Oil Hose Reels (16)

Oil hose reels keep the dispensing hose off the floor and ready at each service point, then rewind it out of the way when the job's done. Most are spring rewind, with motor driven reels used on larger bulk systems and lube trucks. You'll see them on workshop walls, ceilings, pits and service bodies in workshops and depots. Pressure is the first check: the reel and hose must be rated above your pump's outlet pressure. After that, hose bore and length decide how quickly oil arrives at the gun. Run an under-rated reel off a high ratio pump and you're inviting a burst hose in the bay. Reels come bare or with hose fitted, so check which you need before you order.

Oil Hose Reels

16 products

  • Graco HSMD5F XD 30 Series Oil Hose Reel, 3/4" x 15 m Hose – right-front view
    Vendor:
    Graco

    HSMD5F XD 30 Series Oil Hose Reel, 3/4" x 15 m Hose

    Regular price $2,808.60 AUD
    Sale price $2,808.60 AUD Regular price
  • Graco XDM65F XDX 20 Series Oil Hose Reel, 1/2" x 15 m Hose
    Vendor:
    Graco

    XDM65F XDX 20 Series Oil Hose Reel, 1/2" x 15 m Hose

    Regular price $2,149.50 AUD
    Sale price $2,149.50 AUD Regular price
  • Graco 24P322 XD 40 Series Bare Oil Hose Reel, C Spring, 138 bar
    Vendor:
    Graco

    24P322 XD 40 Series Bare Oil Hose Reel, C Spring, 138 bar

    Regular price $3,621.00 AUD
    Sale price $3,621.00 AUD Regular price
  • Graco HEM004 LDX Series Oil Hose Reel, 1/2" x 15 m Hose – left-front view
    Vendor:
    Graco

    HEM004 LDX Series Oil Hose Reel, 1/2" x 15 m Hose

    Regular price $918.30 AUD
    Sale price $918.30 AUD Regular price
  • RAASM 8540.400 Fixed Hose Reel – 540 Series, Bare Reel, 150 Bar
    Vendor:
    RAASM

    8540.400 Fixed Hose Reel, 540 Series, Bare Reel, 150 bar

    Regular price $1,690.00 AUD
    Sale price $1,690.00 AUD Regular price
  • RAASM 8540.413 Fixed Hose Reel – 540 Series, 15m G1 Inch Black Rubber Hose, 50 Bar
    Vendor:
    RAASM

    8540.413 Fixed Hose Reel, 540 Series, 15m G1" Black Rubber Hose, 50 bar

    Regular price $3,031.00 AUD
    Sale price $3,031.00 AUD Regular price
  • RAASM 8540.412 Fixed Hose Reel – 540 Series, 20m 3/4 Inch Black Rubber Hose, 100 Bar
    Vendor:
    RAASM

    8540.412 Fixed Hose Reel, 540 Series, 20m 3/4" Black Rubber Hose, 100 bar

    Regular price $2,879.00 AUD
    Sale price $2,879.00 AUD Regular price $2,879.00 AUD
  • RAASM 8540.411 Fixed Hose Reel – 540 Series, 15m 3/4 Inch Black Rubber Hose, 100 Bar
    Vendor:
    RAASM

    8540.411 Fixed Hose Reel, 540 Series, 15m 3/4" Black Rubber Hose, 100 bar

    Regular price $2,545.00 AUD
    Sale price $2,545.00 AUD Regular price
  • RAASM 8617.400 617 Series hydraulic motor driven bare oil hose reel
    Vendor:
    RAASM

    8617.400 617 Series Hydraulic Motor Oil Hose Reel, Bare, 1" Ports

    Regular price $7,799.00 AUD
    Sale price $7,799.00 AUD Regular price
  • RAASM 8560.400 560 Series bare spring rewind oil hose reel with 1 inch connections
    Vendor:
    RAASM

    8560.400 560 Series Bare Oil Hose Reel, 1" Inlet & Outlet, 150 bar

    Regular price $2,893.00 AUD
    Sale price $2,893.00 AUD Regular price
  • RAASM 8530.402 Fixed Hose Reel – 530 Series, 25m 1/2? Black Rubber Hose, 150 Bar
    Vendor:
    RAASM

    8530.402 Fixed Hose Reel, 530 Series, 25m 1/2″ Black Rubber Hose, 150 bar

    Regular price $2,181.00 AUD
    Sale price $2,181.00 AUD Regular price
  • RAASM 8530.401 Fixed Hose Reel – 530 Series, 20m 1/2? Black Rubber Hose, 150 Bar
    Vendor:
    RAASM

    8530.401 Fixed Hose Reel, 530 Series, 20m 1/2″ Black Rubber Hose, 150 bar

    Regular price $1,915.00 AUD
    Sale price $1,915.00 AUD Regular price
  • RAASM 8530.400 Fixed Hose Reel – 530 Series, Bare Reel, 150 Bar
    Vendor:
    RAASM

    8530.400 Fixed Hose Reel, 530 Series, Bare Reel, 150 bar

    Regular price $1,205.00 AUD
    Sale price $1,205.00 AUD Regular price
  • RAASM 8430.402 Fixed Hose Reel – 430 Series, 15m 1/2 Inch Black Rubber Hose, 150 Bar
    Up to $278.60 off
    Vendor:
    RAASM

    8430.402 Fixed Hose Reel, 430 Series, 15m 1/2" Black Rubber Hose, 150 bar

    Regular price $1,225.00 AUD
    Sale price $1,225.00 AUD Regular price $1,503.60 AUD
  • RAASM 8430.400 430 Series fixed spring oil hose reel (bare), painted steel construction, G 1/2" female ports, 150 bar rated
    Vendor:
    RAASM

    8430.400 Fixed Hose Reel, 430 Series, Bare Reel, 150 bar

    Regular price $965.00 AUD
    Sale price $965.00 AUD Regular price

Bare reel or reel with hose?

A hosed reel is ready to mount and plumb in. A bare reel lets you choose your own hose length and type, or reuse hose you already have, but the hose has to suit the reel's inlet, swivel and drum capacity.

How to choose an oil hose reel

  • Working pressure, above your pump's maximum outlet pressure.
  • Hose bore: larger bores move heavier oil and higher flows with less pressure drop.
  • Hose length, enough to reach every vehicle position without stretching.
  • Drive: spring rewind for most bays, motor driven for long or heavy hose.
  • Mounting: wall, ceiling, floor or pit, and whether you need a swing bracket or guide arm.
  • Fluid: confirm the seals and swivel suit the oil you're running.

Why is oil slow at the end of my reel?

Usually the hose is too long or too narrow for the oil and pump ratio, or the pump itself is undersized. Pressure drops along every metre of hose, and the effect grows with thicker oil and colder weather. A bigger bore or a higher ratio pump fixes most cases.

Match the reel to your air operated oil pump and finish it with a metered oil gun. Need reels for air, diesel or AdBlue too? Start at hose reels for all fluids.

Should I run a 1/2", 3/4" or 1" oil reel?

Size the reel to the gun and the pump behind it: 1/2" for a standard dispense point, 3/4" or larger where a high-flow gun or several technicians draw from one pump.

  • 1/2": the RAASM 390, 430 and 530 Series reels and Graco's XDM65F and HEM004. Graco builds its LD and Fire-Ball 300 dispense points this way, with the EM8 meter at 0.95–30.3 lpm.
  • 3/4": the RAASM 8540.411 (15 m) and 8540.412 (20 m), rated to 100 bar, and the Graco HSMD5F, which Graco positions for longer-range dispensing and more capacity, with a full-flow swivel to keep pressure drop down. It pairs with the Fire-Ball 425 3:1 and the EM20 meter, which meters up to 75.7 lpm.
  • 1": the RAASM 8540.413, 15 m of 1" hose rated to 50 bar.
  • 3/4" or 1" on a bare reel: the RAASM 8540.400, 8560.400 and 8617.400 have G 1" ports and take either hose (the 540 drops from 150 bar bare to 100 bar with 3/4" hose and 50 bar with 1"); a 3/4" hose suits the RAASM 33146 high-volume metered gun.

A wider hose won't add flow the pump and gun can't deliver, so match all three.

Spring rewind or hydraulic motor: which do I need?

Spring rewind for almost every workshop point; the hydraulic motor reel only where a long, oil-filled hose is too heavy for a spring.

  • Spring: every reel here except one. On the Graco XD reels the spring tension can be adjusted with the hose under pressure, so retraction matches a full oil hose. On the bare RAASM 8560.400 you set the spring preload with a 12 mm Allen key to suit the hose you fit, then the hose stop fixes how much stays out.
  • Hydraulic motor: the RAASM 8617.400 winds the drum by motor when its control is operated, and a parking brake locks it. It holds 30 m of 3/4" or 25 m of 1" hose. It needs a hydraulic supply of up to 170 bar at 5 lpm fed through a control valve, and neither the power unit nor the control is supplied.

If you don't already have hydraulic power at the bay, a spring reel such as the 8560.400 on the same G 1" ports is the simpler install.

Is the reel rated for the pressure my pump puts out?

Almost always, but the reel is rarely the weak link: the inlet kit and the gun often rate lower, and the line is only as strong as its lowest-rated part.

  • Pumps: our Graco oil pumps top out between 31 bar (LD 3:1) and 76 bar (Fire-Ball 425 6:1). RAASM doesn't publish a maximum fluid pressure for its stub pumps, so multiply the ratio by your air pressure: a 12:1 115F/121 on 8 bar air can reach about 96 bar.
  • Reels: the RAASM 1/2" reels and bare reels are rated to 150 bar, but the hosed 540 Series drops to 100 bar with 3/4" hose (8540.411, 8540.412) and 50 bar with 1" hose (8540.413); the Graco XDM65F and 24P322 to 138 bar, the HEM004 to 103 bar and the HSMD5F to 86 bar.
  • Inlet kits: the 24P322's required 24R111 inlet kit is rated to 88 bar, so that installation works to 88 bar.
  • Guns: most RAASM, Ultraflo and A-FLO guns are rated to 70 bar, the RAASM 37751 to 100 bar, and the Graco meters and valves to 102–103.4 bar.

On a high-ratio pump, fit an air regulator and set it so the outlet stays under the lowest rating in the line.

Which oil gun fits each reel?

Match the gun inlet to the reel's hose end: the hosed RAASM reels end in G 1/2" (BSP) male, the Graco reels in NPT male.

  • RAASM 390, 430 and 530 reels: the G 1/2" male outlet takes the RAASM 37751 (lever lock, 100 bar) or 38022 manual guns, or the 37758 metered gun, directly, and the Ultraflo AF-A-102111B has a matching 1/2" BSP female swivel.
  • Graco XDM65F and HEM004 (1/2" NPT): the EM8 meter (25C903, 25C904), the PM8 preset meter, the SDM8 (25M404, 25M406) or, unmetered, the XDV20 1/2" valve.
  • Graco HSMD5F (3/4" NPT): the EM20 meter (25C918, 25C919) or the XDV20 3/4" valve (247723, 247722).
  • Bare 1" reels with 3/4" hose: a male G 3/4" hose end takes the RAASM 33146 metered gun, or the 33150 handle with a terminal.

A Graco gun on a RAASM reel, or the other way round, needs a BSP to NPT adapter at the gun.

What else do I need to install an oil hose reel?

Graco reels need an inlet hose kit that isn't in the box; RAASM reels need a filter upstream and your own fixings.

  • Graco inlet kits (required): 218549 for the XDM65F, 24E284 for the HSMD5F, 25U371 for the HEM004 and 24R111 for the 24P322. The bare 24P322 also needs hose and a ball stop kit sized to it. These aren't listed on our site, so ask us for them with the reel.
  • RAASM connection and filtration: the hosed 390 and 430 reels come with a 0.6 m connection hose. RAASM requires a filter upstream of the reel; our Bulk hP high pressure filters are built for oil delivered under pressure through hose reels and are rated to 68.9 bar, so regulate the pump's air to keep its output below that.
  • Fixings: RAASM doesn't supply plugs or bolts, and they must carry the reel with its full hose: M8 at 15 N·m on the 390 Series, M10 at 25 N·m on the 560 Series. Graco's LDX and XDX reels bolt down with four bolts and four large flat washers.
  • Bare reels: we don't list loose oil hose, so send us the length, bore and end fittings you need and we'll supply hose to suit.