HPCR Diesel Filter Kits (5)

HPCR diesel filter kits add an extra stage of fuel filtration and water separation to the factory system on high-pressure common-rail engines. Ute and 4WD owners, fleet operators and mechanics fit them to give the injectors and high-pressure pump a second line of defence, particularly where fuel quality is unpredictable. Kits are either built for a specific vehicle, with brackets and hoses to suit, or universal and chosen by fuel flow and micron rating. The other call is water warning: a sensor and dash light tell you when the bowl needs draining. Common-rail components run at extreme pressure with almost no tolerance for contamination, and one bad tank of fuel can mean a set of injectors. Work through the selection notes below before you pick a kit.

HPCR Diesel Filter Kits

5 products

  • Donaldson P903316 High Efficiency Diesel Fuel Filter Kit – 3um, 114 Lph
    Vendor:
    Donaldson

    P903316 High Efficiency Diesel Fuel Filter Kit, 3um, 114 lph

    1 in stock
    Regular price $201.20 AUD
    Sale price $201.20 AUD Regular price
  • Donaldson X220112 water in fuel sensor and LED display kit
    Vendor:
    Donaldson

    X220112 Water in Fuel Sensor & LED Display Kit, Twist&Drain, 6-30V DC

    Regular price $259.80 AUD
    Sale price $259.80 AUD Regular price
  • Donaldson X900167 Element Fuel Filter
    Vendor:
    Donaldson

    X900167 High Efficiency Diesel Fuel Filter Kit, Primer Pump, 3um, 220 lph

    Regular price $336.10 AUD
    Sale price $336.10 AUD Regular price
  • Donaldson P903074 Element Fuel Filter
    Vendor:
    Donaldson

    P903074 High Efficiency Diesel Fuel Filter Kit, 3um, 379 lph

    Regular price $239.40 AUD
    Sale price $239.40 AUD Regular price
  • Donaldson P902976 Standard Efficiency Diesel Fuel Filter Kit – 11um, 114 Lph
    Vendor:
    Donaldson

    P902976 Standard Efficiency Diesel Fuel Filter Kit, 11um, 114 lph

    2 in stock
    Regular price $216.80 AUD
    Sale price $216.80 AUD Regular price

Why do common-rail diesels need extra fuel filtration?

Because the injection system is built to very fine tolerances and relies on the fuel for lubrication. Abrasive particles wear injector nozzles and pump components, and water causes corrosion and displaces the lubricating film diesel normally provides. The factory filter does its job, but a single fill of contaminated fuel can overwhelm it.

Vehicle-specific or universal kit?

Vehicle-specific kits are the simpler fit. They come with brackets, hoses and fittings designed around one engine bay, so installation is predictable. Universal kits suit older vehicles, machinery and anything without a dedicated kit, but you'll need to plan mounting, hose routing and fittings yourself.

Choosing an HPCR filter kit

Check these before you buy.

  • Fit: vehicle-specific by make, model and engine, or universal
  • Micron rating and efficiency, checked against the engine maker's recommendation
  • Fuel flow rating above the engine's supply flow, including fuel returned to the tank
  • Water separation, with a drain you can reach
  • Water-in-fuel sensor and warning, and its supply voltage
  • Primer pump for bleeding the system after a filter change
  • Mounting space and hose size

Replacement elements are in spin-on fuel water separators and fuel filter cartridge elements, and complete service kits are in 4WD service kits. Contact us if you're unsure which kit suits your engine.

Which diesel fuel filter kit suits my engine?

Sakura Filter Guard kits are matched to the vehicle; Donaldson kits are chosen by micron, then fuel flow.

  • 3 micron high efficiency (99% at 3 micron), for common-rail engines: P903316 at 114 lph, X900167 at 220 lph with a priming pump, and P903074 at 379 lph.
  • 11 micron standard efficiency (99% at 11 micron): P902976 at 114 lph, for engines that are not common-rail.

Our listings put P903316, X900167 and P902976 against engines up to 4.3 L, and P903074 against 4.4 L and above. Your engine's fuel flow is the real test, so if the engine maker gives a figure, check it against the kit's rating. If it doesn't, Donaldson's estimating rule for diesel is maximum power in kW × 0.914 (or horsepower × 0.681) in litres per hour. A 130 kW engine works out at about 119 lph, just over the P903316's 114 lph, so it needs the X900167 or P903074.

For the Holden Colorado RG, Ford Ranger PX and Everest UA, Mazda BT-50, Isuzu D-MAX TF and MU-X UC, or Mitsubishi Triton ML/MN and Challenger PB, Sakura's Filter Guard kits are listed by vehicle: FG-1001, FG-1002, FG-1003 and FG-1007. Each is a fuel/water separator assembly that fits ahead of the factory filter.

Does a primary filter kit replace the engine's own fuel filter?

No. It adds a filtration stage ahead of the factory filter, which stays in place and is serviced as normal. The kit takes the bulk of the dirt and water first, so the factory filter and the injectors see cleaner fuel.

Donaldson recommends extra primary filtration for vehicles working in harsh conditions or where fuel cleanliness is unreliable, which covers a lot of farm, site and remote fuel. Each filter kit, Donaldson and Sakura, includes a spare element to carry in the vehicle.

Do I have to fit the water bowl?

On the Donaldson kits, no: the bowl is supplied but optional. It does change the pressure rating: with the bowl fitted they are rated to 2.1 bar, without it 6.9 bar. If the mounting point sees more than 2.1 bar, run the kit without the bowl. Fuel line fittings and port plugs are included, and the operating range is -40°C to 121°C. For a dash warning when water collects, Donaldson lists the X220112 water-in-fuel sensor and LED display kit as an add-on for all four Donaldson kits.

On the Sakura Filter Guard kits, keep the bowl: it is where the separated water drops out and collects.

Can I use one of these kits on a bulk fuel tank?

No. These kits are built for an engine's fuel line, and the Donaldson kits are rated in litres per hour (114–379 lph) to suit an engine's fuel flow. A bulk dispenser moves fuel in litres per minute, and our Donaldson dispenser kits are rated from 121 to 375 lpm. Use a bulk tank or service truck kit on a pumped tank, or a gravity-fed kit on an overhead tank.