Is semi-synthetic gear oil worth it?
It is for axles that tow, carry heavy loads or run hot. A semi-synthetic resists thinning at temperature better than a mineral oil and flows more easily on a cold start. For vehicles on normal duty, a mineral oil of the right grade does the job, and for extreme heat, very heavy loads or extended drains, a full synthetic is the better pick.
Can you mix gear oils?
Top up with the same grade and rating where you can. Gear oils with the same GL rating generally tolerate a small top-up of another oil, but mixing dilutes the friction modifier in limited-slip oils and muddies the drain interval. When you switch base oil or brand, drain the unit fully and refill.
What to check before you buy
- Viscosity grade from the axle tag or manual.
- API GL rating for the unit.
- Limited-slip compatibility, where the diff needs it.
- Duty: towing, load and heat are what justify a blend over mineral.
- Drain interval: follow the OEM's schedule for severe use.
Need more protection? See synthetic gear oils. For lighter duty, mineral gear oil does the job. Filling from bulk? Look at oil dispensing guns. Ask us if the axle tag has you guessing.