Lube Filter Cartridge Elements (174)

Oil filter cartridge elements suit engines with a fixed filter housing, where only the element changes at each oil change and the housing stays on the engine. Many modern diesels in trucks, tractors and machinery use this layout, and the elements come in full-flow and bypass types with cellulose, synthetic or blended media. Many are metal-free, which makes disposal simpler. Type, dimensions and media are the specs to carry over from the old element. A cartridge that's the wrong type, or a few millimetres short, can sit in the housing without sealing and let oil skip the media while the engine runs normally. Use the checklist under the products to confirm the match.

Lube Filter Cartridge Elements

174 products

  • Baldwin P7188 Lube Filter – Cartridge, 30 micron
    Vendor:
    Baldwin

    P7188 Lube Filter- Element, 30 Mic

    Regular price $52.50 AUD
    Sale price $52.50 AUD Regular price
  • Fleetguard LF3319 Lube Filter – Cartridge
    Vendor:
    Fleetguard

    LF3319 Lube Filter- Cartridge

    1 in stock
    Regular price $15.00 AUD
    Sale price $15.00 AUD Regular price
  • Baldwin P7015 Lube Filter – Cartridge
    Vendor:
    Baldwin

    P7015 Lube Filter- Element

    Regular price $45.00 AUD
    Sale price $45.00 AUD Regular price
  • Baldwin P54 Lube Filter – By-Pass, Cartridge, Bail Handle
    Vendor:
    Baldwin

    P54 Lube Filter- By-Pass, Element, Bail Handle

    Regular price $48.00 AUD
    Sale price $48.00 AUD Regular price
  • Baldwin P52 Lube Filter – By-Pass Cartridge, Bail Handle, 25 micron
    Vendor:
    Baldwin

    P52 Lube Filter- By-Pass Element, Bail Handle, 25 Mic

    Regular price $48.00 AUD
    Sale price $48.00 AUD Regular price
  • Donaldson P551005 Lube Filter, Cartridge
    Vendor:
    Donaldson

    P551005 Lube Filter, Cartridge

    Regular price $118.70 AUD
    Sale price $118.70 AUD Regular price
  • Donaldson P550952 black oil filter cartridge for PACCAR and DAF engines with included O-ring seal
    Vendor:
    Donaldson

    P550952 Lube Filter, Cartridge

    Regular price $113.10 AUD
    Sale price $113.10 AUD Regular price
  • Donaldson P550938 Lube Filter, Cartridge
    Vendor:
    Donaldson

    P550938 Lube Filter, Cartridge

    Regular price $54.20 AUD
    Sale price $54.20 AUD Regular price
  • Donaldson P550820 Lube Filter, Cartridge
    Vendor:
    Donaldson

    P550820 Lube Filter, Cartridge

    Regular price $57.20 AUD
    Sale price $57.20 AUD Regular price
  • Donaldson P550812 Lube Filter, Cartridge
    Vendor:
    Donaldson

    P550812 Lube Filter, Cartridge

    Regular price $65.70 AUD
    Sale price $65.70 AUD Regular price
  • Donaldson P550630 lube filter cartridge with pleated paper element and white rubber gasket
    Vendor:
    Donaldson

    P550630 Lube Filter, Cartridge

    Regular price $41.20 AUD
    Sale price $41.20 AUD Regular price
  • Donaldson P550041 lube cartridge filter with cellulose media and included O-ring seals for heavy engines
    Vendor:
    Donaldson

    P550041 Lube Filter, Cartridge

    Regular price $43.00 AUD
    Sale price $43.00 AUD Regular price
  • Donaldson P502352 Lube Filter, Cartridge
    Vendor:
    Donaldson

    P502352 Lube Filter, Cartridge

    Regular price $32.90 AUD
    Sale price $32.90 AUD Regular price
  • Sakura EO-5101 ecological full-flow oil filter cartridge element for Perkins and Caterpillar
    Vendor:
    Sakura

    EO-5101 Lube Filter- Full Flow, Ecological Element

    Regular price $86.50 AUD
    Sale price $86.50 AUD Regular price
  • Sakura EO-13060 ecological oil filter element with dimensions for Hino and Mitsubishi Fuso trucks
    Vendor:
    Sakura

    EO-13060 Lube Filter- Full Flow, Ecological Element

    Regular price $31.40 AUD
    Sale price $31.40 AUD Regular price

How to choose an oil filter cartridge

  • Full-flow or bypass: a bypass element in a full-flow housing won't pass enough oil.
  • Dimensions and end caps: cartridges that look alike can differ slightly, so match by part number, not by eye.
  • Media: synthetic or cellulose. Match the media to your drain interval and the engine maker's spec.
  • Micron rating: where it's listed, stay with the original rating.
  • Seals: use the O-rings supplied with the element, sized for your housing cap.

Where are the valves on a cartridge system?

Often in the housing rather than the filter. On many cartridge systems the bypass valve and anti-drain function are built into the housing or cap, so worn housing valves and seals affect filtration too. Inspect them at each change. Some housings also drain oil back to the sump when the cap comes off, which keeps the job clean.

Changing a cartridge element

Loosen the cap, let the housing drain, then lift out the old element and compare it with the new one before fitting. Replace the cap O-ring every time, lubricate it with clean oil and torque the cap to the figure in the OEM manual. Overtightening a plastic cap can crack it.

Engines with a spin-on head need spin-on oil filters. You can also browse all oil filters or pick up a matching engine oil. If the old element is unmarked, send us the engine details.

Which oil element fits Detroit DD13, DD15 and DD16 engines?

It depends on the engine year. Donaldson list a different lube element for pre-2020 engines and for 2021 and newer.

  • Pre-2020 engines, Detroit A4721800109: Donaldson P551005 or Baldwin P7505, which Donaldson's cross-reference lists against the same Detroit number.
  • 2021 and newer, Detroit A4711800209: not currently listed. Send us the number off the old element and we'll source it.

Doing the fuel filters at the same service? The DD fuel module also changed by engine year; the kits are covered on fuel filter cartridge elements.

How do I tell a full-flow element from a by-pass element?

Read the title, then match the number on the old element. Similar diameters don't mean the same job, and a by-pass element's denser media in a full-flow housing would hold back the oil the bearings need.

  • Full-flow examples: Baldwin P171, and P7505 for Detroit DD13, DD15 and DD16 engines.
  • By-pass examples: Baldwin P41 and PT70, which run in their own housing alongside the full-flow filter.
  • Media: Baldwin's prefixes show it. P and PT are paper elements; T is cotton.

How the two systems work together is covered on lube filters.

Where is the by-pass valve on a cartridge oil filter system?

It depends on the engine. Some housings carry the valve in the engine or housing and take a plain element; others put it in the element itself, so each new element brings a new valve. Our titles show valves where the element carries one, such as the P7132 with a 60 psi (about 414 kPa) valve and the P7505 with an offset by-pass valve. Fit an element with or without a valve to match the original. An element without one, in a housing that relies on it, leaves the engine with no fail-safe if the element blocks.

How do I fit a cartridge oil element so it seals properly?

Seat it by hand and make sure it sits square before you fit the cover, with the seals supplied and a clean housing bore. On short, wide cartridges such as the LF16043, a cocked element can roll its sealing ring as the cover pulls it down.

A rolled seal lets oil bypass the element internally while oil pressure reads normal, and nothing tells you until an oil analysis or a failure.