{"title":"Transmission Oils","description":"\u003cp\u003eTransmission oils for automatic, CVT and heavy-duty powershift transmissions in cars, 4WDs, light commercials, trucks and off-highway machinery. Transmission fluid works as a hydraulic fluid, a coolant and a lubricant all at once, and its friction properties are tuned to the clutches, bands or belts in a particular design. That's why transmission makers publish their own specs, and why the spec on the dipstick or in the manual matters more than the vehicle's age.\u003c\/p\u003e\u003cp\u003eChoose by transmission type first, then by the named spec or approval. The wrong fluid shows up as shudder, slip, flare or harsh shifts, and in a CVT or powershift box that can end in a rebuild. Pick your transmission type below.\u003c\/p\u003e","products":[{"product_id":"1129-04","title":"1129.04 MaxLife Multi-Vehicle, Synthetic Automatic Transmission Fluid 4L","description":"\u003cp\u003eValvoline MaxLife Multi-Vehicle ATF is a synthetic automatic transmission fluid built to cover a wide range of OEM specifications in one fluid, with seal conditioners aimed at higher-mileage transmissions to help control leaks and hold shift quality. It carries an extensive list of manufacturer approvals across Asian, European and American automatics. The 4L pack suits a single transmission service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne ATF for a wide range of automatics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe value of a multi-vehicle ATF is breadth: one fluid that can service Asian, European and American automatics which would otherwise each need their own. This synthetic fluid covers a wide range of OEM specifications and adds seal conditioners aimed at higher-mileage transmissions, to help control leaks and hold shift quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt with higher-mileage transmissions in mind\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs a transmission ages, its seals harden and can start to leak, and shift quality drifts. The seal conditioners in MaxLife are designed to keep those seals pliable to help control leaks and hold shift quality, which is exactly what a higher-mileage automatic needs. The synthetic base gives stable friction and thermal durability across the mix of transmissions it covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtensive approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a long list of manufacturer approvals across Toyota, Honda, Nissan, Ford, GM, Mercedes-Benz, ZF and many more, which is what lets it serve a mixed workshop from one fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops and owners servicing higher-mileage automatics across mixed brands. Confirm the fluid your transmission specifies is on the approvals list before use, since some transmissions require a dedicated fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing a multi-vehicle ATF correctly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA multi-vehicle fluid covers a wide range of automatics, but always confirm your transmission's specification is on the approvals list before use, since some transmissions, particularly certain CVTs and dual-clutch units, require a dedicated fluid and must not be filled with a general ATF. Follow the maker's service interval, and change the fluid sooner where the transmission works hard, tows or runs hot, since heat is what ages ATF. The seal conditioners help control leaks and hold shift quality in higher-mileage units, but a slipping or overheating transmission may need mechanical attention as well as fresh fluid. Top up and refill with the correct fluid at the level specified for the transmission.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478507675727,"sku":"1129.04","price":47.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1129-04-maxlife-multi-vehicle-synthetic-transmission-oil-4l.webp?v=1785300660"},{"product_id":"1129-20","title":"1129.20 MaxLife Multi-Vehicle, Synthetic Automatic Transmission Fluid 20L","description":"\u003cp\u003eValvoline MaxLife Multi-Vehicle ATF is a synthetic automatic transmission fluid covering a wide range of OEM specifications in one fluid, with seal conditioners for higher-mileage transmissions to help control leaks and maintain shift quality. Its broad approvals span Asian, European and American automatics. The 20L pack is the practical workshop choice for servicing multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne ATF for a wide range of automatics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe value of a multi-vehicle ATF is breadth: one fluid that can service Asian, European and American automatics which would otherwise each need their own. This synthetic fluid covers a wide range of OEM specifications and adds seal conditioners aimed at higher-mileage transmissions, to help control leaks and hold shift quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt with higher-mileage transmissions in mind\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs a transmission ages, its seals harden and can start to leak, and shift quality drifts. The seal conditioners in MaxLife are designed to keep those seals pliable to help control leaks and hold shift quality, which is exactly what a higher-mileage automatic needs. The synthetic base gives stable friction and thermal durability across the mix of transmissions it covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtensive approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a long list of manufacturer approvals across Toyota, Honda, Nissan, Ford, GM, Mercedes-Benz, ZF and many more, which is what lets it serve a mixed workshop from one fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops and owners servicing higher-mileage automatics across mixed brands. Confirm the fluid your transmission specifies is on the approvals list before use, since some transmissions require a dedicated fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing a multi-vehicle ATF correctly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA multi-vehicle fluid covers a wide range of automatics, but always confirm your transmission's specification is on the approvals list before use, since some transmissions, particularly certain CVTs and dual-clutch units, require a dedicated fluid and must not be filled with a general ATF. Follow the maker's service interval, and change the fluid sooner where the transmission works hard, tows or runs hot, since heat is what ages ATF. The seal conditioners help control leaks and hold shift quality in higher-mileage units, but a slipping or overheating transmission may need mechanical attention as well as fresh fluid. Top up and refill with the correct fluid at the level specified for the transmission.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478514262095,"sku":"1129.20","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1129-20-maxlife-multi-vehicle-synthetic-transmission-oil-20l.webp?v=1785300661"},{"product_id":"1215-04","title":"1215.04 Dexron III, Mineral Automatic Transmission Fluid 4L","description":"\u003cp\u003eValvoline Dexron III ATF is a mineral automatic transmission fluid for older automatics, power steering systems and hydraulic applications that call for a Dexron III or Mercon fluid. It delivers the friction and viscosity those units were designed around, for smooth shifts and reliable service. The 4L pack suits a single transmission or power steering service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right fluid for older automatics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder automatics were designed around a particular friction and viscosity, and giving them exactly that is what keeps shifts smooth and the transmission reliable. This mineral ATF delivers the friction and viscosity a Dexron III or Mercon system was built around, and the same properties suit many power steering and hydraulic uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched friction and viscosity\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn automatic transmission relies on the fluid to transmit power through the torque converter and to engage clutches with the right feel, both of which depend on the fluid's friction characteristics. Dexron III ATF provides the friction and viscosity older automatics were built around, so shifts stay smooth and the transmission works as intended. The same properties suit many power steering and hydraulic uses that specify this fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad older-vehicle coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Dexron IIIH, Ford Mercon and Allison C4, covering a wide range of older automatics and power steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older automatic transmissions and power steering systems specifying Dexron III or Mercon. Where a vehicle requires a newer fluid such as Dexron VI, use that instead, and confirm the specification before service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing the correct ATF\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDexron III is the right fluid for older automatics and many power steering systems that specify it, but modern transmissions that call for Dexron VI or a dedicated fluid should use those instead, so confirm the specification before filling. Follow the maker's service interval, and change sooner where the transmission tows or runs hot, since heat ages the fluid and degrades shift quality. Check and set the level correctly, usually with the transmission warm and running per the maker's method, since both overfilling and underfilling cause problems. In the older automatics and power steering systems it suits, the matched friction and viscosity are what keep operation smooth and the components protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478605389903,"sku":"1215.04","price":39.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1215-04-dexron-iii-transmission-oil-4l.webp?v=1785300669"},{"product_id":"1215-20","title":"1215.20 Dexron III, Mineral Automatic Transmission Fluid 20L","description":"\u003cp\u003eValvoline Dexron III ATF is a mineral automatic transmission fluid for older automatics, power steering and hydraulic uses calling for a Dexron III or Mercon fluid, giving the friction and viscosity those units were built around. The 20L pack is the practical workshop choice for servicing multiple vehicles and topping up power steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe right fluid for older automatics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder automatics were designed around a particular friction and viscosity, and giving them exactly that is what keeps shifts smooth and the transmission reliable. This mineral ATF delivers the friction and viscosity a Dexron III or Mercon system was built around, and the same properties suit many power steering and hydraulic uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched friction and viscosity\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn automatic transmission relies on the fluid to transmit power through the torque converter and to engage clutches with the right feel, both of which depend on the fluid's friction characteristics. Dexron III ATF provides the friction and viscosity older automatics were built around, so shifts stay smooth and the transmission works as intended. The same properties suit many power steering and hydraulic uses that specify this fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad older-vehicle coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Dexron IIIH, Ford Mercon and Allison C4, covering a wide range of older automatics and power steering systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits older automatic transmissions and power steering systems specifying Dexron III or Mercon. Where a vehicle requires a newer fluid such as Dexron VI, use that instead, and confirm the specification before service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing the correct ATF\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDexron III is the right fluid for older automatics and many power steering systems that specify it, but modern transmissions that call for Dexron VI or a dedicated fluid should use those instead, so confirm the specification before filling. Follow the maker's service interval, and change sooner where the transmission tows or runs hot, since heat ages the fluid and degrades shift quality. Check and set the level correctly, usually with the transmission warm and running per the maker's method, since both overfilling and underfilling cause problems. In the older automatics and power steering systems it suits, the matched friction and viscosity are what keep operation smooth and the components protected.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478612303951,"sku":"1215.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1215-20-dexron-iii-transmission-oil-20l.webp?v=1785300670"},{"product_id":"1218-20","title":"1218.20 Valtorque C4-50 Transmission Oil 20L","description":"\u003cp\u003eValvoline Valtorque C4-50 is a monograde SAE 50 transmission and drivetrain oil built to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. The heavier SAE 50 grade holds a thicker film for hot-running final drives and heavy load, while maintaining the defined TO-4 friction. The 20L pack suits workshops servicing plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier TO-4 grade for hot final drives\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal drives and gearing on heavy plant run hot under sustained load, and a heavier grade holds a robust film there where a lighter oil would thin. This monograde SAE 50, built to the Caterpillar TO-4 requirement, provides that film for off-highway powershift transmissions, wet brakes and heavily loaded final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilm strength with TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal drives and gearing on heavy plant run hot under sustained load, and the SAE 50 grade holds a robust film there while still meeting the TO-4 friction requirement that powershift clutches and oil-immersed brakes depend on. That lets the same oil protect the heavily loaded final drives and support the powershift transmission and wet brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4 and Allison C-4, covering off-highway powershift drivetrains and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with hot, heavily loaded final drives specifying an SAE 50 TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy final-drive use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 50 grade suits hot-running, heavily loaded final drives that need a thicker film than an SAE 30 provides, so it belongs where the machine specifies a 50 TO-4 oil rather than as a general powershift fill. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid protects the transmission, converter, wet brakes and final drives. The TO-4 friction specification keeps powershift clutches and oil-immersed brakes working correctly, so match the oil to that requirement. Change sooner under severe duty, and confirm the grade the machine calls for, as final-drive and transmission grades can differ on the same equipment.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478632259663,"sku":"1218.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1218-20-valtorque-c4-50-transmission-oil-20l.webp?v=1785300672"},{"product_id":"1221-20","title":"1221.20 Valtorque C4-30 Transmission Oil 20L","description":"\u003cp\u003eValvoline Valtorque C4-30 is a monograde SAE 30 transmission and drivetrain oil built to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. As the most common powershift grade, its clutch and brake friction control keeps shifts crisp and oil-immersed brakes quiet. The 20L pack suits workshops servicing plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA TO-4 powershift oil for off-highway drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and hold cleanly, and the Caterpillar TO-4 standard sets that requirement. This monograde SAE 30 oil is built to meet it for off-highway powershift transmissions, torque converters, wet brakes and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the TO-4 friction specification matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and to hold and release the brakes without chatter or slip. TO-4 sets that friction requirement, and Valtorque C4-30 is built to meet it, so the transmission shifts cleanly and the wet brakes work correctly. The same oil protects the torque converter and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1, covering the powershift drivetrains found on most off-highway equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with powershift transmissions, torque converters, wet brakes and final drives specifying an SAE 30 TO-4 oil. Where a cold climate or a heavier final-drive requirement applies, a lighter or heavier grade may suit, so check the equipment maker's recommendation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the powershift friction right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowershift transmissions and their wet brakes are matched to the TO-4 friction specification, so using a TO-4 oil of the correct grade is what keeps shifts crisp and wet brakes free of chatter and slip; substituting a general engine oil can upset that behaviour. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid serves the transmission, converter, brakes and final drives. Change sooner under severe duty. SAE 30 is the common powershift grade, but a colder climate or a heavier final-drive requirement may call for a lighter or heavier TO-4 grade, so confirm what the machine specifies.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478649331791,"sku":"1221.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1221-20-valtorque-c4-30-transmission-oil-20l.webp?v=1785300675"},{"product_id":"1272-20","title":"1272.20 Dexron VI, Synthetic Automatic Transmisison Fluid 20L","description":"\u003cp\u003eValvoline Dexron VI ATF is a fully synthetic, GM-approved automatic transmission fluid for modern GM automatics, and it is backwards compatible with Dexron II and III applications. Its synthetic base delivers stable friction, thermal durability and long service life for consistent shift quality under load and heat. Supplied in a 20L pack for workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA GM-approved synthetic ATF\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModern GM automatics run more gears, higher temperatures and longer service intervals than the units older fluids served, and Dexron VI is the tighter specification written for them. This fully synthetic, GM-approved fluid delivers that, and its backward compatibility means it also refreshes older Dexron II and III transmissions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStable friction and long life\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModern automatics run more gears, higher temperatures and longer service intervals than the units Dexron III served, and Dexron VI is specified to hold its friction and viscosity through that harder service. The synthetic base delivers the thermal durability and shear stability needed for consistent shift quality over a long drain, and its backward compatibility means it can also refresh older Dexron II and III transmissions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved and compatible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is officially GM Dexron VI approved and covers Dexron II, III and VI applications, so it suits both modern and older GM automatics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing modern GM automatics and earlier Dexron transmissions. Confirm your transmission specifies a Dexron VI or compatible fluid before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing a Dexron VI fluid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDexron VI is a licensed GM specification and is backwards compatible with Dexron II and III, so it can serve both modern GM automatics and older units, but confirm your transmission specifies a Dexron VI or compatible fluid before filling rather than assuming. Follow the maker's service interval, and change sooner where the transmission works hard, tows or runs hot. Check and set the fluid level by the maker's method, typically warm and running, since level errors cause shift and overheating problems. The synthetic base holds its friction and viscosity through long, hot service, which is what maintains consistent shift quality in the modern automatics Dexron VI was written for.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478692421711,"sku":"1272.20","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1272-20-dexron-vi-synthetic-transmission-oil-20l.webp?v=1785300685"},{"product_id":"1218-51","title":"1218.51 Valtorque C4-50 Transmission Oil 205L","description":"\u003cp\u003eValvoline Valtorque C4-50 is a monograde SAE 50 transmission and drivetrain oil to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. Its heavier film suits hot-running final drives under heavy load, with the correct TO-4 friction. The 205L drum is the bulk choice for fleets and sites running heavy plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA heavier TO-4 grade for hot final drives\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal drives and gearing on heavy plant run hot under sustained load, and a heavier grade holds a robust film there where a lighter oil would thin. This monograde SAE 50, built to the Caterpillar TO-4 requirement, provides that film for off-highway powershift transmissions, wet brakes and heavily loaded final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilm strength with TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinal drives and gearing on heavy plant run hot under sustained load, and the SAE 50 grade holds a robust film there while still meeting the TO-4 friction requirement that powershift clutches and oil-immersed brakes depend on. That lets the same oil protect the heavily loaded final drives and support the powershift transmission and wet brakes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4 and Allison C-4, covering off-highway powershift drivetrains and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with hot, heavily loaded final drives specifying an SAE 50 TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy final-drive use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 50 grade suits hot-running, heavily loaded final drives that need a thicker film than an SAE 30 provides, so it belongs where the machine specifies a 50 TO-4 oil rather than as a general powershift fill. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid protects the transmission, converter, wet brakes and final drives. The TO-4 friction specification keeps powershift clutches and oil-immersed brakes working correctly, so match the oil to that requirement. Change sooner under severe duty, and confirm the grade the machine calls for, as final-drive and transmission grades can differ on the same equipment.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478983860303,"sku":"1218.51","price":1600.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1218-51-valtorque-c4-50-transmission-oil-205l.webp?v=1793486720"},{"product_id":"1221-51","title":"1221.51 Valtorque C4-30 Transmission Oil 205L","description":"\u003cp\u003eValvoline Valtorque C4-30 is a monograde SAE 30 transmission and drivetrain oil to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. Its defined friction keeps powershift clutches and oil-immersed brakes working correctly. The 205L drum is the bulk choice for fleets and sites running heavy earthmoving equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA TO-4 powershift oil for off-highway drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and hold cleanly, and the Caterpillar TO-4 standard sets that requirement. This monograde SAE 30 oil is built to meet it for off-highway powershift transmissions, torque converters, wet brakes and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the TO-4 friction specification matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and to hold and release the brakes without chatter or slip. TO-4 sets that friction requirement, and Valtorque C4-30 is built to meet it, so the transmission shifts cleanly and the wet brakes work correctly. The same oil protects the torque converter and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1, covering the powershift drivetrains found on most off-highway equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with powershift transmissions, torque converters, wet brakes and final drives specifying an SAE 30 TO-4 oil. Where a cold climate or a heavier final-drive requirement applies, a lighter or heavier grade may suit, so check the equipment maker's recommendation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the powershift friction right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowershift transmissions and their wet brakes are matched to the TO-4 friction specification, so using a TO-4 oil of the correct grade is what keeps shifts crisp and wet brakes free of chatter and slip; substituting a general engine oil can upset that behaviour. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid serves the transmission, converter, brakes and final drives. Change sooner under severe duty. SAE 30 is the common powershift grade, but a colder climate or a heavier final-drive requirement may call for a lighter or heavier TO-4 grade, so confirm what the machine specifies.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45478989103183,"sku":"1221.51","price":1600.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1221-51-valtorque-c4-30-transmission-oil-205l.webp?v=1793486720"},{"product_id":"1248-20","title":"1248.20 Valtorque C4-10W Transmission Oil 20L","description":"\u003cp\u003eValvoline Valtorque C4-10W is a monograde SAE 10W transmission and drivetrain oil built to the Caterpillar TO-4 requirement, formulated for cold-climate and cold-start powershift operation. Its low-temperature fluidity gets oil moving fast to transmissions, torque converters, wet brakes and final drives, while holding the TO-4 friction those systems need. The 20L pack suits workshops servicing plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA cold-flow TO-4 oil for powershift drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. A monograde SAE 10W built to the Caterpillar TO-4 requirement solves that with fast low-temperature flow, while still holding the friction those powershift clutches and brakes need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold performance without losing TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. The SAE 10W grade solves that with fast low-temperature flow, while still holding the TO-4 friction character that powershift clutches and oil-immersed brakes need to work correctly. It protects the transmission, torque converter, wet brakes and final drives together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits cold-climate earthmoving and mining plant needing rapid cold-start flow through a powershift drivetrain specifying an SAE 10W TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold-climate powershift use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 10W grade is chosen so oil reaches the transmission and wet brakes quickly on a cold start, which protects a powershift drivetrain in the first minutes before it warms. Use it where the machine specifies a 10W TO-4 oil for cold conditions, follow the maker's service interval and grade recommendation, and keep the oil clean since it serves the transmission, converter, brakes and final drives together. The TO-4 friction specification is what keeps shifts crisp and wet brakes free of chatter, so match the oil to that requirement rather than substituting a general engine oil. Change sooner under severe or dusty duty.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479026065487,"sku":"1248.20","price":209.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1248-20-valtorque-c4-10w-transmission-oil-20l.webp?v=1785300678"},{"product_id":"1248-51","title":"1248.51 Valtorque C4-10W Transmission Oil 205L","description":"\u003cp\u003eValvoline Valtorque C4-10W is a monograde SAE 10W transmission and drivetrain oil to the Caterpillar TO-4 requirement, built for cold-start and cold-climate powershift operation. Its low-temperature fluidity protects transmissions, converters, wet brakes and final drives from the first turn, holding the correct TO-4 friction. The 205L drum is the bulk choice for fleets and sites.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA cold-flow TO-4 oil for powershift drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. A monograde SAE 10W built to the Caterpillar TO-4 requirement solves that with fast low-temperature flow, while still holding the friction those powershift clutches and brakes need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold performance without losing TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. The SAE 10W grade solves that with fast low-temperature flow, while still holding the TO-4 friction character that powershift clutches and oil-immersed brakes need to work correctly. It protects the transmission, torque converter, wet brakes and final drives together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits cold-climate earthmoving and mining plant needing rapid cold-start flow through a powershift drivetrain specifying an SAE 10W TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold-climate powershift use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 10W grade is chosen so oil reaches the transmission and wet brakes quickly on a cold start, which protects a powershift drivetrain in the first minutes before it warms. Use it where the machine specifies a 10W TO-4 oil for cold conditions, follow the maker's service interval and grade recommendation, and keep the oil clean since it serves the transmission, converter, brakes and final drives together. The TO-4 friction specification is what keeps shifts crisp and wet brakes free of chatter, so match the oil to that requirement rather than substituting a general engine oil. Change sooner under severe or dusty duty.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479035666511,"sku":"1248.51","price":1700.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1248-51-valtorque-c4-10w-transmission-oil-205l.webp?v=1793486720"},{"product_id":"1382-20","title":"1382.20 SynGard E-386 Synthetic Transmission Oil 20L","description":"\u003cp\u003eValvoline SynGard E-386 is an advanced synthetic transmission fluid engineered for heavy-duty manual truck transmissions, delivering peak protection and extended service life in the harshest conditions. Meeting API MT-1 with Eaton PS-386, Mack, Meritor and Volvo approvals, it protects gears and synchronisers while its wide temperature performance keeps shifting smooth. The 20L pack suits fleet workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA synthetic fluid for heavy-duty manual transmissions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeavy-truck manual gearboxes work under high load and heat over long distances, which is exactly where a synthetic fluid outperforms a conventional one. This advanced synthetic transmission fluid holds its viscosity and protective film across a wide temperature range, protecting the gears and synchronisers while keeping shifting smooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection and extended life\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe synthetic base holds its viscosity and protective film across a wide temperature range, protecting the gears and synchronisers under sustained load while resisting the thermal breakdown that shortens fluid life. That durability supports the extended drain intervals that keep trucks earning and reduce running costs, and it keeps shifting smooth in cold and hot conditions alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide truck approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets API MT-1 with approvals including Eaton PS-386, Mack, Meritor and Volvo, the standards heavy-duty manual truck transmissions call for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops and fleets servicing heavy-duty manual truck transmissions. Confirm the fluid specification your gearbox requires before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManual truck transmission service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSynGard E-386 is a fluid for heavy-duty manual truck transmissions, so confirm your gearbox specifies an API MT-1 fluid with the relevant Eaton, Mack, Meritor or Volvo approval before filling, since manual boxes and their synchronisers are matched to a particular fluid. Follow the maker's service interval, which the synthetic base is designed to extend, and change sooner under severe duty. Fill to the correct level. The synthetic base holds its viscosity and protective film across a wide temperature range, protecting gears and synchronisers under load while keeping shifting smooth in cold and hot conditions, which is what supports the long drains that keep a truck fleet's running costs down.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479077380175,"sku":"1382.20","price":900.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1382-20-syngard-atf-e386-synthetic-transmission-fluid-20l.webp?v=1785300711"},{"product_id":"1382-51","title":"1382.51 SynGard E-386 Synthetic Transmission Fluid 205L","description":"\u003cp\u003eValvoline SynGard E-386 is an advanced synthetic transmission fluid for heavy-duty manual truck transmissions, built for peak protection and extended service life. Meeting API MT-1 with Eaton PS-386, Mack, Meritor and Volvo approvals, it protects gears and synchronisers and holds smooth shifting across a wide temperature range. The 205L drum is the bulk choice for fleets and depots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA synthetic fluid for heavy-duty manual transmissions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeavy-truck manual gearboxes work under high load and heat over long distances, which is exactly where a synthetic fluid outperforms a conventional one. This advanced synthetic transmission fluid holds its viscosity and protective film across a wide temperature range, protecting the gears and synchronisers while keeping shifting smooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection and extended life\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe synthetic base holds its viscosity and protective film across a wide temperature range, protecting the gears and synchronisers under sustained load while resisting the thermal breakdown that shortens fluid life. That durability supports the extended drain intervals that keep trucks earning and reduce running costs, and it keeps shifting smooth in cold and hot conditions alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide truck approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets API MT-1 with approvals including Eaton PS-386, Mack, Meritor and Volvo, the standards heavy-duty manual truck transmissions call for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops and fleets servicing heavy-duty manual truck transmissions. Confirm the fluid specification your gearbox requires before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManual truck transmission service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSynGard E-386 is a fluid for heavy-duty manual truck transmissions, so confirm your gearbox specifies an API MT-1 fluid with the relevant Eaton, Mack, Meritor or Volvo approval before filling, since manual boxes and their synchronisers are matched to a particular fluid. Follow the maker's service interval, which the synthetic base is designed to extend, and change sooner under severe duty. Fill to the correct level. The synthetic base holds its viscosity and protective film across a wide temperature range, protecting gears and synchronisers under load while keeping shifting smooth in cold and hot conditions, which is what supports the long drains that keep a truck fleet's running costs down.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479097860175,"sku":"1382.51","price":6000.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1382-51-syngard-e-386-synthetic-transmission-fluid-205l.webp?v=1793486757"},{"product_id":"1415-20","title":"1415.20 Syngard ES Synthetic Automatic Transmission Fluid 20L","description":"\u003cp\u003eValvoline Syn Gard ATF ES is a synthetic automatic transmission fluid for heavy-duty automatic transmissions in modern trucks, buses and utility vehicles. It is built from premium synthetic base stocks with long-life friction modifiers, anti-wear additives and shear stable viscosity modifiers for thermal protection, low temperature flow, wear protection and shear stability. The 20L pack suits workshops and fleets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAllison TES-295: formulated for, not approved\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eValvoline recommends Syn Gard ATF ES for vehicles requiring Allison TES-295 fluids, but states that it is not approved by Allison for that specification. If the transmission warranty or a fleet contract requires an Allison-approved fluid, use \u003ca href=\"\/products\/1448-20\"\u003eSyn Gard 668 ATF\u003c\/a\u003e instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals and specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproved:\u003c\/strong\u003e Voith H55.6336.33 (G1363), with a 120,000 km drain interval, and ZF TE-ML 03D, 04D, 14B, 17C, 20B and 25B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed:\u003c\/strong\u003e Allison TES 295 (not Allison approved), Allison C-4, Dexron IIIH and IIIG, Mercon V, MAN 339 F, V1, V2, Z1 and Z2, DTFR 13C170 (formerly MB 236.9), Volvo 97341, Voith H55.6335.33 (G607) and John Deere articulated dump trucks (ADTs).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the owner's manual before use. Valvoline notes it may be unsuitable for some transmissions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy synthetic\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFights heat, deposits and wear, the three major causes of transmission failure.\u003c\/li\u003e\n\u003cli\u003eFlows well at low temperatures for smooth power transfer and gear changes on cold starts.\u003c\/li\u003e\n\u003cli\u003eKeeps shifts smooth for longer than conventional automatic fluids.\u003c\/li\u003e\n\u003cli\u003eReduces varnish and wear for longer transmission life.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTypical properties\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eViscosity 7.4 mm²\/s at 100°C and 35 mm²\/s at 40°C, viscosity index 185, Brookfield 10,500 cP at -40°C, pour point -48°C, flash point 220°C. Red.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479100088399,"sku":"1415.20","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1415-20-syngard-atf-es-transmission-fluid-20l.webp?v=1785300719"},{"product_id":"1409-20","title":"1409.20 Valtorque C4-60 Transmission Oil 20L","description":"\u003cp\u003eValvoline Valtorque C4-60 is a monograde SAE 60 final-drive fluid built to the Caterpillar TO-4 requirement, delivering the heaviest film in the range for high-load final drives and gearing in off-highway machinery. Its thick, stable film maximises load-carrying capacity while holding the TO-4 friction wet brakes rely on. Supplied in a 20L pack for workshops servicing heavy plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe heaviest TO-4 grade for high-load final drives\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhere final drives carry the greatest load, the thickest film provides the most protection, and that is the job of an SAE 60 grade. Built to the Caterpillar TO-4 requirement, this monograde delivers the heaviest film in the range for high-load final drives and gearing in off-highway machinery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaximum film for the hardest-loaded gearing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 60 grade maximises the oil film that stays between heavily loaded gear teeth, resisting the squeeze-out that low speeds and high torque drive, while still meeting the TO-4 friction requirement that oil-immersed brakes rely on. That combination suits the final drives and gearing that take the most punishment on heavy plant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApprovals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2 and API GL-4, covering the high-load final-drive applications on off-highway machinery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits off-highway machinery with the highest-load final drives and gearing specifying an SAE 60 TO-4 fluid. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighest-load final-drive use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 60 grade provides the heaviest film in the range for the most heavily loaded final drives and gearing, so it is used specifically where the machine calls for a 60 TO-4 fluid, not as a general fill. Follow the equipment maker's service interval and grade recommendation, and keep the fluid clean. The TO-4 friction specification keeps oil-immersed brakes working correctly, so match the fluid to that requirement rather than substituting another oil. Change sooner under severe duty. Because final-drive and transmission grades can differ on the same machine, confirm exactly what each compartment specifies so the heaviest-loaded gearing gets the film it needs.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479912538191,"sku":"1409.2","price":229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1409-20-valtorque-c4-60-transmission-oil-20l.webp?v=1785301050"},{"product_id":"1448-20","title":"1448.20 Syn Gard 668 Synthetic Automatic Transmission Fluid 20L","description":"\u003cp\u003eValvoline Syn Gard 668 is a fully synthetic automatic transmission fluid that is Allison TES-668 approved and backwards compatible with TES-295, TES-389 and TES-468 applications, including the Allison 1000 to 4000 series. Its premium synthetic base extends drain intervals and holds shift quality under heavy-duty heat and load. Supplied in a 20L pack for fleet workshops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn Allison TES-668 synthetic ATF\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAllison automatics in trucks, buses and equipment run under high load and heat for long intervals, and using a licensed fluid gives them the exact properties they were designed around. This fully synthetic fluid is Allison TES-668 approved and backwards compatible with TES-295, TES-389 and TES-468, so one fluid serves a range of Allison units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for heavy-duty Allison service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAllison automatics in trucks, buses and equipment run under high load and heat for long intervals, and the synthetic base of Syn Gard 668 holds its friction and viscosity through that service to maintain shift quality and support extended drains. Its backward compatibility means it also covers earlier Allison specifications, so one fluid serves a range of Allison units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApproved and compatible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is Allison TES-668 approved and covers TES-295, TES-389 and TES-468 applications across the Allison 1000 to 4000 series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops servicing Allison automatic transmissions in trucks, buses and equipment. Confirm your transmission's Allison fluid specification before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAllison service and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSyn Gard 668 meets Allison's latest TES-668 specification and is backwards compatible with TES-295, TES-389 and TES-468, so it covers a range of Allison units, but confirm your transmission's required specification before filling. Follow Allison's service interval, which the synthetic base helps extend, and change sooner under severe duty or high heat. Set the fluid level by the maker's method, warm and running, since level errors cause shift and overheating problems on these transmissions. The synthetic base holds its friction and viscosity through the high loads and long intervals Allison automatics run in trucks, buses and equipment, which is what maintains shift quality over a long service life.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479924105295,"sku":"1448.20","price":389.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1448-20-syn-gard-atf-668-transmission-fluid-20l.webp?v=1785301051"},{"product_id":"1248","title":"1248 IBC Valtorque C4-10W Transmission Oil 1000L","description":"\u003cp\u003eValvoline Valtorque C4-10W is a monograde SAE 10W transmission and drivetrain oil built to the Caterpillar TO-4 requirement, formulated for cold-climate and cold-start powershift operation. Its low-temperature fluidity delivers fast flow to transmissions, converters, wet brakes and final drives while holding the correct TO-4 friction. Supplied in a 1000L IBC for high-volume dispensing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA cold-flow TO-4 oil for powershift drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. A monograde SAE 10W built to the Caterpillar TO-4 requirement solves that with fast low-temperature flow, while still holding the friction those powershift clutches and brakes need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold performance without losing TO-4 friction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn cold conditions a heavier oil is sluggish to circulate, which can leave a powershift transmission and its wet brakes under-lubricated at start-up. The SAE 10W grade solves that with fast low-temperature flow, while still holding the TO-4 friction character that powershift clutches and oil-immersed brakes need to work correctly. It protects the transmission, torque converter, wet brakes and final drives together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits cold-climate earthmoving and mining plant needing rapid cold-start flow through a powershift drivetrain specifying an SAE 10W TO-4 oil. Confirm the grade the equipment calls for before selecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCold-climate powershift use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SAE 10W grade is chosen so oil reaches the transmission and wet brakes quickly on a cold start, which protects a powershift drivetrain in the first minutes before it warms. Use it where the machine specifies a 10W TO-4 oil for cold conditions, follow the maker's service interval and grade recommendation, and keep the oil clean since it serves the transmission, converter, brakes and final drives together. The TO-4 friction specification is what keeps shifts crisp and wet brakes free of chatter, so match the oil to that requirement rather than substituting a general engine oil. Change sooner under severe or dusty duty.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479928004687,"sku":"1248","price":7700.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1248-ibc-valtorque-c4-10w-transmission-oil-1000l.webp?v=1785301053"},{"product_id":"1330-05","title":"1330.05 SynPower CVT Synthetic Transmission Fluid 5L","description":"\u003cp\u003eValvoline SynPower CVT is a premium full synthetic, multi-vehicle continuously variable transmission fluid for passenger cars and vans using belt and chain-driven CVTs. It is engineered to maintain the precise friction a CVT needs to prevent belt slip, shudder and overheating, protecting the transmission across a wide range of makes. Supplied in a 5L pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA dedicated fluid for continuously variable transmissions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA CVT transfers drive through a steel belt or chain running between variable pulleys, and it depends on a very specific friction level to grip without slipping. This premium full synthetic, multi-vehicle CVT fluid is engineered to deliver and hold that precise friction, keeping belt and chain-driven transmissions smooth, cool and protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CVT fluid is different\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA CVT transfers drive through a steel belt or chain running between variable pulleys, and it depends on a very specific friction level to grip without slipping. Too little friction and the belt slips and wears; the wrong friction character and the transmission can shudder or overheat. SynPower CVT is engineered to deliver and hold that precise friction, keeping the transmission smooth, cool and protected across a wide range of makes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMulti-vehicle coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt covers a broad list of belt and chain CVT specifications from Japanese, Korean and European makers, which lets one fluid serve many CVT applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits passenger-car and van CVTs. Because CVT fluids are matched closely to the transmission, confirm your vehicle's CVT fluid specification is covered before use, and do not substitute a conventional ATF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CVT fluid is not interchangeable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA CVT depends on a very specific fluid to grip its belt or chain without slipping, so a CVT fluid must never be replaced with a conventional ATF, and even among CVT fluids you should confirm your vehicle's specification is covered before filling. Follow the maker's service interval, and change sooner where the transmission runs hot or works hard, since a CVT is sensitive to fluid condition and heat. A shudder, flare or hot-running CVT often traces back to worn or incorrect fluid, which a correct, fresh fill addresses. Set the level precisely by the maker's method, as a CVT is particularly intolerant of an incorrect fluid level.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45482351427663,"sku":"1330.05","price":87.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1330-05-synpower-cvt-synthetic-transmission-fluid-5l.webp?v=1785301290"},{"product_id":"1221","title":"1221 IBC Valtorque C4-30 Transmission Oil 1000L","description":"\u003cp\u003eValvoline Valtorque C4-30 is a monograde SAE 30 transmission and drivetrain oil built to the Caterpillar TO-4 requirement for off-highway powershift transmissions, torque converters, wet brakes and final drives. As the most common powershift grade, its clutch and brake friction keeps shifts crisp and wet brakes quiet. Supplied in a 1000L IBC for high-volume dispensing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA TO-4 powershift oil for off-highway drivetrains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and hold cleanly, and the Caterpillar TO-4 standard sets that requirement. This monograde SAE 30 oil is built to meet it for off-highway powershift transmissions, torque converters, wet brakes and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the TO-4 friction specification matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA powershift transmission and its oil-immersed wet brakes depend on a precisely defined friction level to shift crisply and to hold and release the brakes without chatter or slip. TO-4 sets that friction requirement, and Valtorque C4-30 is built to meet it, so the transmission shifts cleanly and the wet brakes work correctly. The same oil protects the torque converter and final drives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad approvals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt meets Caterpillar TO-4 and TO-2, API GL-4, Allison C-4 and Komatsu KES 07.868.1, covering the powershift drivetrains found on most off-highway equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits earthmoving and mining plant with powershift transmissions, torque converters, wet brakes and final drives specifying an SAE 30 TO-4 oil. Where a cold climate or a heavier final-drive requirement applies, a lighter or heavier grade may suit, so check the equipment maker's recommendation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the powershift friction right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePowershift transmissions and their wet brakes are matched to the TO-4 friction specification, so using a TO-4 oil of the correct grade is what keeps shifts crisp and wet brakes free of chatter and slip; substituting a general engine oil can upset that behaviour. Follow the equipment maker's service interval and grade recommendation, and keep the oil clean, since the same fluid serves the transmission, converter, brakes and final drives. Change sooner under severe duty. SAE 30 is the common powershift grade, but a colder climate or a heavier final-drive requirement may call for a lighter or heavier TO-4 grade, so confirm what the machine specifies.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":46485030371407,"sku":"1221","price":7770.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-1221-valtorque-c4-30-ibc.webp?v=1788351256"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/collections\/Transmission-Fluid_Category-Image.webp?v=1781693776","url":"https:\/\/geelongfiltersales.com.au\/collections\/transmission-oil.oembed","provider":"Geelong Filter Sales","version":"1.0","type":"link"}