Chemical Sprayers & Pumps (2)

Chemical sprayers apply cleaners, degreasers, solvents and rust treatments exactly where they're needed, without decanting into open trays or wasting product. Hand-held pressure sprayers are pumped up by hand and deliver a fine mist or a jet, which suits workshop benches, engine bays and parts cleaning. Seal material decides the choice, because the seals and nozzle have to resist the chemical you're spraying. Capacity comes next.

A sprayer built for water-based detergent won't stand up to a solvent. Its seals swell, the pump stops holding pressure and you end up with chemical on your hands. Read the label and safety data sheet before you fill any sprayer.

Chemical Sprayers & Pumps

2 products

  • A-FLO AF-AP-3135PK Kläger Plastik Profi 1.5L Solvent Resistant Industrial Pressure Sprayer
    Vendor:
    A-FLO Equipment

    Kläger Plastik Profi 1.5L Solvent Resistant Industrial Pressure Sprayer

    2 in stock
    Regular price $85.80 AUD
    Sale price $85.80 AUD Regular price $85.80 AUD
  • A-FLO AF-AP-3132PK Kläger Plastik Hobby 1L Solvent Resistant Industrial Pressure Sprayer
    Vendor:
    A-FLO Equipment

    Kläger Plastik Hobby 1L Solvent Resistant Industrial Pressure Sprayer

    3 in stock
    Regular price $75.90 AUD
    Sale price $75.90 AUD Regular price $75.90 AUD

Which seal material suits my chemical?

Check the chemical's safety data sheet against the sprayer's seal material. As a general guide, FKM seals handle most oils and hydrocarbon solvents, EPDM suits water-based acidic and alkaline cleaners but not oils, and nitrile (NBR) suits oils and fuels. No single seal resists everything, which is why solvent-resistant sprayers are sold separately from garden-style units.

How do I use a pressure sprayer safely?

Release the pressure before you open the lid, every time. Don't pump beyond the point the relief valve or maker allows, and wear gloves and eye protection suited to the chemical. Flammable solvents should never be sprayed near a running engine, grinder or other ignition source. Use this list when choosing:

  • Seal material matched to the chemical
  • Capacity for the job and your hand
  • Pressure relief valve
  • Adjustable nozzle, from mist to jet
  • Clear level marking on the bottle
  • Spare seals available

How do I look after a chemical sprayer?

Rinse it after each job and release the pressure before storing it, so the seals aren't left under load. Keep one sprayer per chemical where you can, label it, and store it out of direct sun. Replace the seals as soon as the pump stops holding pressure.

Fill it from the chemicals and cleaners range or brake parts cleaner and degreaser, grab gloves and eye protection from PPE, and keep a spill kit close by. Spraying something unusual? Ask us first.

Which chemicals can these sprayers handle?

Most solvent-based liquids, including hydrocarbons, mineral oils and petroleum products and their derivatives. The wetted parts are PA, FKM and V2A stainless, which is what stops the seals swelling and the trigger leaking the way a standard sprayer does after a few fills of degreaser.

Workshop uses include degreasers, brake and parts cleaner, tyre shine, release agents and maintenance chemicals. If you're spraying something outside that list, such as a strong acid, check its compatibility with PA, FKM and stainless before filling.

Should I choose the Hobby or the Profi sprayer?

The Profi if you spray larger areas or share one bottle across the bay; the Hobby for smaller jobs. The difference is capacity: the Profi takes a 1.5 L fill, the Hobby a 0.9 L working fill.

Both deliver about 300 mL/min at 3 bar, with a 60° fine spray or a jet reaching up to 4 m, and both have a fill scale in litres, pints and gallons with mixing-ratio markings. The Profi also has an optional 360° spray function for awkward and upside-down spraying.

What temperature range are the sprayers approved for?

Both are approved for -5 °C to +30 °C. Outside that range the maker doesn't approve the sprayer, so in summer keep it out of a closed ute cab and direct sun, and in winter don't leave it in a freezing shed.

Both are pumped by hand to a maximum of 3 bar, with no battery or motor to fail, so temperature is the main limit on where you keep them.