Manual & Metered Oil Dispensing Guns (20)

Oil dispensing guns and meters control the oil at the end of the hose, so the right amount goes into the sump, gearbox or hydraulic tank. Manual guns simply open and close the flow, electronic meters record every litre, and preset meters stop on their own at the volume you set. Workshops that charge oil to jobs, fleets tracking usage and lube trucks all rely on them. The deciding factors are whether you need metering, and whether the gun is rated for your fluid and flow. A meter set up for one fluid can read wrong on another, and a high-flow gun on a small pump just dispenses slowly. If oil is billed by the litre, buy a meter. More on choosing is below.

Manual & Metered Oil Dispensing Guns

20 products

  • Graco 25C903 EM8 Electronic Manual Oil Meter, Rigid Extension – left-front view
    Vendor:
    Graco

    25C903 EM8 Electronic Manual Oil Meter, Rigid Extension

    Regular price $571.80 AUD
    Sale price $571.80 AUD Regular price
  • Graco 25C904 EM8 Electronic Manual Oil Meter, Flexible Extension – left-front view
    Vendor:
    Graco

    25C904 EM8 Electronic Manual Oil Meter, Flexible Extension

    Regular price $432.60 AUD
    Sale price $432.60 AUD Regular price
  • Graco 25C918 EM20 Electronic Manual Oil Meter, Flexible Extension – left-front view
    Vendor:
    Graco

    25C918 EM20 Electronic Manual Oil Meter, Flexible Extension

    Regular price $1,224.30 AUD
    Sale price $1,224.30 AUD Regular price
  • Graco 247723 XDV20 Oil Control Valve, Flexible Extension, 3/4" NPT – left-front view
    Vendor:
    Graco

    247723 XDV20 Oil Control Valve, Flexible Extension, 3/4" NPT

    Regular price $716.10 AUD
    Sale price $716.10 AUD Regular price
  • Graco 247721 XDV20 Oil Control Valve, Flexible Extension, 1/2" NPT – left-front view
    Vendor:
    Graco

    247721 XDV20 Oil Control Valve, Flexible Extension, 1/2" NPT

    Regular price $673.40 AUD
    Sale price $673.40 AUD Regular price
  • Graco 247722 XDV20 Oil Control Valve, Rigid Extension, 3/4" NPT
    Vendor:
    Graco

    247722 XDV20 Oil Control Valve, Rigid Extension, 3/4" NPT

    Regular price $673.40 AUD
    Sale price $673.40 AUD Regular price
  • Graco 273157 PM8 Electronic Preset Oil Meter, Flexible Extension – right-front view
    Vendor:
    Graco

    273157 PM8 Electronic Preset Oil Meter, Flexible Extension

    Regular price $906.70 AUD
    Sale price $906.70 AUD Regular price
  • Graco 25C905 EM8 Electronic Manual Gear Lube Meter, Gear Lube Extension – left-front view
    Vendor:
    Graco

    25C905 EM8 Electronic Manual Gear Lube Meter, Gear Lube Extension

    Regular price $497.90 AUD
    Sale price $497.90 AUD Regular price
  • Graco 25C919 EM20 Electronic Manual Oil Meter, Rigid Extension – left-front view
    Vendor:
    Graco

    25C919 EM20 Electronic Manual Oil Meter, Rigid Extension

    Regular price $1,224.30 AUD
    Sale price $1,224.30 AUD Regular price
  • Graco 25M407 SDM8 Electronic Manual Antifreeze Meter, Flexible Extension – left-front view
    Vendor:
    Graco

    25M407 SDM8 Electronic Manual Antifreeze Meter, Flexible Extension

    Regular price $1,501.50 AUD
    Sale price $1,501.50 AUD Regular price
  • Graco 25M405 SDM8 Electronic Manual Antifreeze Meter, Rigid Extension – left-front view
    Vendor:
    Graco

    25M405 SDM8 Electronic Manual Antifreeze Meter, Rigid Extension

    Regular price $1,501.50 AUD
    Sale price $1,501.50 AUD Regular price
  • Graco 25M413 SDM8 Electronic Manual Gear Lube Meter, Gear Lube Extension – left-front view
    Vendor:
    Graco

    25M413 SDM8 Electronic Manual Gear Lube Meter, Gear Lube Extension

    Regular price $1,501.50 AUD
    Sale price $1,501.50 AUD Regular price
  • Graco 25M406 SDM8 Electronic Manual Oil Meter, Flexible Extension – left-front view
    Vendor:
    Graco

    25M406 SDM8 Electronic Manual Oil Meter, Flexible Extension

    Regular price $1,501.50 AUD
    Sale price $1,501.50 AUD Regular price
  • Graco 25M404 SDM8 Electronic Manual Oil Meter, Rigid Extension – left-front view
    Vendor:
    Graco

    25M404 SDM8 Electronic Manual Oil Meter, Rigid Extension

    Regular price $1,501.50 AUD
    Sale price $1,501.50 AUD Regular price
  • RAASM 33146 Digital Metered Oil Gun, Hi-Volume, Flexible Outlet, 75 lpm
    Vendor:
    RAASM

    33146 Digital Metered Oil Gun, Hi-Volume, Flexible Outlet, 75 lpm

    Regular price $1,922.80 AUD
    Sale price $1,922.80 AUD Regular price $1,922.80 AUD

Manual gun or electronic meter?

Choose a meter wherever oil is charged out, counted for stock or audited. A manual gun is fine for straight top-ups where nobody needs the figure. Preset meters go a step further: dial in the volume and the meter shuts off by itself, which speeds up oil changes and stops overfills.

What to check on an oil meter

  • Fluid compatibility: engine oil, gear oil, ATF, antifreeze or other fluids. Check the listing names yours.
  • Flow rating, matched to what your pump and hose can deliver.
  • Maximum working pressure, above your pump's outlet pressure.
  • Inlet thread and swivel, BSP or NPT, to suit your hose.
  • Extension and nozzle: rigid for open fillers, flexible for tight engine bays.
  • Calibration: most electronic meters can be recalibrated, which is worth doing when you change fluid.

Why does my oil meter read wrong?

The usual causes are the wrong fluid for the meter's setting, air in the line or a meter that's never been calibrated. Bleed the line after changing a drum, and check the reading against a known volume from time to time.

Make sure your air operated oil pump and oil hose reel can deliver the flow your gun is rated for. Ask us if you're unsure which meter suits your oils.

Do I need a metered gun, a preset meter or a manual gun?

Metered if oil is charged to jobs, tracked for stock or recorded against a service; preset if you want the gun to stop at a set volume; manual if you're only topping up.

  • Metered (manual dispense): the gun shows what went into the machine and keeps a running total for stock reconciliation. The operator still decides when to let go.
  • Preset: the Graco PM8 takes the volume you enter, latches, and releases the trigger at the preset, with an add-on limit that caps any top-off. That's the one to stop sumps being overfilled while the tech does something else.
  • Manual: no meter in the path, so the gun passes the full flow of the line: Graco's XDV20 valves flow up to 75.7 lpm.

The comparison table below groups every gun by type. If you're unsure, a metered gun does everything a manual gun does and also gives you the record.

Rigid, flexible or gear lube extension: which do I need?

Pick the extension by how you reach the filler, because it's the part that decides whether the oil goes in cleanly.

  • Rigid: for open fillers with straight access, where a fixed spout is easiest to aim. Examples: the EM8 25C903, EM20 25C919, SDM8 25M404 and the XDV20 247722.
  • Flexible: follows fillers set at an angle or behind components. Examples: the EM8 25C904, EM20 25C918, SDM8 25M406 and the complete RAASM and Ultraflo guns, which all have flexible outlets.
  • Gear lube: Graco's gear lube extension with a non-drip quick-close nozzle, on the EM8 25C905 and SDM8 25M413, for diffs and gearboxes.

If one meter serves both kinds of filler, the flexible extension is the safer pick. Graco sells replacement extension kits (255921 rigid and 255859 flexible for the XDV20, 255854 gear lube for the EM8); ask us if you want to change one later.

What do I need to do before using a new metered gun?

Check the units, fit the right batteries, and check the reading against a known volume.

  • Units: the Graco EM8, EM20, SDM8 and PM8 leave the factory set to quarts. Switch them to litres before the first dispense, or every fill on the job card will be in the wrong unit.
  • Batteries: the EM8 and EM20 take 2 × AAA (alkaline or lithium). The SDM8 takes 4 × AA, and Graco rates its 6-month battery life on Energizer E91 alkaline. The PM8 takes 4 × AA and needs lithium below -18 °C. The AF-FP-984330 comes with its 2 × AAA, and the AF-A-102111B runs on a 3 V CR123A.
  • Calibration: Graco states the SDM8's ±0.5% at 9.5 lpm, 21 °C and 10W oil, and notes it may need calibrating, so dispense into a measured container before charging fills to any gun. The AF-FP-984330 has an easy calibration and electronic reset.
  • Lines: flush the lines before fitting a Graco meter. The SDM8 takes a strainer kit, 25D906 for oil and ATF or 25U000 for antifreeze.

Can a metered gun keep a record of each fill?

Yes, though how much it keeps varies, so pick by what you need to prove later.

  • RAASM 33146: logs up to 2,000 dispensing operations with date and time, which suits job costing and charge-back.
  • Graco SDM8 (25M404 and family): resettable and non-resettable totalisers, so a shift total can be cleared without losing the lifetime figure.
  • AF-A-102111B and AF-FP-984330: a resettable batch total for the fill in front of you, and a lifetime total for stock reconciliation.
  • Graco EM8 and EM20: the display counts each dispense, with a totaliser to 19,999 units.

If each fill has to be traced to a machine or job later, the 33146's dated log is the one that keeps it.

Which meters suit a lube truck, wash-down bay or cold site?

The Graco EM8, EM20 and PM8, because they're sealed to IP69K and rated for indoor and outdoor use. The SDM8 is the indoor meter.

  • EM8 and EM20: IP69K sealing against pressure washing, rated -30 °C to 82 °C, indoors or out. Graco lists them for lube trucks and mining.
  • PM8 preset (273157): IP69K, indoor or outdoor, rated -29 °C to 52 °C. Use lithium batteries below -18 °C.
  • SDM8: Graco recommends it for indoor use and doesn't publish an IP rating, so keep it in the workshop.
  • AF-FP-984330: IP65 with rubber protection.
  • XDV20 valves: no electronics, rated -40 °C to 82 °C indoors or out, for an unmetered point on a truck.

A meter on a truck also takes knocks: the PM8 has an optional 273181 impact guard.