Clean & Dry / Racor FBO Replacement Filters (9)

Clean & Dry replacement filters are the elements that go back into a bulk fuel or oil dispensing housing once the old one has loaded up. Clean & Dry is Donaldson's bulk filtration system, and this collection also holds replacements for Racor FBO dispensing housings. Workshops, depots and sites running fixed filtration rely on them to keep stored diesel, hydraulic oil and lubricants clean at the point of fill. Three things decide the right element: the housing it fits, the fluid it's rated for, and whether it removes particulate, water or both. Fit a fine fuel element on gear oil and flow collapses. Fit a coarser one than the system was designed for and the dirt you were stopping goes straight through. Match the housing first, then the fluid.

Clean & Dry / Racor FBO Replacement Filters

9 products

  • Donaldson DBB0248 CLFS Filter for Ethanol-Free Fluids – Water Absorbing Media, 20um, 246 Lpm
    Vendor:
    Donaldson

    DBB0248 CLFS Filter for Ethanol-Free Fluids, Water Absorbing Media, 20um, 246 lpm

    1 in stock
    Regular price $271.20 AUD
    Sale price $271.20 AUD Regular price
  • Donaldson DBB8777 CLFS Winter Fuel Filter for All Diesel Fuels, 7um, 246 lpm
    Vendor:
    Donaldson

    DBB8777 CLFS Winter Fuel Filter for All Diesel Fuels, 7um, 246 lpm

    Regular price $293.60 AUD
    Sale price $293.60 AUD Regular price
  • Donaldson P575830 High Performance DERT Filter Cartridge – 7um, All Diesel Fuels and Light Oils
    Vendor:
    Donaldson

    P575830 High Performance DERT Filter Cartridge, 7um, All Diesel Fuels and Light Oils

    Regular price $759.60 AUD
    Sale price $759.60 AUD Regular price
  • Donaldson P581575 Fuel Dispensing Coalescer/ Separator Filter 10um
    Vendor:
    Donaldson

    P581575 Fuel Dispensing Coalescer/ Separator Filter 10um, Racor FBO Series Replacement, FBO 60356

    Regular price $731.60 AUD
    Sale price $731.60 AUD Regular price
  • Donaldson DBB7733 CLFS Compact Filter for All Diesel Fuels – 7um, 122 Lpm
    Vendor:
    Donaldson

    DBB7733 CLFS Compact Filter for All Diesel Fuels, 7um, 121 lpm

    Regular price $247.90 AUD
    Sale price $247.90 AUD Regular price
  • Donaldson DBB8666 CLFS Filter for All Diesel Fuels – 4um, 246 Lpm
    Vendor:
    Donaldson

    DBB8666 CLFS Filter for All Diesel Fuels, 4um, 246 lpm

    1 in stock
    Regular price $293.60 AUD
    Sale price $293.60 AUD Regular price
  • Donaldson DBB8665 CLFS Filter for Hydraulic and Transmission Oils – 7um, 246 Lpm
    Vendor:
    Donaldson

    DBB8665 CLFS Filter for Hydraulic & Transmission Oils, 7um, 246 lpm

    Regular price $271.20 AUD
    Sale price $271.20 AUD Regular price
  • Donaldson DBB8664 CLFS Filter for Engine and Gear Oils – 25um, 246 Lpm
    Vendor:
    Donaldson

    DBB8664 CLFS Filter for Engine & Gear Oils, 25um, 246 lpm

    Regular price $271.20 AUD
    Sale price $271.20 AUD Regular price
  • Donaldson DBB5333 CLFS Compact Filter for All Diesel Fuels – Coolants and Light Oils, 4um, 122 Lpm
    Vendor:
    Donaldson

    DBB5333 CLFS Compact Filter for All Diesel Fuels, Coolants & Light Oils, 4um, 122 lpm

    Regular price $247.90 AUD
    Sale price $247.90 AUD Regular price

When should I change a bulk filter element?

When the differential pressure gauge or restriction indicator says so, or at the interval the housing maker recommends. Elements load gradually, so flow falls off before most people notice. Water-absorbing elements need closer watching: once the media is saturated it stops holding water and restricts flow, so change them as soon as restriction climbs.

Particulate, coalescing or water-absorbing?

Each handles a different contaminant. Particulate elements trap dirt to a set micron rating. Coalescing elements merge fine water droplets so they separate and drain out. Water-absorbing media locks free water into the element itself and suits final-stage protection before the nozzle. Check fluid compatibility too, as not every media suits every fuel blend or oil.

Choosing a replacement element

Start with the part number on the old element or the housing.

  • Housing model and element size, compact or full-size
  • Fluid: diesel, hydraulic, transmission, engine or gear oil, or coolant
  • Micron rating matched to the original element
  • Function: particulate, water separation or water absorption
  • Rated flow against your pump output
  • Whether new seals or O-rings are needed at each change

For complete systems, see bulk tank filter kits and bulk filter heads, compare portable filter carts, or send us the part number off your old element.

Do the DBB spin-on elements fit Racor FBO housings?

Not that we can confirm. The DBB elements are spin-ons for Donaldson Clean Solutions filter heads, which is what our dispenser kits and carts use, and Donaldson lists them for those heads. Putting an element in a housing it wasn't designed for risks a poor seal and unfiltered fuel getting past.

For a Racor FBO-14 series housing, our replacement is P581575, a 10 micron coalescer/separator that cross-references to Racor FBO 60356. If your FBO housing takes a different element, send us the housing model and the part number off the old element and we'll match it.

Why has my DBB0248 water-absorbing filter stopped flowing?

Most likely it has done its job. The DBB0248 uses super-absorbent polymer media and is designed to stop flow when it meets a large amount of free water, rather than let that water through to the machine. Replace the element, then find and remove the water at its source before you dispense again. It is rated for ethanol-free fluids only.

Can I run a fuel element on oil, or an oil element on diesel?

No, match the element to the fluid. The fuel elements (DBB5333, DBB7733, DBB8666, DBB8777) are for diesel, with a recommended viscosity under 100 cSt. For oil, DBB8665 suits hydraulic and transmission oil up to 500 cSt, and DBB8664 suits engine and gear oil up to 3,000 cSt.

A fuel element on thick oil runs a high pressure drop, and Donaldson warns that too high a drop can cut system flow or damage the filter.

Can I upgrade my X900098 dispenser kit to 4 micron?

Yes. The DBB5333 is a compact 4 micron element, the same 119 mm x 191 mm size as the DBB7733 the kit runs, and Donaldson lists both for the kit's P570329 head. The swap takes it from ISO 16/14/11 to 14/13/11 in a single pass, and both elements carry the same 121 lpm flow rating.

If you have room under the head and need more flow, the head also takes the full-length DBB8666, 362 mm long and rated to 246 lpm.