Cartridge or spin-on: what's the difference?
A cartridge drops into a permanent housing, while a spin-on is a sealed can replaced whole. Many cartridges are metal-free, which makes disposal simpler, but the housing, lid and seals become part of the filter system and need looking after.
How to choose a fuel filter cartridge
Go by the part number off the old element or housing, then check these points.
- Micron rating: fit the rating the housing was designed for, not the nearest number on the shelf.
- Primary or secondary: two-stage systems take a coarser primary and a finer secondary, and they're not interchangeable.
- Water separation: separator cartridges have a water-shedding stage that plain fuel elements don't.
- Seals and O-rings: use the seals supplied with the new element, and don't reuse old ones that have taken a set.
- Single element or set: some engines need matched elements changed together.
Changing a cartridge without letting dirt in
Clean around the housing before opening it, and keep the new element in its packaging until you're ready. Many fuel systems need priming or bleeding after a change, so follow the OEM manual for your engine. Dirt dropped into the clean side of a housing goes straight to the injection system.
If your engine takes a disposable can, go to spin-on fuel filters or spin-on fuel water separators. Every format sits under fuel filters and water separators, and our team can check a number if the old element is unmarked.
