Hydraulic Oil (17)

Hydraulic oil for excavators, loaders, tippers, cranes, farm machinery, presses and fixed industrial systems. A hydraulic oil transmits power, lubricates pumps, motors and valves, carries heat away and protects against rust, so it has to hold its viscosity, resist foaming and separate cleanly from water.

The two decisions are the ISO viscosity grade the OEM lists for the machine and climate, and the oil type: standard anti-wear for most machines, or high viscosity index (HVI) for machines that start cold and work hot. Too thin and pumps wear while the system runs hot. Too thick and controls go sluggish on cold mornings and the pump can cavitate. Keep it clean too, because contamination is a leading cause of pump and valve wear. The guide below explains the grades.

Hydraulic Oil

17 products

  • Valvoline 2172.20 Ultramax 32 Hydraulic Oil 20L
    Vendor:
    Valvoline

    2172.20 Ultramax 32 Hydraulic Oil 20L

    2 in stock
    Regular price $169.00 AUD
    Sale price $169.00 AUD Regular price
  • Valvoline 2173 IBC Ultramax 46 Hydraulic Oil 1000L
    Vendor:
    Valvoline

    2173 IBC Ultramax 46 Hydraulic Oil 1000L

    Regular price $5,800.00 AUD
    Sale price $5,800.00 AUD Regular price
  • Valvoline 2174.51 Ultramax 68 Hydraulic Oil 205L
    Vendor:
    Valvoline

    2174.51 Ultramax 68 Hydraulic Oil 205L

    Regular price $1,350.00 AUD
    Sale price $1,350.00 AUD Regular price
  • Valvoline 2173.51 Ultramax 46 Hydraulic Oil 205L
    Vendor:
    Valvoline

    2173.51 Ultramax 46 Hydraulic Oil 205L

    Regular price $1,350.00 AUD
    Sale price $1,350.00 AUD Regular price
  • Valvoline 2151.51 Ultramax HVI 46 Hydraulic Oil 205L
    Vendor:
    Valvoline

    2151.51 Ultramax HVI 46 Hydraulic Oil 205L

    Regular price $1,500.00 AUD
    Sale price $1,500.00 AUD Regular price
  • Valvoline 2174.20 Ultramax 68 Hydraulic Oil 20L
    Vendor:
    Valvoline

    2174.20 Ultramax 68 Hydraulic Oil 20L

    3 in stock
    Regular price $169.00 AUD
    Sale price $169.00 AUD Regular price
  • Valvoline 2172.05 Ultramax 32 Hydraulic Oil 5L
    Vendor:
    Valvoline

    2172.05 Ultramax 32 Hydraulic Oil 5L

    Regular price $48.65 AUD
    Sale price $48.65 AUD Regular price
  • Valvoline 2151.20 Ultramax HVI 46 Hydraulic Oil 20L
    Vendor:
    Valvoline

    2151.20 Ultramax HVI 46 Hydraulic Oil 20L

    8 in stock
    Regular price $179.00 AUD
    Sale price $179.00 AUD Regular price
  • Valvoline 2174 IBC Ultramax 68 Hydraulic Oil 1000L
    Vendor:
    Valvoline

    2174 IBC Ultramax 68 Hydraulic Oil 1000L

    Regular price $5,800.00 AUD
    Sale price $5,800.00 AUD Regular price
  • Valvoline 2172.51 Ultramax 32 Hydraulic Oil 205L
    Vendor:
    Valvoline

    2172.51 Ultramax 32 Hydraulic Oil 205L

    Regular price $1,350.00 AUD
    Sale price $1,350.00 AUD Regular price
  • Valvoline 2152.51 Ultramax HVI 68 Hydraulic Oil 205L
    Vendor:
    Valvoline

    2152.51 Ultramax HVI 68 Hydraulic Oil 205L

    Regular price $1,500.00 AUD
    Sale price $1,500.00 AUD Regular price
  • Valvoline 2150.51 Ultramax HVI 32 Hydraulic Oil 205L
    Vendor:
    Valvoline

    2150.51 Ultramax HVI 32 Hydraulic Oil 205L

    Regular price $1,500.00 AUD
    Sale price $1,500.00 AUD Regular price
  • Valvoline 2174.05 Ultramax 68 Hydraulic Oil 5L
    Vendor:
    Valvoline

    2174.05 Ultramax 68 Hydraulic Oil 5L

    Regular price $48.65 AUD
    Sale price $48.65 AUD Regular price
  • Valvoline 2173.20 Ultramax 46 Hydraulic Oil 20L
    Vendor:
    Valvoline

    2173.20 Ultramax 46 Hydraulic Oil 20L

    3 in stock
    Regular price $169.00 AUD
    Sale price $169.00 AUD Regular price
  • Valvoline 2173.05 Ultramax 46 Hydraulic Oil 5L
    Vendor:
    Valvoline

    2173.05 Ultramax 46 Hydraulic Oil 5L

    3 in stock
    Regular price $48.65 AUD
    Sale price $48.65 AUD Regular price

ISO 32, 46 or 68: which hydraulic oil grade?

Use the grade in the machine's manual. The number is the oil's viscosity at 40°C, so 32 is the thinnest of the common grades and 68 the thickest. Machine makers choose the grade to suit pump design, operating temperature and climate, and some list different grades for winter and summer.

What is HVI hydraulic oil?

It's oil that changes viscosity less as temperature changes. A high viscosity index oil stays thinner when cold and thicker when hot than a standard oil of the same grade, so it suits machines that start in frost and then work hard in the heat. In the standards these are often written as HV or HVLP, while standard anti-wear oils are HM or HLP.

Can you mix hydraulic oils?

Top up with what's already in the tank. Mixing grades leaves you with a viscosity the OEM didn't choose, and some additive types, such as zinc-based and zinc-free anti-wear oils, aren't always compatible. When you change oil type, drain and flush the system and change the filters.

  • ISO viscosity grade from the OEM manual.
  • Standard anti-wear or HVI, depending on the temperature range the machine works in.
  • Zinc-based or zinc-free, where the OEM or the environment calls for it.
  • OEM or industry standards listed in the manual, such as DIN 51524.
  • Clean filling: transfer through a filtered pump where you can.

Protect the oil with hydraulic filters and desiccant breathers, and for drum-to-tank transfer see portable filter carts. Not sure of the grade? Ask us.

Which hydraulic oil grade do I need?

Use the ISO grade in your machine's manual or on the pump maker's plate. We stock ISO 32, 46 and 68 in both Ultramax and Ultramax HVI.

The ISO number is the oil's nominal viscosity in mm²/s at 40 °C, so a higher number is a thicker oil.

  • ISO 32: precision and cooler-running systems.
  • ISO 46: the general-purpose grade that suits most mobile and industrial hydraulics, from loaders and tippers to factory equipment.
  • ISO 68: hot or higher-pressure systems that specify it.

A grade off the spec means the oil is thinner or thicker than the pump and valves were designed around at every temperature. Fix the grade first, then decide between standard and HVI.

Should I use standard Ultramax or Ultramax HVI?

Use Ultramax HVI if the machine starts cold and works hot, and standard Ultramax if the system runs at a fairly steady temperature.

HVI stands for high viscosity index: the oil thins less as it heats and thickens less as it cools, so it stays closer to its rated grade from a cold start to full working temperature. Valvoline recommends HVI particularly where temperature extremes are expected, which describes most mobile plant working outdoors.

Check the specification line too. If your manual calls for DIN 51524 Part 3 (HVLP) or ISO 11158 HV, you need Ultramax HVI. If it calls for Part 2 (HLP) or ISO 11158 HM, standard Ultramax is the match. Moving a machine from one to the other, for example for a colder site, is a full drain and refill job, not a top-up.

Is Ultramax approved for Rexroth, Parker Denison and Eaton Vickers pumps?

Yes. Both Ultramax and Ultramax HVI list these pump-maker approvals and test standards on their data sheets:

  • Bosch Rexroth: RDE 90235.
  • Parker Denison: HF-0, HF-1 and HF-2.
  • Eaton Vickers: M-2905-S (mobile), 1-286-S (stationary) and the 35VQ25 pump test.
  • Also listed: ASTM D6158, Fives Cincinnati and General Motors LS-2.

Most pump manuals name one of these rather than an oil brand, so match the line in your manual to the list on the product page before you order. If your machine's manual names a specification that isn't on the list, send it to us and we'll check it against Valvoline's data.

Do you sell zinc-free hydraulic oil?

No. Every hydraulic oil we list, Ultramax and Ultramax HVI, is a zinc-based anti-wear oil.

That matters for a short list of equipment. Valvoline's data sheets say standard Ultramax is not recommended for ammonia compressors, heat transfer service, or equipment and pumps with silver bearings, and Ultramax HVI is not recommended for Lucas pumps with silver bearings.

If your manual specifies a zinc-free or ashless hydraulic oil, don't substitute one of ours. Send us the specification and we'll source a fluid that meets it.

Should I filter new hydraulic oil when I fill the machine?

Yes. Valvoline's guidance for Ultramax is to store the oil sealed, filter it on filling and keep the system filters serviced, because fine grit is what damages pumps and valves.

The oil's anti-wear and rust inhibitors can't do anything about dirt that goes in with it. A bulk oil service system filters as you transfer: Donaldson's B.O.S.S P506081 runs 14 micron at 6 lpm and the B.O.S.S P506037 runs 25 micron at 40 lpm.

Store drums under cover. If they must sit outside, lay them on their side so water can't get in past the bungs.

How often should I change hydraulic oil?

Change it at the interval in the machine's service schedule, or sooner if oil analysis says it is due. We don't quote a blanket hour figure, because the right interval depends on the machine, the duty and how clean the oil is kept.

Oil analysis is how you know rather than guess, and it is the only safe basis for running past the book interval.

Between changes, drain any free water from the reservoir. Ultramax is non-detergent, so it lets water and contaminants separate out rather than holding them in suspension, and that water needs to come out.