Grease (9)

Grease for wheel bearings, chassis points, pins, bushes, slewing rings and plant bearings on vehicles, trucks, farm machinery and earthmoving gear. A grease is base oil held in a thickener. The thickener sets water resistance and the temperature the grease can handle, the base oil viscosity sets load-carrying ability, and additives such as EP agents or moly add protection for heavy, slow-moving joints.

The NLGI grade describes consistency, with NLGI 2 the most common for general greasing and softer grades used in centralised lube systems. Pick the wrong grease and it runs out of a hot wheel bearing, washes off a pin in the wet or gets squeezed out of a loaded joint, leaving it dry. The notes below explain thickeners and grades.

Grease

9 products

  • Valvoline 0707.82 Valplex EP Extreme Pressure Grease 450g
    Vendor:
    Valvoline

    0707.82 Valplex EP2 Grease, Extreme Pressure Lithium Complex 450g

    41 in stock
    Regular price $14.60 AUD
    Sale price $14.60 AUD Regular price
  • Valvoline 0707.65 Valplex EP Extreme Pressure Grease 20kg
    Vendor:
    Valvoline

    0707.65 Valplex EP2 Grease, Extreme Pressure Lithium Complex 20kg

    1 in stock
    Regular price $389.00 AUD
    Sale price $389.00 AUD Regular price
  • Valvoline 0706.82 Valplex M 3% Moly Grease 450g
    Vendor:
    Valvoline

    0706.82 Valplex M All Purpose Grease, Lithium Complex with 3% Moly 450g

    24 in stock
    Regular price $15.60 AUD
    Sale price $15.60 AUD Regular price
  • Valvoline 0770.82 Optimum Choice Partial Synthetic Grease 450g
    Vendor:
    Valvoline

    0770.82 Optimum Choice Partial Synthetic, Lithium Complex Grease, High Temperature, Severe Service 450g

    34 in stock
    Regular price $17.60 AUD
    Sale price $17.60 AUD Regular price
  • Valvoline 0749.67 No Melt No 2 Wheel Bearing Grease 2.5kg
    Vendor:
    Valvoline

    0749.67 Wheel Bearing Grease, Bentone Inorganic Thickener, High Temperature, No Melt 2.5kg

    4 in stock
    Regular price $68.80 AUD
    Sale price $68.80 AUD Regular price
  • Valvoline 0770.65 Optimum Choice Partial Synthetic Grease 20kg
    Vendor:
    Valvoline

    0770.65 Optimum Choice Partial Synthetic, Lithium Complex Grease, High Temperature, Severe Service 20kg

    Regular price $450.00 AUD
    Sale price $450.00 AUD Regular price
  • Valvoline 0707.67 Valplex EP 2.5kg
    Vendor:
    Valvoline

    0707.67 Valplex EP2 Grease, Extreme Pressure Lithium Complex 2.5kg

    Regular price $68.80 AUD
    Sale price $68.80 AUD Regular price
  • Valvoline 0706.65 Valplex M 3% Moly Grease 20kg
    Vendor:
    Valvoline

    0706.65 Valplex M All Purpose Grease, Lithium Complex with 3% Moly 20kg

    Regular price $420.85 AUD
    Sale price $420.85 AUD Regular price
  • Valvoline 0706.67 Valplex M 3% Moly Grease 2.5kg
    Vendor:
    Valvoline

    0706.67 Valplex M All Purpose Grease, Lithium Complex with 3% Moly 2.5kg

    3 in stock
    Regular price $71.80 AUD
    Sale price $71.80 AUD Regular price

What does the NLGI grade mean?

It's a measure of how stiff the grease is. The scale runs from very fluid 000 up to a firm 6. NLGI 2 is the everyday grade for grease guns and most bearings, while softer 0, 00 and 000 grades pump more easily through long lines in automatic lubrication systems and suit some enclosed gearboxes.

Which grease thickener do you need?

Match the thickener to heat, water and load. Lithium complex is a good general choice for vehicles and plant. Calcium sulphonate greases are known for water resistance and suit wet, muddy conditions. Bentone (clay) greases don't melt in the usual sense, which suits very hot bearings. Food processing equipment needs an NSF H1 registered grease.

Can you mix greases?

Not always. Some thickeners are incompatible and can soften or harden when mixed, so the grease runs out or stops lubricating. When you change grease type, purge the old grease from the point until fresh grease appears.

  • Thickener type for temperature and water exposure.
  • NLGI grade for the application and dispensing method.
  • EP or moly additives for heavy, shock-loaded or slow-moving joints.
  • Base oil viscosity: heavier for slow, loaded bearings, lighter for high speed.
  • NLGI GC-LB certification for automotive wheel bearings and chassis.
  • Pack type to suit your grease gun, pump or auto-lube system.

Pair the grease with the right grease gun or air-operated grease pump. Machines with lots of points? Look at automatic lubrication systems. Ask us which grease suits the job.

Which grease should I use on excavator, loader and tractor pins and bushes?

All three of our lithium complex greases are NLGI 2 extreme pressure (EP) greases made for loaded pins, so choose on the conditions the machine works in.

  • Valplex EP2: Valvoline lists it for oscillating bucket pins, universal joints and slow, heavily loaded plain bearings on earthmoving and farm gear. It is the default pick for general pin and bush greasing.
  • Valplex M: adds 3% moly to build film strength. Valvoline notes the moly keeps lubricating even when prolonged high-pressure washing strips some of the carrier grease, so it suits machines that get hosed down or work in hostile conditions.
  • Optimum Choice: a partial synthetic built for extended service intervals and severe duty in construction, mining and agriculture. It has the heaviest base oil of the three and a Timken OK load of 60 kg against 23 kg and 26 kg for the Valplex greases, which is what you want on hot, hard-working pins you'd rather grease less often.

Whichever you choose, stay with it. Every Valvoline grease data sheet says not to mix greases.

Which grease do I need for truck and trailer wheel bearings, chassis points and fifth wheels?

Valplex EP2 covers all three. Valvoline lists it for chassis points on extended lube intervals and for wheel bearings with drum or disc brakes, and particularly recommends it for fifth wheels. It is also the only grease in our range whose data sheet lists NLGI service category GC-LB, the automotive rating for wheel bearings (GC) and chassis points (LB), so use it wherever the vehicle maker calls for GC-LB.

Optimum Choice is Valvoline's pick for on-highway fleets on extended service intervals, with chassis, steering, fifth wheel, water pump and wheel bearing points all listed.

Don't use the No Melt wheel bearing grease here. Its data sheet says it is not recommended for truck or semi-trailer wheel bearings.

When should I use the No Melt wheel bearing grease instead of a lithium complex grease?

Use it for passenger car and light vehicle wheel bearings, particularly behind disc brakes, and for bearings in equipment that runs hot. Its bentone clay thickener has no dropping point, so it softens rather than melting out of a hot hub, and Valvoline rates it satisfactory up to 180°C.

Two limits to check before you order:

  • It is not recommended for truck or semi-trailer wheel bearings. Use Valplex EP2 there.
  • Clay and lithium complex thickeners are different chemistry, and Valvoline says not to mix greases. Wash the old grease out of the bearing before repacking with No Melt, and again if you switch back.

It comes in a 2.5kg tub for hand-packing bearings.

Which grease holds up best on machines that get washed down or work in the wet?

Valplex M has the best water washout result of our Valvoline greases, losing under 4% in the ASTM D1264 test at 79°C, and its moly keeps lubricating if pressure washing strips some of the grease. Optimum Choice is close behind at 5.0%, on a heavier base oil that suits slow, heavily loaded points. Valplex EP2 tests at under 10%.

All three pass the ASTM D1743 rust prevention test. On wet points, grease more often than the book interval and pump until clean grease shows at the joint, so fresh grease displaces what the water has worked on.

Will your greases work in my grease pump or automatic lube system?

Yes, for the Graco pumps we sell. Every Valvoline grease on this page is NLGI 2, and Graco rates its Fire-Ball 300, Fire-Ball 425 and LD air operated grease pumps for grease up to NLGI 2. The G-Mini and G3 automatic pumps take NLGI 000 to 2.

Two checks before you fill a pump or reservoir:

  • Cold starts: the firmer the grease, the harder it is to push through long lines and small divider valve passages. If your auto lube system works in cold weather, check the grade and temperature its manual calls for.
  • Softer grades: we don't list an NLGI 0 or 00 grease. If your system calls for one, tell us the system and we'll source it.

See air operated grease pumps and automatic lubrication systems.

Can I switch greases or mix two greases in the same machine?

Don't mix them. Every Valvoline grease data sheet carries the same instruction: do not mix greases, and wash bearings out before repacking. Mixing incompatible thickeners can break a grease down, which leaves the joint short of lubrication under load.

When you change products:

  • On pins, bushes and chassis points, pump the new grease through until clean new grease appears at the joint, so the old product is pushed out.
  • On wheel bearings, clean out the old grease and repack by hand.
  • Take most care moving between the clay-thickened No Melt grease and our lithium complex greases, which are different thickener chemistry.
  • Keep one grease per gun and label it, so the wrong cartridge doesn't end up in the wrong machine.