Fuel Treatments & Biocides (1)

Fuel treatments and diesel biocides deal with problems that start inside a vehicle or storage tank: water, microbial growth and fuel that has sat too long. Diesel bug, the bacteria, yeasts and moulds that live where water meets fuel, forms slime and sludge that blocks filters and can corrode tanks from the inside. Farmers, fleet depots, marine users and anyone holding bulk diesel are most exposed.

The choice depends on what is actually wrong, so test for water and microbial growth before you dose, then match the treatment to the tank volume. Dosing without draining the water only buys time, because the growth comes back. Test, drain, treat, then change the filters. More on causes and treatment types is below.

Fueltreat – BC-250-10 – Diesel Fuel Biocide 10L – front view

1 product

  • SAR-GEL AF-SG-FT0001 BLUE water finding paste in a 28g tube for detecting water in fuel storage tanks
    Vendor:
    SAR-GEL

    AF-SG-FT0001 SAR-GEL BLUE Water Finding Paste, Fuel Tanks, 28g Tube

    12 in stock
    Regular price $35.20 AUD
    Sale price $35.20 AUD Regular price

What causes diesel bug?

Water in the tank. It gets in through condensation in part-full tanks, contaminated deliveries, and worn seals on fill points and vents. Microbes live in that water layer and feed on the fuel above it. Warm weather and long storage speed growth up, and biodiesel blends hold more water than straight diesel.

How do I know if my tank needs treating?

Test it rather than guess. Water finding paste on a dipstick changes colour where it meets water, showing how deep the water layer is. Microbial test kits show whether growth is present and how heavy it is, and a second test confirms whether the dose worked. Warning signs include dark slime in filter bowls, filters blocking well before their interval and black or brown water draining from separators.

Biocide, conditioner or stabiliser?

Each one does a different job, and many tanks need more than one:

  • Biocide: kills bacteria and fungi. Many list a shock dose for a contaminated tank and a lower maintenance dose.
  • Fuel stabiliser or conditioner: slows oxidation so stored fuel stays usable longer.
  • Test kits and water finding paste: confirm the problem before you spend on a fix.
  • Tank volume: dose to the litres in the tank, not the tank's rated size.
  • Fuel type and equipment: check the label for diesel, biodiesel blend or petrol suitability.

After a shock dose, dead growth can still break loose and block filters, so carry spares and expect an early change.

Replace loaded filters with spin-on fuel water separators or other fuel filters, and protect bulk tanks with bulk fuel filtration. Ask us about dosing a large tank.

Should I use BC-250 or FT-400?

BC-250 is for vehicles, boats, machinery and smaller storage tanks, and comes in 100ml, 1L and 10L bottles. FT-400 is a concentrate for bulk storage tanks holding tens of thousands of litres. As a rough guide, tanks under 40,000L are easier to dose with BC-250.

How much diesel biocide do I use?

BC-250: 100ml per 100L for vehicles, or 1L per 1,000L to start then 1L per 2,000L of incoming fuel for storage tanks. FT-400: 10L per 40,000L for a contaminated system, then 10L per 90,000L of fresh diesel. Dose FT-400 for the tank's full capacity, not just the top-up.

How do I check my tank for diesel bug?

Draw a sample from the very bottom of the tank, where water and growth collect. A dark or slimy water layer is a warning sign. A MicrobMonitor2 test on that sample gives an actual microbe count, so you know how contaminated the tank is rather than guessing.

Can I test fuel that has already been treated with biocide?

Yes. MicrobMonitor2 results are unaffected by biocides, DiEGME and other fuel additives, so the test can be used during and after a treatment to confirm the biocide has worked.

What are the signs of diesel bug?

Repeated blocked fuel filters, especially soon after a delivery, are the most common sign. Others include dark slime or sludge in filter bowls or drain samples, a hazy layer between fuel and water, rough running and loss of power. Left untreated, it leads to injector and injection pump damage and corrosion of the tank itself.

What should I do if my tank is already contaminated?

Drain off the free water first, then treat the tank at the clean-up dose for its full volume. Expect killed growth to load the filters for a short while, so have spares ready. Where water is suspended through the fuel or there is heavy sediment, the fuel may also need cleaning through fine water and particle filtration.

How do I prevent diesel bug?

Drain the tank sump regularly and keep caps, seals and breathers in good order. Sample the tank bottom routinely, test tanks and lines for integrity once a year, dose fuel with a biocide such as BC-250 or FT-400 as it goes into the tank, and fit good fuel water separators on the equipment.