Hydraulic Filter Heads & In-Tank Housings (22)

Hydraulic filter heads and in-tank housings are the fixed half of a hydraulic filter. Heads plumb into the line and take a replaceable spin-on can, while in-tank return filters mount through the reservoir lid so returning oil is cleaned as it enters the tank. They're used for new installations, adding filtration to a circuit and replacing a cracked or worn head. Pressure rating, flow, port type and whether you want a bypass decide the fit. A head run above its pressure rating can crack, and one without a bypass needs a filter element strong enough to take the full pressure drop. The selection points are listed below the products.

Donaldson – K040811 – FIK hydraulic in-tank return filter assembly, SAE-12 – side view

22 products

  • Donaldson – P766599 – FIK-FIS150 hydraulic in-tank filter housing, 1-1/4 in BSP – side view
    Vendor:
    Donaldson

    P766599 Hydraulic In-Tank Filter Housing, FIK-FIS150, 1-1/4" BSP Port, 150 L/min, Housing Only

    Regular price $188.60 AUD
    Sale price $188.60 AUD Regular price
  • Donaldson – P766598 – FIK-FIS100 hydraulic in-tank filter housing, 1 in BSP – side view
    Vendor:
    Donaldson

    P766598 Hydraulic In-Tank Filter Housing, FIK-FIS100, 1" BSP Port, 100 L/min, Housing Only

    Regular price $165.70 AUD
    Sale price $165.70 AUD Regular price
  • Donaldson – P766597 – FIK-FIS60 hydraulic in-tank filter housing, 3/4 in BSP – side view
    Vendor:
    Donaldson

    P766597 Hydraulic In-Tank Filter Housing, FIK-FIS60, 3/4" BSP Port, 60 L/min, Housing Only

    Regular price $164.70 AUD
    Sale price $164.70 AUD Regular price
  • Donaldson – P766619 – FIK-FIS40 hydraulic in-tank filter housing, 1/2 in BSP – side view
    Vendor:
    Donaldson

    P766619 Hydraulic In-Tank Filter Housing, FIK-FIS40, 1/2" BSP Port, 40 L/min, Housing Only

    Regular price $193.60 AUD
    Sale price $193.60 AUD Regular price
  • Donaldson – P576564 – SP50/60 hydraulic filter head assembly, SAE-20 O-ring – front and side view
    Vendor:
    Donaldson

    P576564 Hydraulic Filter Head Assembly, SP50/60, SAE-20 O-Ring Ports, 25 psi Bypass, Indicator Ports Both Sides

    Regular price $187.40 AUD
    Sale price $187.40 AUD Regular price
  • Donaldson – P576558 – SP50/60 hydraulic filter head assembly, 1-1/4 in NPT – front and side view
    Vendor:
    Donaldson

    P576558 Hydraulic Filter Head Assembly, SP50/60, 1-1/4" NPT Ports, No Bypass, Indicator Ports Both Sides

    Regular price $185.60 AUD
    Sale price $185.60 AUD Regular price
  • Donaldson – P576557 – SP50/60 hydraulic filter head assembly, 1-1/4 in NPT – front and side view
    Vendor:
    Donaldson

    P576557 Hydraulic Filter Head Assembly, SP50/60, 1-1/4" NPT Ports, 25 psi Bypass, Indicator Ports Both Sides

    Regular price $187.40 AUD
    Sale price $187.40 AUD Regular price
  • Donaldson – P563274 – SP80/90 hydraulic filter head assembly, 1-1/2 in NPT – front and side view
    Vendor:
    Donaldson

    P563274 Hydraulic Filter Head Assembly, SP80/90 Dual, 1-1/2" NPT Ports, 25 psi Bypass, Indicator Ports Both Sides

    Regular price $583.20 AUD
    Sale price $583.20 AUD Regular price
  • Donaldson – P576565 – SP50/60 hydraulic filter head assembly, SAE-20 O-ring – front and side view
    Vendor:
    Donaldson

    P576565 Hydraulic Filter Head Assembly, SP50/60, SAE-20 O-Ring Ports, No Bypass, Indicator Ports Both Sides

    Regular price $185.60 AUD
    Sale price $185.60 AUD Regular price
  • Donaldson – K040503 – FIK hydraulic in-tank return filter assembly, 1 in BSP – side view
    Vendor:
    Donaldson

    K040503 Hydraulic In-Tank Filter Assembly, FIK, 1" BSP Port, 100 L/min

    Regular price $111.70 AUD
    Sale price $111.70 AUD Regular price
  • Donaldson – K040811 – FIK hydraulic in-tank return filter assembly, SAE-12 – side view
    Vendor:
    Donaldson

    K040811 Hydraulic In-Tank Filter Assembly, FIK, SAE-12 O-Ring Port, 53 L/min

    Regular price $198.60 AUD
    Sale price $198.60 AUD Regular price
  • Donaldson – K040812 – FIK hydraulic in-tank return filter assembly, SAE-16 – side view
    Vendor:
    Donaldson

    K040812 Hydraulic In-Tank Filter Assembly, FIK, SAE-16 O-Ring Port, 86 L/min

    Regular price $191.40 AUD
    Sale price $191.40 AUD Regular price
  • Donaldson P173448 Hydraulic Filter Head Assembly, Duramax HMK05, 1-1/4" BSPP Ports, 25 psi Bypass
    Vendor:
    Donaldson

    P173448 Hydraulic Filter Head Assembly, Duramax HMK05, 1-1/4" BSPP Ports, 25 psi Bypass

    Regular price $331.50 AUD
    Sale price $331.50 AUD Regular price
  • Donaldson – P166664 – Duramax HMK04 hydraulic filter head assembly, no bypass – front and side view
    Vendor:
    Donaldson

    P166664 Hydraulic Filter Head Assembly, Duramax HMK04, SAE-16 O-Ring Ports, No Bypass, Indicator Ports Both Sides

    Regular price $204.80 AUD
    Sale price $204.80 AUD Regular price
  • Donaldson – P175017 – FBK60/80 hydraulic filter head assembly, 3/4 in BSPP – front and side view
    Vendor:
    Donaldson

    P175017 Hydraulic Filter Head Assembly, FBK60/80, 3/4" BSPP Ports, 25 psi Bypass, Indicator Ports Both Sides

    Regular price $56.80 AUD
    Sale price $56.80 AUD Regular price

Spin-on head or in-tank filter?

A spin-on head mounts in the line and makes can changes quick. An in-tank return filter sits inside the reservoir with only the cap above the lid, saving space and cutting external plumbing and leak points.

Choosing a hydraulic filter head

  • Pressure rating: return-line heads are low pressure, and medium pressure heads suit charge and pilot circuits. Stay within the rating.
  • Flow: size for the maximum flow through the line, allowing for thicker oil on cold starts.
  • Ports: BSPP, NPT and SAE O-ring boss threads aren't interchangeable. Match the existing plumbing.
  • Bypass or no bypass: see below.
  • Indicator ports: choose a head with ports if you want to fit a visual or electrical service indicator.
  • Single or dual: dual heads take a pair of cans for higher flow.

Do I need a bypass valve?

Most mobile machines use one. When oil is cold or the filter is loaded, the valve opens and keeps oil flowing rather than letting pressure build until something gives. Where a component can't tolerate any unfiltered oil, a non-bypass head with a high-collapse element and an indicator makes sure all the oil passes through the media.

Fit the head with the right spin-on hydraulic filter and a service indicator, or get a complete package in hydraulic filter kits. Get in touch if you need help matching ports.

Which head takes the spin-on cans I already run?

Go by the thread on the can, then confirm the can is in the list on the head's product page:

Replacing a cracked head on a machine? Several heads carry OEM numbers in their cross-reference tab, such as Volvo 11036312 for the P166088 and MacDon 139490 for the P576564. If neither your can nor your head number is listed, send it to us and we'll match it.

What else do I need with an in-tank FIK filter?

It depends which one you buy. The K040503, K040812 and K040811 assemblies come with a 36 micron cellulose cartridge fitted. The P766619, P766597, P766598 and P766599 housings come without a cartridge or breather, so add both:

  • Cartridge: FIK cartridges are in our hydraulic filter elements, in Synteq synthetic, cellulose and wire mesh grades. For the FIS100 housing and the K040503 and K040812 that's P171531 (11 micron), P171532 (23 micron), P171533 (36 micron) or P171535 (60 micron wire mesh). The bypass valve comes with each element, so every change renews it.
  • Breather: the housing is open to the tank, so fit a breather on top to keep dust and moisture out. Ours are in T.R.A.P. breathers and air breathers; check the thread on the FIK head first.

Then check the tank. The FIS60, FIS100 and FIS150 housings and the K040503 need a 90 mm opening, the FIS40 a 59 mm opening, and the K040812 and K040811 an 80.6 mm hole. Allow 84 to 212 mm above the housing to lift the element out, and keep the outlet well below the oil level so returning oil doesn't foam.

I want a head with no bypass. What do I need to run it safely?

A way to see the can loading, and a can built to take the pressure drop. With no bypass all the oil goes through the media, so a blocked can restricts flow instead of opening a valve.

  • Indicator or gauge: all five no-bypass heads have ports for one. The Duramax P166664 takes the HMK service indicators. Of the FBK160/200 heads, the P506139 has a top port on the pressure side as well as side ports, while the P173403 has side ports only, which Donaldson lists for suction-side gauges.
  • Can: for the P166664, Donaldson offers high-collapse HMK04 cans, the P163542 (11 micron) and P163567 (23 micron).
  • Change on condition: change the can on the indicator or gauge reading, not just on hours.

If the circuit doesn't need every drop filtered, the bypass version of the same head is simpler to live with: P166088 for the HMK04, P761314 for the FBK160/200, and P576557 or P576564 for the SP50/60.