Synthetic Gear Oil (3)

Synthetic gear oil for diffs, gearboxes, transfer cases and final drives under heavy load, high heat or extended drain intervals. Built on synthetic base stocks, it keeps its viscosity and film strength at temperatures where mineral oil thins, and flows more easily on a cold start, which cuts wear in the first minutes of running. Heavy towing, hot climates, high-horsepower trucks and fleets running long drains are where it pays off.

Choose by viscosity grade and API GL rating, then check any gearbox or axle maker's approvals, which matter most in heavy-duty drivelines. A heavier grade only belongs where the maker calls for it. Stretch drains past what the OEM allows and the extra protection gets spent on a worn crownwheel and pinion. The notes below explain the specs.

Synthetic Gear Oil

3 products

  • Valvoline 1368.28 HD TDL Pro 75W90 Synthetic Gear Oil 208L
    Vendor:
    Valvoline

    1368.28 HD TDL Pro 75W90 Synthetic Gear Oil 208L

    Regular price $4,000.00 AUD
    Sale price $4,000.00 AUD Regular price
  • Valvoline 1368.20 HD TDL Pro 75W90 Synthetic Gear Oil 20L
    Vendor:
    Valvoline

    1368.20 HD TDL Pro 75W90 Synthetic Gear Oil 20L

    Regular price $475.00 AUD
    Sale price $475.00 AUD Regular price
  • Valvoline 1220.20 SynGear 75W140 Synthetic Gear Oil 20L
    Vendor:
    Valvoline

    1220.20 SynGear 75W140 Synthetic Gear Oil 20L

    Regular price $469.00 AUD
    Sale price $469.00 AUD Regular price

When do you need synthetic gear oil?

When the OEM specifies it, or when the duty is severe. Many late-model diffs and gearboxes are factory filled with synthetic, and heavy-duty drivelines on extended drains usually require it. It also suits older vehicles that tow heavily or work in high heat, and machines that start in very cold conditions, where a synthetic reaches the gears faster than a thick mineral oil.

What are SAE J2360 and API MT-1?

They're tougher heavy-duty gear oil standards. SAE J2360 is a GL-5 level standard with extra performance and field testing, and many heavy truck axle makers ask for it. API MT-1 covers oils for non-synchronised manual transmissions in heavy trucks and buses, with added focus on thermal stability and seal compatibility. Neither replaces the GL rating; they sit on top of it.

Choosing a synthetic gear oil

  • Viscosity grade from the axle tag or manual.
  • API GL rating, plus SAE J2360 or MT-1 where the driveline maker asks for them.
  • Axle and gearbox maker approvals for heavy-duty drivelines.
  • Limited-slip compatibility.
  • Drain interval: extend only as far as the OEM allows.

Lighter duty? See semi-synthetic gear oil or mineral gear oil. To dispense from a drum, browse metered oil guns. Ask us to check a driveline approval.

Can I run one oil in my truck's gearbox and diffs?

Yes, with HD TDL Pro 75W-90, as long as each unit's maker approves it. It carries API GL-4, GL-5 and MT-1, and Valvoline developed it as one product for the complete driveline. It is listed for ZF gearboxes, Eaton axles, differentials and transfer boxes.

Two checks before you standardise:

  • Approvals: confirm the gearbox and the axles each list an approval TDL Pro holds.
  • Limited-slip diffs: TDL Pro is not suitable for limited-slip applications, so any LSD on the truck needs a different oil.

It comes in 20L and 208L.

Is HD TDL Pro approved for Scania, Volvo, MAN, ZF and Mercedes-Benz?

Scania, Volvo, MAN and ZF approvals are listed as approved on Valvoline's current data sheet. Mercedes-Benz is pending.

  • Scania: STO 1:0 and STO 2:0 A FS.
  • Volvo: 97312.
  • MAN: 341 type Z2 (ZF) and 342 type S1, plus 341 type E3 and 342 type M3.
  • ZF: TE-ML 05A, 12L, 12N, 16F, 17B, 19C and 21A (ZF001283).
  • Others: Meritor 0-76-N, Mack GO-J and SAE J2360.
  • Mercedes-Benz: MB 235.8 / DTFR 12B140 is shown as pending approval.

If your warranty requires the Mercedes-Benz approval specifically, check with us before you fill.

When should I use SynGear 75W-140?

When the diff maker specifies a 75W-140 GL-5 oil, and especially when the diff runs hot under towing, heavy haul or sustained high speed.

SynGear 75W-140 is a full synthetic hypoid oil carrying API GL-5, MT-1, Mack GO-J and SAE J2360. The synthetic base holds its film at temperatures where a mineral gear oil thins out.

Don't use it as a general upgrade for a diff that specifies 80W-90; the grade is heavier than that axle was designed for. We haven't confirmed SynGear for limited-slip diffs, so for an LSD use HP Gear Oil in the grade your manual lists.

Should I use SynGear 75W-90 or HD TDL Pro 75W-90 in my truck axles?

Pick by the approval your axle or gearbox maker lists. Both are full synthetic 75W-90s, but they are built for different jobs.

  • SynGear 75W-90: an axle oil to API GL-5 and MT-1 with an axle-maker spec list, including Dana SHAES-256 Rev E, Eaton PS-037, PS-163 and PS-109, Mack GO-J Plus, Meritor 0-76-E and N, O-80 and O-95, and Navistar MPAPS B-6821. It comes in 208L only.
  • HD TDL Pro 75W-90: carries GL-4 as well, so it can also go in the gearbox, with ZF, MAN, Scania and Volvo approvals, and it also lists Meritor 0-76-N and Mack GO-J for axles. It comes in 20L and 208L.

If your axles list Dana SHAES-256, Eaton PS-037, PS-163 or PS-109, Meritor O-80 or O-95, or Mack GO-J Plus and you fill from a drum, SynGear 75W-90 is the match. If you want one oil from gearbox to axles, or your trucks list ZF, MAN, Scania or Volvo approvals, use TDL Pro. TDL Pro is not suitable for limited-slip diffs, and SynGear 75W-90's data doesn't state limited-slip suitability.