Box Style Diesel Fuel Filters & Separators (6)

Box-style diesel fuel filters and separators are self-contained units that bolt to the machine and carry their own housing, element and often a sight glass or bowl. They're found on older tractors, earthmoving gear, stationary engines and pumps, and on equipment where a spin-on head was never fitted. Formats include glass-bowl separators, all-metal units, dual-stage filters and bail-handle designs held by a wire clamp. Format and the number of stages are the choices that matter most. Put a metal unit where a glass bowl used to be and water can build up unseen until it reaches the injection pump. The checklist further down sorts out which format you need.

Box Style Diesel Fuel Filters & Separators

6 products

  • Baldwin BF909 Fuel/ Water Separator – Box Style, Dual Stage, Glass
    Vendor:
    Baldwin

    BF909 Fuel/ Water Separator- Box Style, Dual Stage, Glass

    Regular price $40.50 AUD
    Sale price $40.50 AUD Regular price
  • Fleetguard FS1205 Fuel/ Water Filter – Box Style, Glass
    Vendor:
    Fleetguard

    FS1205 Fuel/ Water Filter- Box Style, Glass

    1 in stock
    Regular price $52.90 AUD
    Sale price $52.90 AUD Regular price
  • Baldwin BF959 Fuel/ Water Separator – Box Style, Metal
    Vendor:
    Baldwin

    BF959 Fuel Filter- Box Style, Dual Stage, Metal

    2 in stock
    Regular price $52.50 AUD
    Sale price $52.50 AUD Regular price
  • Baldwin BF912 Fuel/ Water Separator – Box Style, Glass
    Vendor:
    Baldwin

    BF912 Fuel/ Water Separator, Box Style, Glass

    Regular price $55.50 AUD
    Sale price $55.50 AUD Regular price
  • Baldwin BF7912 Fuel Filter – Box Style, Bail Handle
    Vendor:
    Baldwin

    BF7912 Fuel Filter- Box Style, Bail Handle

    2 in stock
    Regular price $72.50 AUD
    Sale price $72.50 AUD Regular price
  • Baldwin BF7881 Fuel Filter – Box Style, Bail Handle
    Vendor:
    Baldwin

    BF7881 Fuel Filter- Box Style, Bail Handle

    Regular price $64.50 AUD
    Sale price $64.50 AUD Regular price

Glass bowl or metal body?

A glass bowl lets you see water and sediment at a glance, which makes daily checks quick. Metal bodies are less vulnerable to impact, but you'll need to drain them to check for water. If the old unit had a bowl, keep one.

Choosing a box-style unit

  • Single or dual stage: dual-stage units run a separator and a finer filter in one body. Match the stage count of the unit you're replacing.
  • Bowl material: glass, plastic or metal, to suit the location and how you check for water.
  • Mounting: bail-handle units are held by a wire bail and need the matching bracket.
  • Port size and thread: confirm the inlet and outlet before ordering.
  • Element or complete unit: check whether you need a replacement element or the whole assembly.

How do I service a box-style filter?

Drain the bowl first, clean around the housing, then change the element and seals together. Bleed the fuel system afterwards as described in the OEM manual. On many older machines this unit is the only water check, so keep the same format and stage count when you replace it.

If your machine takes a can rather than a box, see spin-on fuel water separators or fuel filter cartridge elements. Replacement bowls are in fuel filter bowls, heads and assemblies.

What's the difference between the BF909 and BF959 box-style separators?

Both are Baldwin dual-stage box-style units with an air-bleed vent and water drain. The BF909 has a glass body with a sight window, and the BF959 a steel body built for rougher service. The swap only works one way: the metal BF959 may be fitted where a BF909 goes, but don't fit the glass BF909 where a BF959 is specified, because glass can't take the knocks and pressure the metal unit is built for.

Which box-style element fits Separ housings, and which fits M.A.N. and Volvo?

The BF7881 is the square bail-handle element for Separ-style fuel/water separator housings and Case machines. The BF7912 is the bail-handle element for M.A.N. trucks and Volvo excavators, with an attached gasket that renews with the element. Both lift out by the wire bail without tools. They're the same height but differ in footprint, so measure the old element against the table below before ordering.

Why does my system run a BF912 alongside a BF909?

Because they do two halves of the water job. The BF912 is a coalescer: it gathers the fine water mist in the fuel into droplets heavy enough to fall. The BF909 separator alongside it sheds those droplets into its bowl, where you can see and drain them. Replace them as the pair your system uses. A coalescer without its separator leaves the water job half done.

How do I service a glass box-style fuel/water separator?

Drain water whenever it shows in the sight window, and bleed air out of the housing through the air-bleed vent after every element change. The BF909 and BF959 have both the vent and the drain built in. Fit replacements of the same body type, glass or metal, as the original specifies.