Specialty Hose & Cable Reels (3)

Specialty hose and cable reels manage power leads and gas lines in the workshop, keeping them off the floor and out of harm's way between jobs. The main types are electrical cable reels for 240V tools and lights, and twin hose reels for oxy/acetylene and oxy/LPG cutting and welding sets. Workshops, fabrication shops and maintenance bays mount them on walls, benches and ceilings. For a cable reel, check the current rating and IP rating. For a gas reel, match the hose to the fuel gas your set runs on. Gas hose dragged across the floor gets cut and crushed, and a damaged gas line is a fire risk. The ratings to check are set out under the products.

Ultraflo – AF-P-OLPG512 – oxy/LPG twin hose reel, 12m – three-quarter view

3 products

  • RAASM – AF-RA-2315SFA – 240V 15m 10A cable reel – three-quarter view
    Vendor:
    RAASM

    AF-RA-2315SFA RAASM 240V Cable Reel, 15m x 10A, IP44, Thermal Protection

    Regular price $781.00 AUD
    Sale price $781.00 AUD Regular price
  • Ultraflo – AF-P-OLPG512 – oxy/LPG twin hose reel, 12m – three-quarter view
    Vendor:
    A-FLO Equipment

    AF-P-OLPG512 Oxy/LPG Twin Hose Reel, 12m x 5mm ID Twin Hose, 250 psi

    Regular price $837.10 AUD
    Sale price $837.10 AUD Regular price
  • Ultraflo – AF-AE-OSV200815 – oxy/acetylene twin hose reel, 15m – front view
    Vendor:
    A-FLO Equipment

    AF-AE-OSV200815 Oxy/Acetylene Twin Hose Reel, 15m x 8mm Twin Hose, 280 psi

    Regular price $2,006.40 AUD
    Sale price $2,006.40 AUD Regular price

How do you choose a cable reel?

Match the reel's current rating to the tools you plug in, and check its IP rating suits where it's mounted. Fully unwind the lead when running high loads, because a coiled cable can't shed heat and may overheat. Reels with thermal protection cut out before that happens. Check the lead and plug regularly, and have the reel tested and tagged as your site requires.

How do you choose a twin gas hose reel?

Buy the reel for your fuel gas. Oxy/acetylene and oxy/LPG sets use different fuel gas hose, and hoses are colour coded for the gas they carry, so check the reel's hose matches your set. Keep flashback arrestors fitted and inspect hoses for cuts, cracking and leaks.

  • Cable reel: voltage, current rating, lead length, IP rating and thermal cut-out.
  • Gas reel: fuel gas type, hose length and bore, and pressure rating against your regulator settings.
  • Mounting: wall, ceiling or bench, with room for the hose or lead to pay out straight.
  • Swivel and guide arm for smooth payout and longer hose life.
  • Location: away from heat, sparks and sharp edges, with the reel easy to reach.

For compressed air and water, see air and water hose reels. Browse every reel at hose reels for all fluids, or ask us about your setup.

Can I run acetylene through the oxy/LPG reel?

No. The AF-P-OLPG512 is for oxygen and LPG only; for oxy/acetylene sets use the AF-AE-OSV200815.

  • AF-P-OLPG512: 12 m of 5 mm ID twin hose, blue for oxygen and orange for LPG, rated to 1.7 MPa (250 psi) and -35 °C to +70 °C.
  • AF-AE-OSV200815: 15 m of 8 mm twin hose rated to 280 psi (about 19.3 bar), in a UV-stabilised polypropylene case.

Before connecting either, confirm the hose end fittings suit your regulators and torch, and that the hose meets your site's welding hose requirements.

How much load can the 240V cable reel carry?

10 A (2,300 W) with the cable fully unwound, but only 5 A (1,200 W) with it coiled on the drum. Running a full load on a wound reel is what overheats a cable reel, which is why the AF-RA-2315SFA has a thermal protector.

It's IP44 rated for indoor use or outdoors under cover, works from -5 °C to +40 °C, and carries RCM approval to AS/NZS 3105:2014. Plug it into an RCD-protected 10 A outlet within reach of its 1.3 m inlet lead.

What do I need to connect a gas hose reel safely?

Fittings matched to each gas, flashback arrestors, and a leak test before you light up. The reels come with the twin hose, and A-FLO doesn't list flashback arrestors as included, so plan to fit them.

  • Fittings: fuel-gas fittings are left-hand thread and oxygen fittings right-hand, so each hose takes the fitting for its gas. Confirm they suit your regulators and torch.
  • Flashback arrestors: fit them on both reels' lines.
  • Leak test: check every connection with a leak detection solution before lighting.
  • No oil or grease on oxygen fittings.

On the AF-AE-OSV200815, also confirm the hose meets your site's welding hose requirements. If you'd like the fittings checked against your set, send us the regulator and torch details.