OptiAir Series (20)

Fleetguard OptiAir air cleaners are compact plastic housings with a built-in pre-cleaning stage that spins coarse dust out before the media does the fine filtration. Dust drops out through a vacuator valve as the engine runs, so the element sees less of the load. They're used on trucks, tractors, gensets and off-highway engines where bay space is tight but dust is still a problem. Size on the engine's airflow first, then choose the outlet layout and whether you want a safety element. Undersized housings run high restriction from new and go through elements fast. Oversized ones can leave the pre-cleaner short of the air speed it needs to separate dust. Read the sizing notes below before choosing.

OptiAir Series

20 products

  • Fleetguard AH19474 OptiAir 400 Series Air Housing, 38-102 cfm
    Vendor:
    Fleetguard

    AH19474 OptiAir 400 Series- Primary Filter, Straight Outlet, 38-102 cfm

    1 in stock
    Regular price $146.00 AUD
    Sale price $146.00 AUD Regular price
  • Fleetguard AH19481 OptiAir 1300 Series – Primary & Secondary, Straight Outlet, 400-954 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19481 OptiAir 1300 Series- Primary & Secondary, Straight Outlet, 400-954 cfm

    Regular price $495.10 AUD
    Sale price $495.10 AUD Regular price
  • Fleetguard AH19480 OptiAir 1300 Series – Primary Filter, Straight Outlet, 450-1171 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19480 OptiAir 1300 Series- Primary Filter, Straight Outlet, 450-1171 cfm

    Regular price $520.50 AUD
    Sale price $520.50 AUD Regular price
  • Fleetguard AH19490 OptiAir 800 Series – Primary & Sec, 90 deg Outlet, 100-266 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19490 OptiAir 800 Series- Primary & Sec, 90 deg Outlet, 100-266 cfm

    Regular price $279.00 AUD
    Sale price $279.00 AUD Regular price
  • Fleetguard AH19491 OptiAir 800 Series – Primary Filter, 90 deg, 130-330 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19491 OptiAir 800 Series- Primary Filter, 90 deg, 130-330 cfm

    Regular price $232.40 AUD
    Sale price $232.40 AUD Regular price
  • Fleetguard AH19260 Primary & Secondary OptiAir 800 Series Air Filter Housing – Straight Outlet, 103-290 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19260 OptiAir 800 Series- Primary & Secondary, Straight Outlet, 103-290 cfm

    Regular price $284.60 AUD
    Sale price $284.60 AUD Regular price
  • Fleetguard AH19261 Primary OptiAir 800 Series Air Filter Housing – Straight Outlet, 175-388 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19261 OptiAir 800 Series- Primary Filter, Straight Outlet, 175-388 cfm

    Regular price $189.80 AUD
    Sale price $189.80 AUD Regular price
  • Fleetguard AH19488 Primary & Secondary OptiAir 600 Series Air Filter Housing – 90 Deg Outlet, 70-175 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19488 OptiAir 600 Series- Primary & Secondary, 90 deg Outlet, 70-175 cfm

    Regular price $197.10 AUD
    Sale price $197.10 AUD Regular price
  • Fleetguard AH19489 Primary OptiAir 600 Series Air Filter Housing – 90 Deg, 85-213 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19489 OptiAir 600 Series- Primary Filter, 90 deg, 85-213 cfm

    Regular price $239.10 AUD
    Sale price $239.10 AUD Regular price
  • Fleetguard AH19477 Primary & Secondary OptiAir 600 Series Air Filter Housing – Straight Outlet, 80-206 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19477 OptiAir 600 Series- Primary & Secondary, Straight Outlet, 80-206 cfm

    Regular price $269.00 AUD
    Sale price $269.00 AUD Regular price
  • Fleetguard AH19476 OptiAir 600 Series Air Housing, 98-240 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19476 OptiAir 600 Series- Primary Filter, Straight Outlet, 98-240 cfm

    Regular price $245.60 AUD
    Sale price $245.60 AUD Regular price
  • Fleetguard AH19496 Primary & Secondary OptiAir 400 Series Air Filter Housing – Straight Outlet, 30-83 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19496 OptiAir 400 Series- Primary & Secondary, Straight Outlet, 30-83 cfm

    Regular price $163.20 AUD
    Sale price $163.20 AUD Regular price
  • Fleetguard AH19485 Primary OptiAir 400 Series Air Filter Housing – 90 Deg Outlet, 35-92 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19485 OptiAir 400 Series- Primary Filter, 90 deg Outlet, 35-92 cfm

    Regular price $165.70 AUD
    Sale price $165.70 AUD Regular price
  • Fleetguard AH19484 Primary & Secondary OptiAir 400 Series Air Filter Housing – 90 Deg Outlet, 25-80 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19484 OptiAir 400 Series- Primary & Secondary, 90 deg Outlet, 25-80 cfm

    Regular price $177.50 AUD
    Sale price $177.50 AUD Regular price
  • Fleetguard AH19486 Primary & Secondary OptiAir 500 Series Air Filter Housing – 90 Deg Outlet, 40-110 cfm
    Sold out
    Vendor:
    Fleetguard

    AH19486 OptiAir 500 Series- Primary & Secondary, 90 deg Outlet, 40-110 cfm

    Regular price $173.30 AUD
    Sale price $173.30 AUD Regular price

How do I size an OptiAir air cleaner?

Match the housing's rated airflow to the engine's. Each model lists an airflow range, and your engine's maximum figure should sit inside it. Within one series, versions with a safety element usually carry a lower rating, so compare the exact configuration.

Straight or 90 degree outlet?

Choose the outlet that gives the cleanest run to the turbo. A 90 degree outlet can save an elbow and a joint in a tight bay, while a straight outlet suits an in-line run. Check the outlet diameter against the pipe or elbow it will join, and make sure the inlet draws cool, clean air rather than heat off the engine or dust thrown up by the wheels.

What maintenance does an OptiAir need?

Check the vacuator valve, the element and the restriction indicator. The valve must stay soft and point down so dust can escape. Replace elements on restriction or schedule with the matching OptiAir element, since other elements won't seal in the housing.

  • Engine airflow against the model rating
  • Primary-only or primary and safety
  • Outlet direction and size
  • Mounting and service clearance
  • Vacuator valve condition

Keep a spare vacuator valve on hand, fit a restriction indicator, compare other air cleaner housings, or send us your engine's airflow.

Why does one OptiAir series have four different airflow ratings?

Because the outlet and the safety element both cost flow capacity. The 400, 500, 600 and 800 Series each come in four versions: straight or 90 degree outlet, primary only or primary and secondary. The 1100 and 1300 Series come in straight outlet only. The straight, primary-only version carries the highest maximum rating; adding a safety element or a 90 degree outlet lowers it.

In the 400 Series, for example, the straight primary-only AH19474 is rated 1.1–2.9 m³/min and the 90 degree primary-and-secondary AH19484 0.7–2.3. Size to the version you are actually buying.

Does two-stage mean the OptiAir has a safety element?

No. Two-stage describes the pre-cleaning built into every OptiAir: a first stage spins out coarse dust before the air reaches the media, which does the fine filtration. Fleetguard credits that design with longer filter life and lower restriction in a smaller housing.

The safety element is a separate choice. Only the primary-and-secondary versions take one, so if you want it, check the title says Primary & Secondary before you order.

Which elements does my OptiAir take, and what else should I order with it?

Read the series number on the housing, then use the table below: it names the primary and safety element for every OptiAir housing we list, with the element links. Some housings take a primary only and some take a primary and secondary, so check yours before ordering the pair.

  • Not online: the AF25960 primary and AF25961 safety for the 800 Series, and the safety elements for the 400 (AF26167) and 600 (AF26118) Series. Send us the housing number and we'll supply them.
  • Dust ejection valve: we list Fleetguard's OptiAir valve 3946457S. Fleetguard lists more than one dust ejection valve across the OptiAir range, so check its number against the valve on your housing.
  • Restriction indicator: on the bigger series an element loading up doesn't announce itself. If the housing has an indicator port, see restriction indicators.

Which machines use OptiAir housings?

Donaldson's OptiAir replacement-filter guide ties each series to these machines:

  • 400 Series: Bobcat loaders
  • 500 Series: Carrier units
  • 600 Series: John Deere skid steers
  • 800 Series: Hyster and Yale lift trucks, Caterpillar and JLG telehandlers, Ingersoll Rand compressors
  • 1100 Series: John Deere loaders and excavators
  • 1300 Series: John Deere excavators

Replacing a housing on one of these? Match the series, the outlet style and whether the old unit had a safety element.