{"title":"Trade Specials","description":"\u003cp\u003eTrade specials are selected filters, oils and lubricants, and fluid transfer and workshop equipment on special for mechanics, fleet managers, farmers and equipment operators. Specials run each calendar quarter and are matched to the offers our suppliers are running at the time, so the line-up changes every three months.\u003c\/p\u003e\u003cp\u003eThat makes this a good page to check when you're planning a quarterly service run or stocking up on regular-use filters and fluids. A deal only counts if the part suits the machine. The wrong filter or oil grade on special still means a return at best, and damage or a warranty dispute at worst, so \u003cstrong\u003econfirm part numbers and specs before you order\u003c\/strong\u003e. More on making the most of each quarter is below.\u003c\/p\u003e","products":[{"product_id":"af-fs-al60","title":"FuelShot FS-AL60 3\/4\" Standard Automatic Shut-Off Diesel Nozzle 60 lpm","description":"\u003cp\u003eA diesel nozzle that keeps flowing after the tank is full turns a routine refuel into a spill, a cleanup and a fuel loss you wear. That is the job the FuelShot FS-AL60 is built for, a 3\/4in automatic shut-off nozzle that cuts the flow at full and suits small to mid-sized transfer setups.\u003c\/p\u003e\n\u003cp\u003eThe nozzle flows up to 60 lpm, which suits small and mid-sized transfer pumps rather than high-volume truck fills. The automatic shut-off is the feature that matters day to day: it senses when the tank reaches capacity and stops the flow, so an operator filling machinery on site is not standing over the nozzle waiting to catch the cut-off by hand. That is what keeps diesel out of the dirt and off the deck.\u003c\/p\u003e\n\u003cp\u003eThe body is aluminium with NBR seals, a combination chosen to resist wear from diesel and biodiesel blends rather than generic seals that harden and weep once fuel gets to them. Over a season of daily fills that is the difference between a nozzle that keeps sealing and one that starts dribbling at the spout.\u003c\/p\u003e\n\u003cp\u003eConnection is a 3\/4in BSP inlet with a 19mm spout. Australian transfer plumbing is typically BSP, so it threads onto common pump outlets without an adapter, and the 19mm spout fits the fill necks on most small and mid plant, light trucks and equipment tanks. An integrated swivel connector lets the nozzle turn in the hand as you position it, which takes the twist out of the hose and the strain off your wrist across a shift of fills.\u003c\/p\u003e\n\u003cp\u003eFluid rated for diesel and biodiesel blends. It is a fuel-transfer nozzle and is not intended for petrol, oils or DEF\/AdBlue. It fits workshops, farms, construction sites and transport fleets running their own diesel from tanks or transfer pumps.\u003c\/p\u003e\n\u003cp\u003eHandling stays simple over a long day of fills. The nozzle is light in the hand, and with the automatic shut-off doing the watching, an operator can hold the machine or the hose with the other hand rather than gripping the trigger through the whole fill. On a farm or a site where one person fuels several machines back to back, that is less standing time and less diesel on the ground across the shift.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you connect it to a transfer pump or hose ending in a 3\/4in BSP fitting. If you fill trucks or larger machinery and 60 lpm is slower than you want, the 1in FS-AL120 in the same range flows up to 120 lpm; size the nozzle to the tanks you fill most.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482124050511,"sku":"AF-FS-AL60","price":143.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/fuelshot-af-fs-al60-3-4-standard-automatic-shut-off-diesel-nozzle.webp?v=1794952199"},{"product_id":"af-fp-984330","title":"AF-FP-984330 Digital Metered Oil Control Gun, Flexible Outlet, IP65, Ergonomic, 30 lpm","description":"\u003cp\u003eWhere oil is charged to jobs by volume, the meter is not a convenience, it is the basis for how you bill. That is what the AF-FP-984330 is built to protect, a digital metered oil control gun that delivers accurate, repeatable fills so top-ups stay clean and the paperwork stays honest.\u003c\/p\u003e\n\u003cp\u003eThe gun pairs an aluminium body with an integrated electronic meter, delivering up to 30 lpm at 70 bar (7,000 kPa \/ 1,015 psi) and holding ±0.5% accuracy on the back-lit display. The point of that accuracy is consistency across the whole flow range, not just at a single calibration point, which is what a workshop charging by volume needs across both slow top-ups and fast sump refills. Over a month of fills, that is the difference between stock that reconciles and stock that quietly walks.\u003c\/p\u003e\n\u003cp\u003eA double totaliser tracks a batch total and a lifetime total, and the two do different jobs. The batch figure is what you read off for the fill in front of you. The lifetime figure is what supports stock reconciliation and usage tracking when it is time to account for what has gone out. Setup stays quick with a ready-to-use meter, easy calibration, an electronic reset, and an adjustable UMA camshaft for repeatable control.\u003c\/p\u003e\n\u003cp\u003eThe build is specified for real service bays. IP65 sealing and a rubber over-mould handle dust and drips, the flexible outlet reaches into tight engine bays without spilling down the side of the fill point, and a 360 degree swivel takes the twist out of the hose to cut wrist fatigue over a shift. The grip is shaped for one-handed work, so an operator can steady the machine with one hand and dose with the other. Inside, A-FLO uses aluminium for the meter and nozzle bodies for strength without bulk, NBR, nickel-plated steel and brass in the valve for chemical resistance, and technopolymer gears for metering accuracy and low wear. It runs on 2 x AAA batteries, included, with low consumption, so there is no power supply to route out to the gun.\u003c\/p\u003e\n\u003cp\u003eIt handles oils up to 2000 cSt, which covers everything from light engine oils through to heavier gear oils, making it a fit for passenger, heavy vehicle, agricultural and mining service bays. It is an oil dispensing gun and is not intended for grease or water-based fluids.\u003c\/p\u003e\n\u003cp\u003eThe gun connects to an oil hose reel or hose to complete a dispensing point, so it pairs naturally with a fixed oil reel on the supply side. Batteries are included and it calibrates in minutes, so it is ready to fit and verify on the day it arrives.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482206134351,"sku":"AF-FP-984330","price":527.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fp-984330-digital-metered-oil-control-gun.webp?v=1785301264"},{"product_id":"8430-401","title":"8430.401 Fixed Hose Reel, 430 Series, 10m 1\/2\" Black Rubber Hose, 150 bar","description":"\u003cp\u003eTen metres of oil hose left across a bay is a trip hazard and a hose that gets stood on and worn, and a reel that will not rewind cleanly is no better. The RAASM 8430.401 keeps a 1\/2in oil line managed for a compact workshop point, a 430 Series spring-rewind reel with 10 m of hose.\u003c\/p\u003e\n\u003cp\u003eThe reel runs an open spring-rewind mechanism on a painted steel reel and frame, fitted with 10 m of 1\/2in black rubber hose and an automatic stopping system that holds the hose where you leave it. At 10 m it suits shorter runs where a compact, tidy dispensing point matters more than long reach.\u003c\/p\u003e\n\u003cp\u003eWhat decides whether a reel lasts is the swivel and the seals. This one uses a zinc-plated steel swivel joint and polyurethane seals specified for oils, which is what keeps a petroleum-oil reel sealing where generic seals weep early. It is rated to 150 bar (15,000 kPa \/ 2,176 psi) maximum working pressure, well above typical workshop oil distribution.\u003c\/p\u003e\n\u003cp\u003eIt is rated for oils and similar products including fresh oils and antifreeze, and is not for fuels, DEF or water-based fluids. The inlet is G 1\/2in (female) BSP and the outlet G 1\/2in (male) BSP, so it connects to Australian workshop plumbing without an adapter, and a 0.6 m leader hose is included.\u003c\/p\u003e\n\u003cp\u003eIt is supplied with the 10 m hose but without a dispensing gun, so an oil control gun such as the RAASM 37751 or a metered gun is needed to finish the point. For longer reach in the same 1\/2in class, the 8430.402 carries 15 m.\u003c\/p\u003e","brand":"RAASM","offers":[{"title":"Default Title","offer_id":45482651877455,"sku":"8430.401","price":1080.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/raasm-8430-401-fixed-hose-reel-430-series-10m.webp?v=1785301326"},{"product_id":"8430-402","title":"8430.402 Fixed Hose Reel, 430 Series, 15m 1\/2\" Black Rubber Hose, 150 bar","description":"\u003cp\u003eFifteen metres of managed hose is the reach that covers a full bay from one fixed point, without a line trailing across the floor. The RAASM 8430.402 is the longer-hose 430 Series reel, carrying 15 m of 1\/2in oil hose on a spring rewind.\u003c\/p\u003e\n\u003cp\u003eIt runs an open spring-rewind mechanism on a painted steel reel and frame, and the extra 5 m over the 10 m version is the difference between a reel that reaches the machine and one you keep repositioning around. It is the maximum hose length in the 1\/2in 430 Series.\u003c\/p\u003e\n\u003cp\u003eDurability comes down to the swivel and seals: a zinc-plated steel swivel joint and polyurethane seals specified for oils, which hold up to petroleum oil where generic seals weep early. It is rated to 150 bar (15,000 kPa \/ 2,176 psi) maximum working pressure, well above typical workshop oil distribution, so the reel is not the limiting part of the line.\u003c\/p\u003e\n\u003cp\u003eIt is rated for oils and similar products including fresh oils and antifreeze, and is not for fuels, DEF or water-based fluids. The inlet is G 1\/2in (female) BSP and the outlet G 1\/2in (male) BSP, connecting to Australian plumbing without an adapter.\u003c\/p\u003e\n\u003cp\u003eIt comes fitted with the 15 m hose but without a dispensing gun, so an oil control gun such as the RAASM 37751 or a metered gun completes the point. Where runs are longer than 15 m, the 530 Series carries 20 m and 25 m of 1\/2in hose.\u003c\/p\u003e","brand":"RAASM","offers":[{"title":"Default Title","offer_id":45482673209423,"sku":"8430.402","price":1225.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/raasm-8430-402-fixed-hose-reel-430-series-15m.webp?v=1785301328"},{"product_id":"af-uf-ff25-1","title":"AF-UF-FF25-1 Fuel Filter Assembly, 1\" BSP Ports, 10um Filter Element, Translucent Bowl \u0026 Drain, up to 95 lpm","description":"\u003cp\u003eOn bulk diesel, the contamination you cannot see is what sends injectors and pumps back for repair. The AF-UF-FF25-1 catches it first, a 1in fuel filter assembly with a 10 micron element that cleans diesel before it reaches the nozzle or the machine.\u003c\/p\u003e\n\u003cp\u003eIt is built for real transfer setups and suits gravity feed, hand pumps, air-operated or electric pump systems, which makes it a fit for farm fuel tanks, bulk transfer systems and workshop dispensing points. The 10 micron element traps the particulate that does the damage, and the assembly flows up to 95 lpm so it filters without choking a mid to high-flow transfer line.\u003c\/p\u003e\n\u003cp\u003eThe head is aluminium with 1in BSP inlet and outlet. Australian transfer plumbing is typically BSP, so it plumbs into common transfer hardware without an adapter and with minimal restriction through the head. A translucent polypropylene bowl lets you see what the filter is catching, so you spot sediment and water early rather than after it reaches the pump, and the bowl is replaceable and drains through a simple turn-and-release cock, so servicing is a bowl and element change rather than a whole-unit swap.\u003c\/p\u003e\n\u003cp\u003eIt is rated to a maximum working pressure of 10 bar (1,000 kPa \/ 145 psi), which covers demanding transfer conditions rather than only gentle gravity feed. An optional water-block element and seal kit is available for operators who want an added layer of water management on top of particulate filtration.\u003c\/p\u003e\n\u003cp\u003eIt is a diesel fuel filter assembly and carries a 2 year warranty. It filters fuel in a transfer line and is not a substitute for an engine's own fuel filter.\u003c\/p\u003e\n\u003cp\u003eServicing is deliberately simple and cheap. Because the bowl and element are replaceable, a filter change is a few minutes and the cost of an element, not a new assembly, which is what keeps operators actually changing them on schedule rather than running them past their useful life. The translucent bowl makes that call obvious, since you can see when it is time.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you plumb it into the transfer line between the tank and the dispensing point using its 1in BSP ports, with the flow direction matched to the head. Fit it upstream of the nozzle so fuel is filtered at the point of dispense, and keep the replacement element and seal kit on hand so a service does not stop the line for long.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482854121551,"sku":"AF-UF-FF25-1","price":131.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/a-flo-af-uf-ff25-1-fuel-filter-assembly.webp?v=1793486631"},{"product_id":"af-ap-1321","title":"AF-AP-1321 Heavy Duty 205L Rotary Barrel Drum Pump, Solid Aluminium","description":"\u003cp\u003eDispensing oil or fuel out of a 205 L drum with a slow, sloppy pump wastes product and time, and on many sites there is no power to run anything better. The AF-AP-1321 is the simple answer, a manual rotary barrel pump in solid aluminium that moves fluid from a standard drum without power or air.\u003c\/p\u003e\n\u003cp\u003eThe rotary action gives controlled, consistent flow instead of the surging you get from a bargain pump, and at roughly 3 revolutions per litre you can move fluid at a practical pace while keeping it tidy and predictable. Solid aluminium construction is what lets it take daily handling in sheds, workshops, service trucks and on farms rather than being treated as a throwaway.\u003c\/p\u003e\n\u003cp\u003eIt handles a useful spread of common workshop fluids including diesel, petrol and motor oils, which makes it a single dependable drum pump for a mixed fleet rather than a different pump for each fluid. Because it moves petrol as well as diesel and oil, keep it dedicated and labelled to the fluid you run to avoid cross-contamination between fuels and oils.\u003c\/p\u003e\n\u003cp\u003eIt fits a standard 205 L drum through a 2in bung adapter and reaches the base with a 3-piece steel suction pipe that breaks down for storage and transport. The three-piece pipe is the practical detail that lets one pump suit different drum depths and still pack away, rather than being a fixed length that only suits one drum.\u003c\/p\u003e\n\u003cp\u003eTo seal the joins and stop weeping at the threads, the assembly is best fitted with Teflon tape on the joins, a small step that keeps the floor clean and the flow consistent. It is a manual transfer pump for drums and is not a metered dispenser, so pair it with a meter or nozzle if you need to measure what you draw.\u003c\/p\u003e\n\u003cp\u003eFor sites without power or air, a hand rotary pump is often the only practical way to get fluid out of a drum, and the rotary action is what makes that manual effort steady rather than the stop-start of a lever pump. Turned at a comfortable pace it delivers a usable flow without wearing you out, which is what a no-power drum pump has to do to earn a place in the shed.\u003c\/p\u003e\n\u003cp\u003eIt suits operators who want one no-power drum pump for diesel, petrol and oils across mixed equipment. For a faster or metered setup on a fixed drum, an air or electric pump with a metered gun is the step up where you need measured, higher-volume dispensing instead of portability.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482860576847,"sku":"AF-AP-1321","price":127.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1321-heavy-duty-205l-rotary-barrel-drum-pump.webp?v=1785301355"},{"product_id":"alfo-af-ap-1320-manual-drum-pump","title":"AF-AP-1320 Premium 60L \u0026 205L Hi-Flow Rotary Drum Pump, 100 lpm","description":"\u003cp\u003eA hand drum pump that tops out at a trickle is fine for the odd litre and useless when you are filling several machines off one drum. At up to 100 lpm, the AF-AP-1320 is the hi-flow rotary pump for drum-to-tank transfers that need to move quickly without power or site electrics.\u003c\/p\u003e\n\u003cp\u003eA premium rotary mechanism paired with a solid aluminium body delivers that flow while keeping the pump light enough to handle on a farm or a workshop bench. Where a standard rotary pump meters a slow litre, this one clears bulk volume, which is the difference when you are refuelling a run of machines or topping a bulk tank and slow transfer is the bottleneck.\u003c\/p\u003e\n\u003cp\u003eCompatibility is broad for common fuels and light oils. It is listed for diesel, unleaded and leaded petrol, and kerosene, and for oils up to SAE30, which covers most farm and light-industrial transfer tasks. For heavier gear oils above SAE30 it is out of range, so keep it to fuels and lighter oils.\u003c\/p\u003e\n\u003cp\u003eIt arrives ready to run. A steel suction pipe with a foot strainer keeps debris out of the line at the drum, a 2in bung adapter mates it to standard drum bungs, and a 2.4 m delivery hose with a metal nozzle and holster gives you controlled dispensing and a home for the nozzle that cuts drips between jobs.\u003c\/p\u003e\n\u003cp\u003eThe foot strainer is the quiet detail that protects the machine you are filling, screening grit at the pickup before it reaches the tank rather than after. On mixed fuels and oils across a fleet, that is cheap insurance against carrying drum sediment into equipment.\u003c\/p\u003e\n\u003cp\u003eBecause it is hand-cranked rather than powered, there is nothing to plug in, charge or service beyond the seals, which keeps a high-flow pump usable on a paddock or a remote tank where a powered unit would sit idle for want of a supply. The metal nozzle and holster round it out as a tidy, self-contained transfer kit.\u003c\/p\u003e\n\u003cp\u003eIt fits both 60 L and 205 L drums, so one pump covers the common drum sizes on site. For engine oil and diesel only, the lower-cost cast iron AF-AP-2220 or aluminium AF-AP-1321 handle those without the higher flow, so step up to the 1320 when transfer speed and the wider fuel list are what you need.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482876829775,"sku":"AF-AP-1320","price":505.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1320-60l-205l-hi-flow-rotary-drum-pump.webp?v=1785301354"},{"product_id":"af-fp-101320","title":"AF-FP-101320 Pro 240V AdBlue Transfer Kit for IBC, Auto Nozzle \u0026 Digital Flow Meter","description":"\u003cp\u003eDispensing AdBlue from a 1000 L IBC with a make-do setup is slow, messy and impossible to track. The Bluequip AF-FP-101320 Pro kit turns that into a proper metered dispensing point, built around a self-priming 240V pump on a stainless-steel IBC bracket.\u003c\/p\u003e\n\u003cp\u003eThe pump is a self-priming 240V unit rated at 35 lpm, mounted on a stainless-steel IBC bracket that holds the whole setup stable and supported rather than hanging off zip ties and bent brackets. A bottom suction kit draws the IBC down reliably, which keeps flow consistent and avoids the mid-fill stalls a poor pickup causes.\u003c\/p\u003e\n\u003cp\u003eWhat makes it the Pro kit is control. An automatic shut-off nozzle helps prevent overfills, and a K24 digital flow meter shows exactly what goes into each tank, which turns AdBlue from a vague consumable into a measured input you can track for cost, jobs and waste. It ships with a 6 m by 3\/4in hose, long enough to reach from the IBC to most fill points without dragging the unit around.\u003c\/p\u003e\n\u003cp\u003eFluid rated for AdBlue\/DEF. It is built for SCR-equipped fleets, farm machinery and multi-asset sites dispensing AdBlue, and its stainless bracket and AdBlue-compatible path keep the setup clean. It is an AdBlue kit and is not for diesel or oils.\u003c\/p\u003e\n\u003cp\u003eIt runs on 240V mains, so it is a fixed workshop or shed dispensing point rather than a vehicle-powered unit, and it mounts to a standard 1000 L IBC. Site it within reach of a 240V supply and position the IBC so the 6 m hose covers your fill points.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":45482913529935,"sku":"AF-FP-101320","price":2627.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-101320-pro-240v-adblue-transfer-kit-for-ibc.webp?v=1785301351"},{"product_id":"38022","title":"38022 Manual Oil Gun, Flexible Outlet, High-Flow non-Drip Nozzle, 40 lpm","description":"\u003cp\u003eFor everyday oil top-ups, a straightforward manual gun that pours cleanly and does not drip on the floor is all the job needs. The RAASM 38022 keeps everyday oil top-ups clean, a compact manual oil control gun for controlled, no-fuss dispensing.\u003c\/p\u003e\n\u003cp\u003eIt delivers up to 40 lpm at up to 70 bar (7,000 kPa \/ 1,015 psi), enough for routine top-ups and servicing across engine and gear oils, on an aluminium grip built for daily use. It is the lighter-flow manual gun in the range, sized for general workshop dispensing rather than high-output lines.\u003c\/p\u003e\n\u003cp\u003eA flexible outlet terminal reaches into tight or awkward angles, and a semi-automatic Ø16 mm drip-catcher nozzle keeps the spills down between fills. An integrated filter keeps contaminants out of the dispense, which protects the point you are filling as much as the gun.\u003c\/p\u003e\n\u003cp\u003eIt is a manual, non-metered oil gun for engine and gear oils. Where you need to measure and record what you dispense, a digital metered gun is the alternative.\u003c\/p\u003e\n\u003cp\u003eThe G 1\/2in female swivel inlet threads to standard Australian lube hose reels and plumbing without an adapter, and the swivel takes the twist out of the hose. Connect it to an oil hose reel or hose fed by a suitable pump to complete the point. For higher flow, the RAASM 37751 manual gun runs to 65 lpm.\u003c\/p\u003e","brand":"RAASM","offers":[{"title":"Default Title","offer_id":45482937679951,"sku":"38022","price":207.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/raasm-38022-manual-oil-gun.webp?v=1785301305"},{"product_id":"af-uf-gfp-20","title":"AF-UF-GFP-20 Hand Operated Bucket Grease Pump 20kg","description":"\u003cp\u003eRefilling grease guns from a cartridge or a scoop is where half the grease ends up on the bench and the other half traps air. The AF-UF-GFP-20 is a hand-operated bucket pump that loads bulk and combination grease guns straight from a 20 kg bucket, cleanly and under control.\u003c\/p\u003e\n\u003cp\u003eThe pump's real work is done by the universal follower plate. It rides on the grease surface as you pump, keeping the feed consistent and stopping the air pockets that cause false fills, the ones where a gun feels full but delivers air at the fitting. That means a gun that is actually charged when you take it to the machine, not one that spits and stalls at the first zerk.\u003c\/p\u003e\n\u003cp\u003eBeing hand-operated, it needs no power or air, which makes it the tool for mobile service setups, farm sheds and remote machinery work where a compressor is not on hand. You stay in control of the fill, so there is less over-pressurising, less mess, and a steadier routine when you are charging guns for plant, ag gear, trucks and trailers.\u003c\/p\u003e\n\u003cp\u003eIt is a manual grease-filling solution rather than a dispensing pump, so it loads guns rather than greasing fittings directly. It handles bucket grease and is not a transfer pump for oils or fluids.\u003c\/p\u003e\n\u003cp\u003eThe robust build is the point on a tool handled roughly and often, dropped onto buckets and shifted between utes and sheds. A pump that holds up to that is one you fill guns with for years rather than replacing after a season of hard use.\u003c\/p\u003e\n\u003cp\u003eTo put it to work you drop it onto a standard 20 kg grease bucket and pump to load your guns. Where you want to grease fittings directly off the bucket instead of loading guns, a pneumatic bucket pump kit is the setup to look at, so match the tool to whether you are filling guns or dispensing.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45482945740879,"sku":"AF-UF-GFP-20","price":198.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-uf-gfp-20-hand-operated-bucket-grease-pump-20kg.webp?v=1785301373"},{"product_id":"af-fg-205","title":"AF-FG-205 205L Drum Level Gauge","description":"\u003cp\u003eTilting a 205 L drum to guess what is left is how a job stalls halfway through for want of oil nobody checked. The AF-FG-205 drum level gauge reads the contents at a glance without opening the drum, so a refill is planned rather than discovered mid-service.\u003c\/p\u003e\n\u003cp\u003eIt is a float-style visual level indicator that screws directly into the 2 in BSP drum bung, which makes it compatible with most standard 205 L oil and lubricant drums. Once fitted, the float rides on the fluid surface and gives a consistent reading as the drum empties, so you see the level the same way every time rather than dipping or estimating.\u003c\/p\u003e\n\u003cp\u003eKeeping the drum closed is more than convenience. Every time a drum is opened to check it, dust and moisture get a chance to enter, and on modern engines and hydraulic systems clean oil is what protects the components, so a gauge that reads without opening helps keep the oil clean as well as the inventory visible.\u003c\/p\u003e\n\u003cp\u003eIt is built from durable, oil-resistant materials for daily workshop use, standing up to oil exposure and temperature swings on engine oil, hydraulic oil, gear oil and other lubricants. For a workshop, farm or fleet running several drums at once, it turns fluid stock from guesswork into something you can plan maintenance and reordering around.\u003c\/p\u003e\n\u003cp\u003eTo fit it you simply thread it into the 2 in BSP bung of a standard 205 L drum. It reads oils and lubricants and is a level gauge rather than a dispenser, so pair it with a drum or barrel pump to draw fluid from the same drum.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":45483270471759,"sku":"AF-FG-205","price":105.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-fg-205-205l-drum-level-gauge.webp?v=1785301440"},{"product_id":"5l-jug-with-stretch-spout-lid","title":"AF-LS_1005SC 5L Jug with 12mm Stretch Spout Lid","description":"\u003cp\u003eThe 5 litre LUBESMART jug with a 12 mm Stretch Spout lid is built for fill points that sit behind guards, hoses and brackets. The extended spout does the reaching, so the oil goes in, not over the engine.\u003c\/p\u003e\n\u003cp\u003eEvery LUBESMART lid fits every LUBESMART jug, so you can standardise containers across the workshop and change spouts as jobs change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduated jug.\u003c\/strong\u003e The 5 L transparent HDPE jug is marked from 0.5 L in 0.25 L steps, so you can see the level and measure the pour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 mm (1\/2\") outlet on an extended spout.\u003c\/strong\u003e Reaches fill points behind guards and brackets and gives a controlled pour of lower-viscosity oils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto shut-off breather valve.\u003c\/strong\u003e Helps prevent accidental spills and keeps contaminants out while you dispense.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure fit.\u003c\/strong\u003e An advanced sealing thread locks the lid onto the jug, and the large handle makes it easy to carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-tough lid.\u003c\/strong\u003e Made from chemical-resistant materials that will not warp, leak, bend or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded.\u003c\/strong\u003e Stocked in black, green and grey. Give each oil its own colour to stop cross-contamination and operator mix-ups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide mouth.\u003c\/strong\u003e The 120 mm opening makes the jug quick to fill and easy to clean, and every LUBESMART lid fits it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor oils and lubricants only. LUBESMART jugs are not suitable for fuels or solvents.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Black","offer_id":67619000975439,"sku":"AF-LS-1005SC-BK","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67619001008207,"sku":"AF-LS-1005SC-GR","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Grey","offer_id":67619001040975,"sku":"AF-LS-1005SC-GY","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Light Blue","offer_id":67619001073743,"sku":"AF-LS-1005SC-LB","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":67619001106511,"sku":"AF-LS-1005SC-OR","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Pink","offer_id":67619001139279,"sku":"AF-LS-1005SC-PK","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":67619001172047,"sku":"AF-LS-1005SC-RD","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":67619001204815,"sku":"AF-LS-1005SC-WH","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":67619001237583,"sku":"AF-LS-1005SC-YL","price":98.0,"currency_code":"AUD","in_stock":true},{"title":"Dark Blue","offer_id":67619001270351,"sku":"AF-LS-1005SC-DB","price":98.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/lubesmart-af-ls-1005sc-db-5l-jug-with-dark-blue-stretch-spout-lid.webp?v=1791082247"},{"product_id":"af-ap-1316","title":"AF-AP-1316 Standard 60L \u0026 205L Lever Action Oil Pump, Aluminium, Telescopic Suction","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Supplied as an oil transfer pump. A-FLO does not rate it for petrol, DEF\/AdBlue, solvents or water-based fluids, so do not use it for those fluids. The drum must have a 2\" bung to accept the pump.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot every drum needs compressed air behind it. Where oil comes out of a 60L or 205L drum a few litres at a time, on a site with no air line and no power, a lever action hand pump does the transfer with nothing to plug in.\u003c\/p\u003e\n\u003cp\u003ePouring from a tipped drum wastes oil and puts contamination into whatever is being filled. The AF-AP-1316 threads into the drum's 2\" bung and draws oil up through a telescopic suction pipe that adjusts to reach the bottom of either a 60L or a 205L drum. Delivery is roughly three strokes of the lever per litre, and the aluminium construction keeps the pump to 3 kg, so it moves easily from one drum to the next.\u003c\/p\u003e\n\u003cp\u003eThree strokes per litre suits top-ups and smaller fills, such as an engine oil top-up or a gearbox fill. For refilling large sumps repeatedly through a shift, a rotary or pneumatic pump moves oil faster. A-FLO positions it as the lower-cost alternative to an air-operated pump, most useful where no power supply is available.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: oil, as specified by A-FLO. A maximum viscosity is not published. Connection: 2\" drum bung thread. A-FLO does not state the thread standard, so check the bung on your drums before ordering. No certification is cited for this manual pump.\u003c\/p\u003e\n\u003cp\u003eThe pump fits straight into the drum bung with no air supply, power or plumbing required. Oil discharges through the curved spout on the pump head. The drum is not included, and A-FLO covers the pump with a 2 year warranty. If the drum needs to travel to the equipment, a drum trolley completes the setup.\u003c\/p\u003e\n\u003cp\u003eFor higher volumes from the same drum, the AF-AP-1320 Premium Hi-Flow Rotary Drum Pump is rated at 100 lpm and fits 60L and 205L drums. To move a 205L drum to the machine, the AF-AP-1305 3 wheel drum trolley carries one drum on solid rubber tyres with a braked castor.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":67698571771983,"sku":"AF-AP-1316","price":82.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ap-1316-lever-action-oil-pump.png?v=1792018440"},{"product_id":"af-sgs-450","title":"AF-SGS-450 Speedy 450g Grease Gun, 800 bar, 2.5cc per Stroke, 800mm Flexible Hose","description":"\u003cp\u003eOn a machine with dozens of grease points, the volume each stroke delivers decides how many strokes the whole service takes, and every one of them is done by hand. Across a full machine service, that count shows up as time on the job and as operator fatigue. At 2.5cc per stroke, the Speedy keeps the count down.\u003c\/p\u003e\n\u003cp\u003eThe outcome is volume and pressure in the same gun: 2.5cc per stroke at up to 800 bar, which leaves pressure in reserve for stiff or partly blocked nipples. The lever-operated pumping mechanism is a patented design built for Australian workshops. A 60 kg rated magnet lets the gun sit on a steel frame, boom or service body between points instead of on the ground, and the 800mm flexible hose with coupler reaches nipples behind guards and linkages.\u003c\/p\u003e\n\u003cp\u003eIt suits workshop machinery servicing where one operator works through many grease points per machine and the gun is set down between nipples. The 450g model carries the larger grease charge of the Speedy range.\u003c\/p\u003e\n\u003cp\u003eRated for grease. Maximum operating pressure is 800 bar. A-FLO does not publish the hose outlet thread or the type of coupler supplied, so confirm the thread before fitting a replacement coupler or extension. No certification is cited.\u003c\/p\u003e\n\u003cp\u003eThe gun is supplied with the 800mm flexible hose and a grease coupler fitted. Grease is not included, and A-FLO does not state whether the gun loads by cartridge, bulk or suction fill, so confirm the loading method against the grease supply you use before ordering.\u003c\/p\u003e\n\u003cp\u003eFor a coupler that releases from the nipple in one click, the AF-UC-2020 Quick Release Grease Coupler with relief valve is rated to approximately 1,034 bar, above this gun's 800 bar, and is available in 1\/8\" BSP or 1\/8\" NPT. Match the coupler thread to the gun's hose before ordering.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":67698571935823,"sku":"AF-SGS-450","price":168.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-sgs-450-grease-gun.png?v=1792018440"},{"product_id":"af-uc-2020","title":"AF-UC-2020 Quick Release Grease Coupler with Relief Valve, 1\/8\" BSP or NPT","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Thread is 1\/8\" female, available in BSP or NPT. The two standards do not interchange, so match the variant to the male thread on your grease gun's hose or extension.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA coupler that locks onto the nipple stops the service. Trapped pressure behind a seized coupler means levering it off by hand, losing grease and risking the nipple, and on a machine with dozens of points it can happen more than once.\u003c\/p\u003e\n\u003cp\u003eThe coupler grips the nipple without a lever and releases from it in one click. Its built-in relief valve lets trapped pressure escape, which is what stops the coupler locking onto the nipple. The manufacturer rates it to 15,000 psi, approximately 1,034 bar, and states no leakage at the nipple.\u003c\/p\u003e\n\u003cp\u003eIt grips any size of grease nipple, and the relief valve is the reason to choose this version: stiff or partly blocked points that are slow to take grease are where a standard coupler is most likely to lock on. With both hands free for the gun, it suits workshop and machinery servicing where one gun works across many fittings.\u003c\/p\u003e\n\u003cp\u003eRated for grease. Connection: 1\/8\" female thread, in BSP (British Standard Pipe) or NPT (National Pipe Thread). Most Australian-market grease guns and hose extensions use 1\/8\" BSP, so choose the BSP variant unless your gun is confirmed as NPT; fitting the wrong standard will not seal and can damage the thread. No certification is cited for this coupler.\u003c\/p\u003e\n\u003cp\u003eThe coupler threads straight onto the 1\/8\" male outlet of a grease gun hose or rigid extension in the matching standard. It is sold as the coupler only; the grease gun, hose and extension are separate. A-FLO backs the coupler with a lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eWhere nipples are clean and free-flowing, the AF-UC-2121 Quick Release Grease Coupler gives the same lever-free grip and one-click release without the relief valve, in BSP and NPT. For a gun to pair with it, the AF-SGS-450 Speedy 450g grease gun delivers 2.5cc per stroke at up to 800 bar, inside this coupler's rating.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"1\/8\" BSP (female)","offer_id":67698575769679,"sku":"AF-UC-2020","price":92.0,"currency_code":"AUD","in_stock":true},{"title":"1\/8\" NPT (female)","offer_id":67698575802447,"sku":"AF-UC-2020-NPT","price":92.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-uc-2020-quick-release-grease-coupler-relief-valve-angle-view.png?v=1792020781"},{"product_id":"af-uc-2121","title":"AF-UC-2121 Quick Release Grease Coupler, 1\/8\" BSP or NPT","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Thread is 1\/8\" female, available in BSP or NPT, and the two standards do not interchange. This version has no relief valve; for stiff or partly blocked nipples, use the AF-UC-2020 relief valve version.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo lever to hold, no second hand on the coupler, no wrestling it off the nipple. The quick release coupler grips the nipple on contact and lets go in one click, so the operator keeps both hands on the grease gun for the whole stroke.\u003c\/p\u003e\n\u003cp\u003eThe outcome is a faster move from one nipple to the next across a full machine service. The coupler grips without a lever and releases with one click, and the manufacturer rates it to 15,000 psi, approximately 1,034 bar, with no leakage at the nipple.\u003c\/p\u003e\n\u003cp\u003eIt grips any size of grease nipple and suits clean, free-flowing points in workshop and machinery servicing, where one gun works across many fittings. Without the relief valve it is the lower-cost option when equipping several guns.\u003c\/p\u003e\n\u003cp\u003eRated for grease. Connection: 1\/8\" female thread, in BSP (British Standard Pipe) or NPT (National Pipe Thread). Most Australian-market grease guns and hose extensions use 1\/8\" BSP, so choose the BSP variant unless your gun is confirmed as NPT; fitting the wrong standard will not seal and can damage the thread. No certification is cited for this coupler.\u003c\/p\u003e\n\u003cp\u003eThe coupler threads straight onto the 1\/8\" male outlet of a grease gun hose or rigid extension in the matching standard. It is sold as the coupler only; the grease gun, hose and extension are separate. A-FLO backs the coupler with a lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eFor stiff or partly blocked nipples, the AF-UC-2020 Quick Release Grease Coupler adds a built-in relief valve that stops the coupler locking on, in the same BSP and NPT threads. For a gun to pair with it, the AF-SGS-450 Speedy 450g grease gun delivers 2.5cc per stroke at up to 800 bar, inside this coupler's rating.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"1\/8\" BSP (female)","offer_id":67698576785487,"sku":"AF-UC-2121","price":86.0,"currency_code":"AUD","in_stock":true},{"title":"1\/8\" NPT (female)","offer_id":67698576818255,"sku":"AF-UC-2121-NPT","price":86.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-uc-2121-quick-release-grease-coupler-side-view.png?v=1792020782"},{"product_id":"af-lc-99-hph50m","title":"AF-LC-99-HPH50M 50m x 8.6mm High Pressure Grease Hose, Empty, 800 bar","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: A-FLO lists the hose as 8.6 mm but does not state whether this is the inside or outside diameter, and no end fittings are specified. Confirm the size against your auto lube system's fittings before cutting and installing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn auto lubrication system is only as dependable as the line between the pump and each lubrication point, and a run that swells, weeps or splits under pressure leaves a point running dry with nobody aware of it. This 8.6 mm hose carries a manufacturer rating of 11,600 psi, approximately 800 bar. That rating is the figure to check against your pump.\u003c\/p\u003e\n\u003cp\u003eThe hose comes as a continuous 50 m roll, so each line from the pump or distributor to a lubrication point is cut to length on installation rather than joined from short sections, and every joint left out is one fewer leak point under pressure. The approximately 800 bar rating applies to the hose itself; the working pressure of the finished line is limited by whichever component is rated lowest, including the fittings used to terminate each run.\u003c\/p\u003e\n\u003cp\u003eA-FLO lists it within its auto lubrication systems and fittings range, for running grease lines between an auto lube pump, distribution blocks and lubrication points. Supplied empty, it suits installers who prime lines during commissioning, or systems running a grease that should not be mixed with a pre-filled hose.\u003c\/p\u003e\n\u003cp\u003eRated for: grease. Connection: no end fittings are listed with the hose, and A-FLO does not say whether 8.6 mm is the inside or outside diameter, so match the fittings to the hose and to your system's BSP (British Standard Pipe) or NPT (National Pipe Thread) ports before ordering. No certification is cited.\u003c\/p\u003e\n\u003cp\u003eThe hose is supplied as a 50 m roll. End fittings, distribution blocks, the auto lube pump and grease are not included, and each line needs to be primed with grease before the system is relied on to deliver.\u003c\/p\u003e\n\u003cp\u003eWhere lines need to go into service without a priming run, the AF-LC-99-HPH50MGF is the same 50 m, 8.6 mm hose supplied pre-filled with grease.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":67699398836303,"sku":"AF-LC-99-HPH50M","price":350.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-lc-99-hph50m-high-pressure-grease-hose-empty.jpg?v=1792024525"},{"product_id":"af-uf-gh300","title":"Heavy Duty Flexible Grease Gun Extension, 300mm or 450mm, 400 bar","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Working pressure is approximately 400 bar (5,800 psi manufacturer rating), with a burst rating of approximately 948 bar. Some hand grease guns develop more than 400 bar, including the AF-UF-P450 (up to 552 bar) and AF-UF-L450 (up to 690 bar), so keep stroke pressure within the working rating on those guns. The end thread is not published; confirm it matches your gun before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBehind a guard, under a chassis rail, inside a linkage: the grease points a rigid outlet cannot line up on are the ones that get skipped. A flexible extension takes the coupler to the nipple while the gun stays where there is room to work it.\u003c\/p\u003e\n\u003cp\u003eA rigid outlet forces the gun to sit square to the nipple, and where that position is blocked the point is either missed or the coupler goes on at an angle and leaks. The ULTRAFLO extension is a flexible hose of German construction that fits to the gun's outlet and carries grease to the nipple at whatever angle the access allows. A-FLO rates it to approximately 400 bar working and 948 bar burst, in 300 mm and 450 mm lengths.\u003c\/p\u003e\n\u003cp\u003eA-FLO lists it as suitable for both hand-operated and air-operated grease equipment. The 300 mm length keeps the gun close to the point and easier to control where the nipple is only just out of line; the 450 mm length gives another 150 mm of reach for points set deep behind guards or across frames, with more hose to steer at the nipple.\u003c\/p\u003e\n\u003cp\u003eRated for grease. Connection: A-FLO does not publish the thread size, standard or gender at either end, or whether a coupler is fitted. Australian-market grease guns commonly use 1\/8\" BSP (British Standard Pipe), but confirm the thread on your gun before ordering, as an NPT (National Pipe Thread) gun will need a matching extension or an adapter. No certification is cited.\u003c\/p\u003e\n\u003cp\u003eThe 300 mm extension weighs 0.25 kg and the 450 mm weighs 0.32 kg. The grease gun is not included, and A-FLO does not state whether a coupler is supplied on the extension, so plan for a coupler if your gun's is not transferred across.\u003c\/p\u003e\n\u003cp\u003eOn the air-operated AF-AP-1161, which delivers up to 262 bar, the extension works within its 400 bar rating and adds reach to that gun's rigid outlet. If a coupler is needed, the AF-UC-2020 quick release coupler with relief valve threads onto a 1\/8\" male BSP or NPT outlet, once the extension's end thread is confirmed.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"300 mm","offer_id":67699407257679,"sku":"AF-UF-GH300","price":24.0,"currency_code":"AUD","in_stock":true},{"title":"450 mm","offer_id":67699494125647,"sku":"AF-UF-GH450","price":28.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-uf-gh300-flexible-grease-gun-extension.jpg?v=1792024586"},{"product_id":"af-lc-99-hph50mgf","title":"AF-LC-99-HPH50MGF 50m x 8.6mm High Pressure Grease Hose, Grease Filled, 800 bar","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Supplied pre-filled with grease. A-FLO does not state the grease type or NLGI grade used, so confirm it is compatible with the grease your system runs before installing, as incompatible greases can break down when mixed. The 8.6 mm size is listed without stating inside or outside diameter.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn empty grease line lubricates nothing. Until every metre between the pump and the lubrication point is full, the first cycles of an auto lube system go into filling the line instead of the bearing, and on a long run that delay can stretch across many cycles.\u003c\/p\u003e\n\u003cp\u003eThe outcome is a line that delivers from its first cycle. The 50 m roll comes filled with grease, so each run is cut, terminated and connected without a separate priming step, and the 8.6 mm hose carries a manufacturer rating of 11,600 psi, approximately 800 bar. The working pressure of the finished line is still limited by the lowest-rated fitting in it.\u003c\/p\u003e\n\u003cp\u003eA-FLO lists it within its auto lubrication systems and fittings range, for grease lines between an auto lube pump, distribution blocks and lubrication points. It suits new installations and line replacements where the machine needs to go back into service without a priming run.\u003c\/p\u003e\n\u003cp\u003eRated for: grease. The pre-fill grease type and grade are not published. Connection: no end fittings are listed with the hose, and A-FLO does not say whether 8.6 mm is the inside or outside diameter, so match the fittings to the hose and to your system's BSP (British Standard Pipe) or NPT (National Pipe Thread) ports before ordering. No certification is cited.\u003c\/p\u003e\n\u003cp\u003eThe hose is supplied as a 50 m roll. End fittings, distribution blocks, the auto lube pump and the system's grease supply are not included. Confirm the pre-fill grease against your system's grease before cutting into the roll.\u003c\/p\u003e\n\u003cp\u003eWhere your grease differs from the pre-fill, or lines will be primed during commissioning anyway, the AF-LC-99-HPH50M is the same hose supplied empty.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":67699614416975,"sku":"AF-LC-99-HPH50MGF","price":420.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-lc-99-hph50mgf-high-pressure-grease-hose-grease-filled.png?v=1792024484"},{"product_id":"af-fc-ad2500-240v","title":"AF-FC-AD2500 Polycube 2500L Self-Bunded AdBlue Tank with 240V Pump \u0026 8m Hose Reel","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Requires a 240V mains supply at the tank. The tank is set up for AdBlue only; storing or pumping diesel or any other fluid through it will contaminate the AdBlue and the vehicles it fills.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnce a site's AdBlue use outgrows 20L packs and drums, the next step is a bulk store that holds a delivery, contains a leak and dispenses straight into the vehicle. A self-bunded 2500L tank does all three from one footprint. That is what turns AdBlue from a stock problem into a fuelling-point routine.\u003c\/p\u003e\n\u003cp\u003eThe tank is self-bunded, so it sits inside a second containment wall that catches the contents if the inner tank fails, without a separate bund being built around it. A 240V pump rated at 40 lpm draws from the tank and feeds an 8m x 3\/4\" hose reel finished with an automatic shut-off nozzle, so the fill stops when the vehicle tank is full. A breather system prevents pressure building in the tank, and the dispensing equipment is lockable to control who draws from it.\u003c\/p\u003e\n\u003cp\u003eMeasuring 2,330 × 1,680 × 1,300 mm and 400 kg empty, it is a fixed-site bulk store for refuelling a fleet's AdBlue from one location rather than from packs or drums moved around the site. It shares its footprint with the AF-FC-DD2500 self-bunded diesel tank, so the two can stand side by side as a matched fuelling point.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, petrol, oils or water. Power: 240V pump, supplied with a 4 m cable. A-FLO does not cite AS 1940 or another storage standard for the AdBlue tank, so confirm the self-bunded design meets your site's storage requirements.\u003c\/p\u003e\n\u003cp\u003eThe tank arrives with the pump, hose reel and automatic nozzle fitted. You need a 240V supply within reach of the tank's cable, and firm, level ground that will carry the filled weight, positioned so the 8m reel reaches the vehicles you fill. A-FLO covers all equipment components with a 1 year warranty, excluding general wear and tear.\u003c\/p\u003e\n\u003cp\u003eFor sites storing diesel as well, the AF-FC-DD2500 2500L self-bunded diesel tank matches this tank's dimensions and 240V setup. Where AdBlue use needs to be recorded per vehicle, the PIUSI K24 F0040710A digital flow meter is rated for AdBlue; confirm the pump outlet thread against the meter's 1\" BSP ports before ordering.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Default Title","offer_id":67699723927631,"sku":"AF-FC-AD2500 240V","price":8336.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/a-flo-af-fc-ad2500-240v-polycube-2500l-self-bunded-adblue-tank.png?v=1794951501"},{"product_id":"af-fp-3322a50","title":"AF-FP-3322A50 Bluequip Heavy Duty Stainless Steel AdBlue Hand Pump Kit, 38 lpm","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Dedicated to AdBlue (DEF). Using the pump for diesel, oil or other fluids will contaminate any AdBlue it pumps afterwards. A-FLO does not publish the drum bung thread, so confirm it suits your container before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e38 lpm, by hand, in stainless steel. That combination puts this pump between a slow plastic drum pump and a powered transfer kit: fast enough to fill a truck's AdBlue tank without a long wait, with no power supply or air line needed at the drum.\u003c\/p\u003e\n\u003cp\u003eThe outcome is a pump that primes itself and dispenses immediately, at up to 38 lpm. Its stainless steel build uses materials A-FLO states are fully compatible with AdBlue, and its close manufacturing tolerances and wear-resistant materials are what A-FLO relies on for long service in daily use. The pump is made in Italy.\u003c\/p\u003e\n\u003cp\u003eIt suits sites dispensing AdBlue from drums where volumes justify a faster, longer-lived pump than a polypropylene hand pump, but not yet a 240V system.\u003c\/p\u003e\n\u003cp\u003eFluid rated for: AdBlue (DEF). Not for diesel, oils or other fluids. Connection: the drum bung thread and adaptor standard are not published, so check your drum's bung before ordering. No standard such as ISO 22241 is cited for the pump.\u003c\/p\u003e\n\u003cp\u003eThe kit is supplied complete with a suction tube, delivery hose and nozzle, ready to fit to the drum. The drum and AdBlue are not included, and no power or air supply is required.\u003c\/p\u003e\n\u003cp\u003eFor one- or two-vehicle operations where cost matters more than flow, the AF-FP-332080 Bluequip rotary drum pump kit is the polypropylene alternative. Where AdBlue comes in 1000L IBCs, the AF-FP-101320 Pro 240V AdBlue transfer kit adds an automatic nozzle and digital flow meter.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67699730972751,"sku":"AF-FP-3322A50","price":497.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-3322a50-adblue-hand-pump-kit-drum-view.png?v=1792020782"},{"product_id":"af-fp-332080","title":"AF-FP-332080 Bluequip Rotary Action Barrel Pump Kit, Adjustable Drum Adaptor, 2m Hose","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Keep the pump dedicated to AdBlue (DEF), as any diesel or oil left in it will contaminate the AdBlue. A-FLO describes the polypropylene pump as resistant to various industrial-grade fluids but does not publish a specific AdBlue compatibility statement or flow rate.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne or two vehicles, one drum, a few litres at a time: at that scale, AdBlue dispensing needs a clean, sealed transfer into the vehicle tank rather than a powered system. A rotary hand pump does the job with no power, no air and nothing to maintain beyond the pump itself.\u003c\/p\u003e\n\u003cp\u003ePouring AdBlue from an open drum or using a pump that has seen diesel puts contamination straight into the SCR system. This kit seals into the drum through its adjustable drum adaptor, which suits most drums, and transfers by turning the rotary handle, through a 2 m delivery hose to a stainless steel spout. The pump body is heavy duty polypropylene.\u003c\/p\u003e\n\u003cp\u003eA-FLO positions the kit for smaller operations running one or two vehicles and drawing AdBlue from 205L drums, where a powered system would sit idle most of the week.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with the rotary pump, 2 m delivery hose, stainless steel spout and an adjustable drum adaptor to suit most drums. The drum and AdBlue are not included, and no power or air supply is required.\u003c\/p\u003e\n\u003cp\u003eWhere daily volumes outgrow a polypropylene pump, the \u003ca href=\"\/products\/af-fp-3322a50\"\u003eAF-FP-3322A50\u003c\/a\u003e Bluequip stainless steel hand pump delivers up to 38 lpm and is made in Italy. For IBC supply, the \u003ca href=\"\/products\/af-fp-101320\"\u003eAF-FP-101320\u003c\/a\u003e Pro 240V AdBlue transfer kit adds an automatic nozzle and digital flow meter.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67699733561423,"sku":"AF-FP-332080","price":344.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-fp-332080-rotary-barrel-pump-kit-drum-view.png?v=1792020782"},{"product_id":"af-ae-ibccover","title":"AF-AE-IBCCOVER Bluequip 1000L IBC Cover for AdBlue IBCs","description":"\u003cp\u003e\u003cstrong\u003eCompatibility note: Sized for 1000L IBCs. A-FLO does not publish the cover's fitted dimensions or material, so confirm your IBC is a standard 1000L cage before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn AdBlue IBC left in the sun or riding on an open truck sees heat and moisture swings that the fluid inside does not handle well, and the problem only shows up later as AdBlue that is off-specification. Covering the IBC is the simplest control a site can put on its stock. A fitted cover does it without changing how the IBC is used.\u003c\/p\u003e\n\u003cp\u003eUncovered IBCs take direct sunlight and the temperature changes that come with it, in storage and in transit. The Bluequip cover fits over a 1000L IBC and seals at its edge, which keeps the space inside more stable against changing outside conditions and reduces the effect of direct sunlight on the AdBlue. It goes on and comes off easily whenever the IBC needs to be accessed or moved.\u003c\/p\u003e\n\u003cp\u003eIt suits AdBlue IBCs stored where they take direct sun, and IBCs carried between sites. A 240V electric pump kit can still be mounted on the side of the IBC with the cover in place, so a dispensing setup does not need to be removed to fit it.\u003c\/p\u003e\n\u003cp\u003eFor AdBlue (DEF) IBCs. The cover has no fluid connections and does not touch the AdBlue. No material specification, UV rating or certification is published.\u003c\/p\u003e\n\u003cp\u003eThe cover is supplied on its own at 2 kg; the IBC and any pump kit are not included. Fit it to the IBC cage and leave the side clear if a pump kit is mounted there.\u003c\/p\u003e\n\u003cp\u003eTo dispense from the covered IBC, the AF-FP-101320 Pro 240V AdBlue transfer kit mounts on the side of the IBC and adds an automatic nozzle and digital flow meter.\u003c\/p\u003e","brand":"Bluequip","offers":[{"title":"Default Title","offer_id":67699735658575,"sku":"AF-AE-IBCCOVER","price":156.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/bluequip-af-ae-ibccover-ibc-cover.png?v=1792018440"},{"product_id":"ultraflo-1l-multi-purpose-oil-bottle","title":"1L Multi-Purpose Oil Bottle with Pourer and Cap, Red, Black or Green","description":"\u003cp\u003eThe Ultraflo 1L multi-purpose oil bottle is a reusable bottle for dispensing oil in workshops and on-site servicing, supplied with a pourer and cap. Choose the pourer and cap colour: red (AF-OB-1000-RED), black (AF-OB-1000-BLK) or green (AF-OB-1000-GRE). For bigger top-ups, the \u003ca href=\"\/products\/measuring-bottle-flexible-outlet\"\u003emeasuring bottle with flexible outlet\u003c\/a\u003e comes in 2L, 3L and 5L.\u003c\/p\u003e\u003cp\u003eThe bottle is made from a non-breakable, impact-resistant material and is weights and measures approved. Because it is reusable, it gives an environmentally friendly way to dispense oil compared with single-use containers.\u003c\/p\u003e\u003cp\u003eIt's supplied as the bottle with the pourer and cap fitted. Replacement pourer and cap sets (AF-OB-PC-RED, AF-OB-PC-BLK, AF-OB-PC-GRE) and the bottle on its own (AF-OB-1000) can be ordered separately.\u003c\/p\u003e\u003cp\u003eEach bottle measures 240 × 120 × 120 mm with the pourer fitted. Parts shown without a link are available on request.\u003c\/p\u003e","brand":"A-FLO Equipment","offers":[{"title":"Red","offer_id":67761471553615,"sku":"AF-OB-1000-RED","price":15.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":67916408684623,"sku":"AF-OB-1000-BLK","price":15.0,"currency_code":"AUD","in_stock":true},{"title":"Green","offer_id":67916408717391,"sku":"AF-OB-1000-GRE","price":15.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/aflo-af-ob-1000-red-1l-multi-purpose-oil-bottle-front-view.png?v=1792279994"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/banner.webp?v=1794568084","url":"https:\/\/geelongfiltersales.com.au\/collections\/trade-specials.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}