What does a breather filter actually do?
It filters the air that enters a tank as the fluid level drops or the fluid cools and contracts. Without one, an open vent pulls in airborne dust, water vapour and grit, which ends up in the oil, wears pumps and valves and shortens fluid life. A good breather is one of the cheapest contamination controls on a machine.
Choosing the right micron rating
Match the breather to the cleanliness the system is built for. A breather much coarser than the main filters lets in particles those filters then have to remove, while a very fine breather loads faster and needs more frequent checks. When in doubt, follow the OEM manual or the rating on the breather you're replacing.
Spin-on, cartridge or desiccant?
Spin-on breathers screw onto a threaded mount and are quick to swap. Cartridge and element types fit inside a cap or housing, and foam elements suit coarse, low-cost venting. Desiccant breathers add a drying stage for humid sites, washdown areas and stored fluids where condensation is a problem.
- Mounting: thread size, flange or clamp-on cap
- Micron rating compared with the system filtration
- Airflow capacity to match how fast the fluid level can change
- Check valve, coalescing or desiccant options
- Change indicator or a body you can inspect
Change breathers with the system filters. Main circuit elements are in hydraulic filters, bulk storage tanks suit T.R.A.P breathers, and tank-to-machine cleanliness starts with bulk fuel and lube filtration. Unsure which one fits? Send us the part number.
