Full View Pre-Cleaners (13)

Donaldson Full View pre-cleaners sit on top of an air intake stack and spin dust, chaff and debris out of the incoming air into a clear bowl, so anyone walking past can see when it needs emptying. They're a long-standing choice on tractors, headers, balers and other farm machines, as well as smaller engines working in dusty or chaffy conditions. Outlet size is the first thing to get right, matched to the outside diameter of the intake pipe. The clear bowl only helps if someone looks at it. Once it fills, separation stops and the dust load carries straight through to the air filter, which then blocks early. A bowl that cracks or hazes can be replaced on its own.

Full View Pre-Cleaners

13 products

  • Donaldson H001249 Full-View Pre-cleaner- 3.00 in / 76 mm Outlet
    Vendor:
    Donaldson

    H001249 Full-View Pre-cleaner- 3.00 in / 76 mm outlet

    6 in stock
    Regular price $74.40 AUD
    Sale price $74.40 AUD Regular price
  • Donaldson H002040 Full View Pre-cleaner- 2.00 in / 51 mm Outlet
    Vendor:
    Donaldson

    H002040 Full View Pre-cleaner- 2.00 in / 51 mm outlet

    4 in stock
    Regular price $86.10 AUD
    Sale price $86.10 AUD Regular price
  • Donaldson H002042 Full View Pre-cleaner- 1.75 in / 44 mm Outlet
    Vendor:
    Donaldson

    H002042 Full View Pre-cleaner- 1.75 in / 44 mm outlet

    2 in stock
    Regular price $83.70 AUD
    Sale price $83.70 AUD Regular price
  • Donaldson H001251 Full-View Pre-cleaner- 2.50 in / 64 mm Outlet
    Vendor:
    Donaldson

    H001251 Full-View Pre-cleaner- 2.50 in / 64 mm outlet

    1 in stock
    Regular price $77.20 AUD
    Sale price $77.20 AUD Regular price
  • Donaldson H000821 Full View Pre-cleaner- 3.75 in / 95 mm Outlet
    Vendor:
    Donaldson

    H000821 Full View Pre-cleaner- 3.75 in / 95 mm outlet

    Regular price $137.90 AUD
    Sale price $137.90 AUD Regular price
  • Donaldson H001250 Full View Pre-cleaner- 2.25 in / 57 mm Outlet
    Vendor:
    Donaldson

    H001250 Full View Pre-cleaner- 2.25 in / 57 mm outlet

    2 in stock
    Regular price $86.20 AUD
    Sale price $86.20 AUD Regular price
  • Donaldson H000858 Full View Pre-cleaner- 4.00 in / 102 mm Outlet
    Vendor:
    Donaldson

    H000858 Full View Pre-cleaner- 4.00 in / 102 mm outlet

    1 in stock
    Regular price $133.40 AUD
    Sale price $133.40 AUD Regular price
  • Donaldson H002224 Full View Pre-cleaner- 7.00 in / 178 mm Outlet
    Vendor:
    Donaldson

    H002224 Full View Pre-cleaner- 7.00 in / 178 mm outlet

    Regular price $373.30 AUD
    Sale price $373.30 AUD Regular price
  • Donaldson H002223 Full View Pre-cleaner – 6.00 in / 152 mm Outlet
    Vendor:
    Donaldson

    H002223 Full View Pre-cleaner, 6.00 in / 152 mm outlet

    Regular price $358.40 AUD
    Sale price $358.40 AUD Regular price
  • Donaldson H002043 Full View Pre-cleaner- 5.00 in / 127 mm Outlet
    Vendor:
    Donaldson

    H002043 Full View Pre-cleaner- 5.00 in / 127 mm outlet

    Regular price $193.90 AUD
    Sale price $193.90 AUD Regular price
  • Donaldson H001823 Full View Pre-cleaner – Heavy Duty, 2.00 in / 51 mm Outlet
    Vendor:
    Donaldson

    H001823 Full View Pre-cleaner- Heavy Duty, 2.00 in / 51 mm outlet

    Regular price $87.50 AUD
    Sale price $87.50 AUD Regular price
  • Donaldson H000823 Full View Pre-cleaner- 4.50 in / 114 mm Outlet
    Vendor:
    Donaldson

    H000823 Full View Pre-cleaner- 4.50 in / 114 mm outlet

    Regular price $140.80 AUD
    Sale price $140.80 AUD Regular price
  • Donaldson H000820 Full View Pre-cleaner – Heavy Duty, 3.00 in / 76 mm Outlet
    Vendor:
    Donaldson

    H000820 Full View Pre-cleaner- Heavy Duty, 3.00 in / 76 mm outlet

    Regular price $133.90 AUD
    Sale price $133.90 AUD Regular price

How does a Full View pre-cleaner work?

Vanes set the incoming air spinning, and the heavier dust and chaff are thrown outwards and drop into the bowl. Cleaner air carries on down the stack to the air cleaner. Nothing is ejected automatically, so the bowl must be emptied by hand. Fit the unit squarely on the pipe and secure it, since one that tilts or works loose stops separating evenly.

How often should the bowl be emptied?

Before it fills, which during harvest or dry cultivation can mean daily or more often. Make it part of the pre-start walkaround rather than the scheduled service. Tip the dust well away from the intake, check the bowl seats evenly when it goes back on, and clear any chaff caught around the vanes.

Full View or self-cleaning?

Choose a Full View where you want to see the dust load at a glance and someone checks the machine every day. Where nobody will, a self-purging TopSpin takes the bowl out of the equation.

  • Intake pipe outside diameter
  • Standard or heavy duty version
  • Height clearance above the stack
  • Engine airflow against the unit's rating
  • A spare bowl for each size you run

Spare bowls are in Full View replacement bowls. Compare self-cleaning TopSpin pre-cleaners or every type in pre-cleaners, or ask us to match a unit.

Which Full View size fits my intake?

Go by the intake pipe first, then check the airflow. Our Full View range runs from a 44 mm outlet (H002042) to 178 mm (H002224), and each listing gives the maximum rated airflow in m³/min.

Measure the outside diameter of the pipe the unit will sit on, find the matching outlet, and check your engine's airflow is under that unit's maximum. At 51 mm and 76 mm there are two units per outlet, and airflow decides between them (see the next question).

What's the difference between the Heavy Duty and standard Full View with the same outlet?

Donaldson's Heavy Duty versions put the same outlet on a bigger body, which lifts the airflow rating and takes a bigger bowl.

  • 51 mm outlet: H002040 is rated to 2.6 m³/min on a 141.7 mm body. The Heavy Duty H001823 is rated to 3.1 m³/min on a 186 mm body.
  • 76 mm outlet: H001249 is rated to 4.8 m³/min on a 186.5 mm body. The Heavy Duty H000820 is rated to 9.1 m³/min on a 269.75 mm body.

All four carry the same rating of about 75% dust removal. Choose on your engine's airflow and the space around the intake.

How often do I need to empty the bowl?

Empty it on condition, not by the clock. The clear bowl is the point of the Full View design: you can see the collected dust and empty it before it builds up, instead of guessing a service interval.

How often depends entirely on the dust and chaff load, so during dusty work make it part of the pre-start check. When you refit the bowl, make sure it is seated properly so the joint seals. A bowl that has gone cloudy or cracked is sold on its own: see replacement bowls.

Can I fit a Full View on a modern turbo diesel?

Yes, provided it's sized to the engine's airflow and the total intake restriction stays inside the engine maker's limit. Donaldson's specifications put a Full View at 25–76 mm H₂O of restriction across its rated range.

These are original equipment on plenty of machines. The H001250, for example, cross-references to AGCO, Case IH, John Deere, New Holland and Volvo part numbers. If your engine's airflow sits right at a unit's maximum, step up a size.

Should I swap my Full View for a self-cleaning pre-cleaner?

If nobody checks the bowl, yes. A Full View relies on someone emptying it; a TopSpin HD ejects dust continuously with no bowl. Donaldson lists a direct TopSpin HD replacement for seven of our Full View sizes, and the swaps are on the TopSpin HD page.

What you give up is the at-a-glance check of how much dust the machine is pulling in. If the operator does a daily walk-around, the Full View is still a sound choice.