Brake Fluids (7)

Brake fluid for hydraulic brake and clutch systems in cars, 4WDs, motorcycles, trucks and performance vehicles. Most brake fluids are glycol-based and rated to US DOT standards, DOT 3, DOT 4 and DOT 5.1, which set minimum boiling points for fresh fluid and for fluid that has absorbed moisture. That moisture is the problem: glycol fluid draws water from the air through hoses and seals over time, lowering its boiling point and corroding components from the inside.

Use the rating printed on the reservoir cap or in the handbook, and never go below it. Old fluid shows up as a soft pedal and brake fade on a long descent or a hard stop with a load on, which is the worst possible time. The guide below covers ratings and change intervals.

Brake Fluids

7 products

  • Valvoline 0970.88 Clear DOT4 Brake Fluid 2.5L
    Vendor:
    Valvoline

    0970.88 Clear Super Performance DOT4 Brake Fluid 2.5L

    2 in stock
    Regular price $55.90 AUD
    Sale price $55.90 AUD Regular price
  • Valvoline 0971.88 Clear DOT3 Brake Fluid 2.5L
    Vendor:
    Valvoline

    0971.88 Clear DOT3 Brake Fluid 2.5L

    3 in stock
    Regular price $53.90 AUD
    Sale price $53.90 AUD Regular price
  • Valvoline 8508 Heavy Duty DOT3 Brake Fluid 500ml
    Vendor:
    Valvoline

    8508 Heavy Duty DOT3 Brake Fluid 500ml

    4 in stock
    Regular price $12.95 AUD
    Sale price $12.95 AUD Regular price
  • Valvoline 8505 Super Performance DOT4 Brake Fluid 500ml
    Vendor:
    Valvoline

    8505 Super Performance DOT4 Brake Fluid 500ml

    4 in stock
    Regular price $12.95 AUD
    Sale price $12.95 AUD Regular price
  • Valvoline 0905.72 VR1 Racing Brake Fluid 500ml
    Vendor:
    Valvoline

    0905.72 VR1 Racing Brake Fluid 500ml

    Regular price $30.95 AUD
    Sale price $30.95 AUD Regular price
  • Valvoline 0903.20 VPS Heavy Duty DOT3 Brake Fluid 20L
    Vendor:
    Valvoline

    0903.20 VPS Heavy Duty DOT3 Brake Fluid 20L

    Regular price $239.00 AUD
    Sale price $239.00 AUD Regular price
  • Valvoline 0900.20 VPS Super Performance DOT4 Brake Fluid 20L
    Vendor:
    Valvoline

    0900.20 VPS Super Performance DOT4 Brake Fluid 20L

    Regular price $329.00 AUD
    Sale price $329.00 AUD Regular price

DOT 3, DOT 4 or DOT 5.1?

Use the rating the vehicle maker specifies, or a higher compatible one. DOT 3, DOT 4 and DOT 5.1 are all glycol-based, with the minimum boiling points rising in that order. DOT 5 is different: it's silicone-based, doesn't mix with glycol fluids, and most ABS systems aren't designed for it. Only use DOT 5 where the system specifies it.

How often should brake fluid be changed?

At the interval in the vehicle's service schedule, or sooner if testing shows moisture. Because glycol fluid absorbs water steadily, it degrades even when the vehicle is parked. A brake fluid tester or test strips give a quick check, while colour alone isn't a reliable guide. Workshops that test fluid at every service catch the problem long before the pedal does.

Handling and storing brake fluid

  • Keep containers sealed: an opened bottle keeps absorbing moisture.
  • Never reuse bled fluid.
  • Wipe spills straight away, as glycol brake fluid damages paint.
  • Don't mix silicone and glycol fluids.
  • Use a high-boiling fluid for towing, mountain driving and track use, where the system allows it.

Doing a full brake job? Grab brake parts cleaner and keep spill kits and absorbents handy in the bay. Unsure of a system's spec? Ask us.

Do I need DOT 3 or DOT 4 brake fluid?

Use the class printed on the master cylinder reservoir cap or in the manual. Hydraulic clutch systems take the class the manual specifies, and Valvoline rates these fluids for clutch use where DOT 3 or DOT 4 is called for.

DOT 4 has higher minimum boiling points than DOT 3 when fresh and after it has absorbed moisture. The higher boiling point is what holds a firm pedal under sustained heavy braking, such as towing or long descents. Valvoline rates its DOT 4 fluids for brakes operating under extreme and heavy-duty conditions.

Buy by pack: 500mL for a top-up or single bleed, 2.5L for a full flush, and 20L for a workshop.

Do I need racing brake fluid?

Only for track days, motorsport or road vehicles that genuinely overheat their brakes. VR1 Racing Brake Fluid has a dry boiling point of 317 °C and a wet boiling point of 218 °C, well above the DOT 4 minimums.

Racing fluid earns that margin only while it's fresh, so flush it before each event. For trucks, utes and machinery that work hard on the road, a DOT 4 such as Super Performance DOT 4 is the practical step up from DOT 3. VR1 is a glycol fluid compatible with standard road systems, so you can return to normal fluid at the next service.

Can I use DOT 4 in a car or truck that specifies DOT 3?

Yes. DOT 4 can go where DOT 3 is specified, but not the other way around. Valvoline's DOT 4 fluids are compatible with all non-petroleum (polyglycol) brake fluids, so a DOT 4 top-up or flush in a DOT 3 system is fine.

Don't put DOT 3 into a system that specifies DOT 4. It has lower boiling points than the system was designed around. Workshops that service a mix of vehicles often standardise on DOT 4 in 20L for that reason.

What must never go into a brake system?

Petroleum products, water, and silicone DOT 5 fluid.

  • Petroleum: engine oil, ATF, hydraulic oil or a contaminated container. Valvoline warns that contaminating brake fluid or brake components with petroleum, oil, other fluids or water can cause brake failure.
  • Silicone DOT 5: all of our brake fluids are glycol-based, and a silicone DOT 5 fluid must not be mixed into a glycol system.
  • Dirt: clean the reservoir cap and surrounding area before opening, and don't open the master cylinder in rain or airborne dust.

Use a clean, dedicated container or bleeder for brake fluid only.

How long does brake fluid keep once it's opened?

Not long if the cap is left off. Brake fluid absorbs moisture from the air, and that lowers its boiling point and its effectiveness. Reseal the container immediately after use and store it somewhere dry.

Unopened, Valvoline gives a shelf life of up to 2 years from the date of manufacture.

If you only do the occasional top-up, the 500mL bottles waste less than a part-used 2.5L sitting on the shelf. For a 20L workshop container, keep it sealed between draws.