Full View Replacement Bowls (5)

Full View replacement bowls are the clear dust bowls for Donaldson Full View pre-cleaners, sold separately so a cloudy, cracked or knocked bowl can be swapped without replacing the whole unit. They're a routine spare for farms and contractors running Full View units on tractors, headers and other ag gear. Each bowl suits a band of pre-cleaner sizes, so match it to the assembly it's going on, and check the part number on the pre-cleaner where two bands overlap. A hazed bowl hides the dust level, so it gets emptied late or not at all, and the air filter takes the overflow. A cracked bowl is worse, because it can leak or drop off and leave the intake open.

Full View Replacement Bowls

5 products

  • Donaldson P016330 Clear Pre-cleaner Bowl – Suits 3- 4.5 Inch Pre-cleaner Assembly
    Vendor:
    Donaldson

    P016330 Clear Pre-cleaner Bowl, suits 3- 4.5" Pre-cleaner Assembly

    3 in stock
    Regular price $38.80 AUD
    Sale price $38.80 AUD Regular price
  • Donaldson P020227 Clear Pre-cleaner Bowl – Suits 2- 3 Inch Pre-cleaner Assembly
    Vendor:
    Donaldson

    P020227 Clear Pre-cleaner Bowl, suits 2- 3" Pre-cleaner Assembly

    2 in stock
    Regular price $23.60 AUD
    Sale price $23.60 AUD Regular price
  • Donaldson P020344 Clear Pre-cleaner Bowl – Suits 4- 5 Inch Pre-cleaner Assembly
    Vendor:
    Donaldson

    P020344 Clear Pre-cleaner Bowl, suits 4- 5" Pre-cleaner Assembly

    2 in stock
    Regular price $45.70 AUD
    Sale price $45.70 AUD Regular price
  • Donaldson P020115 Clear Pre-cleaner Bowl – Suits 1.75- 2 Inch Pre-cleaner Assembly
    Vendor:
    Donaldson

    P020115 Clear Pre-cleaner Bowl, suits 1.75- 2" Pre-cleaner Assembly

    2 in stock
    Regular price $19.40 AUD
    Sale price $19.40 AUD Regular price
  • Donaldson P158324 Clear Pre-cleaner Bowl – Suits 6-7 Inch Pre-cleaner Assembly
    Vendor:
    Donaldson

    P158324 Clear Pre-cleaner Bowl, suits 6-7" Pre-cleaner Assembly

    1 in stock
    Regular price $120.10 AUD
    Sale price $120.10 AUD Regular price

How do I pick the right replacement bowl?

Match the bowl to the pre-cleaner assembly, not the intake pipe alone. Each bowl lists the range of Full View sizes it fits. If your unit sits at the edge of two ranges, the part number on the pre-cleaner body or the old bowl settles it. When fitting, seat the new bowl evenly so it doesn't leak air or rattle loose on rough ground.

Why do clear bowls go cloudy?

Sunlight, dust abrasion and some cleaning chemicals all haze clear plastic over time. Wash bowls with water and a mild detergent rather than solvents or harsh degreasers, which can craze the surface.

When should a bowl be replaced?

As soon as it's cracked, crazed or too cloudy to read. A bowl that can't show the dust level defeats the purpose of a clear pre-cleaner, and a cracked one can let go at the worst moment. Keeping a spare on the shelf for each size you run means the machine doesn't sit waiting.

  • Full View assembly size or part number
  • Fit range listed on the bowl
  • Condition of the old bowl and its mounting
  • A spare for each size you run

Need the whole unit? See Full View pre-cleaners, or compare all pre-cleaners. Send us a photo if the part number has faded.

Which bowl fits my Full View pre-cleaner?

Match the bowl to the pre-cleaner part number, not just the outlet size:

If your Full View number isn't on this list, send it to us and we'll match the bowl.

Why do two Full Views with the same outlet take different bowls?

Because the bowl matches the body, not the outlet. The 51 mm H002040 takes the 139.2 mm P020115, while the 51 mm Heavy Duty H001823 takes the 184 mm P020227. The same happens at 76 mm: the H001249 takes P020227, and the Heavy Duty H000820 takes the 266.7 mm P016330.

Ordering by the size range in the bowl's title alone can land you the wrong bowl, so check the pre-cleaner part number.

When should I replace the bowl?

When you can no longer see the dust level through it, or it's cracked. A hazed bowl defeats the whole point of a Full View, the at-a-glance check, and a cracked or chipped one can stop the pre-cleaner sealing. Bowls are sold on their own, so there's no need to replace the whole pre-cleaner.