Filtration (4157)

Heavy-duty filters protect the diesel engines, hydraulic circuits and drivelines that trucks, tractors, earthmovers, gensets and workshop fleets depend on. This department brings together fuel, oil, hydraulic, air, transmission, coolant and crankcase filters from leading filter manufacturers, so you can service a whole machine from one place.

A filter has to fit, but it also has to suit the system. Micron rating, bypass valve setting, media and seal design all change what it does once it's running, and filters that share a thread and gasket can behave very differently on the engine. Fit the wrong one and nothing shows at first, then an injector, pump or bearing wears out early. Search by part number, or pick the system you're working on from the guide below.

Filtration

4157 products

  • Fleetguard FF167A Fuel Filter – Can Type, Rolled Paper
    Vendor:
    Fleetguard

    FF167A Fuel Filter- Can Type, Rolled Paper

    Regular price $8.50 AUD
    Sale price $8.50 AUD Regular price
  • Baldwin BF825 Fuel Filter – Can Type
    Vendor:
    Baldwin

    BF825 Fuel Filter- Can Type

    Regular price $9.00 AUD
    Sale price $9.00 AUD Regular price
  • Baldwin BT839-10 Hydraulic Filter – Spin-on, Low Pressure, 30 micron
    Vendor:
    Baldwin

    BT839-10 Hydraulic Filter- Spin-on, Low Pressure, 30 Mic

    Regular price $33.00 AUD
    Sale price $33.00 AUD Regular price
  • Racor PFF5510 Spin-On Fuel/ Water Separator – 10um, Inboard and Outboard Petrol Applications
    Vendor:
    Racor

    PFF5510 Spin-On Fuel Water Separator, 10um, suits Mercury, Mercruiser, Yamaha, Suzuki, Honda and Tohatsu Inboard & Outboard Applications

    3 in stock
    Regular price $34.00 AUD
    Sale price $34.00 AUD Regular price
  • Baldwin BF790 Fuel Filter – Spin-on
    Vendor:
    Baldwin

    BF790 Fuel Filter- Spin-on

    1 in stock
    Regular price $25.50 AUD
    Sale price $25.50 AUD Regular price
  • Baldwin BF7608 Fuel Filter – Spin-on
    Vendor:
    Baldwin

    BF7608 Fuel Filter- Spin-on

    Regular price $25.50 AUD
    Sale price $25.50 AUD Regular price
  • Fleetguard FF5114 Fuel Filter – Spin-on, 20 micron
    Vendor:
    Fleetguard

    FF5114 Fuel Filter- Spin-on, 20 Mic

    4 in stock
    Regular price $14.60 AUD
    Sale price $14.60 AUD Regular price
  • Baldwin PF7698 Fuel Filter – Cartridge, Lid
    Vendor:
    Baldwin

    PF7698 Fuel Filter- Element, Lid

    Regular price $66.00 AUD
    Sale price $66.00 AUD Regular price
  • Baldwin BT8420 Hydraulic Filter – Spin-on, Low Pressure, Wire Mesh, 144 micron
    Vendor:
    Baldwin

    BT8420 Hydraulic Filter- Spin-on, Low Pressure, Wire Mesh, 144 Mic

    2 in stock
    Regular price $46.50 AUD
    Sale price $46.50 AUD Regular price
  • Baldwin B179 Lube Filter – Full Flow, Spin-on, 8 PSI Bypass Valve, ADV
    Vendor:
    Baldwin

    B179 Lube Filter- Full Flow, Spin-on, 8 psi BPV, ADV

    2 in stock
    Regular price $14.60 AUD
    Sale price $14.60 AUD Regular price
  • Fleetguard FF5040 Fuel Filter – Spin-on
    Vendor:
    Fleetguard

    FF5040 Fuel Filter- Spin-on

    4 in stock
    Regular price $23.00 AUD
    Sale price $23.00 AUD Regular price
  • Donaldson X903285 Filter Kit, Nissan Navara D40 YD25DDTI 2.5L 2005
    Vendor:
    Donaldson

    X903285 Filter Kit, Nissan Navara D40 YD25DDTI 2.5L 2005-2014 (Vin MNT)

    Regular price $77.60 AUD
    Sale price $77.60 AUD Regular price
  • Baldwin PF10 Fuel Filter – Cartridge, Fuel Storage
    Vendor:
    Baldwin

    PF10 Fuel Filter- Element, Fuel Storage

    Regular price $31.50 AUD
    Sale price $31.50 AUD Regular price
  • Baldwin BF940 Fuel Filter – Spin-on
    Vendor:
    Baldwin

    BF940 Fuel Filter- Spin-on

    6 in stock
    Regular price $21.00 AUD
    Sale price $21.00 AUD Regular price
  • Fleetguard FF5229 Fuel Filter – Spin-on
    Vendor:
    Fleetguard

    FF5229 Fuel Filter- Spin-on

    2 in stock
    Regular price $22.70 AUD
    Sale price $22.70 AUD Regular price

Which filter do I need for each system?

Start with the system, then match the part number off the old filter.

What does a micron rating actually mean?

It's the particle size a filter is designed to capture, but the number alone doesn't tell the whole story. A nominal rating means the filter catches a share of particles at that size, while an absolute or Beta-rated figure comes from a standard efficiency test. Compare like with like, and when an efficiency figure is quoted, check which test it refers to.

Can I use an aftermarket filter instead of the dealer part?

Yes, provided it's built to the original specification. Using a non-genuine filter doesn't automatically void a manufacturer's warranty in Australia, as long as the part is fit for purpose and fitted correctly. What matters is that the micron rating, bypass setting, anti-drain valve and dimensions match, so check the OEM manual for specs and service intervals.

Servicing a whole machine? 4WD and truck filter kits group the filters for one service, and bulk fuel and lube filtration handles storage tanks and service trucks. Can't find your number? Send it through and we'll check it.

How do I find the right filter for my machine?

Search the number off the filter you're taking out, or the OEM part number from your parts book. Every filter page carries a cross-reference list, so a Caterpillar, Komatsu, John Deere, Fleetguard or Donaldson number brings up the equivalent we list, even when the brand on the box is different.

We sell the filter makers' brands rather than dealer-branded parts, and the OEM numbers are on each page. The Baldwin LL1626-2 lists Caterpillar 3I0913, and the Fleetguard AF26397 lists John Deere AT519883 alongside Deutz, Liebherr and Volvo numbers.

Then confirm it on the product page before you order:

  • Cross References tab: the OEM and aftermarket numbers the element replaces.
  • Technical Specification tab: dimensions and seal type, so you can check them against the old filter with a tape measure.
  • Matched parts: where the maker lists one, the page names the secondary or inner element that goes with it.

If your number doesn't come up, send it to us with the machine's make, model and serial number and we'll match it.

Which filter section do I need?

Work in by the system the filter protects. Each section holds the elements for that system across the brands we carry.

Servicing a 4WD or truck in one go? 4WD and truck filter kits put the service filters for a specific vehicle under one kit number. Filtering diesel or oil at the storage tank or dispenser is a separate job: see bulk fuel and lube filtration.

Baldwin, Fleetguard, Donaldson or Sakura: does the brand matter?

Less than the fit. The brands we carry cross-reference to each other across most applications, so on most machines the right filter is the one that matches your housing and your number, whichever name is on the box. Brand does steer the choice in a few places:

  • Proprietary air systems: PowerCore is Donaldson's and Direct Flow is Fleetguard's, and their elements fit only their own housing families. See Direct Flow and PowerCore air filters.
  • Light vehicles and 4WDs: Sakura catalogues its filters by vehicle make and model, which is often the quicker route for utes, 4WDs and light trucks, and its service kits sit in 4WD and truck filter kits.
  • Breadth: Baldwin (Parker) is the largest share of our range, so it's often where an unusual or older number lands.

Whichever brand you choose, check the dimensions and seal type on the product page against the filter you're taking off.

The cross-reference shows a number that's slightly different from mine. Is it the same filter?

Not always. Prefixes and suffixes carry meaning, and two real parts can differ by a couple of characters.

  • Performance suffixes: Baldwin's XP marks a nano media version of a standard element, and both numbers are real parts. See XP air filters.
  • Sets: a number such as PA1661(3) is a set of three elements, not one.
  • OEM prefixes: Mack catalogues Fleetguard parts with a 5839 prefix, so 5839AF25090 points to Fleetguard AF25090.
  • Shared numbers across makes: Caterpillar and Mitsubishi built machines together and share some part numbers, so a number that returns nothing under one badge can return the part under the other. The LL1636-FN lists 3473004500 under both.

Measure the old filter and compare it with the Technical Specification tab before you order. Elements in the same family often share two dimensions and differ on the third, and that one check is what catches a near miss.

Can we stock one filter that fits several of our machines?

It's not recommended, even where one filter appears to fit in place of another. Donaldson's guidance is that filter makers advise against consolidating filters, because each filter is designed to match a specific OEM filter. When a filter is updated to keep pace with the OEM part it replaces, it can stop being a valid substitute for the other machine's filter.

Stock the filter listed for each machine, found by its OEM number through the cross-reference. If the aim is fewer separate orders, our service kits put each machine's full set of filters under one part number.

Is a lower micron number always the better filter?

No. For liquid filters, a micron rating only means something alongside the efficiency it was measured at. Two filters both rated at 5 microns can perform very differently: one at 99% efficiency removes 99% of particles 5 microns and larger, while one at 50% removes about half and can let up to 50 times more contamination through.

A finer filter also collects more, so it can reach its dirt-holding capacity sooner and may need changing more often than a coarser one. Donaldson's guidance is that a filter with very high efficiency can lose enough dirt-holding capacity to shorten its life and send the system into by-pass, so the right filter balances efficiency and capacity for the job.

Donaldson's conversion from Beta ratio to efficiency at the stated size: Beta 2 is 50%, Beta 10 is 90%, Beta 20 is 95%, Beta 75 is 98.7% and Beta 1000 is 99.9%.

When you compare fuel, lube or hydraulic filters, compare the micron size and the efficiency (or Beta ratio) together, quoted to a recognised test standard. Air filters are rated differently again, by efficiency to ISO 5011; see air filters.

What's the difference between a spin-on filter and a cartridge element?

A spin-on is a sealed can that screws onto the filter head, with the media, housing and gasket replaced as one unit. A cartridge element is the media only, fitted inside a housing or bowl that stays on the machine. Look at what you're removing: if the whole can comes off, you need a spin-on; if you open a housing and lift out an element, you need an element.

They aren't interchangeable on the same head, so each section splits them: