How does an automatic shut-off nozzle work?
A small sensing port near the spout tip draws in air while the tank fills. When fuel covers the port, the change in suction trips a valve and the nozzle snaps shut. That's why a bent or dirty spout can stop it working properly. Auto nozzles also need a minimum flow to sense the full tank, so very low flow such as gravity feed may not trip them reliably.
Automatic or manual nozzle?
Automatic for any pumped refuelling point, manual for gravity feed or low-flow drum work. An auto nozzle lets the operator check the machine while it fills and avoids the spills that come from looking away for a moment. A manual nozzle is simpler and suits setups where an auto nozzle won't trip.
How do I match a nozzle to my pump?
Start with flow, then connections. Run through this list:
- Rated flow at or above your pump's output
- Inlet thread and size to match your hose fitting
- Automatic shut-off or manual
- Swivel inlet to stop the hose twisting
- Spout diameter that suits your machines' filler necks
- Hook or holster to keep the spout clean between fills
Never use a diesel nozzle for AdBlue. Its internals aren't made for DEF, and diesel residue will contaminate the fluid.
Pair the nozzle with a diesel hose reel or an electric diesel transfer pump. For DEF, see dedicated AdBlue nozzles. Not sure which inlet you have? Ask us.