AdBlue Transfer Accessories (1)

AdBlue transfer accessories are the smaller parts that finish off and protect a DEF dispensing setup, such as IBC covers. They matter more than their size suggests, because diesel exhaust fluid is easily contaminated and corrodes many common fitting materials. Choose parts made for AdBlue, in stainless steel or suitable plastics, and match every thread to your IBC valve, pump and hose.

An IBC sitting uncovered outside also cops dust, rain and heat. Dirt that settles around the valve and lid works its way into the fluid, and heat shortens AdBlue's shelf life. Check the thread and material on anything that touches the fluid before it goes into the system.

AdBlue Transfer Accessories

1 product

  • Bluequip AF-AE-IBCCOVER 1000L IBC cover fitted over an AdBlue IBC
    Up to $38.70 off
    Vendor:
    Bluequip

    AF-AE-IBCCOVER Bluequip 1000L IBC Cover for AdBlue IBCs

    Regular price $156.00 AUD
    Sale price $156.00 AUD Regular price $194.70 AUD

What accessories does an AdBlue IBC setup need?

At a minimum, a way to connect the pump to the IBC and a way to keep the IBC clean. Depending on the setup, that might mean a valve adaptor or suction lance, DEF-rated hose and fittings, a breather that keeps dust out while letting air in, and a cover over the whole container. IBC valve threads vary between makers, so check yours before ordering an adaptor.

Why cover an AdBlue IBC?

A cover keeps sun, rain and dust off the container. Sunlight heats the fluid and, over time, breaks down the plastic bottle itself. Rainwater and grit pool on top and around the valve, and some of it ends up in the AdBlue each time the lid or valve is opened. A cover is cheap protection for a full IBC of DEF.

What should I check on any AdBlue fitting?

Material first, then fit. Brass, copper and zinc-plated parts look the same as stainless at a glance but corrode in AdBlue. Use this list:

  • Wetted material: stainless steel or a DEF-rated plastic
  • Thread type and size against the mating part
  • Seal material suited to AdBlue
  • Size and fit for your IBC or tank
  • UV resistance for outdoor storage
  • Kept for AdBlue only once fitted

For the rest of the setup, see AdBlue pumps and transfer kits, AdBlue nozzles and AdBlue hose reels. Need a thread matched? Send us the details.

Will the IBC cover fit my IBC with a pump kit mounted?

Yes, on a standard 1000L IBC. The Bluequip AF-AE-IBCCOVER fits over the cage and seals at its edge, and a 240V electric pump kit can stay mounted on the side of the IBC with the cover in place. A-FLO doesn't publish the cover's fitted dimensions, material or UV rating, so confirm your IBC is a standard 1000L cage before ordering.

It reduces the effect of direct sunlight on the AdBlue and keeps the space inside more stable as outside temperatures change, in storage or on a truck between sites. That matters because heat shortens AdBlue's shelf life (see AdBlue Fluid). It weighs 2 kg and goes on and off easily when you need to get at the IBC.

To dispense from a covered IBC, the AF-FP-101320 Pro kit mounts on the IBC side.

Do you sell AdBlue fittings, adaptors and suction kits?

Not as listed parts, but we can supply them. Send us the thread size and type on each side of the joint (for example a 1" BSP meter onto 3/4" hose, or a drum or IBC suction kit for the 24V pump kit) and we'll match a part.

Whatever you fit must be AdBlue-compatible: stainless steel or a compatible plastic, never brass or galvanised. The full list of materials to avoid is on AdBlue Equipment. Check every adaptor, nipple and hose tail you add, because a single wrong fitting corrodes and carries metal into the SCR system.