and internal leakage. The non-detergent formulation is designed to let water and contaminants separate out rather than holding them in suspension, which suits general hydraulic service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, so it matches the requirement for most industrial and mobile systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits machine tools and precision hydraulics specifying an ISO 32 anti-wear oil. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHydraulic systems wear from dirty oil far more than from worn-out oil, so keep the fluid clean: store it sealed, filter on filling, and keep the system filters serviced, since fine grit is what damages pumps and valves. The lighter ISO 32 grade suits precision and cooler-running systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. As a non-detergent oil it lets water and contaminants settle out rather than holding them in suspension, so keeping the reservoir clean and drained of water helps the anti-wear additives protect the system as intended.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479061782607,"sku":"2172.51","price":1350.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2172-51-ultramax-32-hydraulic-oil-205l.webp?v=1793486720"},{"product_id":"2173-51","title":"2173.51 Ultramax 46 Hydraulic Oil 205L","description":"\u003cp\u003eValvoline Ultramax 46 is an ISO 46 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves from wear, corrosion and high pressure. The all-round ISO 46 grade suits most industrial and mobile hydraulics, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk choice for sites running multiple hydraulic systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe all-round anti-wear hydraulic grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost hydraulic systems run best on a general-purpose ISO 46 grade, and this zinc-based, non-detergent anti-wear oil is built for exactly that broad duty. Its anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage. The non-detergent formulation lets water and contaminants separate out rather than holding them in suspension, which suits general hydraulic duty, while corrosion inhibitors protect the system internals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits mobile and industrial hydraulics specifying a general-purpose ISO 46 oil, from loaders and tippers to factory equipment. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause most hydraulic wear comes from contamination rather than tired oil, keep the fluid clean by storing it sealed, filtering on fill and maintaining the system filters, since fine grit scores pumps and valves. ISO 46 is the general-purpose grade that suits the majority of mobile and industrial systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. As a non-detergent oil it lets water and contaminants separate out, so draining any water from the reservoir and keeping the oil clean is what lets the anti-wear additives protect the system over the long term.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479062634575,"sku":"2173.51","price":1350.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2173-51-ultramax-46-hydraulic-oil-205l.webp?v=1793486720"},{"product_id":"2174-51","title":"2174.51 Ultramax 68 Hydraulic Oil 205L","description":"\u003cp\u003eValvoline Ultramax 68 is an ISO 68 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves from wear, corrosion and high pressure. The heavier grade suits higher-temperature and higher-pressure systems, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk choice for sites with multiple heavy-duty systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier anti-wear oil for hot, high-pressure systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSystems that run hotter or at higher pressure need a thicker film that holds up under the load, which is where an ISO 68 grade comes in. This zinc-based, non-detergent anti-wear oil provides that heavier film, protecting pumps and valves against wear, corrosion and high pressure in demanding hydraulic systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing wear and the loss of pressure and internal leakage it causes. The heavier grade maintains that film under higher temperature and load, and the non-detergent formulation lets water and contaminants separate out in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits hydraulics running hot or under high load and specifying an ISO 68 oil. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep hydraulic oil clean, since fine contamination is the usual cause of pump and valve wear: store it sealed, filter on filling, and service the system filters. The heavier ISO 68 grade suits hotter or higher-pressure systems, but the correct choice is always the equipment maker's specified grade, so confirm before selecting. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. As a non-detergent oil it lets water and contaminants settle out rather than holding them in suspension, so keeping the reservoir clean and free of water helps the anti-wear additives protect the system as designed under higher temperature and load.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479065813071,"sku":"2174.51","price":1350.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2174-51-ultramax-68-hydraulic-oil-205l.webp?v=1793486757"},{"product_id":"2173","title":"2173 IBC Ultramax 46 Hydraulic Oil 1000L","description":"\u003cp\u003eValvoline Ultramax 46 is an ISO 46 anti-wear hydraulic oil, a zinc-based, non-detergent formulation that protects pumps and valves against wear, corrosion and high pressure. As the all-round general-purpose grade, it suits most industrial and mobile hydraulics and carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. Supplied in a 1000L IBC for high-volume dispensing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe all-round anti-wear hydraulic grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost hydraulic systems run best on a general-purpose ISO 46 grade, and this zinc-based, non-detergent anti-wear oil is built for exactly that broad duty. Its anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage. The non-detergent formulation lets water and contaminants separate out rather than holding them in suspension, which suits general hydraulic duty, while corrosion inhibitors protect the system internals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits mobile and industrial hydraulics specifying a general-purpose ISO 46 oil, from loaders and tippers to factory equipment. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause most hydraulic wear comes from contamination rather than tired oil, keep the fluid clean by storing it sealed, filtering on fill and maintaining the system filters, since fine grit scores pumps and valves. ISO 46 is the general-purpose grade that suits the majority of mobile and industrial systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. As a non-detergent oil it lets water and contaminants separate out, so draining any water from the reservoir and keeping the oil clean is what lets the anti-wear additives protect the system over the long term.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479138984015,"sku":"2173","price":5800.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2173-ibc-ultramax-46-hydraulic-oil-1000l.webp?v=1785300948"},{"product_id":"2174","title":"2174 IBC Ultramax 68 Hydraulic Oil 1000L","description":"\u003cp\u003eValvoline Ultramax 68 is an ISO 68 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves against wear, corrosion and high pressure. Its heavier grade suits higher-temperature and higher-pressure systems, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. Supplied in a 1000L IBC for high-volume dispensing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier anti-wear oil for hot, high-pressure systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSystems that run hotter or at higher pressure need a thicker film that holds up under the load, which is where an ISO 68 grade comes in. This zinc-based, non-detergent anti-wear oil provides that heavier film, protecting pumps and valves against wear, corrosion and high pressure in demanding hydraulic systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anti-wear chemistry protects the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing wear and the loss of pressure and internal leakage it causes. The heavier grade maintains that film under higher temperature and load, and the non-detergent formulation lets water and contaminants separate out in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits hydraulics running hot or under high load and specifying an ISO 68 oil. Confirm the grade your system requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleanliness and grade selection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep hydraulic oil clean, since fine contamination is the usual cause of pump and valve wear: store it sealed, filter on filling, and service the system filters. The heavier ISO 68 grade suits hotter or higher-pressure systems, but the correct choice is always the equipment maker's specified grade, so confirm before selecting. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. As a non-detergent oil it lets water and contaminants settle out rather than holding them in suspension, so keeping the reservoir clean and free of water helps the anti-wear additives protect the system as designed under higher temperature and load.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479141474383,"sku":"2174","price":5800.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-2174-ibc-ultramax-68-hydraulic-oil-1000l.webp?v=1785300949"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/Hydraulic-Oil_Category-Image.webp?v=1781693508","url":"https:\/\/geelongfiltersales.com.au\/collections\/hydraulic-oils.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}