T.R.A.P Breathers (16)

T.R.A.P breathers filter the air a fuel, oil or hydraulic tank draws in through its vent, keeping dust and moisture out as the fluid level drops and the tank breathes with temperature changes. Donaldson developed the T.R.A.P design for bulk storage tanks and reservoirs, anywhere a vent would otherwise be open to the weather. Thread and airflow are the specs to get right. NPT and BSP threads don't cross over, and a breather rated below your pump-out rate can't let air in fast enough. An open or undersized vent pulls in dirt and humid air, and that water ends up in your fuel or oil, loading filters and feeding corrosion. Check the vent fitting first, then size the airflow.

T.R.A.P Breathers

16 products

  • Donaldson P567392 T.R.A.P Breather – Glass-Filled Nylon, 1/4 NPT, Mini, 3um, 85 Lpm
    Vendor:
    Donaldson

    P567392 T.R.A.P Breather, Glass-Filled Nylon, 1/4 NPT, Mini, 3um, 85 lpm

    2 in stock
    Regular price $59.90 AUD
    Sale price $59.90 AUD Regular price
  • Donaldson P565857 T.R.A.P Breather – Epoxy-coated Steel, 3/4 NPT, 3um, 708 Lpm
    Vendor:
    Donaldson

    P565857 T.R.A.P Breather, Epoxy-coated Steel, 3/4 NPT, 3um, 708 lpm

    1 in stock
    Regular price $99.50 AUD
    Sale price $99.50 AUD Regular price
  • Donaldson P566037 T.R.A.P Breather – Epoxy-coated Steel, G3/4, 3um, 708 Lpm
    Vendor:
    Donaldson

    P566037 T.R.A.P Breather, Epoxy-coated Steel, G3/4, 3um, 708 lpm

    2 in stock
    Regular price $99.50 AUD
    Sale price $99.50 AUD Regular price
  • Donaldson P567390 Mini T.R.A.P. hydraulic reservoir breather with 3/8 NPT thread in black
    Vendor:
    Donaldson

    P567390 Breather, Trap

    Regular price $59.80 AUD
    Sale price $59.80 AUD Regular price
  • Donaldson P506159 T.R.A.P Breather Assembly – Brass G1-1/2 Connection, 3um, Diesel and Oil Tanks Up to 500 Lpm
    Vendor:
    Donaldson

    P506159 T.R.A.P Breather Assembly, Brass G1-1/2 Connection, 3um, Diesel & Oil Tanks up to 500 lpm

    Regular price $564.00 AUD
    Sale price $564.00 AUD Regular price
  • Donaldson P923075 TRAP breather element in blue urethane for moisture and particulate control
    Vendor:
    Donaldson

    P923075 T.R.A.P Breather Element, Urethane, 1-1/4" BSP, 3um, 500 lpm

    1 in stock
    Regular price $256.10 AUD
    Sale price $256.10 AUD Regular price
  • Donaldson P564669 T.R.A.P Breather – Glass-Filled ABS, 1" NPT, 3um, 1274 Lpm
    Vendor:
    Donaldson

    P564669 T.R.A.P Breather, Glass-Filled ABS, 1" NPT, 3um, 1274 lpm

    Regular price $158.80 AUD
    Sale price $158.80 AUD Regular price
  • Donaldson P566151 T.R.A.P Breather – Glass-Filled ABS, 1 Inch NPT, 3um, 1274 Lpm
    Vendor:
    Donaldson

    P566151 T.R.A.P Breather, Glass-Filled ABS, 1" NPT, 3um, 1274 lpm

    1 in stock
    Regular price $106.70 AUD
    Sale price $106.70 AUD Regular price
  • Donaldson P767031 T.R.A.P Breather – Glass-Filled Nylon, G1, 10um, 300 Lpm
    Vendor:
    Donaldson

    P767031 T.R.A.P Breather, Glass-Filled Nylon, G1, Non-Pressurised, 10um, 300 lpm

    Regular price $55.20 AUD
    Sale price $55.20 AUD Regular price
  • Donaldson P767029 T.R.A.P Breather – Glass-Filled Nylon, G3/4, 10um, 300 Lpm
    Vendor:
    Donaldson

    P767029 T.R.A.P Breather, Glass-Filled Nylon, G3/4, Non-Pressurised, 10um, 300 lpm

    Regular price $55.20 AUD
    Sale price $55.20 AUD Regular price
  • Donaldson P767027 T.R.A.P Breather – Glass-Filled Nylon, G1/2, 10um, 300 Lpm
    Vendor:
    Donaldson

    P767027 T.R.A.P Breather, Glass-Filled Nylon, G1/2, Non-Pressurised, 10um, 300 lpm

    Regular price $55.20 AUD
    Sale price $55.20 AUD Regular price
  • Donaldson P767025 T.R.A.P Breather – Glass-Filled Nylon, G1/2, Anti-rollover Valve, 10um, 200 Lpm
    Vendor:
    Donaldson

    P767025 T.R.A.P Breather, Glass-Filled Nylon, G1/2, Anti-rollover Valve, 10um, 200 lpm

    Regular price $83.70 AUD
    Sale price $83.70 AUD Regular price
  • Donaldson P767021 T.R.A.P Breather – Glass-Filled Nylon, G1, Pressurisation Valve 0.4 Bar, 10um, 200 Lpm
    Vendor:
    Donaldson

    P767021 T.R.A.P Breather, Glass-Filled Nylon, G1, Pressurisation Valve 0.4 bar, 10um, 200 lpm

    Regular price $78.90 AUD
    Sale price $78.90 AUD Regular price
  • Donaldson P767019 T.R.A.P Breather – Glass-Filled Nylon G3/4, Pressurisation Valve 0.4 Bar, 10um, 200 Lpm
    Vendor:
    Donaldson

    P767019 T.R.A.P Breather, Glass-Filled Nylon, G3/4, Pressurisation Valve 0.4 bar, 10um, 200 lpm

    Regular price $78.90 AUD
    Sale price $78.90 AUD Regular price
  • Donaldson P766646 T.R.A.P Breather – Glass-Filled Nylon, G1, Anti-rollover Valve, 10um, 200 Lpm
    Vendor:
    Donaldson

    P766646 T.R.A.P Breather, Glass-Filled Nylon, G1, Anti-rollover Valve, 10um, 200 lpm

    Regular price $83.70 AUD
    Sale price $83.70 AUD Regular price

How does a T.R.A.P breather work?

It cleans the air passing in and out of the vent. Every litre pumped out of a tank is replaced by outside air, and daily heating and cooling makes a tank exhale and inhale even when it's sitting idle. The breather's media stops dust on the way in. T.R.A.P breathers are designed to hold back moisture from incoming air and release it as the tank exhales, rather than relying on a desiccant cartridge that has to be replaced once it's saturated.

Choosing a tank breather

Match it to the vent, then the flow.

  • Thread standard and size, NPT or BSP, to suit the vent fitting
  • Airflow rating at or above your fastest pump-out or drain rate
  • Micron rating for the cleanliness the fluid needs
  • Valve type: open, anti-rollover for mobile tanks, or a pressurisation valve to limit breathing
  • Body material suited to outdoor use and the fluid
  • Complete breather or replacement element

What goes wrong without a breather?

Water and dirt get in every time the tank breathes. In diesel, water settles out and supports microbial growth at the boundary between fuel and water. In hydraulic and lube oil it shortens oil life and adds to wear. Either way, downstream filters work harder and need changing sooner.

Pair a breather with bulk tank filter kits or bulk oil storage containers, keep stored diesel healthy with fuel treatments and biocides, or contact us for help sizing one.

Why choose a T.R.A.P. breather over a silica gel desiccant breather?

Because it doesn't fill up with water. A desiccant breather's silica gel absorbs moisture until it's saturated, then it has to be replaced. A T.R.A.P. breather strips moisture vapour from the air the tank draws in, then uses the dry air going back out to carry that moisture away, regenerating its water-holding capacity on every cycle.

Donaldson rates that at 3 to 4 times the life of a conventional desiccant breather, across -40°C to 93°C. Every model also filters the incoming air: the 200 and 300 lpm nylon models to 10 micron and the rest to 3 micron, both at 98%.

Which T.R.A.P. breather size do I need for my tank?

Choose by airflow first, then thread. Every litre of fluid that leaves the tank pulls in a litre of air, so the breather's rating has to cover the fastest rate the level changes. On a storage tank, that's the maximum pump-out or fill rate, whichever is higher. Pick a model from the table on this page rated at or above it.

Then match the connection exactly. Several sizes come in NPT and BSP versions, such as P565857 (3/4 NPT) and P566037 (G3/4), so check the thread on the vent before you order.

What do the anti-rollover and pressurisation valve versions do?

They're for tanks that need more than a free vent.

  • Anti-rollover valve (P767025, P766645, P766646): closes if the breather is tipped, so oil can't escape through the vent when a machine tilts or rolls. Use it on mobile equipment that works on slopes.
  • Pressurisation valve (P767019, P767021): set at 40 kPa (0.4 bar), so the tank holds a slight positive pressure before it vents. Fit one only where the machine maker specifies a pressurised reservoir.
  • Non-pressurised (P767027, P767029, P767031): breathes freely, with no valve.

When do I replace a T.R.A.P. breather?

When it's loaded with dirt, not when it's 'full' of water. The media regenerates its water-holding capacity on every outflow cycle, so the change signal is restriction across the breather.

  • P564669 has an electronic indicator, triggered by pressure differential, that flashes red at about 1 psid (0.07 bar) when a change is due.
  • The X-Large P506159 assembly has a visual indicator, and takes P923075 as its replacement element.
  • The other models have no indicator, so inspect them at the machine's scheduled service and replace them sooner in dusty work.

Can I fit a T.R.A.P. breather to a diesel or oil storage tank?

Yes. Donaldson designs T.R.A.P. breathers for mobile and stationary reservoirs, and the X-Large P506159 is a complete brass-bodied assembly made for diesel and oil tanks. It has a G1-1/2 female connection, a relief valve set at 2.32 psi (16 kPa) and a recommended maximum airflow of 500 lpm.

For a smaller tank or a machine reservoir, choose a model from the table on this page by airflow and thread.