How does an air operated diaphragm pump work?
Compressed air pushes a pair of diaphragms back and forth, drawing fluid into one chamber while pushing it out of the other. An air valve switches the air between chambers, and check valves, usually balls against seats, keep the fluid moving in one direction. With no motor and no rotating shaft seal, there's nothing to burn out if the pump runs dry or dead-heads against a closed valve. Output pressure is roughly equal to the air pressure supplied, so the air regulator controls both flow and pressure.
Which materials suit my fluid?
Check the body, diaphragms, balls and seats against the fluid's compatibility data, not just one part. As a rough guide, polypropylene bodies suit many water-based chemicals, acids and alkalis, while aluminium and stainless steel suit oils, fuels and solvents. PTFE diaphragms resist the widest range of chemicals, nitrile (Buna-N) suits petroleum oils and fuels, and EPDM suits water-based fluids but not oils. For fuels and solvents, choose a conductive pump and earth it with a ground wire, because static can build up on a non-conductive plastic body.
BSP or NPT ports?
Buy the thread your plumbing already uses. BSP and NPT are both tapered pipe threads, but the thread angle and most pitches differ, so they may start by hand and then leak, or crack a plastic port when forced. Check these points before you order:
- Compatibility of body, diaphragm, ball and seat materials with your fluid
- Port size and the flow you need
- BSP or NPT thread, or flanged connections
- Fluid viscosity and any solids it carries
- Air pressure and volume your compressor can supply
- Conductive, groundable construction for flammable fluids
Add a regulator, air line filter or ground wire from transfer pump accessories, see air operated oil pumps for drum-mounted oil, or send us the SDS and we'll help check compatibility.
