Lever or pistol grip grease gun?
Lever guns suit most workshop and farm greasing, because the long handle builds high pressure with less effort. Pistol grip guns are quicker to work with one hand and easier in cramped spots, but produce less pressure per stroke. Air and battery guns suit high-volume work where hand pumping slows you down.
How do you load a grease gun?
There are three common methods. Cartridge loading is the cleanest and quickest. Suction filling draws grease from a tub as you pull back the plunger. Loader filling uses a bulk loader pump to fill the barrel through a fitting. Whichever you use, bleed the air out before greasing or the gun will skip.
- Action: lever, pistol grip, air or battery.
- Maximum pressure, enough to clear stubborn or part-blocked fittings.
- Output per stroke, which affects how quickly a point fills.
- Outlet: rigid pipe for open access, flexible hose for points behind brackets.
- Coupler type and thread, BSP or NPT.
- Loading method: cartridge, suction or bulk loader.
How much grease is enough?
Follow the machine's service manual. Too little leaves the joint dry, while too much can blow out seals on some bearings.
Fit up with grease couplers, extensions and nipple kits, or step up to an air operated grease pump kit for bulk greasing.
