Transfer Pump Accessories (15)

Transfer pump accessories are the parts that set up, protect and complete an air operated diaphragm pump installation: air pressure regulators and gauges, air line filters, master air valves, suction kits and ground wires. Workshops and plants fit them to control the pump, keep its air supply clean and make it safe to run. Match each part to your pump model, and check the thread on your air line and fluid ports, since many pumps use NPT rather than BSP fittings.

Dirty, wet air is hard on a pump's air valve, and a pump run without a regulator works harder than the job needs. Skip the ground wire on a pump moving fuel or solvent and static has nowhere to go.

Graco 110225 1/2 inch NPT bleed-type master air valve for Husky diaphragm pumps with yellow lever handles

15 products

  • Graco 110146 Air Line Filter, 1/4" NPT, 20 Micron, Husky 515 & 716 Pumps
    Vendor:
    Graco

    110146 Air Line Filter, 1/4" NPT, 20 Micron, Husky 515 & 716 Pumps

    Regular price $193.90 AUD
    Sale price $193.90 AUD Regular price
  • Graco 106148 Air Filter, 3/8" NPT, Auto Drain, Husky 1050 & Fire-Ball 300
    Vendor:
    Graco

    106148 Air Filter, 3/8" NPT, Auto Drain, Husky 1050 & Fire-Ball 300

    Regular price $240.30 AUD
    Sale price $240.30 AUD Regular price
  • Graco 106149 Air Line Filter, 1/2" NPT, 5 Micron, Manual Drain, Husky 1590
    Vendor:
    Graco

    106149 Air Line Filter, 1/2" NPT, 5 Micron, Manual Drain, Husky 1590

    Regular price $233.30 AUD
    Sale price $233.30 AUD Regular price
  • Graco 110147 Air Regulator & Gauge, 1/4" NPT, 0–11 bar, Husky 515 & 716
    Vendor:
    Graco

    110147 Air Regulator & Gauge, 1/4" NPT, 0–11 bar, Husky 515 & 716

    Regular price $142.80 AUD
    Sale price $142.80 AUD Regular price
  • Graco 106150 Air Line Filter, 3/4" NPT, 40 Micron, Husky 2150 & 3300
    Vendor:
    Graco

    106150 Air Line Filter, 3/4" NPT, 40 Micron, Husky 2150 & 3300

    Regular price $489.80 AUD
    Sale price $489.80 AUD Regular price
  • Graco 207651 Air Regulator Install Kit, 3/4" NPT, Husky 3300
    Vendor:
    Graco

    207651 Air Regulator Install Kit, 3/4" NPT, Husky 3300

    Regular price $1,351.40 AUD
    Sale price $1,351.40 AUD Regular price
  • Graco 244844 Air Regulator & Gauge, 1/2" NPT, Husky 1050 & Fire-Ball 425
    Vendor:
    Graco

    244844 Air Regulator & Gauge, 1/2" NPT, Husky 1050 & Fire-Ball 425

    Regular price $270.50 AUD
    Sale price $270.50 AUD Regular price
  • Graco 202858 Air Regulator Kit with Gauge, Husky 1590
    Vendor:
    Graco

    202858 Air Regulator Kit with Gauge, Husky 1590

    Regular price $451.70 AUD
    Sale price $451.70 AUD Regular price
  • Graco 222011 Ground Wire & Clamp, 7.6 m, Husky & Fire-Ball Pumps
    Vendor:
    Graco

    222011 Ground Wire & Clamp, 7.6 m, Husky & Fire-Ball Pumps

    Regular price $164.10 AUD
    Sale price $164.10 AUD Regular price
  • Graco 236054 Drum Suction Kit, 1.8 m Hose & Bung-Mount Drop Tube
    Vendor:
    Graco

    236054 Drum Suction Kit, 1.8 m Hose & Bung-Mount Drop Tube

    Regular price $1,015.50 AUD
    Sale price $1,015.50 AUD Regular price
  • Graco 238909 Ground Wire & Clamp, Aluminium Husky 1050, 2150 & 3300
    Vendor:
    Graco

    238909 Ground Wire & Clamp, Aluminium Husky 1050, 2150 & 3300

    Regular price $231.80 AUD
    Sale price $231.80 AUD Regular price
  • Graco 222916 Suction Hose Kit, 1-1/2" x 2.44 m, Husky 1590 & 2150
    Vendor:
    Graco

    222916 Suction Hose Kit, 1-1/2" x 2.44 m, Husky 1590 & 2150

    Regular price $1,956.10 AUD
    Sale price $1,956.10 AUD Regular price
  • Graco 206197 Air Pressure Regulator, 1/2" NPT, Husky 2150
    Vendor:
    Graco

    206197 Air Pressure Regulator, 1/2" NPT, Husky 2150

    Regular price $250.60 AUD
    Sale price $250.60 AUD Regular price
  • Graco 100960 Air Pressure Gauge, 0–14 bar, 1/4" NPT
    Vendor:
    Graco

    100960 Air Pressure Gauge, 0–14 bar, 1/4" NPT

    Regular price $83.40 AUD
    Sale price $83.40 AUD Regular price
  • Graco 110225 Bleed-Type Master Air Valve, 1/2" NPT
    Vendor:
    Graco

    110225 Bleed-Type Master Air Valve, 1/2" NPT

    Regular price $229.80 AUD
    Sale price $229.80 AUD Regular price

Do I need a regulator on a diaphragm pump?

In most installations, yes. A diaphragm pump's outlet pressure follows its air inlet pressure, so the regulator is how you set both flow and pressure. Running at the lowest pressure that does the job cuts wear on the diaphragms and saves compressed air. Never exceed the pump's maximum air inlet pressure.

Why fit a master air valve?

A bleed-type master air valve shuts off the air supply and releases air trapped between the valve and the pump. Trapped air can make the pump cycle unexpectedly while you're working on it, so many pump makers require one for safe maintenance. Fit it where it's easy to reach.

When does a pump need a ground wire?

Whenever it moves a flammable fluid or works where flammable vapour or dust may be present. Fluid moving through a pump and hose generates static, and without a path to earth that charge can spark. Earth the pump, the hose and the containers at both ends. Check these points when choosing accessories:

  • Pump model and series the part is listed for
  • Thread size and standard, NPT or BSP
  • Air filter micron rating and manual or auto drain
  • Regulator pressure range against the pump's maximum
  • Suction hose diameter and length
  • Ground wire length to reach a true earth

Find the pump itself in air operated diaphragm pumps, see the air operated AdBlue kits, or send us your pump model to confirm the right regulator kit.

Which accessories does Graco require on a Husky pump, and which are optional?

Graco's Husky manuals require a bleed-type master air valve and a ground wire; the filter and regulator are recommended.

  • Bleed-type master air valve (required): fits between the regulator and the pump and relieves air trapped between the valve and the pump, so the pump can't cycle unexpectedly during service.
  • Ground wire and clamp (required): connects the pump to a true earth ground to reduce the risk of static sparking. The hoses and the supply and receiving containers must be grounded too.
  • Fluid drain valve (required): fitted near the pump outlet. It isn't in this collection; ask us for one.
  • Air line filter and regulator (recommended): the filter keeps dirt and moisture out of the pump's air valve, and the regulator sets the pump's speed and fluid outlet pressure.
  • SD Blue 24G745 for AdBlue: its air must stay at or below 3.4 bar, so Graco adds an air safety valve set to that limit (124963 or 116306) to every SD Blue package. It isn't in this collection; ask for it with the pump.

From the air supply, fit them in this order: filter, regulator, master air valve, pump, as close to the pump as practical and with flow following the arrow on each body. The table shows the part for each Husky size.

Does the regulator come with a gauge and the master air valve?

Most come with a gauge; none of the separate regulators includes the master air valve.

  • Gauge included: the 110147 for the Husky 515 and 716, the 244844 for the Husky 1050 and the 202858 kit for the Husky 1590.
  • Gauge not included: the 206197 for the Husky 2150 is the regulator alone. Add the 100960 0–14 bar gauge in its 1/4" NPT port.
  • Everything in one kit: the 207651 for the Husky 3300 includes its regulator, gauge and a 3/4" bleed-type air valve.

With the 244844, 202858 or 206197, add the 110225 master air valve. The Husky 515 and 716 take the smaller 1/4" 110223, which is available on request.

Will these parts fit a BSP air line or a BSPT-port pump?

Only with adaptors, because every part here has NPT threads.

  • Air side: the filters, regulators and master air valve have NPT ports, so a BSP air line needs adaptors. Two size steps also catch people out: the 106148 filter is 3/8" while the Husky 1050 air inlet is 1/2" NPT, so it needs reducing bushings; and the 202858 kit's 3/8" NPT male outlet needs an adaptor to meet the 1/2" NPT ports on the pump and valve.
  • Fluid side: the 222916 suction kit is NPT throughout, so the BSPT versions of the Husky 1590 and 2150 need adaptors. Graco gives the 236054 kit's union as NPT only, so ask us to confirm the fit before ordering it for a BSPT-port pump.

The adaptors aren't in this collection; tell us your air line thread and pump version and we'll match them.

Do these accessories suit RAASM diaphragm pumps or Graco oil pumps?

They're Graco parts listed for Graco Husky pumps, and several also serve Graco's Fire-Ball oil pumps.

  • Fire-Ball oil pumps: the 106148 filter is listed for the Fire-Ball 300 5:1, the 106149 filter and 244844 regulator for the Fire-Ball 425 3:1 and 6:1, the 236054 suction kit for the 203876, and the 222011 ground wire is one of the required items on a Fire-Ball install. See air operated oil pumps.
  • RAASM AAB and APPB pumps: these take BSP air fittings. RAASM recommends a regulator, gauge and filter on the AAB air line, and the APPB is fed through a regulator. The Graco parts here aren't listed for them; the RAASM part numbers are on each RAASM pump page, and those shown without a link are available on request.