Mineral Gear Oil (6)

Mineral gear oil is the conventional choice for diffs, manual gearboxes and final drives on vehicles, trucks, tractors and machinery whose manufacturer lists a standard gear oil. Refined from crude rather than synthesised, it carries an extreme-pressure additive package for hypoid and other gear types and has long been the factory fill on older and general-duty drivelines. Under normal loads and temperatures, changed on the interval in the manual, it does the job well.

The deciding specs are the viscosity grade and the API GL rating. Too light a grade or the wrong rating leaves hypoid gears open to pitting, noise and bearing wear, while a heavier grade than specified makes shifts stiff in cold weather. The guide below explains when mineral gear oil fits.

Mineral Gear Oil

6 products

  • Valvoline 1398.20 HP Gear Oil 80W90 20L
    Vendor:
    Valvoline

    1398.20 HP Gear Oil 80W90 Mineral Gear Oil 20L

    1 in stock
    Regular price $199.00 AUD
    Sale price $199.00 AUD Regular price
  • Valvoline 1398.04 HP Gear Oil 80W90 4L
    Vendor:
    Valvoline

    1398.04 HP Gear Oil 80W90 Mineral Gear Oil 4L

    7 in stock
    Regular price $46.95 AUD
    Sale price $46.95 AUD Regular price
  • Valvoline 1398.28 HP Gear Oil 80W90 Mineral Gear Oil 208L
    Vendor:
    Valvoline

    1398.28 HP Gear Oil 80W90 Mineral Gear Oil 208L

    Regular price $1,800.00 AUD
    Sale price $1,800.00 AUD Regular price
  • Valvoline 1399.04 HP Gear Oil 85W140 4L
    Vendor:
    Valvoline

    1399.04 HP Gear Oil 85W140 Mineral Gear Oil 4L

    2 in stock
    Regular price $47.95 AUD
    Sale price $47.95 AUD Regular price
  • Valvoline 1399.20 HP Gear Oil 85W140 20L
    Vendor:
    Valvoline

    1399.20 HP Gear Oil 85W140 Mineral Gear Oil 20L

    2 in stock
    Regular price $199.00 AUD
    Sale price $199.00 AUD Regular price
  • Valvoline 1399.28 HP Gear Oil 85W140 Mineral Gear Oil 208L
    Vendor:
    Valvoline

    1399.28 HP Gear Oil 85W140 Mineral Gear Oil 208L

    Regular price $1,800.00 AUD
    Sale price $1,800.00 AUD Regular price

When is mineral gear oil the right choice?

When the manual lists a conventional gear oil and the unit works under normal duty. Daily drivers, older 4WDs, general farm machinery and trucks on standard drain intervals are typical. Heavy towing, high ambient temperatures or extended drains are where a semi-synthetic or synthetic earns its place.

Choosing the right viscosity grade

Use whatever the axle tag or manual lists. Heavier grades such as an 85W-140 are for hot-running, heavily loaded axles where the maker specifies them. They flow more slowly when cold, so a heavier grade isn't an automatic upgrade.

What to check before you buy

  • Viscosity grade from the axle tag or manual.
  • GL rating: GL-5 for most hypoid diffs, GL-4 where a manual gearbox specifies it.
  • Yellow metals: GL-5 oil in a box designed for GL-4 can attack brass synchros unless the oil is certified for both.
  • Limited-slip diffs: confirm the oil suits LSD use, or add the friction modifier the OEM specifies.
  • Drain interval: mineral oil shouldn't be stretched past the manual's schedule.

Working the axle harder? Step up to semi-synthetic gear oil or synthetic gear oil. For drum dispensing, see manual oil pumps. Missing axle tag? Ask us.

Should I use 80W-90 or 85W-140?

The one your manual specifies for that axle or gearbox. Don't swap between them to suit what's on the shelf.

In an SAE gear grade, the W number describes cold flow and the second number describes thickness at operating temperature. HP Gear Oil 85W-140 runs at about 25.7 mm²/s at 100 °C against about 14.5 for HP Gear Oil 80W-90, so it holds a much heavier film when hot. That's why it is specified for hot, heavily loaded diffs under towing and heavy work.

Putting 80W-90 in a unit that specifies 85W-140 leaves it running a thinner film than it was designed for. If you want to move long-haul truck diffs off 85W-140, look at DuraGear HD 80W-90 and the conditions Valvoline sets for that change.

Where can HP Gear Oil go besides the diff?

Anywhere the vehicle maker specifies an API GL-5 oil in the matching grade. Valvoline lists these uses on passenger cars, 4WDs, SUVs and light and heavy commercials:

  • Hypoid differentials, including limited-slip diffs.
  • Manual gearboxes.
  • Transfer cases.
  • Transaxles and spiral bevel rear axles.

The catch is the gearbox spec. If the manual calls for GL-4 in the gearbox, HP Gear Oil is the wrong oil there. Use DuraGear 75W-85 where 75W-85 GL-4 is listed.

Does HP Gear Oil meet Meritor and Mack axle specifications?

Yes. Both grades carry API GL-5, API MT-1, Mack GO-J, SAE J2360 and MIL-PRF-2105E, and each has a Meritor listing:

Meritor lists a different O76 letter for each grade, so check that the letter in your axle manual matches the grade you're ordering. If your truck needs an extended-drain Meritor or Eaton approval, look at the synthetic oils in our gear oils range.

Can I use HP Gear Oil in tractor axles and final drives?

Yes, where the tractor maker specifies a GL-5 gear oil for a separate axle or final drive housing. Valvoline lists HP Gear Oil 80W-90 and 85W-140 for front axles, rear axles and final drives in its agricultural range.

No, where that housing shares oil with the transmission, hydraulics or wet brakes. Those tractors are built around a universal tractor transmission oil (UTTO), such as Unitrac 80W or Farmplus Hydratrans from our agricultural oils, and the manual will say so.