Hydraulic Filter Kits & Assemblies (2)

Hydraulic filter kits add filtration to an existing hydraulic or lube oil system without rebuilding it, with the head, filter and fittings supplied together, ready to plumb in. They suit machines that need more capacity or finer filtration than the original setup, attachments and power units being added to a circuit, and offline or kidney-loop cleaning on tanks. Flow and working pressure are the specs that decide the fit, followed by port type. A kit rated for return-line pressure must never go on the pressure side of the pump, where it can burst or leak. Undersize it for the flow and it spends its life in bypass. Sizing and connection details follow below the products.

Donaldson – X900017 – dual Duramax hydraulic filter kit – front view

2 products

  • Donaldson – K051153 – FBK160/200 hydraulic filter assembly, 1-1/4 in BSPP – front and side view
    Vendor:
    Donaldson

    K051153 Hydraulic Filter Assembly, FBK160/200, 1-1/4" BSPP Ports, 22 psi Bypass, with P550148 Filter

    Regular price $216.40 AUD
    Sale price $216.40 AUD Regular price
  • Donaldson – X900017 – dual Duramax hydraulic filter kit – front view
    Vendor:
    Donaldson

    X900017 Hydraulic Filter Kit, Dual Duramax Spin-On, 378 L/min, 11 Micron, SAE 4-Bolt / BSPP Ports

    Regular price $1,626.10 AUD
    Sale price $1,626.10 AUD Regular price

What's in a hydraulic filter kit?

Usually a filter head, one or more spin-on filters and the fittings to plumb it in. Many kits also include ports for a service indicator or test points for oil sampling, which make condition-based servicing simple.

How do I size a hydraulic filter kit?

  • Flow rate: size the kit for the maximum flow through that line, not the average. Dual-filter heads handle more flow with less pressure drop.
  • Working pressure: return, low and medium pressure kits are not for the pump's pressure line.
  • Micron and efficiency: match the cleanliness target your machine or component maker specifies.
  • Port type: BSPP, NPT, SAE O-ring boss or SAE flange ports. Match the plumbing, or plan for adaptors.
  • Bypass and indicators: choose a bypass head where cold starts or high flows are expected, and fit an indicator so you know when to change.

Where should an add-on filter go?

Most add-on kits go in the return line or in a separate kidney loop with its own pump, where pressure is low and the whole oil volume passes through over time. Keep the filter accessible for changes and sampling, and support the head on a solid mount rather than letting the hoses carry it.

Replacement cans are in spin-on hydraulic filters, single heads in hydraulic filter heads and condition gauges in service indicators. Talk to us about sizing for your circuit.

Which kit do I need: the X900017 or the K051153?

Pick by flow and by how clean the oil needs to be.

  • X900017: a dual Duramax head with two P170949 spin-ons rated Beta 1000 at 11 micron, for up to 378 L/min at 350 psi (24.1 bar) maximum operating pressure. It has a 25 psi bypass, visual condition indicators on both sides and two test points for oil samples, with 1-1/2" SAE 4-bolt flange ports and adaptor flanges to 1-1/2" BSPP in the box. Donaldson builds it for crushers, screening plants and other equipment working in extreme conditions.
  • K051153: a single FBK160/200 head with 1-1/4" BSPP ports and a 22 psi (1.5 bar) bypass, supplied with a P550148 36 micron cellulose can, for up to 140 L/min at 10 bar. It has no indicator ports, so cans are changed on hours. It's cross-referenced to Sauer Sundstrand 1510182, Modina AMF301CDB10B6 and UCC Hydraulics MXA9511424, if you're replacing one of those.

What do I re-buy for these kits, and is anything else needed?

Replacement cans, plus a hose if you want to sample from the X900017.

  • X900017: two P170949 Duramax spin-ons per change. Sampling from the test points needs Donaldson's 1,220 mm M16 x 2 test point hose assembly, sold separately; it isn't on our site yet, so ask us for it. Allow 25 mm under the filters to spin them off.
  • K051153: any FBK160/200 can. For cleaner oil than the supplied 36 micron cellulose, step to the 11 micron Synteq P171613 or the longer P171618; where water is the problem, the water-absorbing P579099. To watch the can loading, the P761314 head takes the same cans and has a top indicator port.