Grease Pump Accessories (9)

Grease pump accessories are the parts that let an air operated grease pump work properly from a pail or drum: follower plates, drum covers, dispense valves and hose kits. Workshops, service trucks and lube bays use them to build a pump setup or keep an existing one running. Most of these parts are made for a particular pump series and container size, so the pump model is the first thing to confirm, followed by thread type and pressure rating. Without a follower plate, grease cones in the drum and the pump starts sucking air, which looks like a pump fault but isn't. Have your pump model and drum size handy before you order.

Graco 242058 Pro-Shot grease dispense valve with extension and coupler (representative image)

9 products

  • Graco 242056 Pro-Shot Grease Dispense Valve, 1/4" NPT, Coupler & Extension
    Vendor:
    Graco

    242056 Pro-Shot Grease Dispense Valve, 1/4" NPT, Coupler & Extension

    Regular price $353.50 AUD
    Sale price $353.50 AUD Regular price
  • Graco 222072 Hose & Fitting Kit, Fire-Ball 300 50:1 Grease Pumps
    Vendor:
    Graco

    222072 Hose & Fitting Kit, Fire-Ball 300 50:1 Grease Pumps

    Regular price $437.60 AUD
    Sale price $437.60 AUD Regular price
  • Graco 242058 Pro-Shot Grease Dispense Valve, 3/8" NPT, Coupler & Extension
    Vendor:
    Graco

    242058 Pro-Shot Grease Dispense Valve, 3/8" NPT, Coupler & Extension

    Regular price $419.30 AUD
    Sale price $419.30 AUD Regular price
  • Graco 24F901 Follower Plate, 16 kg Pail, Fire-Ball 300 & LD Grease Pumps
    Vendor:
    Graco

    24F901 Follower Plate, 16 kg Pail, Fire-Ball 300 & LD Grease Pumps

    Regular price $183.40 AUD
    Sale price $183.40 AUD Regular price
  • Graco 24F903 Follower Plate, 180 kg Drum, Fire-Ball 300 & LD Grease Pumps
    Vendor:
    Graco

    24F903 Follower Plate, 180 kg Drum, Fire-Ball 300 & LD Grease Pumps

    Regular price $304.10 AUD
    Sale price $304.10 AUD Regular price
  • Graco 200326 Drum Cover, 180 kg Drum, Fire-Ball 300 & 425 Grease Pumps
    Vendor:
    Graco

    200326 Drum Cover, 180 kg Drum, Fire-Ball 300 & 425 Grease Pumps

    Regular price $596.60 AUD
    Sale price $596.60 AUD Regular price
  • Graco 24F906 Drum Cover, 180 kg Drum, LD 50:1 Grease Pumps
    Vendor:
    Graco

    24F906 Drum Cover, 180 kg Drum, LD 50:1 Grease Pumps

    Regular price $354.00 AUD
    Sale price $354.00 AUD Regular price
  • Graco 24H863 Grease Hose Kit, 1.8m, BSPT, LD 50:1 Grease Pumps
    Vendor:
    Graco

    24H863 Grease Hose Kit, 1.8m, BSPT, LD 50:1 Grease Pumps

    Regular price $319.20 AUD
    Sale price $319.20 AUD Regular price
  • Graco 129583 LD Pro-Shot Grease Dispense Valve, 1/4" BSPT
    Vendor:
    Graco

    129583 LD Pro-Shot Grease Dispense Valve, 1/4" BSPT

    Regular price $255.30 AUD
    Sale price $255.30 AUD Regular price

What does a follower plate do?

It sits on top of the grease and moves down as the level drops. The plate wipes the container wall, keeps grease in contact with the pump inlet and stops a cone or channel forming around the pump tube, which would let the pump draw air. It also keeps dirt off the grease surface.

Choosing the right pump accessory

  • Pump series and model the part is made for.
  • Container size: follower plates and covers must match the pail or drum diameter.
  • Thread type on valves and hose kits, BSP or NPT, to match the pump outlet.
  • Pressure rating, at or above the pump's maximum outlet pressure.
  • Dispense valve style: straight valve, valve with coupler, or valve with extension.

Why do I need a drum cover?

A drum cover holds the pump in place and seals the container against dust, water and grit. Contaminated grease goes straight into bearings, so an open drum undoes the point of greasing. Grease pumps run at high pressure, so keep hoses and valves in good condition and replace any that are damaged.

Need the pump itself? See air operated grease pumps. For carts and trolleys, see drum handling, or send us your pump model to confirm the right part.

Which follower plate and drum cover fit our Graco grease pump?

Match both to the pump and the container. Plates and covers are sold separately, and the wrong plate won't seal in the drum.

  • Fire-Ball 300 pail pump 239877: the 24F901 plate for 16 kg pails; Graco's pail package uses the 222059 cover.
  • Fire-Ball 300 drum pump 239888: the 24F903 plate and 200326 cover.
  • LD 50:1 24G608: the 24F903 plate and 24F906 cover. The LD can't draw from the drum without the plate.
  • Fire-Ball 425 205395, 180 kg: the 200326 cover, but not the 24F903; this pump takes the 223846 plate.
  • Fire-Ball 425 205394, 55 kg: the 204574 cover and 223344 plate.
  • Fire-Ball 425 10:1 965124: Graco's typical installation uses the 200326 cover with the 223701 follow plate.

Parts shown without a link are available on request.

Which Pro-Shot dispense valve fits our pump and hose?

Match the valve inlet to the grease hose thread.

  • 242056, 1/4" NPT: screws onto the 1/4" grease hose in the 222072 kit for the Fire-Ball 300 239888, and Graco fits it to the 239877 pail packages.
  • 242058, 3/8" NPT: the same valve for 3/8" hose, such as the 222076 kit Graco supplies with the Fire-Ball 425 205394 and 205395.
  • 129583, 1/4" BSPT: the LD Pro-Shot for the BSPT 24G608, fed by the 24H863 hose kit.

The 242056 and 242058 come with a coupler and rigid extension, are rated to 552 bar and are rebuilt with service kit 243446. The 129583 is rated to 517 bar and goes back to Graco for repair. It has no filter, so the pump needs one at its outlet, and Graco fits a Z-swivel (24H614 in its BSPT packages) between hose and valve to stop the hose kinking. Parts shown without a link are available on request.

Which hose kit fits our Graco grease pump?

The kit is matched to the pump series, and on the LD to whether a reel is fitted.

  • Fire-Ball 300: the 222072 kit supplies the short air and grease hoses at the pump, with 90° swivel adapters for its 3/8" NPT air inlet and 1/4" NPT grease outlet. The Fire-Ball 425 uses the larger 222076 kit.
  • LD 24G608 to a dispense valve: the 24H863 BSPT kit, with a 1.8 m 1/4" ID grease hose and 1.8 m 3/8" ID air hose.
  • LD on the 24F915 cart with a reel: the 24J503, which runs the grease hose from the pump to the reel on the cart frame.

The grease line in both LD kits is rated to 345 bar, below the pump's maximum, and Graco rates its LD grease packages to 345 bar with no more than 7 bar of air. NPT LD pumps take the 24H862 or 24J501. Parts shown without a link are available on request.

What wears on a follower plate, and how do we fit one?

The wiper and the grommet. The wiper seals against the pail or drum wall as the plate follows the grease down, and the pump intake passes through the rubber grommet. Repair kit 25A183 renews both on the 24F901 pail plate, and 25A185 on the 24F903 drum plate.

To fit a plate, set it on the fresh grease and push it down until grease shows at the centre opening, which clears the trapped air, then pass the pump intake through the grommet. Parts shown without a link are available on request.