How do I size an air cleaner housing?
Size it on the engine's maximum airflow, given in cfm or cubic metres per minute by the engine maker. Each housing has a rated airflow band, and your engine's figure should sit inside it, ideally not right at the top. Bay space comes second. A housing that fits the gap but can't pass the air will cost you in restriction and filter changes.
Do I need a safety element?
Fit one wherever the machine works in dust or gets serviced in the field. The safety (secondary) element stays in place while the primary is out, so dirt knocked loose during a change can't fall into the clean side. It's a backstop, not a second filter to clean and reuse.
Plastic or metal?
Plastic housings are lighter, won't rust and suit most on-highway and ag work. Metal housings stand up better to knocks, heat and heavy dust on mining and construction gear.
- Engine airflow against the housing's rated band
- Dust load: light, medium or heavy
- Integrated pre-cleaner and vacuator valve
- Primary-only or primary and safety element
- Inlet and outlet size, orientation and mounting
- Clearance to remove the element
Browse by type:
- OptiAir air cleaners: compact housings with a built-in pre-cleaning stage
- Metal air cleaner housings: for heavy dust and hard knocks
Fit a restriction indicator to change elements on condition, secure the body with mounting bands, or talk to us about sizing.
