Which oil or fluid do you need?
Start with the system you're servicing, then match the grade and spec in the manual.
- Engine oils: everything that goes in a sump, from passenger car synthetics to heavy-duty diesel, small engine, motorcycle and outboard oils.
- Gear oils: diffs, manual gearboxes, transfer cases and final drives, chosen by SAE gear grade and API GL rating.
- Transmission oils: automatic, CVT and heavy-duty powershift fluids, chosen by the transmission maker's spec.
- Hydraulic and industrial oils: hydraulic, industrial gear, compressor and tractor oils, chosen by ISO viscosity grade and duty.
- Grease: bearings, pins, bushes and chassis points, chosen by thickener and NLGI grade.
- Brake fluids: DOT-rated fluids for hydraulic brake and clutch systems.
- Coolant and radiator flush: premix and concentrate coolants, system flush and test strips.
How do you read an oil label?
Read the viscosity first and the performance spec second. The viscosity grade, such as 15W-40 for an engine oil or ISO VG 46 for a hydraulic oil, tells you how thick the oil is at a set temperature. The spec letters, such as API CK-4, ACEA E11 or an engine maker's approval code, tell you which tests the oil has passed. An oil can match the viscosity and still fall short on spec, and that is the mismatch warranty assessors look for.
Can you mix oils or top up with something different?
Top up with the same type and grade wherever you can. Mixing dilutes the additive package you chose, and some combinations don't belong together at all: silicone DOT 5 brake fluid with glycol fluids, different coolant chemistries, or greases with incompatible thickeners. When you change type, drain or flush the system rather than blending.
Moving bulk oil around the workshop? See oil pumps, reels and dispensing gear and grease pumps and guns, and change the oil filters at the same service. Stuck on a spec in the manual? Ask us.
