Penetrant, lubricant or corrosion inhibitor?
Pick by what the metal has to do next. A penetrant is very thin so it wicks into rusted threads and joints; give it time to soak before you put a spanner on. A multi-purpose spray lubricant displaces moisture and gives light lubrication and short-term protection. A corrosion inhibitor leaves a heavier soft wax or lanolin film for storage and exposed metal, and needs reapplying after washdowns. Chain lubricants are tacky so they cling and resist fling-off.
Do I need a food grade lubricant?
Yes, wherever the lubricant could come into contact with food or packaging. Look for NSF H1 registration, which covers lubricants for incidental food contact in food processing and handling areas.
- Job: free a seized part, lubricate, or protect stored metal.
- Film type: dry, wet, waxy or lanolin, depending on dust, water and contact.
- Environment: salt, rain, washdown or dusty paddock work.
- Material compatibility: check before spraying near rubber seals, plastics or paint.
- Format: aerosol for the toolbox, bulk pack with applicator for large areas.
Where shouldn't I spray lubricant?
Keep it off brake pads, rotors, clutch faces and drive belts, where any oil film cuts grip. Most aerosol propellants are flammable, so keep cans away from heat, sparks and hot exhausts.
For bearings and pins that need more than a spray, see grease and grease equipment. Clean surfaces first with brake parts cleaner and degreaser, or ask us which product suits your job.
