What hose is used for AdBlue?
Hose with a DEF-compatible inner tube, commonly EPDM, with stainless steel or plastic fittings. Avoid brass, copper and zinc-plated parts anywhere the fluid touches. If a reel is sold bare, fit hose specifically rated for AdBlue rather than whatever is on the shelf.
Spring rewind or manual reel?
Spring rewind for a busy fill point, manual for long runs or occasional use. A spring reel with a latch holds the hose at the length you need and retracts it with a short pull. Walk the hose back in rather than letting it fly, so the nozzle doesn't hit the reel. Compare reels on these points:
- Hose and swivel materials rated for AdBlue
- Hose bore to match the pump and nozzle
- Hose length and reach to the filler
- Working pressure against the pump
- Supplied bare or with hose fitted
- Mounting: wall, floor, ceiling or vehicle
Where should an AdBlue reel be mounted?
Somewhere sheltered, close to the pump and within easy reach of the vehicles. Direct sun heats the hose and the fluid sitting in it, which ages both. In cold areas, a hose left full overnight can freeze, since AdBlue freezes at around minus 11°C. Label the reel clearly so it never gets used for diesel or oil.
Finish the line with AdBlue nozzles, see the air operated AdBlue kits that come with a reel, compare reels for other fluids, or ask us about mounting.