{"product_id":"0971-88","title":"0971.88 Clear DOT3 Brake Fluid 2.5L","description":"\u003cp\u003eValvoline Clear DOT 3 is a glycol-based brake fluid meeting the DOT 3 standard, supplied in a 2.5L pack for workshops. As the standard-service fluid for hydraulic brake and clutch systems that do not require the higher boiling points of DOT 4, it delivers consistent braking and protects the system against internal corrosion. The clear colour makes it easy to judge fluid condition during a flush.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStandard-service DOT 3 in a workshop pack\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor hydraulic brake and clutch systems that do not need the higher boiling points of DOT 4, this glycol DOT 3 fluid is the standard-service choice, delivering consistent braking and internal corrosion protection. Its clear colour is a practical bonus: when clean fluid runs at the bleeder, the colour change tells you the old fluid has been fully flushed through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the clear colour helps\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFresh brake fluid is light in colour and darkens as it ages and absorbs moisture. Because this fluid is clear, it makes a flush easier to judge: when clean fluid runs at the bleeder, the colour change tells you the old fluid has been pushed through. That is a practical advantage when you are working through several vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection and standards\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCorrosion inhibitors protect the seals, cylinders and metal internals of the hydraulic system, and it meets DOT 3, SAE J1703, FMVSS 116 and AS\/NZS 1960.1 Grade 1. The 2.5L pack holds enough for full fluid changes across multiple vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt suits workshops carrying out brake fluid changes on cars and light commercials that specify DOT 3. Where a vehicle requires DOT 4, use a DOT 4 fluid, and confirm the required grade before service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlushing and change intervals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause glycol fluid absorbs moisture over time, a scheduled flush every couple of years keeps the boiling point up and slows internal corrosion, which matters as much as topping up a low reservoir. The clear colour is a practical help here: keep bleeding at each wheel until clean, fresh-coloured fluid runs through, and you can see the old fluid has been fully replaced. Use fluid from a sealed container, keep it off paint, and never introduce a silicone DOT 5 product into a glycol system. For any vehicle that calls for DOT 4, use a DOT 4 fluid instead, and always confirm the specification before starting the job.\u003c\/p\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":45479935770703,"sku":"0971.88","price":53.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/9110\/1519\/files\/valvoline-0971-88-clear-dot3-brake-fluid-2-5l.webp?v=1785301052","url":"https:\/\/geelongfiltersales.com.au\/products\/0971-88","provider":"Geelong Filter Sales","version":"1.0","type":"link"}