{"title":"Semi Synthetic Engine Oils","description":"\u003cp\u003eSemi-synthetic engine oil blends mineral and synthetic base oils to give better heat resistance and cold-start flow than a straight mineral oil, at a lower price than a full synthetic. It suits many of the cars, 4WDs, utes and light commercials on the road, particularly petrol and diesel engines built before the shift to very thin, low-ash oils, and workshops often use it as the everyday choice for older vehicles.\u003c\/p\u003e\u003cp\u003eTwo things decide the fit: the viscosity grade on the filler cap, and whether the API or ACEA spec on the label meets what the handbook asks for. Put a semi-synthetic in an engine that specifies a full synthetic or a low-ash C-rated oil and you risk shorter oil life, particulate filter problems and a warranty dispute. Check the handbook first, then browse by grade.\u003c\/p\u003e","products":[{"product_id":"1021-20","title":"1021.20 DuraBlend 10W30 Semi Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline DuraBlend 10W30 is a semi-synthetic multigrade engine oil for modern petrol engines to API SP and ILSAC GF-6A. Its part-synthetic base improves cold-start flow and holds a stable film at temperature, protecting against wear and deposits through everyday driving. The 20L pack is the practical choice for workshops and operators servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA modern semi-synthetic for petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost engine wear happens at two moments: the first seconds after a cold start, before oil reaches the top end, and again under sustained load when hot. A semi-synthetic 10W30 covers both, flowing faster on cold start than a mineral oil and holding a stable film at temperature, all while meeting the latest API SP and ILSAC GF-6A standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection at start-up and under load\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost engine wear happens in the first seconds after a cold start, before oil reaches the top end, and again under sustained load when hot. The improved cold flow of the semi-synthetic base gets oil circulating faster on start-up, and the stable hot film protects under load. The API SP additive package adds protection against low-speed pre-ignition (LSPI) and timing-chain wear that matter on modern engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent-standard performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeeting API SP and ILSAC GF-6A means it carries the latest petrol engine protection, including deposit and wear control that keep the engine clean and efficient between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol passenger cars and light commercials that specify a 10W30 multigrade. Confirm the grade your engine calls for before selecting, since modern engines are designed around a particular viscosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 10W30 semi-synthetic suits modern petrol engines that specify this grade and want strong protection without the cost of a full synthetic, so check your engine's grade and specification before selecting. Follow the service schedule for oil and filter changes, and shorten the interval for stop-start city driving, short trips or towing, which work an oil harder than steady highway running. Top up with the same grade, and there is no issue moving between a semi-synthetic and a synthetic of the same specification at a change. Meeting the latest API SP and ILSAC GF-6A, it carries current protection against wear, deposits and low-speed pre-ignition on modern engines.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478415466575,"sku":"1021.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1021-20-durablend-10w30-semi-synthetic-engine-oil-front-view.webp?v=1793486720"},{"product_id":"1022-20","title":"1022.20 DuraBlend 10W40 Semi Synthetic Engine Oil 20L","description":"\u003cp\u003eValvoline DuraBlend 10W40 is a semi-synthetic multigrade engine oil for petrol engines needing a heavier 40 hot grade, carrying ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals. Its part-synthetic base improves cold-start flow while the 40 film holds up under sustained heat and load. The 20L pack is the practical workshop choice for regular servicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier semi-synthetic for engines that specify a 40\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome engines are built around a heavier hot film, either for their tolerances or the loads they run, and specifying a 40 grade holds that film where a lighter oil would thin. This semi-synthetic 10W40 delivers it, flowing well on cold start while carrying ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals for the engines that call for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the 40 grade and the European approvals matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome engines are designed around a heavier hot film, either for their tolerances or the loads they run, and specifying a 40 grade holds that film where a lighter oil would thin. DuraBlend 10W40 carries ACEA A3\/B4 along with Volkswagen and Mercedes-Benz approvals, which are the standards European petrol engines of this type are built around, so it meets the requirement rather than just the viscosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReliable everyday protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe semi-synthetic base and additive package deliver dependable cold-start flow, deposit control and wear protection across the duty cycle, keeping the engine clean and protected between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol cars and light commercials that call for a 10W40 multigrade, particularly European models specifying ACEA A3\/B4. Confirm the grade and any approval your engine requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 10W40 grade and its European approvals point to engines designed around a heavier hot film, so confirm your engine specifies a 10W40 and any ACEA A3\/B4 or maker approval before selecting rather than substituting a lighter oil. Follow the service schedule, and shorten the interval for stop-start, short-trip or towing duty that works the oil harder. Top up with the same grade, and moving between a semi-synthetic and a synthetic of the same specification at a change is fine. The heavier film suits engines that run hotter or were built for a 40 grade, holding protection where a 30 would thin, while the additive package keeps the engine clean between services.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478423986255,"sku":"1022.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1022-20-durablend-10w40-20l.webp?v=1785300645"},{"product_id":"1021-05","title":"1021.05 DuraBlend 10W30 Semi Synthetic Engine Oil 5L","description":"\u003cp\u003eValvoline DuraBlend 10W30 is a semi-synthetic multigrade engine oil for modern petrol engines, meeting the latest API SP and ILSAC GF-6A standards. The part-synthetic base flows better on cold start than a mineral oil and holds its film at operating temperature, covering the two moments engines wear hardest: the first seconds after start-up and sustained load when hot. The 5L pack suits a single-car service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA modern semi-synthetic for petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost engine wear happens at two moments: the first seconds after a cold start, before oil reaches the top end, and again under sustained load when hot. A semi-synthetic 10W30 covers both, flowing faster on cold start than a mineral oil and holding a stable film at temperature, all while meeting the latest API SP and ILSAC GF-6A standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection at start-up and under load\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost engine wear happens in the first seconds after a cold start, before oil reaches the top end, and again under sustained load when hot. The improved cold flow of the semi-synthetic base gets oil circulating faster on start-up, and the stable hot film protects under load. The API SP additive package adds protection against low-speed pre-ignition (LSPI) and timing-chain wear that matter on modern engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent-standard performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeeting API SP and ILSAC GF-6A means it carries the latest petrol engine protection, including deposit and wear control that keep the engine clean and efficient between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol passenger cars and light commercials that specify a 10W30 multigrade. Confirm the grade your engine calls for before selecting, since modern engines are designed around a particular viscosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 10W30 semi-synthetic suits modern petrol engines that specify this grade and want strong protection without the cost of a full synthetic, so check your engine's grade and specification before selecting. Follow the service schedule for oil and filter changes, and shorten the interval for stop-start city driving, short trips or towing, which work an oil harder than steady highway running. Top up with the same grade, and there is no issue moving between a semi-synthetic and a synthetic of the same specification at a change. Meeting the latest API SP and ILSAC GF-6A, it carries current protection against wear, deposits and low-speed pre-ignition on modern engines.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479118635087,"sku":"1021.05","price":56.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1021-05-durablend-10w30-semi-synthetic-engine-oil-5l.webp?v=1794951819"},{"product_id":"1022-05","title":"1022.05 DuraBlend 10W40 Semi Synthetic Engine Oil 5L","description":"\u003cp\u003eValvoline DuraBlend 10W40 is a semi-synthetic multigrade engine oil for petrol engines that specify a heavier 40 hot grade or run hotter under load. The part-synthetic base flows well on cold start, while the 40 film gives extra protection at temperature, and it carries ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals. The 5L pack suits a single-vehicle service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier semi-synthetic for engines that specify a 40\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome engines are built around a heavier hot film, either for their tolerances or the loads they run, and specifying a 40 grade holds that film where a lighter oil would thin. This semi-synthetic 10W40 delivers it, flowing well on cold start while carrying ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals for the engines that call for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the 40 grade and the European approvals matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome engines are designed around a heavier hot film, either for their tolerances or the loads they run, and specifying a 40 grade holds that film where a lighter oil would thin. DuraBlend 10W40 carries ACEA A3\/B4 along with Volkswagen and Mercedes-Benz approvals, which are the standards European petrol engines of this type are built around, so it meets the requirement rather than just the viscosity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReliable everyday protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe semi-synthetic base and additive package deliver dependable cold-start flow, deposit control and wear protection across the duty cycle, keeping the engine clean and protected between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol cars and light commercials that call for a 10W40 multigrade, particularly European models specifying ACEA A3\/B4. Confirm the grade and any approval your engine requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 10W40 grade and its European approvals point to engines designed around a heavier hot film, so confirm your engine specifies a 10W40 and any ACEA A3\/B4 or maker approval before selecting rather than substituting a lighter oil. Follow the service schedule, and shorten the interval for stop-start, short-trip or towing duty that works the oil harder. Top up with the same grade, and moving between a semi-synthetic and a synthetic of the same specification at a change is fine. The heavier film suits engines that run hotter or were built for a 40 grade, holding protection where a 30 would thin, while the additive package keeps the engine clean between services.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479122403407,"sku":"1022.05","price":58.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1022-05-durablend-10w40-engine-oil-5l.webp?v=1793486758"},{"product_id":"1023-05","title":"1023.05 DuraBlend 5W30 Semi Synthetic Engine Oil 5L","description":"\u003cp\u003eValvoline DuraBlend 5W30 is a semi-synthetic multigrade engine oil for modern petrol engines, meeting the latest API SP and ILSAC GF-6A standards. The 5W grade delivers quicker oil flow on cold start than a 10W, getting pressure to the top end faster, while the 30 hot grade suits engines specifying a lighter, more fuel-efficient film. Supplied in a 5L pack for single-car service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFast cold starts for modern petrol engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 5W cold grade is the point of difference here: it flows faster on a cold start than a 10W, getting oil pressure to the top end sooner, while the 30 hot grade suits engines built for a lighter, more fuel-efficient film. This semi-synthetic multigrade pairs that with the latest API SP and ILSAC GF-6A protection for modern petrol engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection where engines wear\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCold starts cause a large share of engine wear, so quicker oil flow at start-up directly protects the valvetrain and bearings. The 30 hot grade keeps friction and drag down for fuel economy, while the API SP additive package guards against low-speed pre-ignition and keeps deposits in check on modern direct-injection and multi-valve engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent-standard performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeeting API SP and ILSAC GF-6A means it carries the latest petrol engine protection for cleanliness, wear and efficiency between services.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits modern petrol passenger cars that specify a 5W30 multigrade. Confirm the grade your engine calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 5W30 is chosen for modern petrol engines that want fast cold starts and fuel efficiency, so it suits engines specifying this grade rather than older units built around a heavier oil, and checking the requirement first avoids running an oil that is too thin or too thick. Follow the service schedule for oil and filter changes, shortening it for stop-start, short-trip or towing duty. Top up with the same grade, and switching between a semi-synthetic and a synthetic of the same specification at a change is straightforward. Meeting the latest API SP and ILSAC GF-6A, it carries current protection for cleanliness, wear and efficiency on modern engines.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45482246176847,"sku":"1023.05","price":56.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1023-05-durablend-5w30-semi-synthetic-engine-oil-5l.webp?v=1785301280"},{"product_id":"1344-05","title":"1344.05 DuraBlend 15W40 Semi Synthetic Engine Oil 5L","description":"\u003cp\u003eValvoline DuraBlend 15W40 is a semi-synthetic multigrade engine oil built for workshop realities: heat, load, stop-start running and the slow creep of deposits over time. Blending synthetic and mineral base oils with an advanced additive system, it delivers strong protection across the full duty cycle and carries ACEA A3\/B4 with Volkswagen and Mercedes-Benz approvals. Supplied in a 5L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA workshop-ready semi-synthetic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeat, load, stop-start running and the slow build of deposits are the realities a workshop oil has to handle, and this 15W40 semi-synthetic is built for them. Blending synthetic and mineral base oils with an advanced additive system, it delivers strong, dependable protection across the full duty cycle, backed by ACEA A3\/B4 with VW and Mercedes-Benz approvals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBalanced protection across the duty cycle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe semi-synthetic base improves oxidation resistance and film stability over a straight mineral oil, so it holds up under sustained heat and load, while the 15W40 grade provides a robust film for engines that specify it. Detergents and dispersants keep deposits in suspension, so the engine stays clean between services rather than building varnish and sludge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEuropean approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries ACEA A3\/B4 along with Volkswagen and Mercedes-Benz approvals, the standards petrol engines of this type are designed around, so it meets the specification as well as the grade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits petrol cars and light commercials wanting a dependable 15W40 semi-synthetic, particularly engines run hard or in stop-start service. Confirm the grade and any approval your engine requires before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing and changing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 15W40 semi-synthetic suits petrol engines specifying this grade, particularly those run hard or in stop-start service, and its ACEA A3\/B4 rating with VW and Mercedes-Benz approvals points to the engines it is designed for, so confirm the requirement before selecting. Follow the service schedule and shorten the interval for severe, short-trip or towing duty that loads the oil. Top up with the same grade, and moving to a synthetic of the same specification at a change is fine. The robust 15W40 film and strong detergency handle heat, load and deposits across the duty cycle, which is exactly what a workshop wants from a dependable everyday oil.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45482267410511,"sku":"1344.05","price":56.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1344-05-durablend-15w40-semi-synthetic-engine-oil-5l.webp?v=1785301286"},{"product_id":"1360-06","title":"1360.06 Engine Armour 5W30 Synthetic Technology Engine Oil 6L","description":"\u003cp\u003eValvoline Engine Armour Synthetic Technology 5W30 is a semi-synthetic engine oil for petrol passenger cars, SUVs and light commercial vehicles, formulated on a combination of high-tech synthetic and premium conventional base stocks with latest generation additive technology. It meets the current API SP and ILSAC GF-6A standards, including the Low-Speed Pre-Ignition protection turbocharged and naturally aspirated direct-injection petrol engines require, and carries Ford WSS-M2C-946-A. Petrol engines only. \u003c\/p\u003e\n\u003c!-- more: read more below --\u003e\n\u003ch3\u003eCurrent-standard protection for petrol engines\u003c\/h3\u003e\n\u003cp\u003eAPI SP and ILSAC GF-6A are the latest industry standards for petrol engine oils, and Engine Armour Synthetic Technology 5W30 meets both. API SP is fully backwards compatible with API SN Plus\/RC and can be used where API SN, SM, SL and SJ is recommended, so one grade covers a wide span of petrol vehicles on the road today.\u003c\/p\u003e\n\u003ch3\u003eWhy LSPI protection matters\u003c\/h3\u003e\n\u003cp\u003eLow-Speed Pre-Ignition is a destructive combustion event that turbocharged gasoline direct injection (TGDI) and gasoline direct injection (GDI) engines can suffer at low engine speed and high load, and it is serious enough that OEMs called for engine oils formulated to help prevent it. This oil was specially developed in response. Alongside that, the advanced additive system provides excellent wear protection and enhances engine life without affecting emissions system lifetime, and viscosity control delivers enhanced durability and lower oil consumption.\u003c\/p\u003e\n\u003ch3\u003eCold flow and deposit control\u003c\/h3\u003e\n\u003cp\u003eLow temperature viscosity control results in easy cold start while providing maximum cold start protection: CCS viscosity is below 6700 mPa.s at –30 °C and the pour point is –42 °C. Against a conventional motor oil, the formulation gives improved wear control, deposit protection, volatility and low temperature flow, which is what helps an engine maintain peak performance longer. It also meets ILSAC GF-5 and Ford WSS-M2C-946-A.\u003c\/p\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eIt suits virtually all naturally aspirated, turbocharged and supercharged petrol passenger cars, passenger SUVs and light commercial vehicles specifying a 5W30, including engines running the longer drain intervals found in today's passenger vehicles. It is not recommended for use in diesel fuelled engines. Always consult the vehicle owner's manual before use.\u003c\/p\u003e\n\u003ch3\u003eChoosing and changing it\u003c\/h3\u003e\n\u003cp\u003eChoose Engine Armour Synthetic Technology 5W30 when your petrol engine specifies a 5W30 and you want current API SP and ILSAC GF-6A protection, including LSPI defence if the engine is direct-injection or turbocharged. Confirm the grade and any maker approval in the owner's manual before selecting, since the oil that matches the specification is the one that protects. Follow the service schedule for oil and filter changes and shorten it for stop-start, short-trip or towing duty. Top up with the same grade, and keep it to petrol engines.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":46550193897551,"sku":"1360.06","price":69.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1360-06-engine-armour-5w30-engine-oil-6l-front.webp?v=1793486690"},{"product_id":"1361-06","title":"1361.06 Engine Armour 10W30 Synthetic Technology Engine Oil 6L","description":"\u003cp\u003eValvoline Engine Armour Synthetic Technology 10W30 is a semi-synthetic engine oil for petrol passenger cars, SUVs and light commercial vehicles, built on a combination of high-tech synthetic and premium conventional base stocks with latest generation additive technology. It meets the current API SQ and ILSAC GF-7A standards, is API Resource Conserving, and carries Low-Speed Pre-Ignition protection for turbocharged and direct-injection petrol engines. Petrol engines only. \u003c\/p\u003e\n\u003c!-- more: read more below --\u003e\n\u003ch3\u003eCurrent API SQ and ILSAC GF-7A protection\u003c\/h3\u003e\n\u003cp\u003eAPI SQ and ILSAC GF-7A are the latest petrol engine oil standards, and Engine Armour Synthetic Technology 10W30 meets both. API SQ is fully backwards compatible with API SP and API SN Plus\/RC and can be used where API SN, SM and SL is recommended, so a single grade covers a wide span of petrol vehicles. It also meets ILSAC GF-6A, GF-5 and GF-4 and carries the API Resource Conserving designation.\u003c\/p\u003e\n\u003ch3\u003eWhy LSPI protection matters\u003c\/h3\u003e\n\u003cp\u003eLow-Speed Pre-Ignition is a destructive combustion event that turbocharged gasoline direct injection (TGDI) and gasoline direct injection (GDI) engines can suffer at low engine speed and high load, and OEMs specifically called for engine oils that help prevent it. This oil was developed in response. The advanced additive system also provides excellent wear protection and enhances engine life without affecting emissions system lifetime, while viscosity control delivers enhanced durability and lower oil consumption.\u003c\/p\u003e\n\u003ch3\u003eCold flow and deposit control\u003c\/h3\u003e\n\u003cp\u003eLow temperature viscosity control results in easy cold start while providing maximum cold start protection: CCS viscosity is below 6700 mPa.s at –25 °C and the pour point is –39 °C. Against a conventional motor oil, the formulation gives improved wear control, deposit protection, volatility and low temperature flow, which is what helps an engine maintain peak performance longer between services.\u003c\/p\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eIt suits virtually all naturally aspirated, turbocharged and supercharged petrol passenger cars, passenger SUVs and light commercial vehicles specifying a 10W30, including engines running the longer drain intervals found in today's passenger vehicles. It is not recommended for use in diesel fuelled engines. Always consult the vehicle owner's manual before use.\u003c\/p\u003e\n\u003ch3\u003eChoosing and changing it\u003c\/h3\u003e\n\u003cp\u003eChoose Engine Armour Synthetic Technology 10W30 when your petrol engine specifies a 10W30 and you want the current API SQ and ILSAC GF-7A standards rather than an older API SN or GF-5 oil, particularly if the engine is turbocharged or direct-injection and needs LSPI protection. Confirm the grade and any maker approval in the owner's manual before selecting. Follow the service schedule for oil and filter changes and shorten it for stop-start, short-trip or towing duty. Top up with the same grade, and keep it to petrol engines.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":46550201466959,"sku":"1361.06","price":69.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1361-06-engine-armour-10w30-engine-oil-6l-front.webp?v=1793486690"},{"product_id":"1362-06","title":"1362.06 Engine Armour 10W40 Synthetic Technology Engine Oil 6L","description":"\u003cp\u003eValvoline Engine Armour Synthetic Technology 10W40 is a semi-synthetic engine oil for petrol and diesel passenger cars and light commercial vehicles, formulated on a combination of synthetic and mineral base oils with an advanced additive system. It meets API SP and is rated ACEA A3\/B4, with VW 501.01, 502.00 and 505.00 and MB 229.1 coverage. The 40 hot grade holds a firm film under sustained load and heat. \u003c\/p\u003e\n\u003c!-- more: read more below --\u003e\n\u003ch3\u003eOne semi-synthetic for petrol and diesel\u003c\/h3\u003e\n\u003cp\u003eEngine Armour Synthetic Technology 10W40 was developed to meet the demanding requirements of the engine manufacturers, combining synthetic and mineral base oils with the most advanced additive system available. That mix is what lets a single grade cover both petrol and light duty diesel engines in passenger cars and light commercials rather than needing a separate oil for each.\u003c\/p\u003e\n\u003ch3\u003eWhy the ACEA A3\/B4 rating matters\u003c\/h3\u003e\n\u003cp\u003eACEA A3\/B4 is the European rating for petrol and direct-injection diesel engines that run a full-viscosity, high-SAPS oil, and it is what a large share of European vehicles specify. It goes with a formulation built for stay-in-grade performance: viscosity control delivers enhanced durability and lower oil consumption, while the additive system fights the major causes of engine stress – heat, deposits and wear – from start-up to shut down without affecting emissions system lifetime.\u003c\/p\u003e\n\u003ch3\u003eApprovals and cold start\u003c\/h3\u003e\n\u003cp\u003eIt meets API SP and API SN, SM and SL, is rated ACEA A3\/B4, and carries VW 501.01, 502.00 and 505.00 and MB 229.1, so it matches the requirement rather than just the grade for a wide range of European vehicles. Low temperature viscosity control results in easy cold start while providing maximum cold start protection, with a CCS viscosity below 6700 mPa.s at –25 °C and a pour point of –39 °C.\u003c\/p\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eIt suits passenger and light duty commercial vehicles fitted with petrol or diesel engines specifying a 10W40, including naturally aspirated and turbocharged applications. Please consult the owner's manual before use.\u003c\/p\u003e\n\u003ch3\u003eChoosing and changing it\u003c\/h3\u003e\n\u003cp\u003eChoose Engine Armour Synthetic Technology 10W40 when the vehicle specifies a 10W40 and an ACEA A3\/B4 oil, or where a VW 501.01\/502.00\/505.00 or MB 229.1 requirement applies – that approval list is the reason to pick it over a general-purpose 10W40. Confirm the grade and approval in the owner's manual first. Follow the service schedule for oil and filter changes and shorten it for stop-start, short-trip, towing or heavy-load duty. Top up with the same grade.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":46550203400271,"sku":"1362.06","price":72.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1362-06-engine-armour-10w40-engine-oil-6l-front.webp?v=1793486690"},{"product_id":"1363-06","title":"1363.06 Engine Armour 15W40 Synthetic Technology Engine Oil 6L","description":"\u003cp\u003eValvoline Engine Armour Synthetic Technology 15W40 is a semi-synthetic engine oil for petrol and diesel passenger cars and light commercial vehicles, formulated on a combination of synthetic and mineral base oils with an advanced additive system. It meets API SP and is rated ACEA A3\/B4, with VW 501.01, 502.00 and 505.00 and MB 229.1 coverage, and is also suitable for older passenger diesel engines where an API CF oil is recommended.\u003c\/p\u003e\n\u003c!-- more: read more below --\u003e\n\u003ch3\u003eA 15W40 that covers petrol and older diesel\u003c\/h3\u003e\n\u003cp\u003eEngine Armour Synthetic Technology 15W40 was developed to meet the demanding requirements of the engine manufacturers, combining synthetic and mineral base oils with the most advanced additive system available. The 15W40 grade suits warmer operating climates and older engines, and the same fill covers petrol vehicles and older passenger diesels where an API CF specification oil is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhy the ACEA A3\/B4 rating matters\u003c\/h3\u003e\n\u003cp\u003eACEA A3\/B4 is the European rating for petrol and direct-injection diesel engines that run a full-viscosity, high-SAPS oil, and it goes with a formulation built to hold its grade in service. Viscosity control delivers enhanced durability and lower oil consumption, while the additive system fights the major causes of engine stress – heat, deposits and wear – from start-up to shut down, and provides wear protection without affecting emissions system lifetime.\u003c\/p\u003e\n\u003ch3\u003eApprovals and operating range\u003c\/h3\u003e\n\u003cp\u003eIt meets API SP and API SN, SM and SL, is rated ACEA A3\/B4, and carries VW 501.01, 502.00 and 505.00 and MB 229.1. The 15W cold grade gives a CCS viscosity of 6000 mPa.s at –20 °C with a pour point of –39 °C, and a 232 °C flash point at the hot end, so it covers Australian operating conditions in an engine specified on a 15W40.\u003c\/p\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eIt suits passenger and light duty commercial vehicles fitted with petrol or diesel engines specifying a 15W40, including naturally aspirated and turbocharged applications, and older passenger vehicles with diesel engines where an API CF oil is recommended. Please consult the owner's manual before use.\u003c\/p\u003e\n\u003ch3\u003eChoosing and changing it\u003c\/h3\u003e\n\u003cp\u003eChoose Engine Armour Synthetic Technology 15W40 when the vehicle specifies a 15W40 – typically an older or higher-mileage petrol or diesel engine – and you want ACEA A3\/B4 and API SP protection with VW and Mercedes-Benz coverage behind it. A 15W cold grade is heavier on start-up than a 10W or 5W, so do not substitute it into an engine specified on a lighter grade; check the owner's manual first. Follow the service schedule and shorten it for stop-start, short-trip, towing or heavy-load duty. Top up with the same grade.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":46550205366351,"sku":"1363.06","price":69.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1363-06-engine-armour-15w40-engine-oil-6l-front.webp?v=1793486690"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/Semi-Synthetic-Engine-Oil_Category-Image.webp?v=1781693672","url":"https:\/\/geelongfiltersales.com.au\/collections\/semi-synthetic.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}